Tatyana Shpyrko
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Tatyana Shpyrko has a total of 26 co-authors. Here are the top co-authors by number of shared publications:
- Galina Krusir
University of Applied Sciences and Arts Northwestern Switzerland
3 shared publications - Olga Sagdeeva
OdessaNationalAcad Food Technol, Dept Ecol & Environm Technol, 112 Kanatna Str, UA-65039 Odessa, Ukraine
2 shared publications - Alfred Tsykalo
Одеська національна академія харчових технологій, Одеса, Україна
1 shared publication - I. Kondratenko1 shared publication
Iryna Kuzneсova
Odesa National University of Technology
1 shared publication- Leonid Kaprelyants
Odessa National Academy of Food Technologies Kanatna str., 112, Odessa, Ukraine, 65039
1 shared publication
Latest Publications
- Open Access
- 19 October 2025
- Published by Oles Honchar Dnipropetrovsk National University in Journal of Chemistry and Technologies
- Vol. 33 (3) , 790-799
ОТРИМАННЯ ТА ДОСЛІДЖЕННЯ КИСЛОТНО-ОСНОВНИХ ТА ІОНООБМІННИХ ВЛАСТИВОСТЕЙ БІОЧАРУ З РИСОВОГО ЛУШПИННЯ
Odesa region is a leader in Ukraine in rice production, which makes the issue of utilizing rice by-products particularly relevant. Rice husks are considered as a promising raw material for the production of biochar. The aim of this study is to synthesise biochar, which is used as a carrier for immobilizing the isolated soil microbial complex for the treatment of oil-containing wastewater, and to study its acid-base and ion-exchange characteristics. The analysis of potentiometric titration curves indicates the contribution of different ionized groups to the general properties of biochar, which allows it to be classified as a polyfunctional ion exchanger. It is proved that due to the properties of ampholytes, biochar can be used as a matrix for immobilization of microbial complexes, capable of acting as a buffer by regulating the pH level.
- 19 October 2025
- Published by Oles Honchar Dnipropetrovsk National University in Journal of Chemistry and Technologies
- Vol. 33 (3) , 790-799
Open AccessОТРИМАННЯ ТА ДОСЛІДЖЕННЯ КИСЛОТНО-ОСНОВНИХ ТА ІОНООБМІННИХ ВЛАСТИВОСТЕЙ БІОЧАРУ З РИСОВОГО ЛУШПИННЯ
Odesa region is a leader in Ukraine in rice production, which makes the issue of utilizing rice by-products particularly relevant. Rice husks are considered as a promising raw material for the production of biochar. The aim of this study is to synthesise biochar, which is used as a carrier for immobilizing the isolated soil microbial complex for the treatment of oil-containing wastewater, and to study its acid-base and ion-exchange characteristics. The analysis of potentiometric titration curves indicates the contribution of different ionized groups to the general properties of biochar, which allows it to be classified as a polyfunctional ion exchanger. It is proved that due to the properties of ampholytes, biochar can be used as a matrix for immobilization of microbial complexes, capable of acting as a buffer by regulating the pH level.
- 1 January 2025
- Published by Lviv Polytechnic National University in Environmental Problems
- Vol. 10 (2) , 168-181
COMPREHENSIVE REVIEW OF PROBLEMS, INTERNATIONAL TRENDS AND STRATEGIC APPROACHES TO SOLVING THE PROBLEM OF FORECASTING CLIMATE PARAMETERS IN THE CONTEXT OF ADAPTATION TO CLIMATE CHANGE
The article is dedicated to the current issue of forecasting climate parameters in the context of the regular trends of adaptation by all subjects to climate change. The work comprehensively investigates the existing problems in the realm of current climate changes, focusing on contemporary international trends and strategic approaches to addressing this issue, considering the implementation`s state of the measures for climate change adaptation. The aim of the research is to draw attention to the escalating problem of accelerated climate change due to harmful anthropogenic impacts by humanity. The analysis has shown that humanity's ever-increasing harm to the environment disproportionately exceeds efforts for adaptation to climate change, which directly affects economic (industry, energy, trade), social (public health, food security and demographic sectors), and other critical areas of human activity. The article explores the main legal framework at both national and international levels, as well as enumerates global trends and tactical, strategic approaches aimed at reducing anthropogenic impacts on nature and implementing measures for climate change adaptation.
