Michele Vaiana
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Research Interests
Michele Vaiana has a total of 23 co-authors. Here are the top co-authors by number of shared publications:
- Giuseppe Bruno
STMicroelectronics, Catania, Italy
9 shared publications - Alfio Dario Grasso
University of Catania
4 shared publications - Yael Nemirovsky
Electrical and Computer Engineering Department, Technion—Israel Institute of Technology, Haifa 3200003, Israel
3 shared publications - Edoardo Bonizzoni
Department of Electrical, Computer and Biomedical Engineering, University of Pavia, 27100 Pavia, Italy
2 shared publications - Elisabetta Moisello
Department of Electrical, Computer and Biomedical Engineering, University of Pavia, 27100 Pavia, Italy
2 shared publications Igor Brouk
Electrical Engineering Department, Technion-Israel Institute of Technology, Haifa 32000, Israel
2 shared publications
Latest Publications
- 13 April 2022
- Published by Springer Nature
- p. 543-561
Environmental Sensors
- 1 July 2021
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Circuits and Systems I: Regular Papers
- Vol. 69 (1) , 75-87
A MEMS-CMOS Microsystem for Contact-Less Temperature Measurements
This paper presents a microsystem suitable for contact-less human body temperature measurements, as well as for presence, motion and proximity detection. It consists of a 130-nm CMOS-SOI MEMS (Micro-Electro Mechanical System) thermal sensor, referred to as ``TMOS'', and its 130-nm CMOS interface circuit. The TMOS, based on a micromachined transistor, being an active device, features advantages in terms of internal gain: with optimal biasing, indeed, the TMOS achieves 274-μV/°C input-referred sensitivity at 3-cm distance and 50.33° field-of-view (FOV), outperforming thermopile detectors. The sensor and the interface circuit, featuring a chopper-stabilized-based analog readout with a 12-bit SAR ADC (Successive Approximation Register Analog-to-Digital Converter), were mounted in the same package and extensively measured: the microsystem achieves repeatability and ±0.17°C precision, thus satisfying the requirements for contact-less human body temperature measurements; furthermore, its performance as presence, motion and proximity detector was also verified.
- 1 July 2021
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Circuits and Systems I: Regular Papers
- Vol. 69 (1) , 75-87
A MEMS-CMOS Microsystem for Contact-Less Temperature Measurements
This paper presents a microsystem suitable for contact-less human body temperature measurements, as well as for presence, motion and proximity detection. It consists of a 130-nm CMOS-SOI MEMS (Micro-Electro Mechanical System) thermal sensor, referred to as ``TMOS'', and its 130-nm CMOS interface circuit. The TMOS, based on a micromachined transistor, being an active device, features advantages in terms of internal gain: with optimal biasing, indeed, the TMOS achieves 274-μV/°C input-referred sensitivity at 3-cm distance and 50.33° field-of-view (FOV), outperforming thermopile detectors. The sensor and the interface circuit, featuring a chopper-stabilized-based analog readout with a 12-bit SAR ADC (Successive Approximation Register Analog-to-Digital Converter), were mounted in the same package and extensively measured: the microsystem achieves repeatability and ±0.17°C precision, thus satisfying the requirements for contact-less human body temperature measurements; furthermore, its performance as presence, motion and proximity detector was also verified.
- Open Access
A Time-Based Electronic Front-End for a Capacitive Particle Matter Detector
This paper introduces the electronic interface for a capacitive airborne particle matter detector. The proposed circuit relies on two matched ring oscillators and a mixer to detect the frequency difference induced by the deposition of a particle onto an interdigitated capacitor, which constitutes the load of one of the oscillators. The output of the mixer is digitized through a simple counter. In order to compensate the oscillation frequency offset of the two ring oscillators due to process and mismatch variations, a capacitive trimming circuit has been implemented. The sensor is connected to host through an I2C interface for communication and configuration. The sensor has been implemented using a standard 130-nm CMOS technology by STMicroelectronics and occupies 0.12-mm2 die area. Experimental measurements using talcum powder show a sensitivity of 60 kHz/fF and a 3σ resolution equal to 165 aF.
