Nikola Vukelic
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Previous Organizations / Institutes
The organizations / institutes from the scholar's other articles in the past ten years
Nikola Vukelic has a total of 30 co-authors. Here are the top co-authors by number of shared publications:
- Jugoslav Krstić
University of Belgrade, Institute of Chemistry, Technology and Metallurgy, Department of Catalysis and Chemical Engineering, Njegoševa 12, 11000 Belgrade, Serbia
2 shared publications - Vojkan Radonjić
Department of Catalysis and Chemical Engineering, Institute of Chemistry, Technology and Metallurgy, University of Belgrade, Njegoševa 12, 11000 Belgrade, Serbia
2 shared publications - Aleksandra Nesic
University of Belgrade, Vinca Institute of Nuclear Sciences—National Institute of the Republic of Serbia, Belgrade, Serbia
1 shared publication Aleksandra S. Milenković
Vinča Institute of Nuclear Sciences, Belgrade
1 shared publication- Anja Terzić
Institute for Testing of Materials, Bulevar vojvode Mišića 43, 11000 Belgrade, Serbia
1 shared publication - Antonije Onjia
Department of Analytical Chemistry and Quality Control, Faculty of Technology and Metallurgy, University of Belgrade, 11120 Belgrade, Serbia
1 shared publication
Latest Publications
- Open Access
- 1 January 2021
- Published by National Library of Serbia in Science of Sintering
- Vol. 53 (2) , 169-185
Assessment of efficiency of rare earth elements recovery from lignite coal combustion ash via five-stage extraction
Rare earth elements (REE) are frequently referred to as ingredients for enhancements in modern industry, as they are extensively applied in many industrial branches due to their accented electro-magnetic and optical properties. REE have end-utilizations as catalysts, magnets, and as dopants for ceramic materials. Rare earth minerals are scarce therefore the unconventional REE-containing resources such as waste materials and industrial byproducts are continuously being investigated. Coal combustion products comprise REE concentrations varying between 200 ppm and 1500 ppm. This quantity can be isolated though the extraction procedure. In this study, the five stages extraction was conducted on the coal combustion ash from the selected landfill site. The extractions of 32 elements (As, Ga, Ce, Be, Ge, Nd, Cr, Zr, Eu, Cu, Nb, Gd, Co, Mo, Dy, Li, Ag, W, Mn, Cd, Au, Ni, In, Hg, Pb, Sn, Tl, V, Sb, Th, Zn, and La) were conveyed. Chemical analyses were conducted via XRF, ICP-OES, ICP-MS, and AAS techniques. The complexity of the obtained data was examined by Principal component analysis and Cluster analysis in order to derive interconnections between quantity of elements and landfill characteristics, as well as mutual relationships among the elements of interest, and to assess the accomplishment of REE recovery from the coal ash.
- 1 January 2021
- Published by National Library of Serbia in Science of Sintering
- Vol. 53 (2) , 169-185
Open AccessAssessment of efficiency of rare earth elements recovery from lignite coal combustion ash via five-stage extraction
Rare earth elements (REE) are frequently referred to as ingredients for enhancements in modern industry, as they are extensively applied in many industrial branches due to their accented electro-magnetic and optical properties. REE have end-utilizations as catalysts, magnets, and as dopants for ceramic materials. Rare earth minerals are scarce therefore the unconventional REE-containing resources such as waste materials and industrial byproducts are continuously being investigated. Coal combustion products comprise REE concentrations varying between 200 ppm and 1500 ppm. This quantity can be isolated though the extraction procedure. In this study, the five stages extraction was conducted on the coal combustion ash from the selected landfill site. The extractions of 32 elements (As, Ga, Ce, Be, Ge, Nd, Cr, Zr, Eu, Cu, Nb, Gd, Co, Mo, Dy, Li, Ag, W, Mn, Cd, Au, Ni, In, Hg, Pb, Sn, Tl, V, Sb, Th, Zn, and La) were conveyed. Chemical analyses were conducted via XRF, ICP-OES, ICP-MS, and AAS techniques. The complexity of the obtained data was examined by Principal component analysis and Cluster analysis in order to derive interconnections between quantity of elements and landfill characteristics, as well as mutual relationships among the elements of interest, and to assess the accomplishment of REE recovery from the coal ash.
