Xuewu Cheng

The characteristics and formation mechanisms of lightning activity during the lifetime of Super Typhoon Doksuri (2023) were investigated using ERA5 reanalysis data and observation data from the World-Wide Lightning Location Network (WWLLN) and Himawari-8/9 satellite. The lightning activity exhibited pronounced intermittent outbreak behavior, and intense lightning flashes mainly occurred in the outer rainband region approximately 200–600 km from the typhoon center. The occurrence of intense lightning was mainly related to the development of deep convections which were characterized by a high CAPE index and low cloud-top brightness temperature. In the landfall stage, intense lightning outbreaks may have been further modulated by the orographic lifting from the underlying surface and island thermal effects. Strong updrafts within the typhoon provided favorable conditions for intracloud microphysical electrification processes. The formation of intense lightning was interpreted via the non-inductive charging mechanism and validated using E-WRF model simulations. During the first rapid-intensification episode, intense inner-core lightning preceded the typhoon intensity peak by 14–41 h; during the re-intensification episode, it occurred ~9 h after the typhoon peak. These insights into the intense lightning activity in Super Typhoon Doksuri (2023) contribute to improving typhoon forecasting and disaster warning in the Western Pacific.

The 589 nm three-frequency lidar systems are widely employed for detecting atmospheric parameters in the mesosphere and lower thermosphere (MLT). Recently, the single-peak atomic frequency discriminator (SPAFD) has enabled 589 nm three-frequency lidars to measure wind fields in the stratosphere and mesosphere. However, research on their application for near-surface aerosol measurements remains limited. This paper proposes a method for diurnal aerosol detection using the 589 nm three-frequency lidar integrated with SPAFD. The specific configuration of the lidar system is described in detail, along with the retrieval algorithm for aerosol optical parameters derived from the three-frequency backscatter signals. Continuous 69-h observation results of the aerosol backscatter ratio are provided, followed by an analysis of the diurnal evolution of the planetary boundary layer (PBL) height. This approach enables existing 589 nm lidar systems to acquire aerosol diurnal detection capabilities without additional hardware costs or operational expenses. At present, the retrieval of aerosol extinction coefficients is constrained to altitudes above 10 km due to geometric overlap factor limitations. To overcome this, a dedicated low-altitude detection channel will be integrated in future iterations to enable full-altitude measurements. This advancement will establish the 589 nm lidar as a highly efficient tool for full-altitude, diurnal atmospheric detection.

Understanding the thermodynamic horizontal structure of the mesopause is essential for studying atmospheric wave dynamics and energy transport. However, conventional models like MSISE-00 exhibit some discrepancies from lidar observations in the mesopause. To obtain a more reliable horizontal temperature structure, this study integrates coordinated lidar observations from Urumqi, Yuzhong, and Yangbajing with models using a three-dimensional variational (3DVAR) data assimilation method to construct a high-resolution temperature field over northwestern China. The assimilated temperature profiles closely match lidar observations, with the RMSE (root mean square error) of residual reductions of 67.35% at Urumqi, 60.69% at Yuzhong, and 34.80% at Yangbajing. Independent validation at Korla showed a RMSE of residual reductions of 40.14%, confirming the model’s effectiveness. The thermodynamical horizontal structures of the mesopause obtained from this model were also analyzed. The lidar-based model for the mesopause extends the observation results from disparate lidar stations to the area between lidar stations and will contribute to a deeper understanding of upper atmospheric dynamics.

The transmission spectrum of a narrow-band interference filter is crucial and highly influenced by factors such as the temperature and angle, thus requiring precise and online measurements. The traditional method of measuring the transmission spectrum of an interference filter involves the use of a spectrometer, but the accuracy of this method is limited. Moreover, placing a narrow-band interference filter inside a spectrometer hinders real-time online measurements. To address this issue, there is demand for high-precision online spectral testing methods. In response to this demand, we propose and experimentally validate a fine spectral characterization method for narrow-band interference filters. This method uses a narrow-linewidth tunable laser, achieving a spectral resolution in the MHz range for online testing. Two types of narrow-band interference filters were tested using the constructed laser spectroscopy experimental system, obtaining a transmission spectrum with a spectral resolution of 318 MHz. In comparison to spectrometer-based methods, our proposed method demonstrates higher spectral accuracy, enables online measurements, and provides more accurate measurements for special spectral interference filters. This approach has significant application value and promising development prospects.

