XZXuehua Zhang

Xuehua Zhang

*This is an algorithmically generated author record based on publicly available information.

Xuehua Zhang has a total of 27 co-authors. Here are the top co-authors by number of shared publications:

  • Fangren Hu

    College of Electronic and Optical Engineering & College of Flexible Electronics (Future Technology), Nanjing University of Posts and Telecommunications, Nanjing, China

    11 shared publications
  • Wei Zhang

    Nanjing Univ Posts & Telecommun, Coll Elect & Opt Engn, Nanjing 210023, Jiangsu, Peoples R China

    6 shared publications
  • Shun Liu

    College of Electronic and Optical Engineering & College of Microelectronics, Nanjing University of Posts and Telecommunications, Nanjing, China

    5 shared publications
  • Yaqi Zhang

    Nanjing Univ Posts & Telecommun, Coll Elect & Opt Engn, Nanjing 210023, Jiangsu, Peoples R China

    4 shared publications
  • Rui Sun

    Nanjing University of Posts & Telecommunications

    3 shared publications
  • Wei Zhang

    College of Electronic and Optical Engineering & College of Flexible Electronics (Future Technology), Nanjing University of Posts and Telecommunications, Nanjing, China

    3 shared publications

Latest Publications

  • Effects of germanium content on the optical properties of GeO2-based organic-inorganic composite films doped with azobenzene

    by Xuehua Zhang, Jie Cao, Xingyun Wang, Wei Zhang, Fangren Hu

    Organic-inorganic composite materials have great applications in integrated optics due to their good optical performance. In this study, GeO2-based organic-inorganic composite films doped with azobenzene were prepared by combining the solgel technique and the spin-coating method. The optical waveguide properties including the refractive index and film thickness and the optical response properties of the composite films with different germanium contents have been investigated. The results indicate that the refractive index of the film increases, but the film thickness decreases as the germanium content increases. The composite film with 0.2 mol of germanium exhibits the best optical response properties. Further, the optical switching characteristics of the optimal composite film shows good stability and reversibility. The photochemical and structural properties of the film were also investigated by using Fourier transform infrared spectroscopy and thermo-gravimetric analysis. Finally, hexagonal microlens arrays were built in the film by using the UV nanoimprint technique, resulting in neatly arranged structures with good optical imaging performance.

  • Fabrication and Characterizations of Superhydrophobic Surface with Superior Corrosion Inhibition on Q345b Steel Substrate

    by Xuehua Zhang, Xiaoyu Tu, Li Zhou, Fangren Hu

    In this work, a coherent and cost‐effective method is developed to achieve superhydrophobicity and excellent corrosion resistance on Q345B steel surfaces. The method involves sequential etching with hydrochloric acid and hydrofluoric acid, passivation with potassium permanganate, treatment with bis‐(γ‐triethoxysilylpropyl)‐tetrasulfide (KHSi69,BT), and modification with hydrophobic SiO2 nanoparticles. The effects of etching and passivation time, including SiO2 doping ratio on the wettability and corrosion resistance of the prepared surfaces are investigated. The results demonstrate that the surface exhibits a micro–nano multilayer and modified nano‐multiscale cluster structure which has a contact angle (CA) of 155.8 ± 1.7° and a sliding angle (SA) of 5 ± 0.5° by employing the following conditions: hydrochloric acid etching time of 10 min, hydrofluoric acid etching time of 25 min, passivation time of 300 min, and a 3 wt% SiO2 doping ratio. Moreover, the surface displays extremely weak droplet adhesion and excellent self‐cleaning properties. Furthermore, the corrosion inhibition of the prepared steel surface is evaluated using potentiodynamic polarization curves and electrochemical impedance spectroscopy. The results indicate that the corrosion inhibition efficiency of the superhydrophobic surface is enhanced by about 89.95% compared to the traditional two‐step processing involving etching and modification. These findings expand the potential applications of steel.


