Peter J. Hobson
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Research Interests
Peter J. Hobson has a total of 42 co-authors. Here are the top co-authors by number of shared publications:
- Niall Holmes
University of Nottingham
7 shared publications - Timothy M. Fromhold
University of Nottingham
7 shared publications - Richard Bowtell
Sir Peter Mansfield Imaging Centre, School of Physics and Astronomy, University of Nottingham
5 shared publications - Michael Packer
School of Physics and Astronomy, University of Nottingham, Nottingham NG7 2RD, United Kingdom
4 shared publications - Chris Morley
University of Nottingham
3 shared publications J. Leggett
School of Physics and Astronomy, University of Nottingham 1 , Nottingham NG7 2RD, United Kingdom
3 shared publications
Latest Publications
- Open Access
- 16 November 2026
- Published by American Physical Society (APS) in Physical Review Applied
- Vol. 26 (5)
Optimized permanent-magnet loops and arcs for improved field uniformity
Simple, low-cost, permanent magnet geometries are frequently used for field generation in cases where a constant high-strength magnetic field is required. This is the situation across many emerging quantum platforms, primarily for bias fields in quantum computing or nitrogen-vacancy centers. Finding optimal arrangements of primitive magnet geometries such as these can be difficult, often escalating in complexity, as further higher-order field harmonics are considered. This is further complicated by the need to adhere to strict system constraints, for instance, those implied by geometric or optical access requirements. Here we illustrate a method that encodes loop and arc magnet geometries into an analytical form, attaining solutions for the field harmonics produced by both axial and radial magnetizations for each form. These harmonic descriptions then form the basis of a numerical design procedure. Our approach facilitates solutions that improve fidelity of the target field by reducing error harmonic contributions while satisfying constraints on magnet position. This allows for considerations such as optical access or maximum system extents to be accounted for. To demonstrate this optimization procedure, we produce four system designs: two axially magnetized loops to produce a uniform axial field and two radially magnetized arcs, which, respectively, produce a radial-uniform and radial-gradient field. Their performance is then compared against standard designs, obtained from analytical solutions alone. In each case, when using our approach, the volume of field uniformity within 99% agreement of the target field increases by a minimum factor of 1.37. Designs generated by this procedure therefore enable improved field fidelity and reduce magnetic field-driven errors.
- 16 November 2026
- Published by American Physical Society (APS) in Physical Review Applied
- Vol. 26 (5)
Open AccessOptimized permanent-magnet loops and arcs for improved field uniformity
Simple, low-cost, permanent magnet geometries are frequently used for field generation in cases where a constant high-strength magnetic field is required. This is the situation across many emerging quantum platforms, primarily for bias fields in quantum computing or nitrogen-vacancy centers. Finding optimal arrangements of primitive magnet geometries such as these can be difficult, often escalating in complexity, as further higher-order field harmonics are considered. This is further complicated by the need to adhere to strict system constraints, for instance, those implied by geometric or optical access requirements. Here we illustrate a method that encodes loop and arc magnet geometries into an analytical form, attaining solutions for the field harmonics produced by both axial and radial magnetizations for each form. These harmonic descriptions then form the basis of a numerical design procedure. Our approach facilitates solutions that improve fidelity of the target field by reducing error harmonic contributions while satisfying constraints on magnet position. This allows for considerations such as optical access or maximum system extents to be accounted for. To demonstrate this optimization procedure, we produce four system designs: two axially magnetized loops to produce a uniform axial field and two radially magnetized arcs, which, respectively, produce a radial-uniform and radial-gradient field. Their performance is then compared against standard designs, obtained from analytical solutions alone. In each case, when using our approach, the volume of field uniformity within 99% agreement of the target field increases by a minimum factor of 1.37. Designs generated by this procedure therefore enable improved field fidelity and reduce magnetic field-driven errors.