A prediction system was developed to determine the maximum Rayleigh altitude (MRA) by improving the automated detection of LIDAR power-on conditions and adapting to advancements in middle- and upper-atmosphere LIDAR technology. The proposed system was developed using observational data and nighttime sky imagery collected from multiple LIDAR stations. To assess the accuracy of predictions, three key parameters were employed: mean square error, root mean square error, and mean absolute error. Among the three prediction models created through multivariate regression and autoregressive integrated moving average (ARIMA) analyses, the most suitable model was selected for predicting the MRA. One-month predictions demonstrated the accuracy of the MRA with a maximum error of no more than 5 km and an average error of less than 2 km. This technology has been successfully implemented in numerous LIDAR stations, enhancing their automation capabilities and providing key technical support for large-scale, unmanned, and operational deployments in the middle- and upper-atmosphere LIDAR systems.

Through long-term Rayleigh lidar observations during 2010-2022, atmospheric gravity wave (AGW) activities in the middle atmosphere (30–65 km) are statistically investigated at Haikou (110.3°E, 19.9°N) in China. In total, 827 quasi-monochromatic AGW events are identified from the lidar dataset, and the vertical wavelength, observed wave period, and vertical propagation direction of dominant waves are extracted for each AGW event by analyzing the power spectra of wave-induced temperature perturbations. It is revealed that 81.7% of all AGW events were associated with upward-propagating waves, and the proportion of upward-propagating AGWs reached a maximum in autumn and a minimum in winter. The most common vertical wavelengths and wave periods were 6–11 km and 4–10 hours, respectively. In particular, 68 AGW events associated with simultaneous upward and downward propagating waves were observed by lidar, corresponding to 8.2% of the events. The occurrence of such special AGW phenomena is qualitatively discussed, and multiple formation mechanisms may exist. Comparisons are made with previously reported lidar observation results, and the statistical features of AGW activity in the low-latitude middle atmosphere may vary over a relatively wide range depending on the location and altitude. However, a majority of AGWs propagate upward in the middle atmosphere.

Based on the resonance fluorescence scattering mechanism, a narrowband sodium (Na) lidar can measure temperature and wind in the mesosphere and lower thermosphere (MLT) region. By using a narrowband spectral filter, background light noise during the day can be suppressed, allowing for continuous observations. To obtain full-diurnal-cycle temperature and wind measurement results, a complex and precise retrieval process is required, along with necessary corrections to minimize measurement errors. This paper introduces the design of a data acquisition unit for three frequencies in three directions of the Na lidar system in the Chinese Meridian Project (Phase II) and investigates the calibration and retrieval methods for obtaining diurnal temperature and horizontal wind in the MLT region, using a Na Doppler lidar with Faraday anomalous dispersion optical filter (FADOF). Furthermore, these methods are applied to observations conducted by a Na lidar in Beijing, China. The wind and temperature results over full diurnal cycles obtained from the all-solid-state Na Doppler lidar are reported for the first time and compared with temperature measurements from satellite, as well as wind observations from a meteor radar. The comparison demonstrates a reasonable agreement between the results, indicating the rationality of the lidar-retrieved results and the feasibility and effectiveness of the data correction and retrieval method.

We report an all-solid-state narrowband lidar system for the simultaneous detection of Ca and Ca⁺ layers over Yanqing (40.41°N, 116.01°E). The uniqueness of this lidar lies in its transmitter, which is based on optical parametric oscillation (OPO) and optical parametric amplification (OPA) techniques. The injection seeded OPO and the OPA are pumped by the second harmonic of an injection-seeded Nd:YAG laser, which can generate coherent light at the wavelength of 786 nm or 846 nm lasers, whose second harmonics in turn generate the 393 nm or 423 nm pulses, respectively, for the detection of thermospheric and ionospheric Ca⁺ and Ca layers. Compared to the conventional dye-based system, this lidar transmitter is a narrowband system (bandwidth < 200 MHz), which has produced a factor of two more output power with higher stability and reliability. The lidar system in Yingqing demonstrated Ca⁺ detection sensitivity of 0.1 atoms-cm⁻³ for long-term observation and reached a height of ~300 km. Potential applications and further improvements in this lidar technique are also discussed in this paper.