Jianlong Xiu

High-temperature and high-salinity reservoirs (typically referring here to temperatures ≥ 100 °C and salinities > 100 g/L) impose stringent requirements on chemical flooding and profile-control agents, particularly in terms of thermal stability, salt tolerance, injectivity, and environmental compatibility. In this study, a bio-based composite mobility-control and oil-displacement system was developed by combining carbonized corn-straw particles with the biopolymer scleroglucan. Corn-straw biomass particles were prepared by pyrolysis at 500 °C followed by ball milling for 2 h. Their particle-size distribution, elemental composition, and suspension stability were characterized, and the rheological behavior, thermal and salt tolerance, long-term aging stability, injectivity, plugging performance, and enhanced-oil-recovery efficiency of the composite system were evaluated systematically. The average particle size decreased from 25.6 μm for mechanically ground straw to 2.8 μm after carbonization and ball milling. The H/C atomic ratio of the carbonized particles was 0.31, indicating enhanced aromatization and structural stability. A scleroglucan concentration of 1000 ppm provided a suspension rate of 97%, balancing suspension stability and chemical dosage. The composite system maintained stable viscosity and viscoelasticity from 30 to 130 °C in deionized water, saturated NaCl solution, and saturated CaCl₂ solution, with viscosity loss below 10%. After sealed anaerobic aging at 100 °C for 28 days, the viscosity retention remained above 90%. Sand-pack tests showed stable injectivity in media with permeabilities of 1235 and 2064 mD and a plugging efficiency of 95.7% in a 2846 mD model. In oil-displacement experiments, the composite system increased the final recovery factor from 46.6% for scleroglucan flooding alone to 53.3%, corresponding to an additional 6.7 percentage points. These results demonstrate that the carbonized biomass particle-scleroglucan system has promising thermal stability, salt tolerance, plugging capacity, and oil-displacement performance, providing a potential green strategy for mobility control in harsh reservoir environments.

Bio-gels are a class of functional polymeric materials with three-dimensional network structures. Their exceptional biocompatibility, biodegradability, high specific surface area, and tunable physicochemical properties make them highly promising for environmental remediation. This article systematically reviews the classification of bio-gels based on source, cross-linking mechanisms, and functional attributes. It also elaborates on their fundamental properties such as porous structure, high water absorbency, stimuli-responsiveness, and mechanical stability and examines how these properties influence their environmental remediation efficiency. This review comprehensively analyze the mechanisms and efficacy of bio-gels in adsorbing heavy metal ions, removing organic dyes, improving soil water retention, and restoring ecosystems. Special attention is given to the interactions between surface functional groups and contaminants, the role of porous structures in mass transfer, and the ecological effects within soil–plant systems. Additionally, this review explores extended applications of bio-gels in medical tissue engineering, controlled release of drugs and fertilizers, and enhanced oil recovery, highlighting their versatility as multifunctional materials. Finally, based on current progress and challenges, this review outline key future research directions. These include elucidating microscopic interaction mechanisms, developing low-cost renewable feedstocks, designing multi-stimuli-responsive structures, improving long-term stability, and establishing full life-cycle environmental safety assessments. These efforts will help advance the efficient, precise, and sustainable use of bio-gels in environmental remediation, offering innovative solutions to complex environmental problems.

In the development of high-temperature and high-salinity oil fields, biopolymer scleroglucan flooding technology faces significant challenges. Traditional scleroglucan products exhibit poor injectability and high extraction costs. This study investigated the application potential of the original fermentation broth of exopolysaccharides (EPS) produced by microorganisms in a simulated high-temperature and high-salinity oil reservoir environment. The polysaccharide was identified as scleroglucan through IR and NMR analysis. Its stability and rheological properties were comprehensively evaluated under extreme conditions, including temperatures up to 150 °C, pH levels ranging from 1 to 13, and salinities up to 22 × 10⁴ mg/L. The results demonstrated that EPS maintained excellent viscosity and stability, particularly at 76.6 °C and 22 × 10⁴ mg/L salinity, where its viscosity remained above 80% for 35 days. This highlights its significant viscoelasticity and stability in high-temperature and high-salinity oil reservoirs. Additionally, this study, for the first time, examined the rheological properties of the original fermentation broth of scleroglucan, specifically assessing its injectability and enhanced oil recovery (EOR) performance in a simulated Middle Eastern high-temperature, high-salinity, medium-low permeability reservoir environment. The findings revealed an effective EOR exceeding 15%, confirming the feasibility of using the original fermentation broth as a biopolymer for enhancing oil recovery in extreme reservoir conditions. Based on these experimental results, it is concluded that the original fermentation broth of Athelia rolfsii exhibits superior performance under high-temperature and high-salinity conditions in medium–low permeability reservoirs, offering a promising strategy for future biopolymer flooding in oil field development.