- 1 January 2025
- Published by Lviv Polytechnic National University in Environmental Problems
- Vol. 10 (2) , 168-181
COMPREHENSIVE REVIEW OF PROBLEMS, INTERNATIONAL TRENDS AND STRATEGIC APPROACHES TO SOLVING THE PROBLEM OF FORECASTING CLIMATE PARAMETERS IN THE CONTEXT OF ADAPTATION TO CLIMATE CHANGE
The article is dedicated to the current issue of forecasting climate parameters in the context of the regular trends of adaptation by all subjects to climate change. The work comprehensively investigates the existing problems in the realm of current climate changes, focusing on contemporary international trends and strategic approaches to addressing this issue, considering the implementation`s state of the measures for climate change adaptation. The aim of the research is to draw attention to the escalating problem of accelerated climate change due to harmful anthropogenic impacts by humanity. The analysis has shown that humanity's ever-increasing harm to the environment disproportionately exceeds efforts for adaptation to climate change, which directly affects economic (industry, energy, trade), social (public health, food security and demographic sectors), and other critical areas of human activity. The article explores the main legal framework at both national and international levels, as well as enumerates global trends and tactical, strategic approaches aimed at reducing anthropogenic impacts on nature and implementing measures for climate change adaptation.
- 1 January 2021
- Published by Lviv Polytechnic National University in Environmental Problems
- Vol. 6 (1) , 7-14
IMPROVEMENT OF TECHNOLOGY OF THE LIQUID WASTE PURIFICATION FROM FERMENTATION PRODUCTION
One of the areas of waste disposal of fermentation industries is anaerobic fermentation and biogas production, which becomes increasingly attractive for researchers not only because of the global energy crisis but also the environmental one. Biogas production is based on methane fermentation fundamentally different from other types of fermentation, which creates certain difficulties in its implementation on a large scale. Therefore, the development of innovative energy and resource-saving technologies for the processing of liquid waste from fermentation industries is an urgent task for the development of the domestic food industry. The aim of the work is to develop, theoretically substantiate and experimentally test the technology of processing liquid waste from fermentation plants.
- 1 January 2021
- Published by Lviv Polytechnic National University in Environmental Problems
- Vol. 6 (1) , 7-14
IMPROVEMENT OF TECHNOLOGY OF THE LIQUID WASTE PURIFICATION FROM FERMENTATION PRODUCTION
One of the areas of waste disposal of fermentation industries is anaerobic fermentation and biogas production, which becomes increasingly attractive for researchers not only because of the global energy crisis but also the environmental one. Biogas production is based on methane fermentation fundamentally different from other types of fermentation, which creates certain difficulties in its implementation on a large scale. Therefore, the development of innovative energy and resource-saving technologies for the processing of liquid waste from fermentation industries is an urgent task for the development of the domestic food industry. The aim of the work is to develop, theoretically substantiate and experimentally test the technology of processing liquid waste from fermentation plants.