  • Open Access

    Preparation of UV Curable Optical Adhesive NOA81 Bionic Lotus Leaf Structure Films by Nanoimprint Technique and the Applications on Silicon Solar Cells

    by Xuehua Zhang, Pei Zhang, Wei Zhang, Jing Chen, Fangren Hu

    Front surface texturing is a common method used to improve the optical performance of photovoltaic devices. However, traditional texturing techniques may be challenging in some cases, such as when dealing with ultra-thin substrates. Textured polymer films on such devices would be an alternative approach. This paper reports a study of NOA81 thin films with a bionic lotus leaf surface structure on monocrystalline silicon solar cells. Inspired by the surface structure of natural lotus leaves, we successfully prepared a bionic lotus leaf microstructure film on the surface of solar cells based on NOA81 using polydimethylsiloxane (PDMS) polymer and nanoimprinting methods. Scanning electron microscopy (SEM) images showed that the surface structure of the NOA81 thin film was the same as that of natural lotus leaves. A UV-Vis spectrophotometer with an integrating sphere was used to measure the reflectance of the textured NOA81 film on the silicon wafer. Results showed that the textured NOA81 film could effectively reduce the reflectance of the silicon wafer surface. We also used finite-difference time-domain (FDTD) simulation to verify this conclusion further. Finally, the I-V characteristics of the prepared solar cells with the textured NOA81 film were investigated, and the highest photovoltaic efficiency was measured to be about 16.07%, effectively improving the photoelectric conversion efficiency. In addition, the film with textured NOA81 can be used as a protective film for monocrystalline silicon solar cells.


  • Open Access

    Photoresist Microlens Arrays Fabricated by Nanoimprint Technique to Improve the Photoelectric Conversion Efficiency of Solar Cells

    by Xuehua Zhang, Liangwei Lv, Xinwen Zhang, Fangren Hu

    Silicon solar cells have the advantages of non-toxicity, reliability, low price, and stability. Microlens arrays (MLAs) are widely used in solar cells to improve photoelectrical conversion efficiency (PCE). In this research, different MLAs mold was designed by a method of thermal reflow. Then the photoresist film MLAs structure was replicated on the surface of silicon solar cells through UV nanoimprint technology. The optical transmission and surface morphology of these photoresist films were respectively measured by using a UV spectrometer and an atomic force microscope. The surface morphology and imaging capabilities of photoresist film MLAs were respectively measured by using a scanning electron microscope and optical microscope. Finally, the photovoltaic performance of the silicon solar cell with the photoresist film MLAs was investigated, and the PCE value of the silicon solar cell improved from 11.53% for the sample without MLAs to 13.19% for the sample with the square MLAs and the PCE improvement is about 14.40%. All these results above show that the photoresist film MLAs can significantly improve the efficiency of silicon solar cells and have great application potential in the field of solar cells.


  • Influence of heating temperature on the optical response properties and surface relief patterns of TiO2/GeO2/ormosils composite films containing azobenzene

    by Xuehua Zhang, Xingyun Wang, Yaqi Zhang, Zhongjie Wang, Yongjin Wang, Fangren Hu

    With the progress of modern integrated optical technology, organic–inorganic composite materials have been widely used in integrated optoelectronic devices. Because of satisfying optical response properties among azobenzene, it will be an ideal choice to introduce the material into organic–inorganic composite materials. T i O 2 / G e O 2 / o r m o s i l s composite films containing azobenzene were prepared by combining the solgel technique with the spin-coating process. The optical transmission modes and loss of as-prepared samples at different transmission wavelengths were researched by a prism coupler. The result shows that the composite film is multi-mode transmission at the transmission wavelength of 633 nm and single-mode transmission at 1538 nm. The transmission loss is sufficient for applications in optical elements. The response properties and Fourier transform infrared spectroscopy of as-prepared samples at different heating temperatures were also studied. The composite films obtained at 50°C have the best optical response properties. Furthermore, the banding energy and chemical composition among the films were measured through x-ray photoelectron spectroscopy. Finally, the surface topography of as-prepared samples was observed by atomic force microscopy. The surface of the composite film appears with patterns of relief under the appropriate temperature. The above results show that the as-prepared T i O 2 / G e O 2 / o r m o s i l s composite films containing azobenzene will be a kind of ideal material in the field of integrated optics applications.

