Wook-Jin Chung
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Wook-Jin Chung has a total of 119 co-authors. Here are the top co-authors by number of shared publications:
- Grace Masbate Nisola
Myongji Univ, Environm Waste Recycle Inst EWRI, Dept Energy Sci & Technol DEST, Myongji Ro 116, Yongin 17058, Gyeonggi Do, South Korea
47 shared publications - Kris Niño Gomez Valdehuesa
Department of Energy Science and Technology (DEST), Energy and Environment Fusion Technology Center (E2FTC), Myongji University, Myongji-ro 116, Cheoin-gu, Yongin, 17058, Gyeonggi-do, Republic of Korea
22 shared publications - Kristine Rose M. Ramos
Myongji University
12 shared publications - Angelo Bautista Bañares
Department of Energy Science and Technology (DEST), Energy and Environment Fusion Technology Center (E2FTC), Myongji University, Myongji-ro 116, Cheoin-gu, Yongin, 17058, Gyeonggi-do, Republic of Korea
11 shared publications - Lee
Division of Bioscience and Bioinformatics, Myongji University, Myongji-ro 116, Cheoin-gu, Yongin, 17058, Gyeonggi-do, Republic of Korea.
11 shared publications Won-Keun Lee
Division of Bioscience and Bioinformatics, Myongji University, Myongji-ro 116, Cheoin-gu, Yongin City 17058, Gyeonggi Province, South Korea
10 shared publications
Latest Publications
- 11 March 2022
- Published by Elsevier in Chemosphere
- Vol. 298, 134301
Hydroxypicolinic acid tethered on magnetite core-silica shell (HPCA@SiO2@Fe3O4) as an effective and reusable adsorbent for practical Co(II) recovery
- 11 March 2022
- Published by Elsevier in Chemosphere
- Vol. 298, 134301
Hydroxypicolinic acid tethered on magnetite core-silica shell (HPCA@SiO2@Fe3O4) as an effective and reusable adsorbent for practical Co(II) recovery
- Open Access
- 17 February 2022
- Published by Elsevier in SSRN Electronic Journal
Hydroxypicolinic Acid Tethered on Magnetite Core-Silica Shell (Hpca@Sio2@Fe3o4) as an Effective and Reusable Adsorbent for Practical Co(Ii) Recovery
The soaring demand and future supply risk for cobalt (Co) necessitates more efficient adsorbents for its recycling from electronic wastes, as a cheaper and less hazardous option for its production. Herein, a magnetic adsorbent covalently tethered with 5-hydroxypicolinic acid (HPCA) as Co(II) ligand was developed. The magnetic component (Fe3O4) was protected with silica (SiO2), then silanized with chloroalkyl linker and subsequently functionalized with HPCA via SN2 nucleophilic substitution (HPCA@SiO2@Fe3O4). Results from FTIR, TGA, EA, and XPS confirm the successful adsorbent preparation with high HPCA loading of 2.62 mmol g-1. TEM-EDS reveal its imperfect spherical morphology with ligands well-distributed on its surface. HPCA@SiO2@Fe3O4 is hydrophilic, water-dispersible and magnetically retrievable, which is highly convenient for its recovery. The Co(II) capture on HPCA@SiO2@Fe3O4 involves monodentate coordination with carboxylate (COO-) and lone pair acceptance from pyridine (aromatic –N̈=) moiety of HPCA, with minor interaction from acidic silanols (Si-O-). The binding occurs at 2 HPCA: 1 Co(II) ratio, that follows the Sips isotherm model with competitive Qmax=92.35 mg g-1 and pseudo-second order kinetics (k2=0.0042 g mg-1 min-1). In a simulated LIB liquid waste, HPCA@SiO2@Fe3O4 preferentially captures Co(II) over Li(I) with α = 166 and Mn(II) with α = 55, which highlights the importance of HPCA for Co(II) recovery. Silica protection of Fe3O4 rendered the adsorbent chemically stable in acidic thiourea solution for its regeneration by preventing the deterioration of the magnetic component. Covalent functionalization averted ligand loss, which allowed HPCA@SiO2@Fe3O4 to deliver consistent and reversible adsorption/desorption performance. Overall results demonstrate the potential of HPCA@SiO2@Fe3O4 as a competitive and practical adsorbent for Co(II) recovery in liquid waste sources.