- 26 September 2020
- Published by Odesa National University of Technology in Food Science and Technology
- Vol. 14 (3) , 122-129
RESEARCH AND ASSESSMENT OF THE ENVIRONMENTAL SECURITY OF BAKERY ENTERPRISES
The paper considers how to decrease the concentration of nitrogen oxides in gas emissions of bakery enterprises. Nitrogen oxides (NOx) formed in the course of burning natural gas are responsible for more than 90% of an enterprise’s hazard category. So, it has been determined how much NOx is contained in exhaust gases emitted at different loadings on the floor of the oven at an enterprise, this parameter being the main characteristic of the effectiveness of ovens and their impact on the environment. The paper presents the results of experiments that have allowed determining the regression equations describing how the NOx quantity per unit of output in an enterprise’s exhaust gases depends on the amount of the fuel consumed and on the loading on the floor of baking ovens. The procedure of the experiments has been described, and the numerical results have been presented and analysed. It has been established that when making a loaf of wheat-flour oven-bottom bread weighing 0.9 kg, with 70% loading on the floor of an oven (PPC1381), the nitrogen oxides concentration in combustion products is 212.00 μg/m3, and the specific NOx formation is 292.25 μg/kg. The nitrogen oxides concentration is 152.00 μg/m3, and the specific formation is 306.00 μg/kg when the oven floor loading is 40%. If a similar range of products is baked in ovens Minel100 with the maximum-loaded and half-loaded oven floor, the production is accompanied by specific nitrogen oxide emissions of 239.50 μg/kg and 247.80 μg/kg respectively. When enriched buns of 0.1 kg are baked in ovens BN50 with the maximum-loaded and half-loaded oven floor, the process is accompanied by specific nitrogen oxide emissions of 209.20 μg/kg and 265.96 μg/kg respectively. The nitrogen oxides content in gases withdrawn from bakery ovens has been instrumentally measured. This has allowed obtaining regression equations of dependence of the specific NOx weight in gas emissions on the amount of fuel consumed and on the oven floor loading. It has been found that in the ovens considered, the nitrogen oxide formation per output unit decreased when the oven floor loading increased, because less fuel is needed to make up for the loss of heat accompanying the emission of fumes. The contributions of the argument parameters have been determined according to the regression model to estimate the quantitative dependence. The amount of nitrogen oxides depends on the oven floor loading. A mathematical model has been developed describing how nitrogen oxide formation depends on the oven floor loading and fuel consumption. The model can be used to introduce an industry standard of quantification of nitrogen oxides formed when manufacturing a unit of output.
- 26 September 2020
- Published by Odesa National University of Technology in Food Science and Technology
- Vol. 14 (3) , 122-129
RESEARCH AND ASSESSMENT OF THE ENVIRONMENTAL SECURITY OF BAKERY ENTERPRISES
The paper considers how to decrease the concentration of nitrogen oxides in gas emissions of bakery enterprises. Nitrogen oxides (NOx) formed in the course of burning natural gas are responsible for more than 90% of an enterprise’s hazard category. So, it has been determined how much NOx is contained in exhaust gases emitted at different loadings on the floor of the oven at an enterprise, this parameter being the main characteristic of the effectiveness of ovens and their impact on the environment. The paper presents the results of experiments that have allowed determining the regression equations describing how the NOx quantity per unit of output in an enterprise’s exhaust gases depends on the amount of the fuel consumed and on the loading on the floor of baking ovens. The procedure of the experiments has been described, and the numerical results have been presented and analysed. It has been established that when making a loaf of wheat-flour oven-bottom bread weighing 0.9 kg, with 70% loading on the floor of an oven (PPC1381), the nitrogen oxides concentration in combustion products is 212.00 μg/m3, and the specific NOx formation is 292.25 μg/kg. The nitrogen oxides concentration is 152.00 μg/m3, and the specific formation is 306.00 μg/kg when the oven floor loading is 40%. If a similar range of products is baked in ovens Minel100 with the maximum-loaded and half-loaded oven floor, the production is accompanied by specific nitrogen oxide emissions of 239.50 μg/kg and 247.80 μg/kg respectively. When enriched buns of 0.1 kg are baked in ovens BN50 with the maximum-loaded and half-loaded oven floor, the process is accompanied by specific nitrogen oxide emissions of 209.20 μg/kg and 265.96 μg/kg respectively. The nitrogen oxides content in gases withdrawn from bakery ovens has been instrumentally measured. This has allowed obtaining regression equations of dependence of the specific NOx weight in gas emissions on the amount of fuel consumed and on the oven floor loading. It has been found that in the ovens considered, the nitrogen oxide formation per output unit decreased when the oven floor loading increased, because less fuel is needed to make up for the loss of heat accompanying the emission of fumes. The contributions of the argument parameters have been determined according to the regression model to estimate the quantitative dependence. The amount of nitrogen oxides depends on the oven floor loading. A mathematical model has been developed describing how nitrogen oxide formation depends on the oven floor loading and fuel consumption. The model can be used to introduce an industry standard of quantification of nitrogen oxides formed when manufacturing a unit of output.
