Seiya Shimono
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Research Interests
Seiya Shimono has a total of 154 co-authors. Here are the top co-authors by number of shared publications:
- Hiroki Yamada
Japan Synchrotron Radiation Research Institute Hyogo Japan
7 shared publications - Shogo Kawaguchi
Japan Synchrotron Radiation Research Institute (JASRI), Hyogo, Japan
4 shared publications Hiroki Ishibashi
Osaka Prefecture Univ, Grad Sch Sci, Dept Phys Sci, Sakai, Osaka 5998531, Japan
3 shared publications- Hironori Yamaguchi
Osaka Metropolitan University
3 shared publications - Kunihisa Sugimoto
Department of Chemistry, Kindai University, 3-4-1 Kowakae, Higashi-Osaka, Osaka 577-8502, Japan
3 shared publications - Yoshiki Kubota
Department of Physics Graduate School of Science Osaka Metropolitan University Osaka Japan
3 shared publications
Latest Publications
- 23 October 2026
- Published by AIP Publishing in The Journal of Chemical Physics
- Vol. 165 (16)
X-ray and neutron scattering studies on vapor-deposited amorphous hydrogen hydrate
Clathrate hydrates are rare inclusion compounds capable of forming both crystalline and amorphous states, making them ideal materials for studying the effects of environmental factors such as symmetry and volume on the motions of guest molecules. In this study, amorphous hydrogen hydrate (a-HH) was formed at 7 K by using a low-temperature vapor deposition (VD) method and its structure and dynamics were investigated using synchrotron radiation x-ray diffraction (XRD), neutron diffraction, and quasielastic neutron scattering (QENS). The as-deposited a-HH possesses local cage-like space that accommodates hydrogen molecules, giving a structure clearly distinct from amorphous ice (a-ice). Upon heating, hydrogen molecules are released from a-HH at around 60 K, accompanied by a rapid development of the hydrogen-bond network. At 120 K, the structure approaches that of a-ice. The QENS spectrum observed during the VD displays localized motions of hydrogen molecules confined within a space with a characteristic radius of ∼2.6 Å. This space dimension is consistent with the free volume of small cages in hydrogen hydrates. The relaxation time of the motion of H2 molecules in the space is ∼50 ps, which is about one order of magnitude longer than the residence time reported for H2 confined in crystalline HH (c-HH). Thus, it was found that the behavior of H2 molecules in a-HH differs significantly from that in c-HH.
- 23 October 2026
- Published by AIP Publishing in The Journal of Chemical Physics
- Vol. 165 (16)
X-ray and neutron scattering studies on vapor-deposited amorphous hydrogen hydrate
Clathrate hydrates are rare inclusion compounds capable of forming both crystalline and amorphous states, making them ideal materials for studying the effects of environmental factors such as symmetry and volume on the motions of guest molecules. In this study, amorphous hydrogen hydrate (a-HH) was formed at 7 K by using a low-temperature vapor deposition (VD) method and its structure and dynamics were investigated using synchrotron radiation x-ray diffraction (XRD), neutron diffraction, and quasielastic neutron scattering (QENS). The as-deposited a-HH possesses local cage-like space that accommodates hydrogen molecules, giving a structure clearly distinct from amorphous ice (a-ice). Upon heating, hydrogen molecules are released from a-HH at around 60 K, accompanied by a rapid development of the hydrogen-bond network. At 120 K, the structure approaches that of a-ice. The QENS spectrum observed during the VD displays localized motions of hydrogen molecules confined within a space with a characteristic radius of ∼2.6 Å. This space dimension is consistent with the free volume of small cages in hydrogen hydrates. The relaxation time of the motion of H2 molecules in the space is ∼50 ps, which is about one order of magnitude longer than the residence time reported for H2 confined in crystalline HH (c-HH). Thus, it was found that the behavior of H2 molecules in a-HH differs significantly from that in c-HH.