- Open Access
- 1 January 2020
- Published by National Library of Serbia in Journal of the Serbian Chemical Society
- Vol. 85 (10) , 1371-1382
Removal of Fe2+, Zn2+ and Mn2+ ions from the mining wastewater by lemon peel waste
This study is aimed to evaluate the possibility of lemon peel, as an agro-industrial waste, to remove Fe2+, Zn2+ and Mn2+ from single aqueous solutions and mining wastewater. For this purpose, the influence of various parameters: sorption time, initial pH solution, initial metal ion concentration and a dose of sorbent on the sorption process were studied in batch experiments. The experimental equilibrium data have been analysed utilizing linearized forms of Langmuir, Freundlich, Temkin and Dubinin?Radushkevich isotherms. The Langmuir isotherm provided the best theoretical correlation of the experimental equilibrium data for Fe2+, Zn2+ and Mn2+, with the maximum sorption capacities of 4.40, 5.03 and 4.52 mg g-1, respectively. The percentage of targeted ions removal from single aqueous solutions was 92.9 % (Zn2+), 84.5 % (Fe2+) and 78.2 % (Mn2+). Regarding the sorption capability of lemon peel in mining wastewater, the maximum removal of Fe2+, Zn2+ and Mn2+ from mining wastewater was 49.62, 33.97 and 9.11 %, respectively. In addition, the potential reusability of the lemon peel as sorbent was investigated through desorption study in 0.1M of CH3COO4, HCl and HNO3 solution. The highest rate of desorption was achieved in 0.1 M HCl solution, reached a value of 55.19 % for Mn2+ and 37.24 % for Zn2+, while for Fe2+ the highest value of 25.82 % was achieved in 0.1M HNO3 solution.
- 1 January 2020
- Published by National Library of Serbia in Journal of the Serbian Chemical Society
- Vol. 85 (10) , 1371-1382
Open AccessRemoval of Fe2+, Zn2+ and Mn2+ ions from the mining wastewater by lemon peel waste
This study is aimed to evaluate the possibility of lemon peel, as an agro-industrial waste, to remove Fe2+, Zn2+ and Mn2+ from single aqueous solutions and mining wastewater. For this purpose, the influence of various parameters: sorption time, initial pH solution, initial metal ion concentration and a dose of sorbent on the sorption process were studied in batch experiments. The experimental equilibrium data have been analysed utilizing linearized forms of Langmuir, Freundlich, Temkin and Dubinin?Radushkevich isotherms. The Langmuir isotherm provided the best theoretical correlation of the experimental equilibrium data for Fe2+, Zn2+ and Mn2+, with the maximum sorption capacities of 4.40, 5.03 and 4.52 mg g-1, respectively. The percentage of targeted ions removal from single aqueous solutions was 92.9 % (Zn2+), 84.5 % (Fe2+) and 78.2 % (Mn2+). Regarding the sorption capability of lemon peel in mining wastewater, the maximum removal of Fe2+, Zn2+ and Mn2+ from mining wastewater was 49.62, 33.97 and 9.11 %, respectively. In addition, the potential reusability of the lemon peel as sorbent was investigated through desorption study in 0.1M of CH3COO4, HCl and HNO3 solution. The highest rate of desorption was achieved in 0.1 M HCl solution, reached a value of 55.19 % for Mn2+ and 37.24 % for Zn2+, while for Fe2+ the highest value of 25.82 % was achieved in 0.1M HNO3 solution.