- Open Access
- 6 September 2024
- Published by American Physical Society (APS) in Physical Review Applied
- Vol. 22 (3) , 034015
Target-field design of surface permanent magnets
We present a target-field approach to analytically design magnetic fields using permanent magnets. We assume that their magnetization is bound to a two-dimensional surface and is composed of a complete basis of surface modes. By posing the Poisson’s equation relating the magnetic scalar potential to the magnetization using Green’s functions, we derive simple integrals that determine the magnetic field generated by each mode. This approach is demonstrated by deriving the governing integrals for optimizing axial magnetization on cylindrical and circular-planar surfaces. We approximate the governing integrals numerically and implement them into a regularized least-squares optimization routine to design permanent magnets that generate uniform axial and transverse target magnetic fields. The resulting uniform axial magnetic field profiles demonstrate more than a tenfold increase in uniformity across equivalent target regions compared to the field generated by an optimally separated axially magnetized pair of rings, as validated using finite element method simulations. We use a simple example to examine how two-dimensional surface magnetization profiles can be emulated using thin three-dimensional volumes and determine how many discrete intervals are required to accurately approximate a continuously varying surface pattern. Magnets designed using our approach may enable higher-quality bias fields for electric machines, nuclear fusion, fundamental physics, magnetic trapping, and beyond. Published by the American Physical Society 2024
- 6 September 2024
- Published by American Physical Society (APS) in Physical Review Applied
- Vol. 22 (3) , 034015
Open AccessTarget-field design of surface permanent magnets
We present a target-field approach to analytically design magnetic fields using permanent magnets. We assume that their magnetization is bound to a two-dimensional surface and is composed of a complete basis of surface modes. By posing the Poisson’s equation relating the magnetic scalar potential to the magnetization using Green’s functions, we derive simple integrals that determine the magnetic field generated by each mode. This approach is demonstrated by deriving the governing integrals for optimizing axial magnetization on cylindrical and circular-planar surfaces. We approximate the governing integrals numerically and implement them into a regularized least-squares optimization routine to design permanent magnets that generate uniform axial and transverse target magnetic fields. The resulting uniform axial magnetic field profiles demonstrate more than a tenfold increase in uniformity across equivalent target regions compared to the field generated by an optimally separated axially magnetized pair of rings, as validated using finite element method simulations. We use a simple example to examine how two-dimensional surface magnetization profiles can be emulated using thin three-dimensional volumes and determine how many discrete intervals are required to accurately approximate a continuously varying surface pattern. Magnets designed using our approach may enable higher-quality bias fields for electric machines, nuclear fusion, fundamental physics, magnetic trapping, and beyond. Published by the American Physical Society 2024
- Open Access
- 10 July 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Instrumentation and Measurement
- Vol. 72 (00189456) , 1-9
Benchtop Magnetic Shielding for Benchmarking Atomic Magnetometers
Here, a benchtop hybrid magnetic shield containing four mumetal cylinders and nine internal flexible printed circuit boards is designed, constructed, tested, and operated. The shield is designed specifically as a test-bed for building and operating ultra-sensitive quantum magnetometers. The geometry and spacing of the mumetal cylinders are optimized to maximize shielding efficiency while maintaining Johnson noise < 15 fT/ √ Hz. Experimental measurements at the shield’s center show passive shielding efficiency of (1.0 ± 0.1)×10 6 for a 0.2 Hz oscillating field applied along the shield’s axis. The nine flexible printed circuit boards generate three uniform fields, which all deviate from perfect uniformity by ≤ 0.5% along 50% of the inner shield axis, and five linear field gradients and one second-order gradient, which all deviate by ≤ 4% from perfect linearity and curvature, respectively, over measured target regions. Together, the target field amplitudes are adjusted to minimize the remnant static field along 40% of the inner shield axis, as mapped using an atomic magnetometer. In this region, the active null reduces the norm of the magnitudes of the three uniform fields and six gradients by factors of 19.5 and 19.8, respectively, thereby reducing the total static field from 1.68 nT to 0.23 nT.
