Gert-Jan Gordebeke
Research Subjects
Gert-Jan Gordebeke has a total of 32 co-authors. Here are the top co-authors by number of shared publications:
- Sam Lemey
Ghent University - IMEC
5 shared publications - Eli De Poorter
Ghent University
3 shared publications - Hendrik Rogier
Ghent University
3 shared publications - Adnan Shahid
Department of Information Technology, IDLab, Ghent University - imec, Ghent, Belgium
2 shared publications Michiel Boes
Pozyx, Ghent, Belgium
2 shared publications- Olivier Caytan
Ghent University
2 shared publications
Latest Publications
- Open Access
- 16 July 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Access
- Vol. 13, 125016-125028
Metal-Stamped and IR-UWB-Optimized Air-Filled Cavity-Backed Antenna Array for Cost-Effective Single-Anchor 3D Localization
A cost-effective, yet high-performance, time-domain-optimized air-filled cavity-backed metal-stamped slot antenna is presented for next-generation multi-channel, multi-antenna IR-UWB applications. Equipping a quarter-mode metal-stamped cavity with a novel feeding mechanism yields a compact 0.43 $\lambda _{{0}}$ 0.43 $\lambda _{{0}}$ antenna that is compatible with standard low-cost manufacturing processes and that has a fractional bandwidth of 34.4%, covering UWB channels 5, 6, 8 and 9. The antenna is optimized in the frequency and time domains for IR-UWB applications. It is robust against variations in material properties and manufacturing inaccuracies in the metal stamping process. Furthermore, it retains its performance when exploited in a three-element V-shaped antenna array for single-anchor distance and 2D angle-of-arrival estimation. Measurements demonstrate excellent estimation performance in both free-space conditions and challenging real-life deployment scenarios. Specifically, 97% of all distance estimation errors are below 2cm, with a mean absolute error (MAE) of 7.1 mm. In terms of angle estimation, 91% of all errors are below $10^{\scriptscriptstyle \circ }$ , with an MAE of $5.0^{\scriptscriptstyle \circ }$ . These results highlight the antenna’s excellent IR-UWB and isolation performance, enabling single-anchor 3D localization for Industry 4.0 and Healthcare 4.0 applications.
- 16 July 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Access
- Vol. 13, 125016-125028
Open AccessMetal-Stamped and IR-UWB-Optimized Air-Filled Cavity-Backed Antenna Array for Cost-Effective Single-Anchor 3D Localization
A cost-effective, yet high-performance, time-domain-optimized air-filled cavity-backed metal-stamped slot antenna is presented for next-generation multi-channel, multi-antenna IR-UWB applications. Equipping a quarter-mode metal-stamped cavity with a novel feeding mechanism yields a compact 0.43 $\lambda _{{0}}$ 0.43 $\lambda _{{0}}$ antenna that is compatible with standard low-cost manufacturing processes and that has a fractional bandwidth of 34.4%, covering UWB channels 5, 6, 8 and 9. The antenna is optimized in the frequency and time domains for IR-UWB applications. It is robust against variations in material properties and manufacturing inaccuracies in the metal stamping process. Furthermore, it retains its performance when exploited in a three-element V-shaped antenna array for single-anchor distance and 2D angle-of-arrival estimation. Measurements demonstrate excellent estimation performance in both free-space conditions and challenging real-life deployment scenarios. Specifically, 97% of all distance estimation errors are below 2cm, with a mean absolute error (MAE) of 7.1 mm. In terms of angle estimation, 91% of all errors are below $10^{\scriptscriptstyle \circ }$ , with an MAE of $5.0^{\scriptscriptstyle \circ }$ . These results highlight the antenna’s excellent IR-UWB and isolation performance, enabling single-anchor 3D localization for Industry 4.0 and Healthcare 4.0 applications.