- 8 October 2026
- Published by Springer Nature in Analytical Sciences
- p. 1-5
A correlation-based model-free method for tracking structural changes in in situ X-ray diffraction datasets
In situ X-ray diffraction (XRD) measurements are widely used to investigate structural changes and often generate large XRD datasets. Although principal component analysis (PCA) and Rietveld refinement are effective tools for data analysis, they generally require additional physical interpretation or structural models, making the screening of large datasets challenging. To address this challenge, we propose a model-free method based on time-dependent correlation functions for directly tracking structural changes in large in situ XRD datasets without requiring crystallographic models or profile fitting. The effectiveness of the proposed method was demonstrated using in situ XRD datasets collected during the amorphization of zeolites over a temperature range from room temperature to 1000 °C. The proposed method successfully tracked dehydration and amorphization processes directly from in situ XRD datasets and showed good agreement with the trends observed in differential thermal analysis (DTA) and thermogravimetry (TG) measurements. These results demonstrate that the proposed method provides a practical tool for screening and tracking structural changes in large in situ XRD datasets. Graphical abstract
- 8 October 2026
- Published by Springer Nature in Analytical Sciences
- p. 1-5
A correlation-based model-free method for tracking structural changes in in situ X-ray diffraction datasets
In situ X-ray diffraction (XRD) measurements are widely used to investigate structural changes and often generate large XRD datasets. Although principal component analysis (PCA) and Rietveld refinement are effective tools for data analysis, they generally require additional physical interpretation or structural models, making the screening of large datasets challenging. To address this challenge, we propose a model-free method based on time-dependent correlation functions for directly tracking structural changes in large in situ XRD datasets without requiring crystallographic models or profile fitting. The effectiveness of the proposed method was demonstrated using in situ XRD datasets collected during the amorphization of zeolites over a temperature range from room temperature to 1000 °C. The proposed method successfully tracked dehydration and amorphization processes directly from in situ XRD datasets and showed good agreement with the trends observed in differential thermal analysis (DTA) and thermogravimetry (TG) measurements. These results demonstrate that the proposed method provides a practical tool for screening and tracking structural changes in large in situ XRD datasets. Graphical abstract
- Open Access
- 26 August 2026
- Published by Elsevier in SSRN Electronic Journal
Operando observation of anode structural changes in a commercial polymer lithium-ion cell via high-energy X-ray diffraction
Clarifying the structural evolution of graphite anodes under practical battery operating conditions remains a key challenge to improve the performance of lithium-ion batteries. This study discusses the structural changes occurring in the anode of a commercial polymer lithium-ion cell using high-energy synchrotron X-ray diffraction. One key advantage of this technique is the use of 115 keV X-rays as the incident beam, which enables the detection of diffracted X-rays from inside the working battery without the requirement for specially customized X-ray windows. Moreover, in combination with a two-dimensional detector, diffraction patterns were obtained with a time resolution on the order of seconds. In this study, applying different cycling rates, the structural change of the anode was found to progress continuously and to remain independent of the charging rate within the investigated range. However, the structural change of the anode during discharging proceeded through two phases with coexistence observed at relatively high discharge rates. This inhomogeneous structural change influences the output performance and capacity of the battery. The developed technique, which minimizes the influence of the outer casing, enables the direct and operando observation of reactions inside commercial cells, providing insight for the rational design of strategies to improve battery performance.
- 26 August 2026
- Published by Elsevier in SSRN Electronic Journal
Open AccessOperando observation of anode structural changes in a commercial polymer lithium-ion cell via high-energy X-ray diffraction
Clarifying the structural evolution of graphite anodes under practical battery operating conditions remains a key challenge to improve the performance of lithium-ion batteries. This study discusses the structural changes occurring in the anode of a commercial polymer lithium-ion cell using high-energy synchrotron X-ray diffraction. One key advantage of this technique is the use of 115 keV X-rays as the incident beam, which enables the detection of diffracted X-rays from inside the working battery without the requirement for specially customized X-ray windows. Moreover, in combination with a two-dimensional detector, diffraction patterns were obtained with a time resolution on the order of seconds. In this study, applying different cycling rates, the structural change of the anode was found to progress continuously and to remain independent of the charging rate within the investigated range. However, the structural change of the anode during discharging proceeded through two phases with coexistence observed at relatively high discharge rates. This inhomogeneous structural change influences the output performance and capacity of the battery. The developed technique, which minimizes the influence of the outer casing, enables the direct and operando observation of reactions inside commercial cells, providing insight for the rational design of strategies to improve battery performance.