- 10 July 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Instrumentation and Measurement
- Vol. 72 (00189456) , 1-9
Open AccessBenchtop Magnetic Shielding for Benchmarking Atomic Magnetometers
Here, a benchtop hybrid magnetic shield containing four mumetal cylinders and nine internal flexible printed circuit boards is designed, constructed, tested, and operated. The shield is designed specifically as a test-bed for building and operating ultra-sensitive quantum magnetometers. The geometry and spacing of the mumetal cylinders are optimized to maximize shielding efficiency while maintaining Johnson noise < 15 fT/ √ Hz. Experimental measurements at the shield’s center show passive shielding efficiency of (1.0 ± 0.1)×10 6 for a 0.2 Hz oscillating field applied along the shield’s axis. The nine flexible printed circuit boards generate three uniform fields, which all deviate from perfect uniformity by ≤ 0.5% along 50% of the inner shield axis, and five linear field gradients and one second-order gradient, which all deviate by ≤ 4% from perfect linearity and curvature, respectively, over measured target regions. Together, the target field amplitudes are adjusted to minimize the remnant static field along 40% of the inner shield axis, as mapped using an atomic magnetometer. In this region, the active null reduces the norm of the magnitudes of the three uniform fields and six gradients by factors of 19.5 and 19.8, respectively, thereby reducing the total static field from 1.68 nT to 0.23 nT.
- Open Access
- 16 June 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Instrumentation and Measurement
- Vol. 72 (00189456) , 1-15
Designing Optimal Loop, Saddle, and Ellipse-Based Magnetic Coils by Spherical Harmonic Mapping
Adaptable, low-cost, coils designed by carefully selecting the arrangements and geometries of simple primitive units are used to generate magnetic fields for diverse applications. These extend from magnetic resonance and fundamental physics experiments to active shielding of quantum devices including magnetometers, interferometers, clocks, and computers. However, finding optimal arrangements and geometries of multiple primitive structures is time-intensive and it is challenging to account for additional constraints, e.g. optical access, during the design process. Here, we demonstrate a general method to find these optimal arrangements. We encode specific symmetries into sets of loops, saddles, and cylindrical ellipses and then solve exactly for the magnetic field harmonics generated by each set. By combining these analytic solutions using computer algebra, we can use numerical techniques to efficiently map the landscape of parameters and geometries which the coils must satisfy. Sets of solutions may be found which generate desired target fields accurately while accounting for complexity and size restrictions. We demonstrate this approach by employing simple configurations of loops, saddles, and cylindrical ellipses to design target linear field gradients and compare their performance with designs obtained using conventional methods. A case study is presented where three optimized arrangements of loops, designed to generate a uniform axial field, a linear axial field gradient, and a quadratic axial field gradient, respectively, are hand-wound around a low-cost, 3D-printed coil former. These coils are used to null the magnetic background in a typical laboratory environment, reducing the magnitude of the axial field along the central half of the former’s axis from (7.8 ± 0.3) μT (mean ± st. dev.) to (0.11 ± 0.04) μT.
- 16 June 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Instrumentation and Measurement
- Vol. 72 (00189456) , 1-15
Open AccessDesigning Optimal Loop, Saddle, and Ellipse-Based Magnetic Coils by Spherical Harmonic Mapping
Adaptable, low-cost, coils designed by carefully selecting the arrangements and geometries of simple primitive units are used to generate magnetic fields for diverse applications. These extend from magnetic resonance and fundamental physics experiments to active shielding of quantum devices including magnetometers, interferometers, clocks, and computers. However, finding optimal arrangements and geometries of multiple primitive structures is time-intensive and it is challenging to account for additional constraints, e.g. optical access, during the design process. Here, we demonstrate a general method to find these optimal arrangements. We encode specific symmetries into sets of loops, saddles, and cylindrical ellipses and then solve exactly for the magnetic field harmonics generated by each set. By combining these analytic solutions using computer algebra, we can use numerical techniques to efficiently map the landscape of parameters and geometries which the coils must satisfy. Sets of solutions may be found which generate desired target fields accurately while accounting for complexity and size restrictions. We demonstrate this approach by employing simple configurations of loops, saddles, and cylindrical ellipses to design target linear field gradients and compare their performance with designs obtained using conventional methods. A case study is presented where three optimized arrangements of loops, designed to generate a uniform axial field, a linear axial field gradient, and a quadratic axial field gradient, respectively, are hand-wound around a low-cost, 3D-printed coil former. These coils are used to null the magnetic background in a typical laboratory environment, reducing the magnitude of the axial field along the central half of the former’s axis from (7.8 ± 0.3) μT (mean ± st. dev.) to (0.11 ± 0.04) μT.