- 17 February 2022
- Published by Elsevier in SSRN Electronic Journal
Open AccessHydroxypicolinic Acid Tethered on Magnetite Core-Silica Shell (Hpca@Sio2@Fe3o4) as an Effective and Reusable Adsorbent for Practical Co(Ii) Recovery
The soaring demand and future supply risk for cobalt (Co) necessitates more efficient adsorbents for its recycling from electronic wastes, as a cheaper and less hazardous option for its production. Herein, a magnetic adsorbent covalently tethered with 5-hydroxypicolinic acid (HPCA) as Co(II) ligand was developed. The magnetic component (Fe3O4) was protected with silica (SiO2), then silanized with chloroalkyl linker and subsequently functionalized with HPCA via SN2 nucleophilic substitution (HPCA@SiO2@Fe3O4). Results from FTIR, TGA, EA, and XPS confirm the successful adsorbent preparation with high HPCA loading of 2.62 mmol g-1. TEM-EDS reveal its imperfect spherical morphology with ligands well-distributed on its surface. HPCA@SiO2@Fe3O4 is hydrophilic, water-dispersible and magnetically retrievable, which is highly convenient for its recovery. The Co(II) capture on HPCA@SiO2@Fe3O4 involves monodentate coordination with carboxylate (COO-) and lone pair acceptance from pyridine (aromatic –N̈=) moiety of HPCA, with minor interaction from acidic silanols (Si-O-). The binding occurs at 2 HPCA: 1 Co(II) ratio, that follows the Sips isotherm model with competitive Qmax=92.35 mg g-1 and pseudo-second order kinetics (k2=0.0042 g mg-1 min-1). In a simulated LIB liquid waste, HPCA@SiO2@Fe3O4 preferentially captures Co(II) over Li(I) with α = 166 and Mn(II) with α = 55, which highlights the importance of HPCA for Co(II) recovery. Silica protection of Fe3O4 rendered the adsorbent chemically stable in acidic thiourea solution for its regeneration by preventing the deterioration of the magnetic component. Covalent functionalization averted ligand loss, which allowed HPCA@SiO2@Fe3O4 to deliver consistent and reversible adsorption/desorption performance. Overall results demonstrate the potential of HPCA@SiO2@Fe3O4 as a competitive and practical adsorbent for Co(II) recovery in liquid waste sources.
- 1 February 2022
- Published by Elsevier in Chemosphere
- Vol. 288 (Pt 2) , 132501
Hyper-crosslinked tetraphenylborate as a regenerable sorbent for Cs+ sequestration in aqueous media through cation-π interactions
- 1 February 2022
- Published by Elsevier in Chemosphere
- Vol. 288 (Pt 2) , 132501
Hyper-crosslinked tetraphenylborate as a regenerable sorbent for Cs+ sequestration in aqueous media through cation-π interactions
- Open Access
- 27 October 2021
- Published by MDPI AG in Nanomaterials
- Vol. 11 (11) , 2867
Chemically Cross-Linked Graphene Oxide as a Selective Layer on Electrospun Polyvinyl Alcohol Nanofiber Membrane for Nanofiltration Application
Graphene oxide (GO) nanosheets were utilized as a selective layer on a highly porous polyvinyl alcohol (PVA) nanofiber support via a pressure-assisted self-assembly technique to synthesize composite nanofiltration membranes. The GO layer was rendered stable by cross-linking the nanosheets (GO-to-GO) and by linking them onto the support surface (GO-to-PVA) using glutaraldehyde (GA). The amounts of GO and GA deposited on the PVA substrate were varied to determine the optimum nanofiltration membrane both in terms of water flux and salt rejection performances. The successful GA cross-linking of GO interlayers and GO-PVA via acetalization was confirmed by FTIR and XPS analyses, which corroborated with other characterization results from contact angle and zeta potential measurements. Morphologies of the most effective membrane (CGOPVA-50) featured a defect-free GA cross-linked GO layer with a thickness of ~67 nm. The best solute rejections of the CGOPVA-50 membrane were 91.01% for Na2SO4 (20 mM), 98.12% for Eosin Y (10 mg/L), 76.92% for Methylene blue (10 mg/L), and 49.62% for NaCl (20 mM). These findings may provide one of the promising approaches in synthesizing mechanically stable GO-based thin-film composite membranes that are effective for solute separation via nanofiltration.