- Open Access
- 5 October 2017
- Published by Odesa National University of Technology in Food Science and Technology
- Vol. 11 (3)
XYLOOLIGOSACCHARIDES FROM AGRICULTURAL BY-PRODUCTS: CHARACTERISATION, PRODUCTION AND PHYSIOLOGICAL EFFECTS
The current study is a review of characteristics, production, physiological properties and application of xylooligosaccharides (XOS). XOS are the carbohydrates, their molecules are built from xylose residues linked mainly by в-(1→4)-glycoside bonds. Xylan is important for plant cell walls and is widely spread component in agricultural by-products. XOS are products of xylan hydrolytic degradation, and exhibiting the high prebiotic potential. The XOS preparation of wheat and rye bran stimulated the cells accumulation ‑ 1,4∙1010 CFU/cm3 of L. аcidophilus and 9,2∙1010 CFU/cm3 of В. bifidum. A difference in XOS molecules branching causes a wide range of their physiological properties: antioxidant, immunomodulation, antimicrobial, anti-inflammatory, anticarcinogenic. XOS can reduce high cholesterol level and triglycerides in blood plasma. XOS application reviewed in this article opens new perspectives on its potential use for human consumption. The rich sources of xylan are wheat, rye and barley bran, rice husk, wheat straw, corncobs, cotton stalk. Industrial way of XOS production includes chemical or enzymatic hydrolysis with following purification. Chemical methods are based on hydrothermal pretreatment and acidic or alkali extraction. Obtained oligosaccharides have a wide range of polymerization degree (DP) from 2 to 20. Enzymatic methods include fermentation with xylanase that allow controlling the XOS accumulation with certain DP. The different chromatographic purification after hydrolysis is used for analytical purposes. There are anion-exchange, size-exclusion, affinity, size-exclusion high-performance liquid chromatography. In addition, biomethods are preferred for XOS used in food, because such preparations do not contain monosaccharides and furfural as contaminants. XOS are stable in a wide range of temperature and pH, justifying the development of new synbiotics generation. Most widely XOS are used in production of functional products and pharmaceutical preparations. But they are also applied in cosmetic, agricultural and mixed feed industries.
- 5 October 2017
- Published by Odesa National University of Technology in Food Science and Technology
- Vol. 11 (3)
Open AccessXYLOOLIGOSACCHARIDES FROM AGRICULTURAL BY-PRODUCTS: CHARACTERISATION, PRODUCTION AND PHYSIOLOGICAL EFFECTS
The current study is a review of characteristics, production, physiological properties and application of xylooligosaccharides (XOS). XOS are the carbohydrates, their molecules are built from xylose residues linked mainly by в-(1→4)-glycoside bonds. Xylan is important for plant cell walls and is widely spread component in agricultural by-products. XOS are products of xylan hydrolytic degradation, and exhibiting the high prebiotic potential. The XOS preparation of wheat and rye bran stimulated the cells accumulation ‑ 1,4∙1010 CFU/cm3 of L. аcidophilus and 9,2∙1010 CFU/cm3 of В. bifidum. A difference in XOS molecules branching causes a wide range of their physiological properties: antioxidant, immunomodulation, antimicrobial, anti-inflammatory, anticarcinogenic. XOS can reduce high cholesterol level and triglycerides in blood plasma. XOS application reviewed in this article opens new perspectives on its potential use for human consumption. The rich sources of xylan are wheat, rye and barley bran, rice husk, wheat straw, corncobs, cotton stalk. Industrial way of XOS production includes chemical or enzymatic hydrolysis with following purification. Chemical methods are based on hydrothermal pretreatment and acidic or alkali extraction. Obtained oligosaccharides have a wide range of polymerization degree (DP) from 2 to 20. Enzymatic methods include fermentation with xylanase that allow controlling the XOS accumulation with certain DP. The different chromatographic purification after hydrolysis is used for analytical purposes. There are anion-exchange, size-exclusion, affinity, size-exclusion high-performance liquid chromatography. In addition, biomethods are preferred for XOS used in food, because such preparations do not contain monosaccharides and furfural as contaminants. XOS are stable in a wide range of temperature and pH, justifying the development of new synbiotics generation. Most widely XOS are used in production of functional products and pharmaceutical preparations. But they are also applied in cosmetic, agricultural and mixed feed industries.