- Top Cited Papers
- 30 October 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Communications Surveys & Tutorials
- Vol. 27 (4) , 2283-2324
A Comprehensive Overview on UWB Radar: Applications, Standards, Signal Processing Techniques, Datasets, Radio Chips, Trends and Future Research Directions
Due to their large bandwidth, relatively low cost, and robust performance, uwb radio chips can be used for a wide variety of applications, including localization, communication, and radar. This article offers an exhaustive survey of recent progress in uwb radar technology. The goal of this survey is to provide a comprehensive view of the technical fundamentals and emerging trends in uwb radar. Our analysis is categorized into multiple parts. Firstly, we explore the fundamental concepts of uwb radar technology from a technology and standardization point of view. Secondly, we examine the most relevant UWB applications and use cases, such as device-free localization, activity recognition, presence detection, and vital sign monitoring, discussing each time the bandwidth requirements, processing techniques, algorithms, latest developments, relevant example papers, and trends. Next, we steer readers toward relevant datasets and available radio chipsets. Finally, we discuss ongoing challenges and potential future research avenues. As such, this overview paper is designed to be a cornerstone reference for researchers charting the course of uwb radar technology over the last decade.
- 30 October 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Communications Surveys & Tutorials
- Vol. 27 (4) , 2283-2324
Top Cited PapersA Comprehensive Overview on UWB Radar: Applications, Standards, Signal Processing Techniques, Datasets, Radio Chips, Trends and Future Research Directions
Due to their large bandwidth, relatively low cost, and robust performance, uwb radio chips can be used for a wide variety of applications, including localization, communication, and radar. This article offers an exhaustive survey of recent progress in uwb radar technology. The goal of this survey is to provide a comprehensive view of the technical fundamentals and emerging trends in uwb radar. Our analysis is categorized into multiple parts. Firstly, we explore the fundamental concepts of uwb radar technology from a technology and standardization point of view. Secondly, we examine the most relevant UWB applications and use cases, such as device-free localization, activity recognition, presence detection, and vital sign monitoring, discussing each time the bandwidth requirements, processing techniques, algorithms, latest developments, relevant example papers, and trends. Next, we steer readers toward relevant datasets and available radio chipsets. Finally, we discuss ongoing challenges and potential future research avenues. As such, this overview paper is designed to be a cornerstone reference for researchers charting the course of uwb radar technology over the last decade.
- 7 September 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Sensors Journal
- Vol. 24 (5) , 5561-5577
Time-Domain-Optimized Antenna Array for High-Precision IR-UWB Localization in Harsh Urban Shipping Environments
Urban freight distribution via inland waterways is an important way to boost the quality of life in major urban areas with dense water networks. Cost-effective autonomous pallet shuttle barges (PSBs) are key to accelerate the shift from road-based transport to inland waterways. Yet, the urban settings impede reliable centimeter-level localization at critical waterway sections. In this article, we propose a time-domain-optimized antenna array to provide high-precision 3D localization in these complex environments with minimal shore-side infrastructure by exploiting impulse-radio ultra-wideband (IR-UWB) technology. To enable joint distance and 2D angle-of-arrival (AoA) estimation, we present a novel IR-UWB antenna element that covers channels 5 and 7 of the IEEE 802.15.4z standard, serving as a building block for scalable multi-antenna systems. By leveraging the air-filled substrate-integrated-waveguide technology and adopting a multi-objective system-level optimization strategy, excellent performance is reconciled with a compact footprint and cost-effective fabrication. The 3D positioning accuracy of a 2 × 2 array is evaluated in stand-alone conditions and when installed on a metal plate mimicking a PSB’s metal hull, showing that all distance errors and 97 % of angular errors remain below 2 cm and 5°, respectively. Finally, three anchor nodes, each consisting of a 1 × 4 array connected to a Pozyx hardware platform, are installed on a vessel navigating in a narrow canal below a bridge in Ghent. With only one shore-side UWB beacon node deployed, 96 % of AoA estimation errors remain below 10°, while the distance error remains below 10 cm, proving good installed performance in harsh urban shipping environments.