- 27 October 2021
- Published by MDPI AG in Nanomaterials
- Vol. 11 (11) , 2867
Open AccessChemically Cross-Linked Graphene Oxide as a Selective Layer on Electrospun Polyvinyl Alcohol Nanofiber Membrane for Nanofiltration Application
Graphene oxide (GO) nanosheets were utilized as a selective layer on a highly porous polyvinyl alcohol (PVA) nanofiber support via a pressure-assisted self-assembly technique to synthesize composite nanofiltration membranes. The GO layer was rendered stable by cross-linking the nanosheets (GO-to-GO) and by linking them onto the support surface (GO-to-PVA) using glutaraldehyde (GA). The amounts of GO and GA deposited on the PVA substrate were varied to determine the optimum nanofiltration membrane both in terms of water flux and salt rejection performances. The successful GA cross-linking of GO interlayers and GO-PVA via acetalization was confirmed by FTIR and XPS analyses, which corroborated with other characterization results from contact angle and zeta potential measurements. Morphologies of the most effective membrane (CGOPVA-50) featured a defect-free GA cross-linked GO layer with a thickness of ~67 nm. The best solute rejections of the CGOPVA-50 membrane were 91.01% for Na2SO4 (20 mM), 98.12% for Eosin Y (10 mg/L), 76.92% for Methylene blue (10 mg/L), and 49.62% for NaCl (20 mM). These findings may provide one of the promising approaches in synthesizing mechanically stable GO-based thin-film composite membranes that are effective for solute separation via nanofiltration.
- 3 July 2021
- Published by Springer Nature in Applied Microbiology and Biotechnology
- Vol. 105 (13) , 5309-5324
Understanding D-xylonic acid accumulation: a cornerstone for better metabolic engineering approaches
The xylose oxidative pathway (XOP) has been engineered in microorganisms for the production of a wide range of industrially relevant compounds. However, th
- 3 July 2021
- Published by Springer Nature in Applied Microbiology and Biotechnology
- Vol. 105 (13) , 5309-5324
Understanding D-xylonic acid accumulation: a cornerstone for better metabolic engineering approaches
The xylose oxidative pathway (XOP) has been engineered in microorganisms for the production of a wide range of industrially relevant compounds. However, th
- 9 February 2021
- Published by Taylor & Francis in Critical Reviews in Biotechnology
- Vol. 41 (5) , 649-668
Engineering of xylose metabolism inEscherichia colifor the production of valuable compounds
The lignocellulosic sugar d-xylose has recently gained prominence as an inexpensive alternative substrate for the production of value-added compounds using genetically modified organisms. Among the prokaryotes, Escherichia coli has become the de facto host for the development of engineered microbial cell factories. The favored status of E. coli resulted from a century of scientific explorations leading to a deep understanding of its systems. However, there are limited literature reviews that discuss engineered E. coli as a platform for the conversion of d-xylose to any target compounds. Additionally, available critical review articles tend to focus on products rather than the host itself. This review aims to provide relevant and current information about significant advances in the metabolic engineering of d-xylose metabolism in E. coli. This focusses on unconventional and synthetic d-xylose metabolic pathways as several review articles have already discussed the engineering of native d-xylose metabolism. This paper, in particular, is essential to those who are working on engineering of d-xylose metabolism using E. coli as the host.