  • Fabrication of microlens arrays with high filling factors by combining a thermal reflow and parylene CVD technique and the applications on OLEDs

    by Rui Sun, Xuehua Zhang, Yaqi Zhang, Xinwen Zhang, Fangren Hu

    In this paper, microlens array (MLA) templates with high filling factors were prepared by combining a thermal reflow method and parylene chemical vapor deposition (CVD). Then photoresist MLAs were replicated from the MLA templates by using ultraviolet nanoimprint technology. The surface morphology of the replicated photoresist MLAs was characterized by scanning an electron microscope and optical microscope. Results show that the photoresist MLAs have a relatively smooth surface, and the filling factor has been improved obviously. Also, the surface profiles of the MLAs were measured. The optical imaging properties of the MLAs were also characterized, and they had a relatively good imaging performance. Finally, the photoresist MLAs were applied on organic LEDs (OLEDs), and their luminance and current efficiencies were measured. Results show that the current efficiency of the OLEDs increased by about 42.41%, 29.01%, and 35.51%, respectively, for OLEDs with circular, hexagonal, and square MLAs. All the results above indicate that it is a simple and effective process to prepare MLA templates with high filling factors by combining thermal reflow and CVD techniques, and the prepared photoresist MLAs have great application potential in OLED areas.


  • Open Access

    Organic–Inorganic Hybrid Film MLAs Built on the Silicon Solar Cells to Improve the Photoelectric Conversion Efficiency

    by Xuehua Zhang, Yang Bi, Shun Liu, Wei Zhang, Fangren Hu

    Light trapping micro-nano structures have been widely used to optimize the function of solar cell devices, especially microlens arrays (MLAs). In this article, we first prepared composite films by using sol-gel technology and the spin coating method, and then constructed heteromorphic MLAs on the surface of the composite films by using thermal reflow and UV nanoimprint technology; the substrate used was the silicon solar cell. Finally, the performance of the cells was improved. Optical transmission properties and surface morphology of the organic–inorganic hybrid films were detected by using a UV-Vis spectrometer and atomic force microscopy, respectively; it was revealed that the hybrid films had relatively excellent optical transmission performance in the visible light range. Surface structure of the hybrid film MLAs were detected by using SEM. At the same time, the optical imaging capabilities of MLAs were studied by using optical microscopy. Besides, the contact angles of the MLAs were also measured. It can be clearly seen that the prepared MLAs have a regular arrangement, clean appearance, and good imaging capabilities (from the actual test results). Finally, the various parameters of the silicon solar cells with hybrid film MLAs were studied. In addition, the power conversion efficiency (PCE) values increased by about 10.48% for the silicon solar cell with circular MLAs, compared to the silicon solar cell without a structure. The results show a concise and effective method to prepare organic–inorganic hybrid film MLAs on silicon solar cells, with significant improvement in photoelectric conversion efficiency.


  • PMMA-doped composite films microlens arrays on a flexible substrate for improving extraction of an organic light-emitting diode

    by Xuehua Zhang, Jingwei Xie, Yaqi Zhang, Rui Sun, Shun Liu, Wei Zhang, Xinwen Zhang, Fangren Hu

    Poly (methyl methacrylate) (PMMA)-doped organic-inorganic composite films are prepared on flexible substrates through a combination of the sol-gel technique and the spin-coating method. Circular and hexagonal microlens arrays (MLAs) are then built into the composite films by using ultraviolet nanoimprint technology. Atomic force microscope and ultraviolet spectrophotometer characterization results of the films show that the films have low surface roughness and good optical transmittance. A scanning electron microscope is used to observe the surface morphology of the MLAs, and the results show that the prepared MLAs are regular and neat. The surface profiles of the MLAs are also measured by using a surface profiler. Optical microscopy results show that the prepared MLAs have good optical imaging properties. Finally, the MLAs are applied on the green organic light-emitting diodes (OLEDs), and the influence of the shape and diameter of the MLAs on the luminance and current efficiency of the OLEDs is discussed. Results indicate that there is a relatively high enhancement of the current efficiency and luminance for the OLEDs with hexagonal MLAs and a single microlens height of 9 µm, where the luminance can reach 10611 c d / c m 2 , and the current efficiency can be enhanced by about 20.1%. Furthermore, there is a higher enhancement of the luminance and current efficiency for the OLEDs with PMMA-doped MLAs than that of the OLEDs with no PMMA-doped MLAs. Based on these results, we believe that the obtained PMMA-doped composite film MLAs on flexible substrates have important applications in the flexible OLEDs displays areas.


  • Fabrication of heteromorphic microlens arrays built in the TiO2/ormosils composite films for organic light-emitting diode applications

    by Xuehua Zhang, Yue Zhang, Yaqi Zhang, Jingwei Xie, Shun Liu, Wei Zhang, Xinwen Zhang, Fangren Hu