The study of seepage laws during microbial enhanced oil recovery helps to elucidate the mechanisms behind microbial flooding, and the use of large-scale physical simulation experimental devices can more objectively and accurately investigate the seepage laws of microbes in porous media, and evaluate the oil displacement efficiency of microbial systems. In this study, physical simulation experiments of microbial flooding were conducted via a slab outcrop core, and the biochemical parameters such as the concentration of Bacillus subtilis, nutrient concentration, surface tension, and displacement pressure data were tracked and evaluated. The analysis revealed that the characteristics of the pressure field change during microbial flooding and elucidates the migration rules of microbes and nutrients, as well as the change rule of surface tension. The results show that after the microbial system is injected, cells and nutrients are preferentially distributed near the injection well and along the main flow paths, with the bacterial adsorption and retention capacity being greater than those of the nutrient agents. Owing to the action of microorganisms and their metabolites, the overall pressure within the model increased, From the injection well to the production well, the pressure in the model decreases stepwise, and the high-pressure gradient zone is mainly concentrated near the injection well. The fermentation mixture of Bacillus subtilis increased the injection pressure by 0.73 MPa, reduced the surface tension by up to 49.8%, and increased the oil recovery rate by 6.5%.

Microbial remediation has been regarded as one of the most promising decontamination techniques for crude oil pollution. However, there are few studies on the interaction of bacteria in the microbial community during bioremediation. The aim of this work was to research the promotion of defined co-culture of Bacillus subtilis SL and Pseudomonas aeruginosa WJ-1 for biodegradation of crude oil. After 7 days of incubation, the analysis of residual oil, saturated and aromatic fraction in the samples showed that the degradation efficiency of them was significantly improved. The degradation efficiency of crude oil was enhanced from 32.61% and 54.35% in individual culture to 63.05% by the defined co-culture of strains SL and WJ-1. Furthermore, it was found that the defined co-culture system represented relatively excellent performance in bacterial growth, cell surface hydrophobicity (CSH) and emulsification activity. These results indicated that the combination of Bacillus subtilis and Pseudomonas aeruginosa can effectively promote the degradation and utilization of crude oil, which may provide a new idea for the improvement of bioremediation strategies.

Biosurfactants have significant applications in various industries, including microbial-enhanced oil recovery (MEOR). While the state-of-the-art genetic approaches can generate high-yield strains for biosurfactant production in fermenters, there remains a critical challenge in enhancing biosurfactant-producing strains for use in natural environments with minimal ecological risks. The objectives of this work are enhancing the strain’s capacity for rhamnolipids production and exploring the genetic mechanisms for its improvement. In this study, we employed atmospheric and room-temperature plasma (ARTP) mutagenesis to enhance the biosynthesis of rhamnolipids in Pseudomonas sp. L01, a biosurfactant-producing strain isolated from petroleum-contaminated soil. Following ARTP treatment, we identified 13 high-yield mutants, with the highest yield of 3.45 ± 0.09 g/L, representing a 2.7-fold increase compared to the parent strain. To determine the genetic mechanisms behind the enhanced rhamnolipids biosynthesis, we sequenced the genomes of the strain L01 and five high-yield mutants. A comparative genomic analysis suggested that mutations in genes related to the synthesis of lipopolysaccharides (LPS) and the transport of rhamnolipids may contribute to the improved biosynthesis. To the best of our knowledge, this is the first instance of utilizing the ARTP approach to improve rhamnolipid production in Pseudomonas strains. Our study provides valuable insights into the enhancement of biosurfactant-producing strains and the regulatory mechanisms of rhamnolipids biosynthesis.

