Jasleen Lall
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Jasleen Lall has a total of 5 co-authors. Here are the top co-authors by number of shared publications:
- Hans Zappe
University of Freiburg
3 shared publications - Yannick Folwill
Univ. of Freiburg (Germany)
2 shared publications Hans Zappe
1 shared publication- Ziyu Wang
China Academy of Space Technology (CAST)
1 shared publication - Zouheir Zeitouny
Gisela and Erwin Sick Chair of Micro-optics, Department of Microsystems Engineering, University of Freiburg, Freiburg, Germany
1 shared publication
Latest Publications
- Open Access
- 14 April 2023
- Published by Wiley in Macromolecular Materials and Engineering
- Vol. 308 (5)
Understanding Photomechanical Behavior of Liquid Crystalline‐Based Actuators
Liquid crystalline‐based actuators containing azobenzene photoswitches have been used to demonstrate light‐responsive motion in soft actuator systems. Understanding the mechanical performance of these light‐responsive actuators as a function of the polymer chemistry as well as the nature and concentration of the photoswitches is crucial for developing advanced applications. A systematic study is presented here that clarifies the role of azobenzene photoswitches and the liquid crystalline networks in generating the desired photomechanical performance. Through measurement of photo stimulated mechanical behavior, in particular generated force and strain, a generalized set of guidelines concerning the appropriate subset of polymer chemistry and photoswitches required to achieve the desired performance for actuator design is derived.
- 14 April 2023
- Published by Wiley in Macromolecular Materials and Engineering
- Vol. 308 (5)
Open AccessUnderstanding Photomechanical Behavior of Liquid Crystalline‐Based Actuators
Liquid crystalline‐based actuators containing azobenzene photoswitches have been used to demonstrate light‐responsive motion in soft actuator systems. Understanding the mechanical performance of these light‐responsive actuators as a function of the polymer chemistry as well as the nature and concentration of the photoswitches is crucial for developing advanced applications. A systematic study is presented here that clarifies the role of azobenzene photoswitches and the liquid crystalline networks in generating the desired photomechanical performance. Through measurement of photo stimulated mechanical behavior, in particular generated force and strain, a generalized set of guidelines concerning the appropriate subset of polymer chemistry and photoswitches required to achieve the desired performance for actuator design is derived.
- Open Access
- 13 October 2022
- Published by IOP Publishing in Smart Materials and Structures
- Vol. 31 (11) , 115014
MEMS-compatible structuring of liquid crystal network actuators using maskless photolithography
We present a method to structure liquid crystal network actuators based on selectively polymerizing the network without any physical or hard masks in a process compatible with microelectromechanical system (MEMS) technology. The standard glass-cell filling technique is used to generate the actuator films; subsequently, selected areas are exposed to light and thus polymerized to structure the actuators. No further machining, such as laser cutting, is necessary. The polymerization pattern is defined by projection using a digital micromirror device-based optomechanical setup, with a resolution ranging from 1 to 2 mm. These processes are used to structure photothermally and photochemically stimulated actuators, which may thus be fabricated with high throughput and easily integrated with MEMS devices.
- 13 October 2022
- Published by IOP Publishing in Smart Materials and Structures
- Vol. 31 (11) , 115014
Open AccessMEMS-compatible structuring of liquid crystal network actuators using maskless photolithography
We present a method to structure liquid crystal network actuators based on selectively polymerizing the network without any physical or hard masks in a process compatible with microelectromechanical system (MEMS) technology. The standard glass-cell filling technique is used to generate the actuator films; subsequently, selected areas are exposed to light and thus polymerized to structure the actuators. No further machining, such as laser cutting, is necessary. The polymerization pattern is defined by projection using a digital micromirror device-based optomechanical setup, with a resolution ranging from 1 to 2 mm. These processes are used to structure photothermally and photochemically stimulated actuators, which may thus be fabricated with high throughput and easily integrated with MEMS devices.
- Open Access
- 26 October 2020
- Published by Taylor & Francis in Liquid Crystals
- Vol. 48 (6) , 862-872
A practical guide to versatile photoalignment of azobenzenes
Photoalignment refers to a technique for the definition of the orientation of liquid crystals using light. The approach is based on the use of materials that either absorb or trigger a chemical reaction with an anisotropy that depends on the polarisation of light. Azobenzenes are a well-established for aligning liquid crystals in research applications. Despite their popularity, only few details of the process are publicly available. We consider here the optimisation of the photoalignment process using the dichroic dye Brilliant Yellow. Its solubility in various solvents; the alignment quality as a function of exposure time and intensity; the influence of humidity at various stages; and the stability of the process in the presence of environmental light are investigated. Additionally, the dichroic dyes Congo Red and Chrysophenine are tested to increase the portfolio of available photoalignment materials. Graphical abstract
- 26 October 2020
- Published by Taylor & Francis in Liquid Crystals
- Vol. 48 (6) , 862-872
Open AccessA practical guide to versatile photoalignment of azobenzenes
Photoalignment refers to a technique for the definition of the orientation of liquid crystals using light. The approach is based on the use of materials that either absorb or trigger a chemical reaction with an anisotropy that depends on the polarisation of light. Azobenzenes are a well-established for aligning liquid crystals in research applications. Despite their popularity, only few details of the process are publicly available. We consider here the optimisation of the photoalignment process using the dichroic dye Brilliant Yellow. Its solubility in various solvents; the alignment quality as a function of exposure time and intensity; the influence of humidity at various stages; and the stability of the process in the presence of environmental light are investigated. Additionally, the dichroic dyes Congo Red and Chrysophenine are tested to increase the portfolio of available photoalignment materials. Graphical abstract
- 19 May 2020
- Published by IOP Publishing in Journal of Micromechanics and Microengineering
- Vol. 30 (7) , 075002
Compact tunable mid-infrared Fabry–Pérot filters actuated by liquid crystal elastomers
We present a compact tunable Fabry–Pérot filter operating at mid-infrared wavelengths (3–5 µ m) with novel actuators based on liquid crystal elastomers (LCEs). These are a new class of shape-memory materials with potential for achieving large reversible actuation based on different external stimuli. For actuating the Fabry–Pérot filter, microheaters and thermo-actuated LCE layers were fabricated as spacers between two Bragg mirrors allowing a controlled change of the air-filled resonator. The ability to integrate LCEs with standard microfabrication techniques was thus demonstrated. The full-width at half maximum of the filter transmission peak is 143 nm at 4.58 µ m. A tuning range of 260 nm in the second interference order is realized by applying a maximum voltage of 7.3 V.
- 19 May 2020
- Published by IOP Publishing in Journal of Micromechanics and Microengineering
- Vol. 30 (7) , 075002
Compact tunable mid-infrared Fabry–Pérot filters actuated by liquid crystal elastomers
We present a compact tunable Fabry–Pérot filter operating at mid-infrared wavelengths (3–5 µ m) with novel actuators based on liquid crystal elastomers (LCEs). These are a new class of shape-memory materials with potential for achieving large reversible actuation based on different external stimuli. For actuating the Fabry–Pérot filter, microheaters and thermo-actuated LCE layers were fabricated as spacers between two Bragg mirrors allowing a controlled change of the air-filled resonator. The ability to integrate LCEs with standard microfabrication techniques was thus demonstrated. The full-width at half maximum of the filter transmission peak is 143 nm at 4.58 µ m. A tuning range of 260 nm in the second interference order is realized by applying a maximum voltage of 7.3 V.