- 29 July 2026
- Published by IOP Publishing in Japanese Journal of Applied Physics
- Vol. 65 (14) , 142001
Synthetic, structural, and spectroscopic studies on Cr 2 O 3 –Na 2 O–CaO–GeO 2 glass and glass ceramic NIR phosphors
Herein, Cr 2 O 3 –Na 2 O–CaO–GeO 2 glasses and glass ceramics were synthesized and characterized as broadband NIR phosphors. X-ray diffraction and transmission electron microscopy revealed that annealing at 700 °C–800 °C induced the formation of Ca 2 Ge 7 O 16 crystals within the glass matrix. Changes in the oxidation state of Cr ions were analyzed using UV–Vis–NIR diffuse reflectance spectroscopy and X-ray absorption spectroscopy. The as-made glass exhibited broadband 4 T 2 → 4 A 2 emission of Cr 3+ spanning 700–1300 nm. Upon annealing, crystallization caused a blue shift and the appearance of sharp 2 E → 4 A 2 emission of Cr 3+ (R-line), whereas higher temperatures led to a red shift and N-line emission associated with Cr 3+ –Cr 3+ interactions. The PL decay time increased with annealing temperature, reaching a maximum at 775 °C. The PL quantum yield peaked at 0.23 at 725 °C and decreased at higher temperatures due to optical absorption by Cr 4+ ions.
- 29 July 2026
- Published by IOP Publishing in Japanese Journal of Applied Physics
- Vol. 65 (14) , 142001
Synthetic, structural, and spectroscopic studies on Cr 2 O 3 –Na 2 O–CaO–GeO 2 glass and glass ceramic NIR phosphors
Herein, Cr 2 O 3 –Na 2 O–CaO–GeO 2 glasses and glass ceramics were synthesized and characterized as broadband NIR phosphors. X-ray diffraction and transmission electron microscopy revealed that annealing at 700 °C–800 °C induced the formation of Ca 2 Ge 7 O 16 crystals within the glass matrix. Changes in the oxidation state of Cr ions were analyzed using UV–Vis–NIR diffuse reflectance spectroscopy and X-ray absorption spectroscopy. The as-made glass exhibited broadband 4 T 2 → 4 A 2 emission of Cr 3+ spanning 700–1300 nm. Upon annealing, crystallization caused a blue shift and the appearance of sharp 2 E → 4 A 2 emission of Cr 3+ (R-line), whereas higher temperatures led to a red shift and N-line emission associated with Cr 3+ –Cr 3+ interactions. The PL decay time increased with annealing temperature, reaching a maximum at 775 °C. The PL quantum yield peaked at 0.23 at 725 °C and decreased at higher temperatures due to optical absorption by Cr 4+ ions.
- 16 March 2026
- Published by AIP Publishing in The Journal of Chemical Physics
- Vol. 164 (11)
Structural and dynamic studies on vapor-deposited amorphous methane hydrate
Methane hydrate has been studied extensively not only as a future energy resource but also due to interest in quantum and classical rotations of methane molecules. In this study, amorphous methane hydrate (a-MH) was formed at 7 K by a low temperature vapor deposition method. To investigate the local amorphous structure and the dynamics of guest methane molecules, x-ray and neutron diffraction, quasi-elastic neutron scattering, and adiabatic calorimetry experiments were performed for both as-deposited and annealed samples. After the deposition, a-MH has a disordered and distorted cage-like structure. Annealing at 120 K promotes local hydrogen-bond ordering while keeping the amorphous state, and the resulting, more well-defined cages align as in structure I hydrate. Crystallization (decomposition to methane gas and cubic ice) occurred at 165 K. In the as-deposited sample, the motions of the guest methane molecules are more hindered, and the rotational potential barrier is also higher. While after annealing, the motions are more like spherical rotation, as in structure I hydrate.