Open AccessA Time-Based Electronic Front-End for a Capacitive Particle Matter Detector
This paper introduces the electronic interface for a capacitive airborne particle matter detector. The proposed circuit relies on two matched ring oscillators and a mixer to detect the frequency difference induced by the deposition of a particle onto an interdigitated capacitor, which constitutes the load of one of the oscillators. The output of the mixer is digitized through a simple counter. In order to compensate the oscillation frequency offset of the two ring oscillators due to process and mismatch variations, a capacitive trimming circuit has been implemented. The sensor is connected to host through an I2C interface for communication and configuration. The sensor has been implemented using a standard 130-nm CMOS technology by STMicroelectronics and occupies 0.12-mm2 die area. Experimental measurements using talcum powder show a sensitivity of 60 kHz/fF and a 3σ resolution equal to 165 aF.
- Open Access
- 14 November 2020
- Published by MDPI AG in Engineering Proceedings
- Vol. 2 (1) , 30
Wafer-Level Packaged CMOS-SOI-MEMS Thermal Sensor at Wide Pressure Range for IoT Applications
Wafer-level processed and wafer-level packaged low-cost microelectromechanical system (MEMS) thermal sensors are required for a wide range of Internet of Things (IoT) and wearables applications. Recently, a new generation of uncooled thermal sensors based on CMOS-SOI-MEMS technology has emerged, with higher performance compared to commercial thermal sensors (bolometers, thermopiles, and pyroelectric sensors). The technology is implemented in commercial CMOS FABs and is, therefore, based on mature technology and implemented at a low cost. When packaged in a high vacuum, the sensors are dubbed TMOS and are applied for uncooled IR radiation. At atmospheric pressure, the sensors may function as gas sensors, dubbed GMOS. This paper focuses on the study of the thermal performance of wafer-level processed and packaged TMOS and GMOS sensors, where the pressure varies between high vacuum (0.01 Pa) and atmospheric pressure. The present study is based on analytical thermal modeling for gaining physical insight, 3D simulation is performed by ANSYS software, and finally, the measurements of the packaged devices are compared with the modeling and simulations.
- 14 November 2020
- Published by MDPI AG in Engineering Proceedings
- Vol. 2 (1) , 30
Open AccessWafer-Level Packaged CMOS-SOI-MEMS Thermal Sensor at Wide Pressure Range for IoT Applications
Wafer-level processed and wafer-level packaged low-cost microelectromechanical system (MEMS) thermal sensors are required for a wide range of Internet of Things (IoT) and wearables applications. Recently, a new generation of uncooled thermal sensors based on CMOS-SOI-MEMS technology has emerged, with higher performance compared to commercial thermal sensors (bolometers, thermopiles, and pyroelectric sensors). The technology is implemented in commercial CMOS FABs and is, therefore, based on mature technology and implemented at a low cost. When packaged in a high vacuum, the sensors are dubbed TMOS and are applied for uncooled IR radiation. At atmospheric pressure, the sensors may function as gas sensors, dubbed GMOS. This paper focuses on the study of the thermal performance of wafer-level processed and packaged TMOS and GMOS sensors, where the pressure varies between high vacuum (0.01 Pa) and atmospheric pressure. The present study is based on analytical thermal modeling for gaining physical insight, 3D simulation is performed by ANSYS software, and finally, the measurements of the packaged devices are compared with the modeling and simulations.