- 7 September 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Sensors Journal
- Vol. 24 (5) , 5561-5577
Time-Domain-Optimized Antenna Array for High-Precision IR-UWB Localization in Harsh Urban Shipping Environments
Urban freight distribution via inland waterways is an important way to boost the quality of life in major urban areas with dense water networks. Cost-effective autonomous pallet shuttle barges (PSBs) are key to accelerate the shift from road-based transport to inland waterways. Yet, the urban settings impede reliable centimeter-level localization at critical waterway sections. In this article, we propose a time-domain-optimized antenna array to provide high-precision 3D localization in these complex environments with minimal shore-side infrastructure by exploiting impulse-radio ultra-wideband (IR-UWB) technology. To enable joint distance and 2D angle-of-arrival (AoA) estimation, we present a novel IR-UWB antenna element that covers channels 5 and 7 of the IEEE 802.15.4z standard, serving as a building block for scalable multi-antenna systems. By leveraging the air-filled substrate-integrated-waveguide technology and adopting a multi-objective system-level optimization strategy, excellent performance is reconciled with a compact footprint and cost-effective fabrication. The 3D positioning accuracy of a 2 × 2 array is evaluated in stand-alone conditions and when installed on a metal plate mimicking a PSB’s metal hull, showing that all distance errors and 97 % of angular errors remain below 2 cm and 5°, respectively. Finally, three anchor nodes, each consisting of a 1 × 4 array connected to a Pozyx hardware platform, are installed on a vessel navigating in a narrow canal below a bridge in Ghent. With only one shore-side UWB beacon node deployed, 96 % of AoA estimation errors remain below 10°, while the distance error remains below 10 cm, proving good installed performance in harsh urban shipping environments.
- 13 April 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Communications Letters
- Vol. 26 (6) , 1273-1277
Machine Learning-Based Angle of Arrival Estimation for Ultra-Wide Band Radios
This letter analyzes the feasibility of deep convolutional neural networks (DCNN) for accurate ultra-wideband (UWB) angle of arrival estimation that is robust against hardware imperfections. To this end, a uniform linear array with four antenna elements is leveraged and a DCNN approach is proposed and compared with traditional approaches, such as MUSIC and phase difference of arrival estimators, for different environments, number of available channel impulse responses, and polarization mismatches, in terms of absolute value of error and computational complexity. The proposed approach outperforms the traditional approaches up to 80° error reduction at a computational complexity increase of only 10% compared to MUSIC.
- 13 April 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Communications Letters
- Vol. 26 (6) , 1273-1277
Machine Learning-Based Angle of Arrival Estimation for Ultra-Wide Band Radios
This letter analyzes the feasibility of deep convolutional neural networks (DCNN) for accurate ultra-wideband (UWB) angle of arrival estimation that is robust against hardware imperfections. To this end, a uniform linear array with four antenna elements is leveraged and a DCNN approach is proposed and compared with traditional approaches, such as MUSIC and phase difference of arrival estimators, for different environments, number of available channel impulse responses, and polarization mismatches, in terms of absolute value of error and computational complexity. The proposed approach outperforms the traditional approaches up to 80° error reduction at a computational complexity increase of only 10% compared to MUSIC.
- 12 October 2021
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Journal of Solid-State Circuits
- Vol. 56 (12) , 3799-3810
An IR-UWB IEEE 802.15.4z Compatible Coherent Asynchronous Polar Transmitter in 28-nm CMOS
A low-power IEEE 802.15.4z high-rate PHY (HRP) compatible coherent transmitter is described. The proposed transmitter uses a digital polar architecture with fixed amplitude steps in the power amplifier and asynchronous time-discrete pulse shaping. The pulse-shaping unit consists of a finite-impulse response (FIR) filter using current-starved inverter-based delay taps that can be calibrated on-chip. An injection-locked ring oscillator (ILRO)-based frequency synthesis enables wideband operation from 3- to 10-GHz frequency bands. The ILRO also allows for duty-cycled coherent mode operation with 2–4-ns phase locking time and binary phase modulation is applied directly on the oscillator. The on-chip digital front end enables duty cycling (DC) of analog front-end modules with a granularity of 2 ns. Implemented in 28-nm CMOS process, this chip is measured to consume 4.9-mW power in nominal mode with IEEE 802.15.4z high pulse repetition frequency (HPRF) compatible data rate of 6.81 Mb/s compliant with major spectrum mask regulations for channels 5 and 9. With DC of the oscillator enabled in the energy-efficient mode, a power consumption of $430~\mu \text{W}$ is achieved for packets compatible with legacy pulse-position-modulated IEEE 802.15.4a standard with a data rate of 27.2 Mb/s.