- 16 March 2026
- Published by AIP Publishing in The Journal of Chemical Physics
- Vol. 164 (11)
Structural and dynamic studies on vapor-deposited amorphous methane hydrate
Methane hydrate has been studied extensively not only as a future energy resource but also due to interest in quantum and classical rotations of methane molecules. In this study, amorphous methane hydrate (a-MH) was formed at 7 K by a low temperature vapor deposition method. To investigate the local amorphous structure and the dynamics of guest methane molecules, x-ray and neutron diffraction, quasi-elastic neutron scattering, and adiabatic calorimetry experiments were performed for both as-deposited and annealed samples. After the deposition, a-MH has a disordered and distorted cage-like structure. Annealing at 120 K promotes local hydrogen-bond ordering while keeping the amorphous state, and the resulting, more well-defined cages align as in structure I hydrate. Crystallization (decomposition to methane gas and cubic ice) occurred at 165 K. In the as-deposited sample, the motions of the guest methane molecules are more hindered, and the rotational potential barrier is also higher. While after annealing, the motions are more like spherical rotation, as in structure I hydrate.
- 9 February 2026
- Published by Wiley in Angewandte Chemie
- Vol. 138 (18)
Meltable Semiconductive Lead–Thiolate Coordination Polymers with Long Alkyl Chains
Meltable organic–inorganic hybrid semiconductors are attractive for their potential for melt‐based processing. Although meltable semiconducting metal halide perovskites have been extensively studied, meltable semiconducting coordination polymers (CPs) remain scarce, despite their excellent structural designability and the tunability of their optoelectronic properties. We report a new family of meltable semiconductive Pb(II) benzenethiolate CPs bearing long alkyl chains, formulated as [Pb(SPhOC 6 ) 2 ] n ( KGF‐34(C6) ; HSPhOC 6 = 4‐hexyloxybenzenethiol). For comparison, we also synthesized the classical analogue [Pb(SC 6 ) 2 ] n ( KGF‐59(C6) ; HSC 6 = 1‐hexanethiol). Single‐crystal X‐ray diffraction analyses revealed that both KGF‐34(C6) and KGF‐59(C6) adopt 2D architectures, albeit with distinct inorganic (–Pb–S–) n networks. A comprehensive characterization of the semiconducting properties, combined with first‐principles calculations, revealed that KGF‐34(C6) exhibits significantly higher photoconductivity, a narrower band gap, and a larger band dispersion than KGF‐59(C6) , attributable to differences in their inorganic (–Pb–S–) n network structures. Furthermore, both KGF‐34(C6) and KGF‐59(C6) exhibit multiple phase transitions, including melting and liquid crystalline formation, enabling the fabrication of optoelectronic devices via melt processing. Notably, this is the first report of meltable semiconducting CPs comprising benzenethiol‐derived ligands. These findings offer a rational design strategy for developing melt‐processable semiconductive materials based on metal–benzenethiolate CPs.