- 7 September 2020
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Sensors Journal
- Vol. 21 (3) , 3660-3668
Non-Imaging Digital CMOS-SOI-MEMS Uncooled Passive Infra-Red Sensing Systems
This paper presents a novel non-imaging digital passive Infra-Red (PIR) sensing system using a CMOS-SOIMEMS transistor as the thermal sensor, which replaces the traditional pyroelectric sensors and outperforms thermopiles. The mosaic sensors, which are manufactured by nano-fabrication methods in standard FABs, exhibit enhanced performance and robust manufacturing on wafer level processing and vacuum packaging. Mirror optics instead of Fresnel plastic lenses provides enhanced performance at low-cost. The essential aspects of the design of the mirrors for curtain sensors and presence sensors are presented. The overall measured performance for detecting human targets at extended ranges and hot spots detection are reported. The overall performance of the sensing systems indicate why they are most suitable for consumer electronics, including smart homes, wearables, Internet of Things (IoT) and mobile applications.
- 7 September 2020
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Sensors Journal
- Vol. 21 (3) , 3660-3668
Non-Imaging Digital CMOS-SOI-MEMS Uncooled Passive Infra-Red Sensing Systems
This paper presents a novel non-imaging digital passive Infra-Red (PIR) sensing system using a CMOS-SOIMEMS transistor as the thermal sensor, which replaces the traditional pyroelectric sensors and outperforms thermopiles. The mosaic sensors, which are manufactured by nano-fabrication methods in standard FABs, exhibit enhanced performance and robust manufacturing on wafer level processing and vacuum packaging. Mirror optics instead of Fresnel plastic lenses provides enhanced performance at low-cost. The essential aspects of the design of the mirrors for curtain sensors and presence sensors are presented. The overall measured performance for detecting human targets at extended ranges and hot spots detection are reported. The overall performance of the sensing systems indicate why they are most suitable for consumer electronics, including smart homes, wearables, Internet of Things (IoT) and mobile applications.
- Open Access
- 20 August 2020
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Access
- Vol. 8, 153969-153980
Sub-Femto-Farad Resolution Electronic Interfaces for Integrated Capacitive Sensors: A Review
Capacitance detection is a universal transduction mechanism used in a wide variety of sensors and applications. It requires an electronic front-end converting the capacitance variation into another more convenient physical variable, ultimately determining the performance of the whole sensor. In this paper we present a comprehensive review of the different signal conditioning front-end topologies targeted in particular at sub-femtofarad resolution. Main design equations and analysis of the limits due to noise are reported in order to provide the designer with guidelines for choosing the most suitable topology according to the main design specifications, namely energy consumption, area occupation, measuring time and resolution. A data-driven comparison of the different solutions in literature is also carried out revealing that resolution, measuring time, area occupation and energy/conversion lower than 100 aF, 1 ms 0.1 mm2, and 100 pJ/conv. can be obtained by capacitance to digital topologies, which therefore allow to get the best compromise among all design specifications.
- 20 August 2020
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Access
- Vol. 8, 153969-153980
Open AccessSub-Femto-Farad Resolution Electronic Interfaces for Integrated Capacitive Sensors: A Review
Capacitance detection is a universal transduction mechanism used in a wide variety of sensors and applications. It requires an electronic front-end converting the capacitance variation into another more convenient physical variable, ultimately determining the performance of the whole sensor. In this paper we present a comprehensive review of the different signal conditioning front-end topologies targeted in particular at sub-femtofarad resolution. Main design equations and analysis of the limits due to noise are reported in order to provide the designer with guidelines for choosing the most suitable topology according to the main design specifications, namely energy consumption, area occupation, measuring time and resolution. A data-driven comparison of the different solutions in literature is also carried out revealing that resolution, measuring time, area occupation and energy/conversion lower than 100 aF, 1 ms 0.1 mm2, and 100 pJ/conv. can be obtained by capacitance to digital topologies, which therefore allow to get the best compromise among all design specifications.