- Open Access
- 1 January 2019
- Published by National Library of Serbia in Chemical Industry and Chemical Engineering Quarterly
- Vol. 25 (2) , 193-206
Mg-Ni supported on perlite as hydrogenation catalyst: Influence of Mg and Ni content
Use of broken honeycomb-like expanded perlite as support for magnesium modified nickel catalysts in process of partial hydrogenation of sunflower oil was studied. By the use of the precipitation-deposition method, two groups of precursors were synthesized: different Ni/SiO2 mole ratios with constant Mg/Ni mole ratio 0.1, and different Mg/Ni mole ratios with constant Ni/SiO2 mole ratio 0.25. Characterizations of precursors were done (scanning electron microscopy, diffuse reflectance UV?Vis, infrared spectroscopy, N2-physisorption, temperature programmed reduction (TPR) and He-pycnometry) to determine the material differences, considering the change in morphology, structure, texture and reducibility with overall Ni and Mg content. In addition, TPR and hydrogen chemisorption were performed in order to estimate the temperature reduction range of supported precursors and the dispersion degree of nickel in reduced precursors, respectively. The interaction between Ni2+ and perlite support was established. Different reducibility and dispersion were obtained as a function of Ni/SiO2 and Mg/Ni mole ratios. After the precursor?s reduction and paraffin oil impregnation, the obtained catalysts were tested in a sunflower oil hydrogenation reaction. Catalyst activity was monitored through the decrease of the refractive index and hydrogen consumption that gave the insight that the influence on catalyst activity represents the accessibility of triacylglycerols and not always the hydrogen determined dispersion degree.
- 1 January 2019
- Published by National Library of Serbia in Chemical Industry and Chemical Engineering Quarterly
- Vol. 25 (2) , 193-206
Open AccessMg-Ni supported on perlite as hydrogenation catalyst: Influence of Mg and Ni content
Use of broken honeycomb-like expanded perlite as support for magnesium modified nickel catalysts in process of partial hydrogenation of sunflower oil was studied. By the use of the precipitation-deposition method, two groups of precursors were synthesized: different Ni/SiO2 mole ratios with constant Mg/Ni mole ratio 0.1, and different Mg/Ni mole ratios with constant Ni/SiO2 mole ratio 0.25. Characterizations of precursors were done (scanning electron microscopy, diffuse reflectance UV?Vis, infrared spectroscopy, N2-physisorption, temperature programmed reduction (TPR) and He-pycnometry) to determine the material differences, considering the change in morphology, structure, texture and reducibility with overall Ni and Mg content. In addition, TPR and hydrogen chemisorption were performed in order to estimate the temperature reduction range of supported precursors and the dispersion degree of nickel in reduced precursors, respectively. The interaction between Ni2+ and perlite support was established. Different reducibility and dispersion were obtained as a function of Ni/SiO2 and Mg/Ni mole ratios. After the precursor?s reduction and paraffin oil impregnation, the obtained catalysts were tested in a sunflower oil hydrogenation reaction. Catalyst activity was monitored through the decrease of the refractive index and hydrogen consumption that gave the insight that the influence on catalyst activity represents the accessibility of triacylglycerols and not always the hydrogen determined dispersion degree.