Clarifying the water invasion rule of edge and bottom water reservoirs can adjust the reservoir development mode and improve the recovery factor of edge and bottom water reservoirs in a timely manner. Influenced by the size of a reservoir water body, energy intensity and reservoir seepage capacity, the change model of reservoir water influx basically belongs to the exponential growth model of the GM (1,1) model or the self-constraint growth model of the logistic model. The above two models are used to predict and analyze the water inflow of edge and bottom water reservoirs, respectively, and it is found that the change in water inflow of the reservoir with sufficient edge and bottom water energy is more consistent with the prediction results of the GM (1,1) model, but it has a large error compared to the prediction results of the logistic model. The change in water influx in the reservoir with insufficient edge and bottom water energy is consistent with the prediction results of the logistic model and GM (1,1) model. The research shows that the strength of edge and bottom water energy of the reservoir can be determined by analyzing the error of the logistic model in predicting water influx. If we focus on the change in reservoir water influx, the improved GM (1,1) model formed by a Newton parabola interpolation polynomial is used to optimize its background value, which can further improve the prediction accuracy and reduce the prediction error of water inflow of edge and bottom water reservoirs. The method in this paper has certain reference significance for studying the water invasion rule and energy intensity of edge and bottom water reservoirs.

Biosurfactants are a group of surface-active compounds that can be produced by diverse microorganisms. They have been widely used in various industrial fields. Reducing production costs, improving efficiency, and collecting more diverse producing strains have become major challenges in the biosurfactant industry. These challenges could be overcome by screening for more diverse and efficient biosurfactant-producing strains. The conventional methods for the isolation and functional characterization of microorganisms are laborious and biased toward fast-growing or strongly competitive microorganisms. Here, we established a high-throughput approach of single-cell-based cultivation and functional characterization of biosurfactant-producing bacteria (SCCBB). This approach combines single-cell cultivation with the detection of optical distortions. Using this approach, we isolated 431 strains with biosurfactant production potential from petroleum-contaminated soil and oilfield-produced water. The surfactant production capabilities of the strains were subsequently validated using surface tension measurements, TLC, and CMC measurements. To investigate the industrial production potential, we optimized the production conditions of a representative glycolipids-producing strain, Pseudomonas sp. L01, using response surface methodology (RSM). Optimal conditions yielded a crude biosurfactant yield of 8.43 g/L in a flask. Our work provides a high-throughput approach to the isolation and screening of biosurfactant-producing bacteria, as well as other functional bacteria in a wide range of fields.

Microbial enhanced oil recovery (MEOR) technology is an environmental-friendly EOR method that utilizes the microorganisms and their metabolites to recover the crude oil from reservoirs. This study aims to research the potential application of strain SL in low permeability reservoirs. Strain SL is identified as Bacillus subtilis by molecular methods. Based on the mass spectrometry, the biosurfactant produced by strain SL is characterized as lipopeptide, and the molecular weight of surfactin is 1044, 1058, 1072, 1084 Da. Strain SL produces 1320 mg/L of biosurfactant with sucrose as the sole carbon source after 72 h. With the production of biosurfactant, the surface tension of cell-free broth considerably decreases to 25.65 ± 0.64 mN/m and the interfacial tension against crude oil reaches 0.95 ± 0.22 mN/m. The biosurfactant exhibits excellent emulsification with crude oil, kerosene, octane and hexadecane. In addition, the biosurfactant possesses splendid surface activity at pH 5.0–12.0 and NaCl concentration of 10.0% (w/v), even at high temperature of 120 °C. The fermentation solution of strain SL is applied in core flooding experiments under reservoir conditions and obtains additional 5.66% of crude oil. Hence, the presented strain has tremendous potential for enhancing the oil recovery from low-permeability reservoirs.