- 12 October 2021
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Journal of Solid-State Circuits
- Vol. 56 (12) , 3799-3810
An IR-UWB IEEE 802.15.4z Compatible Coherent Asynchronous Polar Transmitter in 28-nm CMOS
A low-power IEEE 802.15.4z high-rate PHY (HRP) compatible coherent transmitter is described. The proposed transmitter uses a digital polar architecture with fixed amplitude steps in the power amplifier and asynchronous time-discrete pulse shaping. The pulse-shaping unit consists of a finite-impulse response (FIR) filter using current-starved inverter-based delay taps that can be calibrated on-chip. An injection-locked ring oscillator (ILRO)-based frequency synthesis enables wideband operation from 3- to 10-GHz frequency bands. The ILRO also allows for duty-cycled coherent mode operation with 2–4-ns phase locking time and binary phase modulation is applied directly on the oscillator. The on-chip digital front end enables duty cycling (DC) of analog front-end modules with a granularity of 2 ns. Implemented in 28-nm CMOS process, this chip is measured to consume 4.9-mW power in nominal mode with IEEE 802.15.4z high pulse repetition frequency (HPRF) compatible data rate of 6.81 Mb/s compliant with major spectrum mask regulations for channels 5 and 9. With DC of the oscillator enabled in the energy-efficient mode, a power consumption of $430~\mu \text{W}$ is achieved for packets compatible with legacy pulse-position-modulated IEEE 802.15.4a standard with a data rate of 27.2 Mb/s.
- 1 July 2020
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Microwave Theory and Techniques
- Vol. 68 (7) , 2485-2494
Uncertainty Quantification of Waveguide Dispersion Using Sparse Grid Stochastic Testing
To quantify waveguide dispersion uncertainty, we propose a stochastic analysis technique based on the polynomial chaos method, where Smolyak sparse grids are used as sample spaces for the recently developed nonintrusive stochastic testing (ST) technique. This strategy allows for a smaller set of candidate collocation nodes in the ST algorithm compared with the computationally expensive tensor grid approach. The method is tailored to the analysis of waveguide structures with a statistically spatially varying dielectric-property profile, which is then captured by a discrete set of uncorrelated random variables by means of Karhunen-Loève transforms. In this way, the propagation properties of realistic stochastic waveguides can be predicted, which is of major importance in the electronic design process. The presented method, which is constructed around a second-order full-wave deterministic finite element solver, is illustrated through the uncertainty quantification of two waveguide dispersion problems and is validated using commercial electromagnetic field solvers and the Monte Carlo method.
- 1 July 2020
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Microwave Theory and Techniques
- Vol. 68 (7) , 2485-2494
Uncertainty Quantification of Waveguide Dispersion Using Sparse Grid Stochastic Testing
To quantify waveguide dispersion uncertainty, we propose a stochastic analysis technique based on the polynomial chaos method, where Smolyak sparse grids are used as sample spaces for the recently developed nonintrusive stochastic testing (ST) technique. This strategy allows for a smaller set of candidate collocation nodes in the ST algorithm compared with the computationally expensive tensor grid approach. The method is tailored to the analysis of waveguide structures with a statistically spatially varying dielectric-property profile, which is then captured by a discrete set of uncorrelated random variables by means of Karhunen-Loève transforms. In this way, the propagation properties of realistic stochastic waveguides can be predicted, which is of major importance in the electronic design process. The presented method, which is constructed around a second-order full-wave deterministic finite element solver, is illustrated through the uncertainty quantification of two waveguide dispersion problems and is validated using commercial electromagnetic field solvers and the Monte Carlo method.