- Top Cited PapersOpen Access
- 5 May 2023
- Published by Elsevier in NeuroImage
- Vol. 274, 120157
Enabling ambulatory movement in wearable magnetoencephalography with matrix coil active magnetic shielding
- 5 May 2023
- Published by Elsevier in NeuroImage
- Vol. 274, 120157
Top Cited PapersOpen AccessEnabling ambulatory movement in wearable magnetoencephalography with matrix coil active magnetic shielding
- Open Access
- 3 March 2022
- Published by AIP Publishing in Journal of Applied Physics
- Vol. 131 (9) , 093902
Magnetic field design in a cylindrical high-permeability shield: The combination of simple building blocks and a genetic algorithm
Magnetically sensitive experiments and newly developed quantum technologies with integrated high-permeability magnetic shields require increasing control of their magnetic field environment and reductions in size, weight, power, and cost. However, magnetic fields generated by active components are distorted by high-permeability magnetic shielding, particularly when they are close to the shield’s surface. Here, we present an efficient design methodology for creating desired static magnetic field profiles by using discrete coils electromagnetically coupled to a cylindrical passive magnetic shield. We utilize a modified Green’s function solution that accounts for the interior boundary conditions on a closed finite-length high-permeability cylindrical magnetic shield and determine simplified expressions when a cylindrical coil approaches the interior surface of the shield. We use an analytic formulation of simple discrete building blocks to provide a complete discrete coil basis to generate any physically attainable magnetic field inside the shield. We then use a genetic algorithm to find optimized discrete coil structures composed of this basis. We use our methodology to generate an improved linear axial gradient field, , and a transverse bias field, . These optimized structures generate the desired fields with less than error in volumes seven and three times greater in spatial extent than equivalent unoptimized standard configurations. This coil design method can be used to optimize active–passive magnetic field shaping systems that are compact and simple to manufacture, enabling accurate control of magnetic field changes in spatially confined experiments at low cost.- 3 March 2022
- Published by AIP Publishing in Journal of Applied Physics
- Vol. 131 (9) , 093902
Open AccessMagnetic field design in a cylindrical high-permeability shield: The combination of simple building blocks and a genetic algorithm
Magnetically sensitive experiments and newly developed quantum technologies with integrated high-permeability magnetic shields require increasing control of their magnetic field environment and reductions in size, weight, power, and cost. However, magnetic fields generated by active components are distorted by high-permeability magnetic shielding, particularly when they are close to the shield’s surface. Here, we present an efficient design methodology for creating desired static magnetic field profiles by using discrete coils electromagnetically coupled to a cylindrical passive magnetic shield. We utilize a modified Green’s function solution that accounts for the interior boundary conditions on a closed finite-length high-permeability cylindrical magnetic shield and determine simplified expressions when a cylindrical coil approaches the interior surface of the shield. We use an analytic formulation of simple discrete building blocks to provide a complete discrete coil basis to generate any physically attainable magnetic field inside the shield. We then use a genetic algorithm to find optimized discrete coil structures composed of this basis. We use our methodology to generate an improved linear axial gradient field, , and a transverse bias field, . These optimized structures generate the desired fields with less than error in volumes seven and three times greater in spatial extent than equivalent unoptimized standard configurations. This coil design method can be used to optimize active–passive magnetic field shaping systems that are compact and simple to manufacture, enabling accurate control of magnetic field changes in spatially confined experiments at low cost. - 2 June 2021
- Published by American Physical Society (APS) in Physical Review Applied
- Vol. 15 (6) , 064006
Planar Coil Optimization in a Magnetically Shielded Cylinder
Hybrid magnetic shields with both active field generating components and high-permeability magnetic shielding are increasingly needed for various technologies and experiments that require precision-controlled magnetic field environments. However, the fields generated by the active components interact with the passive magnetic shield, distorting the desired field profiles. Consequently, optimization of the active components needed to generate user-specified target fields must include coupling to the high-permeability passive components. Here, we consider the optimization of planar active systems, on which an arbitrary static current flows, coupled to a closed high-permeability cylindrical shield. We modify the Green’s function for the magnetic vector potential to match boundary conditions on the shield’s interior surface, enabling us to construct an inverse optimization problem to design planar coils that generate user-specified magnetic fields inside high-permeability shields. We validate our methodology by designing two biplanar hybrid active-passive systems, which generate a constant transverse field, , and a linear field gradient, , respectively. For both systems, the inverse-optimized magnetic field profiles agree well with forward numerical simulations. Our design methodology is accurate and flexible, facilitating the miniaturization of high-performance hybrid magnetic field generating technologies with strict design constraints and spatial limitations.- 2 June 2021