- 15 November 2015
- Published by Pleiades Publishing Ltd in Russian Journal of Physical Chemistry A
- Vol. 89 (13) , 2359-2366
Perlite as a potential support for nickel catalyst in the process of sunflower oil hydrogenation
- 15 November 2015
- Published by Pleiades Publishing Ltd in Russian Journal of Physical Chemistry A
- Vol. 89 (13) , 2359-2366
Perlite as a potential support for nickel catalyst in the process of sunflower oil hydrogenation
- Open Access
- 1 January 2014
- Published by Centre for Evaluation in Education and Science (CEON/CEES) in Tehnika
- Vol. 69 (3) , 367-372
Determination of surface functional groups on mechanochemically activated carbon cloth by Boehm method
In order to improve sorption properties of activated carbon cloth that can be used for wastewater purification, mechanochemical activation was performed in both inert and air atmosphere. Boehm method was used to follow the changes in the number and types of surface groups induced by mechanical milling. The number of the base groups of 0,2493 mmol/g is significantly smaller than the total amount of acidic functional groups, 2,5093 mmol/g. Among the acidic groups present on the surface, the most represented are phenolic groups (2.3846 mmol/g ), ie . > 95 % , the carboxylic groups are present far less (0.1173 mmol /g), ie. 4.5 %, while the presence of the lactone group on the surface of ACC is negligible (0.0074 mmol/g) ie. under 0.3 %. Mechanochemical activation lead to an increase in the number of acidic and basic groups on the surface of the ACC. The milling in inert atmosphere has dominant effect with respect to the changes in the total number of basic functional groups (compared to milling in an air atmosphere): the number of basic groups of the ACC was 0.8153 mmol/g milled under argon, 0.7933 mmol/g in the air; the number of acidic groups is 2.9807 mmol/g for a sample milled under argon and 3.5313 mmol/g for one milled in the air.
- 1 January 2014
- Published by Centre for Evaluation in Education and Science (CEON/CEES) in Tehnika
- Vol. 69 (3) , 367-372
Open AccessDetermination of surface functional groups on mechanochemically activated carbon cloth by Boehm method
In order to improve sorption properties of activated carbon cloth that can be used for wastewater purification, mechanochemical activation was performed in both inert and air atmosphere. Boehm method was used to follow the changes in the number and types of surface groups induced by mechanical milling. The number of the base groups of 0,2493 mmol/g is significantly smaller than the total amount of acidic functional groups, 2,5093 mmol/g. Among the acidic groups present on the surface, the most represented are phenolic groups (2.3846 mmol/g ), ie . > 95 % , the carboxylic groups are present far less (0.1173 mmol /g), ie. 4.5 %, while the presence of the lactone group on the surface of ACC is negligible (0.0074 mmol/g) ie. under 0.3 %. Mechanochemical activation lead to an increase in the number of acidic and basic groups on the surface of the ACC. The milling in inert atmosphere has dominant effect with respect to the changes in the total number of basic functional groups (compared to milling in an air atmosphere): the number of basic groups of the ACC was 0.8153 mmol/g milled under argon, 0.7933 mmol/g in the air; the number of acidic groups is 2.9807 mmol/g for a sample milled under argon and 3.5313 mmol/g for one milled in the air.
- Open Access
- 1 January 2014
- Published by National Library of Serbia in Nuclear Technology and Radiation Protection
- Vol. 29 (1) , 79-87
Immobilization of 60Co and 90Sr ions using red mud from aluminum industry
The removal of 60Co and 90Sr from the aqueous phase was tested using red mud - the fine grained residue from bauxite ore processing. This industrial waste represents a mixture of numerous minerals, mainly oxides and hydroxides of Fe, Al, Si, and Ti. Experiments were conducted as a function of contact time, pH, and pollutant concentrations. Kinetic data were well fitted with a pseudo-second order equation. The calculated rate constants and initial sorption rates indicated faster sorption of Sr2+ ions. Removal of both cations rapidly increased with the initial pH increase from 2.5 to 3.5. With the further increase of pH, Co2+ sorption was nearly constant (98%-100%), whereas Sr2+ removal remained at the same level to initial pH ~8 and gradually increased to 100% at pH 12. Equilibrium sorption data followed the Langmuir model, with the maximum sorption capacities of 0.52 mmol/g for Co2+ and 0.31 mmol/g for Sr2+. Sorbed cations exhibited high stability in distilled water. Desorption of Co2+ was also negligible in the presence of the competing Ca2+ cation, while 42%-25% of Sr2+ ions were desorbed depending on the previously sorbed amount. The results indicate that red mud is of potential significance as Co2+ and Sr2+ immobilization agent due to its high efficiency, abundance, and low-cost.