- 9 February 2021
- Published by Taylor & Francis in Critical Reviews in Biotechnology
- Vol. 41 (5) , 649-668
Engineering of xylose metabolism inEscherichia colifor the production of valuable compounds
The lignocellulosic sugar d-xylose has recently gained prominence as an inexpensive alternative substrate for the production of value-added compounds using genetically modified organisms. Among the prokaryotes, Escherichia coli has become the de facto host for the development of engineered microbial cell factories. The favored status of E. coli resulted from a century of scientific explorations leading to a deep understanding of its systems. However, there are limited literature reviews that discuss engineered E. coli as a platform for the conversion of d-xylose to any target compounds. Additionally, available critical review articles tend to focus on products rather than the host itself. This review aims to provide relevant and current information about significant advances in the metabolic engineering of d-xylose metabolism in E. coli. This focusses on unconventional and synthetic d-xylose metabolic pathways as several review articles have already discussed the engineering of native d-xylose metabolism. This paper, in particular, is essential to those who are working on engineering of d-xylose metabolism using E. coli as the host.
- 1 February 2021
- Published by Springer Nature in Bioprocess and Biosystems Engineering
- Vol. 44 (6) , 1081-1091
Enhanced glycolic acid yield through xylose and cellobiose utilization by metabolically engineered Escherichia coli
Microbial biorefinery is a promising route toward sustainable production of glycolic acid (GA), a valuable raw material for various industries. However, inherent microbial GA production has limited substrate consumption using either d-xylose or d-glucose as carbon catabolite repression (CCR) averts their co-utilization. To bypass CCR, a GA-producing strain using d-xylose via Dahms pathway was engineered to allow cellobiose uptake. Unlike glucose, cellobiose was assimilated and intracellularly degraded without repressing d-xylose uptake. The final GA-producing E. coli strain (CLGA8) has an overexpressed cellobiose phosphorylase (cep94A) from Saccharophagus degradans 2–40 and an activated glyoxylate shunt pathway. Expression of cep94A improved GA production reaching the maximum theoretical yield (0.51 g GA g−1 xylose), whereas activation of glyoxylate shunt pathway enabled GA production from cellobiose, which further increased the GA titer (2.25 g GA L−1). To date, this is the highest reported GA yield from d-xylose through Dahms pathway in an engineered E. coli with cellobiose as co-substrate.
- 1 February 2021
- Published by Springer Nature in Bioprocess and Biosystems Engineering
- Vol. 44 (6) , 1081-1091
Enhanced glycolic acid yield through xylose and cellobiose utilization by metabolically engineered Escherichia coli
Microbial biorefinery is a promising route toward sustainable production of glycolic acid (GA), a valuable raw material for various industries. However, inherent microbial GA production has limited substrate consumption using either d-xylose or d-glucose as carbon catabolite repression (CCR) averts their co-utilization. To bypass CCR, a GA-producing strain using d-xylose via Dahms pathway was engineered to allow cellobiose uptake. Unlike glucose, cellobiose was assimilated and intracellularly degraded without repressing d-xylose uptake. The final GA-producing E. coli strain (CLGA8) has an overexpressed cellobiose phosphorylase (cep94A) from Saccharophagus degradans 2–40 and an activated glyoxylate shunt pathway. Expression of cep94A improved GA production reaching the maximum theoretical yield (0.51 g GA g−1 xylose), whereas activation of glyoxylate shunt pathway enabled GA production from cellobiose, which further increased the GA titer (2.25 g GA L−1). To date, this is the highest reported GA yield from d-xylose through Dahms pathway in an engineered E. coli with cellobiose as co-substrate.
- 1 January 2021
- Published by Desalination Publications in Desalination and Water Treatment
- Vol. 242, 128-143
Preparation and evaluation of epoxy resins for the selective removal of Cs+ in high-level liquid waste
- 1 January 2021
- Published by Desalination Publications in Desalination and Water Treatment
- Vol. 242, 128-143
Preparation and evaluation of epoxy resins for the selective removal of Cs+ in high-level liquid waste