- Published by American Physical Society (APS) in Physical Review Applied
- Vol. 15 (6) , 064006
Planar Coil Optimization in a Magnetically Shielded Cylinder
Hybrid magnetic shields with both active field generating components and high-permeability magnetic shielding are increasingly needed for various technologies and experiments that require precision-controlled magnetic field environments. However, the fields generated by the active components interact with the passive magnetic shield, distorting the desired field profiles. Consequently, optimization of the active components needed to generate user-specified target fields must include coupling to the high-permeability passive components. Here, we consider the optimization of planar active systems, on which an arbitrary static current flows, coupled to a closed high-permeability cylindrical shield. We modify the Green’s function for the magnetic vector potential to match boundary conditions on the shield’s interior surface, enabling us to construct an inverse optimization problem to design planar coils that generate user-specified magnetic fields inside high-permeability shields. We validate our methodology by designing two biplanar hybrid active-passive systems, which generate a constant transverse field, , and a linear field gradient, , respectively. For both systems, the inverse-optimized magnetic field profiles agree well with forward numerical simulations. Our design methodology is accurate and flexible, facilitating the miniaturization of high-performance hybrid magnetic field generating technologies with strict design constraints and spatial limitations.- 3 November 2020
- Published by American Physical Society (APS) in Physical Review Applied
- Vol. 14 (5) , 054004
Optimal Inverse Design of Magnetic Field Profiles in a Magnetically Shielded Cylinder
Magnetic shields that use both active and passive components to enable the generation of a tailored low-field environment are required for many applications in science, engineering, and medical imaging. Until now, accurate field nulling, or field generation, has only been possible over a small fraction of the overall volume of the shield. This is due to the interaction between the active field-generating components and the surrounding high-permeability passive shielding material. In this paper, we formulate the interaction between an arbitrary static current flow on a cylinder and an exterior closed high-permeability cylinder. We modify the Green’s function for the magnetic vector potential and match boundary conditions on the shield’s interior surface to calculate the total magnetic field generated by the system. We cast this formulation into an inverse optimization problem to design active–passive magnetic field shaping systems that accurately generate any physical static magnetic field in the interior of a closed cylindrical passive shield. We illustrate this method by designing hybrid systems that generate a range of magnetic field profiles to high accuracy over large interior volumes, and simulate them in real-world shields whose passive components have finite permeability, thickness, and axial entry holes. Our optimization procedure can be adapted to design active–passive magnetic field shaping systems that accurately generate any physical user-specified static magnetic field in the interior of a closed cylindrical shield of any length, enabling the development and miniaturization of systems that require accurate magnetic shielding and control.
- 3 November 2020
- Published by American Physical Society (APS) in Physical Review Applied
- Vol. 14 (5) , 054004
Optimal Inverse Design of Magnetic Field Profiles in a Magnetically Shielded Cylinder
Magnetic shields that use both active and passive components to enable the generation of a tailored low-field environment are required for many applications in science, engineering, and medical imaging. Until now, accurate field nulling, or field generation, has only been possible over a small fraction of the overall volume of the shield. This is due to the interaction between the active field-generating components and the surrounding high-permeability passive shielding material. In this paper, we formulate the interaction between an arbitrary static current flow on a cylinder and an exterior closed high-permeability cylinder. We modify the Green’s function for the magnetic vector potential and match boundary conditions on the shield’s interior surface to calculate the total magnetic field generated by the system. We cast this formulation into an inverse optimization problem to design active–passive magnetic field shaping systems that accurately generate any physical static magnetic field in the interior of a closed cylindrical passive shield. We illustrate this method by designing hybrid systems that generate a range of magnetic field profiles to high accuracy over large interior volumes, and simulate them in real-world shields whose passive components have finite permeability, thickness, and axial entry holes. Our optimization procedure can be adapted to design active–passive magnetic field shaping systems that accurately generate any physical user-specified static magnetic field in the interior of a closed cylindrical shield of any length, enabling the development and miniaturization of systems that require accurate magnetic shielding and control.