- 1 June 2020
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1-4
Sub-fF Resolution Capacitive Amplifier For Particulate Matter Airborne Detection
In this paper the preliminary design of the electronic interface for a particulate matter detector is reported. The topology relies on a simple capacitance to voltage converter capable of detecting capacitance variations in the attoFarad range. Theoretical analysis of the signal to noise ratio related to the geometry of the sensing channel is carried out. Simulation results supporting the validity of the theoretical analysis are reported and show a potential minimum detectable capacitance variation as low as 36 aF for each sensing electrode with a current dissipation of $20\ \mu \mathrm{A}$ .- 1 June 2020
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1-4
Sub-fF Resolution Capacitive Amplifier For Particulate Matter Airborne Detection
In this paper the preliminary design of the electronic interface for a particulate matter detector is reported. The topology relies on a simple capacitance to voltage converter capable of detecting capacitance variations in the attoFarad range. Theoretical analysis of the signal to noise ratio related to the geometry of the sensing channel is carried out. Simulation results supporting the validity of the theoretical analysis are reported and show a potential minimum detectable capacitance variation as low as 36 aF for each sensing electrode with a current dissipation of $20\ \mu \mathrm{A}$ .- 6 May 2020
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Instrumentation and Measurement
- Vol. PP (00189456) , 1
A Compact Temperature Sensor with a Resolution FoM of 1.82 pJ·K2
In this paper a compact ultra-low power smart temperature sensor realized in 130-nm standard CMOS technology, provided by STMicroelectronics, is presented. The sensor is designed with the aim of measuring local temperature variations in the range of -20 °C to 85 °C in temperature drift compensation applications. It relies on a simple circuit topology that employs two current-controlled oscillators, a divider and a 15-bit counter, which allows temperature-to-digital conversion. Experimental results show an inaccuracy of ±0.6 °C (3σ) and a resolution of 0.012 °C with a power consumption as low as 6 μW at 1.3-V power supply with a total die area of only 0.00916 mm2.
- 6 May 2020
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Instrumentation and Measurement
- Vol. PP (00189456) , 1
A Compact Temperature Sensor with a Resolution FoM of 1.82 pJ·K2
In this paper a compact ultra-low power smart temperature sensor realized in 130-nm standard CMOS technology, provided by STMicroelectronics, is presented. The sensor is designed with the aim of measuring local temperature variations in the range of -20 °C to 85 °C in temperature drift compensation applications. It relies on a simple circuit topology that employs two current-controlled oscillators, a divider and a 15-bit counter, which allows temperature-to-digital conversion. Experimental results show an inaccuracy of ±0.6 °C (3σ) and a resolution of 0.012 °C with a power consumption as low as 6 μW at 1.3-V power supply with a total die area of only 0.00916 mm2.
- Open Access
An Integrated Thermopile-Based Sensor with a Chopper-Stabilized Interface Circuit for Presence Detection
This paper presents a sensor-readout circuit system suitable for presence detection. The sensor consists of a miniaturized polysilicon thermopile, realized employing MEMS micromachining by STMicroelectronics, featuring a responsivity value equal to 180 V/W, with 13 ms response time. The readout circuit is implemented in a standard 130-nm CMOS process. As the sensor output signal behaves substantially as a DC, the interface circuit employs the chopper technique in order to minimize offset and noise contributions at low frequency, achieving a measured input referred offset standard deviation equal to 1.36 V. Measurements show that the presented system allows successfully detecting the presence of a person in a room standing at 5.5 m from the sensor. Furthermore, the correct operation of the system with moving targets, considering people either walking or running, was also demonstrated.Open AccessAn Integrated Thermopile-Based Sensor with a Chopper-Stabilized Interface Circuit for Presence Detection
This paper presents a sensor-readout circuit system suitable for presence detection. The sensor consists of a miniaturized polysilicon thermopile, realized employing MEMS micromachining by STMicroelectronics, featuring a responsivity value equal to 180 V/W, with 13 ms response time. The readout circuit is implemented in a standard 130-nm CMOS process. As the sensor output signal behaves substantially as a DC, the interface circuit employs the chopper technique in order to minimize offset and noise contributions at low frequency, achieving a measured input referred offset standard deviation equal to 1.36 V. Measurements show that the presented system allows successfully detecting the presence of a person in a room standing at 5.5 m from the sensor. Furthermore, the correct operation of the system with moving targets, considering people either walking or running, was also demonstrated.