- 9 February 2026
- Published by Wiley in Angewandte Chemie
- Vol. 138 (18)
Meltable Semiconductive Lead–Thiolate Coordination Polymers with Long Alkyl Chains
Meltable organic–inorganic hybrid semiconductors are attractive for their potential for melt‐based processing. Although meltable semiconducting metal halide perovskites have been extensively studied, meltable semiconducting coordination polymers (CPs) remain scarce, despite their excellent structural designability and the tunability of their optoelectronic properties. We report a new family of meltable semiconductive Pb(II) benzenethiolate CPs bearing long alkyl chains, formulated as [Pb(SPhOC 6 ) 2 ] n ( KGF‐34(C6) ; HSPhOC 6 = 4‐hexyloxybenzenethiol). For comparison, we also synthesized the classical analogue [Pb(SC 6 ) 2 ] n ( KGF‐59(C6) ; HSC 6 = 1‐hexanethiol). Single‐crystal X‐ray diffraction analyses revealed that both KGF‐34(C6) and KGF‐59(C6) adopt 2D architectures, albeit with distinct inorganic (–Pb–S–) n networks. A comprehensive characterization of the semiconducting properties, combined with first‐principles calculations, revealed that KGF‐34(C6) exhibits significantly higher photoconductivity, a narrower band gap, and a larger band dispersion than KGF‐59(C6) , attributable to differences in their inorganic (–Pb–S–) n network structures. Furthermore, both KGF‐34(C6) and KGF‐59(C6) exhibit multiple phase transitions, including melting and liquid crystalline formation, enabling the fabrication of optoelectronic devices via melt processing. Notably, this is the first report of meltable semiconducting CPs comprising benzenethiol‐derived ligands. These findings offer a rational design strategy for developing melt‐processable semiconductive materials based on metal–benzenethiolate CPs.
- 9 February 2026
- Published by Wiley in Angewandte Chemie International Edition
- Vol. 65 (18) , e18379
Meltable Semiconductive Lead–Thiolate Coordination Polymers with Long Alkyl Chains
Meltable organic–inorganic hybrid semiconductors are attractive for their potential for melt‐based processing. Although meltable semiconducting metal halide perovskites have been extensively studied, meltable semiconducting coordination polymers (CPs) remain scarce, despite their excellent structural designability and the tunability of their optoelectronic properties. We report a new family of meltable semiconductive Pb(II) benzenethiolate CPs bearing long alkyl chains, formulated as [Pb(SPhOC 6 ) 2 ] n ( KGF‐34(C6) ; HSPhOC 6 = 4‐hexyloxybenzenethiol). For comparison, we also synthesized the classical analogue [Pb(SC 6 ) 2 ] n ( KGF‐59(C6) ; HSC 6 = 1‐hexanethiol). Single‐crystal X‐ray diffraction analyses revealed that both KGF‐34(C6) and KGF‐59(C6) adopt 2D architectures, albeit with distinct inorganic (–Pb–S–) n networks. A comprehensive characterization of the semiconducting properties, combined with first‐principles calculations, revealed that KGF‐34(C6) exhibits significantly higher photoconductivity, a narrower band gap, and a larger band dispersion than KGF‐59(C6) , attributable to differences in their inorganic (–Pb–S–) n network structures. Furthermore, both KGF‐34(C6) and KGF‐59(C6) exhibit multiple phase transitions, including melting and liquid crystalline formation, enabling the fabrication of optoelectronic devices via melt processing. Notably, this is the first report of meltable semiconducting CPs comprising benzenethiol‐derived ligands. These findings offer a rational design strategy for developing melt‐processable semiconductive materials based on metal–benzenethiolate CPs.
- 9 February 2026
- Published by Wiley in Angewandte Chemie International Edition
- Vol. 65 (18) , e18379
Meltable Semiconductive Lead–Thiolate Coordination Polymers with Long Alkyl Chains
Meltable organic–inorganic hybrid semiconductors are attractive for their potential for melt‐based processing. Although meltable semiconducting metal halide perovskites have been extensively studied, meltable semiconducting coordination polymers (CPs) remain scarce, despite their excellent structural designability and the tunability of their optoelectronic properties. We report a new family of meltable semiconductive Pb(II) benzenethiolate CPs bearing long alkyl chains, formulated as [Pb(SPhOC 6 ) 2 ] n ( KGF‐34(C6) ; HSPhOC 6 = 4‐hexyloxybenzenethiol). For comparison, we also synthesized the classical analogue [Pb(SC 6 ) 2 ] n ( KGF‐59(C6) ; HSC 6 = 1‐hexanethiol). Single‐crystal X‐ray diffraction analyses revealed that both KGF‐34(C6) and KGF‐59(C6) adopt 2D architectures, albeit with distinct inorganic (–Pb–S–) n networks. A comprehensive characterization of the semiconducting properties, combined with first‐principles calculations, revealed that KGF‐34(C6) exhibits significantly higher photoconductivity, a narrower band gap, and a larger band dispersion than KGF‐59(C6) , attributable to differences in their inorganic (–Pb–S–) n network structures. Furthermore, both KGF‐34(C6) and KGF‐59(C6) exhibit multiple phase transitions, including melting and liquid crystalline formation, enabling the fabrication of optoelectronic devices via melt processing. Notably, this is the first report of meltable semiconducting CPs comprising benzenethiol‐derived ligands. These findings offer a rational design strategy for developing melt‐processable semiconductive materials based on metal–benzenethiolate CPs.