- 1 January 2014
- Published by National Library of Serbia in Nuclear Technology and Radiation Protection
- Vol. 29 (1) , 79-87
Open AccessImmobilization of 60Co and 90Sr ions using red mud from aluminum industry
The removal of 60Co and 90Sr from the aqueous phase was tested using red mud - the fine grained residue from bauxite ore processing. This industrial waste represents a mixture of numerous minerals, mainly oxides and hydroxides of Fe, Al, Si, and Ti. Experiments were conducted as a function of contact time, pH, and pollutant concentrations. Kinetic data were well fitted with a pseudo-second order equation. The calculated rate constants and initial sorption rates indicated faster sorption of Sr2+ ions. Removal of both cations rapidly increased with the initial pH increase from 2.5 to 3.5. With the further increase of pH, Co2+ sorption was nearly constant (98%-100%), whereas Sr2+ removal remained at the same level to initial pH ~8 and gradually increased to 100% at pH 12. Equilibrium sorption data followed the Langmuir model, with the maximum sorption capacities of 0.52 mmol/g for Co2+ and 0.31 mmol/g for Sr2+. Sorbed cations exhibited high stability in distilled water. Desorption of Co2+ was also negligible in the presence of the competing Ca2+ cation, while 42%-25% of Sr2+ ions were desorbed depending on the previously sorbed amount. The results indicate that red mud is of potential significance as Co2+ and Sr2+ immobilization agent due to its high efficiency, abundance, and low-cost.
- Open Access
- 1 January 2004
- Published by National Library of Serbia in Journal of the Serbian Chemical Society
- Vol. 69 (4) , 309-317
Sorption-spectrophotometric method for the determination of Pd(II) in aqueous solutions
The reaction of Pd(II) with 1,8-dihydroxy-2-(pyrazol-5-ylazo)-naphthalene 3-6-disulphonic acid (PACA) sorbed onto Dowex 1-X8 ion-exchange resin was investigated with the aim of developing an absorption-spectrophotometric analytical method for the determination of low Pd(II) concentrations in water. The immobilized reagent formed a 1:1 complex with Pd(II) having an absorption maximum at 650 nm. Parameters, such as pH, wavelength and contact time were optimised for a given amount of the sorbed reagent. The linearity range of absorbance vs. Pd(II) concentration extended from 5x10-6 ? 5x10-5 M 5x10-7 ? 5x10-6 and 2.5x10-8 ? 2.5x10-7 M when using 10, 100 and 200 ml of sample solution, respectively. With a 200 ml sample, the detection limit was 2.5x10-7 M Pd(II). Most metals, except Cu(II), did not interfere when present in up to 100 times the concentration of Pd(II).
- 1 January 2004
- Published by National Library of Serbia in Journal of the Serbian Chemical Society
- Vol. 69 (4) , 309-317
Open AccessSorption-spectrophotometric method for the determination of Pd(II) in aqueous solutions
The reaction of Pd(II) with 1,8-dihydroxy-2-(pyrazol-5-ylazo)-naphthalene 3-6-disulphonic acid (PACA) sorbed onto Dowex 1-X8 ion-exchange resin was investigated with the aim of developing an absorption-spectrophotometric analytical method for the determination of low Pd(II) concentrations in water. The immobilized reagent formed a 1:1 complex with Pd(II) having an absorption maximum at 650 nm. Parameters, such as pH, wavelength and contact time were optimised for a given amount of the sorbed reagent. The linearity range of absorbance vs. Pd(II) concentration extended from 5x10-6 ? 5x10-5 M 5x10-7 ? 5x10-6 and 2.5x10-8 ? 2.5x10-7 M when using 10, 100 and 200 ml of sample solution, respectively. With a 200 ml sample, the detection limit was 2.5x10-7 M Pd(II). Most metals, except Cu(II), did not interfere when present in up to 100 times the concentration of Pd(II).