- Top Cited PapersOpen Access
- 22 January 2026
- Published by International Union of Crystallography (IUCr) in Journal of Synchrotron Radiation
- Vol. 33 (2) , 516-522
High-throughput X-ray total scattering measurement system at BL04B2 of SPring-8
X-ray total scattering is widely used for analyzing pair distribution functions (PDFs) to elucidate the local structure of materials. For achieving high-throughput PDF analysis, a beamline monochromator and an experimental system were updated at BL04B2 of SPring-8. The system consists of a diffractometer and 2D area detectors, which cover a wide Q range of 0.2–27 Å −1 at a photon energy of 113 keV, with a temperature control capability between 100 and 1100 K. The typical measurement time is reduced to ∼10 min per sample, which is more than ten times faster than the conventional setup. This system enables efficient structural analysis of various types of materials such as liquids, glasses and nanocrystals while yielding abundant measurement data for use in materials science.
- 22 January 2026
- Published by International Union of Crystallography (IUCr) in Journal of Synchrotron Radiation
- Vol. 33 (2) , 516-522
Top Cited PapersOpen AccessHigh-throughput X-ray total scattering measurement system at BL04B2 of SPring-8
X-ray total scattering is widely used for analyzing pair distribution functions (PDFs) to elucidate the local structure of materials. For achieving high-throughput PDF analysis, a beamline monochromator and an experimental system were updated at BL04B2 of SPring-8. The system consists of a diffractometer and 2D area detectors, which cover a wide Q range of 0.2–27 Å −1 at a photon energy of 113 keV, with a temperature control capability between 100 and 1100 K. The typical measurement time is reduced to ∼10 min per sample, which is more than ten times faster than the conventional setup. This system enables efficient structural analysis of various types of materials such as liquids, glasses and nanocrystals while yielding abundant measurement data for use in materials science.
- 25 November 2025
- Published by Royal Society of Chemistry (RSC) in Chemical Communications
- Vol. 62 (3) , 855-859
Influence of Zn 2+ and S 2− on the formation of CsPbBr 3 nanocrystals in fluorophosphate glass
We validated the “phase separation–phase transition” mechanism of CsPbBr 3 perovskites in fluorophosphate glass and regulated the process with Zn 2+ and S 2− .
- 25 November 2025
- Published by Royal Society of Chemistry (RSC) in Chemical Communications
- Vol. 62 (3) , 855-859
Influence of Zn 2+ and S 2− on the formation of CsPbBr 3 nanocrystals in fluorophosphate glass
We validated the “phase separation–phase transition” mechanism of CsPbBr 3 perovskites in fluorophosphate glass and regulated the process with Zn 2+ and S 2− .
- Open Access
- 28 April 2025
- Published by Royal Society of Chemistry (RSC) in Materials Advances
- Vol. 6 (12) , 3863-3874
Unraveling the structural complexity of niobate units in aluminosilicate glasses and glass–ceramics
Evolution of the glass structure with niobium incorporation.
- 28 April 2025
- Published by Royal Society of Chemistry (RSC) in Materials Advances
- Vol. 6 (12) , 3863-3874
Open AccessUnraveling the structural complexity of niobate units in aluminosilicate glasses and glass–ceramics
Evolution of the glass structure with niobium incorporation.