Dominik Dworschak
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Previous Organizations / Institutes
The organizations / institutes from the scholar's other articles in the past ten years
Research Subjects
Dominik Dworschak has a total of 100 co-authors. Here are the top co-authors by number of shared publications:
- Karl Johann Jakob Mayrhofer
Department of Chemical and Biological Engineering, Friedrich-Alexander-Universität Erlangen-Nürnberg, Cauerstraße 1, Erlangen, Germany, 91058
12 shared publications - Andreas Hutzler
Helmholtz Institute Erlangen‐Nürnberg for Renewable Energy (IET‐2) Forschungszentrum Jülich GmbH Erlangen Germany
9 shared publications - Simon Thiele
Forschungszentrum Jülich GmbH, HI ERN (IEK-11)
8 shared publications - Lena Fiedler
Helmholtz Institute Erlangen‐Nürnberg for Renewable Energy (IET‐2) Forschungszentrum Jülich GmbH Erlangen Germany
6 shared publications - Birk Fritsch
Helmholtz Institute Erlangen‐Nürnberg for Renewable Energy (IET‐2) Forschungszentrum Jülich GmbH Erlangen Germany
5 shared publications - Gun Deniz Akkoc
Helmholtz Institute for Renewable Energy Erlangen-Nürnberg, Cauerstr. 1, Erlangen, Germany, 91058
5 shared publications
Latest Publications
- Open Access
- 22 October 2026
- Published by Royal Society of Chemistry (RSC) in Journal of Materials Chemistry A
- Vol. 14 (63) , 43862-43872
A scanning flow cell approach for generation of electrocatalyst material libraries via electrodeposition
Automated electrodeposition and activity–stability screening of Au–Pd–Pt nanoparticle libraries for ORR catalysis.
- 22 October 2026
- Published by Royal Society of Chemistry (RSC) in Journal of Materials Chemistry A
- Vol. 14 (63) , 43862-43872
Open AccessA scanning flow cell approach for generation of electrocatalyst material libraries via electrodeposition
Automated electrodeposition and activity–stability screening of Au–Pd–Pt nanoparticle libraries for ORR catalysis.
- Open Access
- 3 September 2026
- Published by Wiley in Small Methods
- Vol. 10 (19) , e71010
Towards High‐Throughput Testing of Bipolar Plate Materials for Proton Exchange Membrane Water Electrolyzers: Correlative Contact Resistance and Stability Analysis
Bipolar plates (BPP) are a major cost driver in proton exchange membrane water electrolyzers for green hydrogen production that require replacement with more cost‐effective materials. However, novel materials must combine high corrosion resistance and low dissolution rates with low interfacial contact resistance (ICR). Herein, we introduce a correlative workflow for determining electrochemical dissolution using a scanning flow cell coupled on‐line to an inductively coupled plasma spectrometer and ICR, utilizing a novel miniaturized ICR setup with a sample diameter of 2 mm. The applicability of the setup is demonstrated using titanium (Ti), for which the ICR is found to increase depending on the applied oxidation potential. Furthermore, automated ICR mapping across pristine Ti sheets with a platinum (Pt) coating featuring a thickness gradient reveals a pronounced ICR decrease when the Pt layer exceeds ∼3.8 ± 1.4 nm Pt , while thicker Pt coatings (up to ∼80 nm Pt ) do not provide further improvement. These results demonstrate that ultrathin Pt coatings can already substantially reduce the ICR of titanium‐based BPP materials. Our setup enables high‐throughput screening of material libraries and provides a powerful tool for developing optimized PEMWE components with low ICR and high electrochemical stability.
- 3 September 2026
- Published by Wiley in Small Methods
- Vol. 10 (19) , e71010
Open AccessTowards High‐Throughput Testing of Bipolar Plate Materials for Proton Exchange Membrane Water Electrolyzers: Correlative Contact Resistance and Stability Analysis
Bipolar plates (BPP) are a major cost driver in proton exchange membrane water electrolyzers for green hydrogen production that require replacement with more cost‐effective materials. However, novel materials must combine high corrosion resistance and low dissolution rates with low interfacial contact resistance (ICR). Herein, we introduce a correlative workflow for determining electrochemical dissolution using a scanning flow cell coupled on‐line to an inductively coupled plasma spectrometer and ICR, utilizing a novel miniaturized ICR setup with a sample diameter of 2 mm. The applicability of the setup is demonstrated using titanium (Ti), for which the ICR is found to increase depending on the applied oxidation potential. Furthermore, automated ICR mapping across pristine Ti sheets with a platinum (Pt) coating featuring a thickness gradient reveals a pronounced ICR decrease when the Pt layer exceeds ∼3.8 ± 1.4 nm Pt , while thicker Pt coatings (up to ∼80 nm Pt ) do not provide further improvement. These results demonstrate that ultrathin Pt coatings can already substantially reduce the ICR of titanium‐based BPP materials. Our setup enables high‐throughput screening of material libraries and provides a powerful tool for developing optimized PEMWE components with low ICR and high electrochemical stability.
- Open Access
- 7 July 2026
- Published by American Chemical Society (ACS) in ChemRxiv
Rapid Evaluation of Glassy Carbon Electrode Surface with Machine Vision
Automation of electrochemical methods is crucial to achieve high-throughput experimentation (HTE) and self-driving laboratories (SDLs) for accelerating chemistry and materials engineering on pressing research challenges. Obtaining reproducible and reliable electrochemical results requires frequent monitoring of the experimental apparatus, particularly the surface condition of the electrodes. Here, a rapid surface evaluation method that combines optical macro imaging with machine learning (ML) is investigated. We demonstrated that the degradation of a glassy-carbon (GC) electrode can be quantified using only an optical image. This approach enables easily automatable, non-intrusive, and rapid monitoring of electrode health without significantly increasing the complexity of the experimental setup, while also providing spatially resolved insights into degradation.
- 7 July 2026
- Published by American Chemical Society (ACS) in ChemRxiv
Open AccessRapid Evaluation of Glassy Carbon Electrode Surface with Machine Vision
Automation of electrochemical methods is crucial to achieve high-throughput experimentation (HTE) and self-driving laboratories (SDLs) for accelerating chemistry and materials engineering on pressing research challenges. Obtaining reproducible and reliable electrochemical results requires frequent monitoring of the experimental apparatus, particularly the surface condition of the electrodes. Here, a rapid surface evaluation method that combines optical macro imaging with machine learning (ML) is investigated. We demonstrated that the degradation of a glassy-carbon (GC) electrode can be quantified using only an optical image. This approach enables easily automatable, non-intrusive, and rapid monitoring of electrode health without significantly increasing the complexity of the experimental setup, while also providing spatially resolved insights into degradation.
- 7 July 2026
- Published by The Electrochemical Society in ECS Meeting Abstracts
- Vol. MA2026-01 (36) , 1747
(Invited) Operando Characterization of Low Temperature Water Electrolysis Catalysts at the ID31 Beamline of the European Synchrotron Radiation Facility
Water electrolysis remains one of the most promising routes for obtaining green hydrogen, yet further improvements of the catalyst materials in terms of performance, cost, and stability must be achieved for large-scale deployment. This is particularly significant for the oxygen evolution reaction (OER), a kinetically sluggish process that requires large overpotentials. Developing insight into the reaction mechanisms, as well as structural alterations of the catalyst throughout prolonged operation is key in order to identify improvements and lead to rational catalyst design.
- 7 July 2026
- Published by The Electrochemical Society in ECS Meeting Abstracts
- Vol. MA2026-01 (36) , 1747
(Invited) Operando Characterization of Low Temperature Water Electrolysis Catalysts at the ID31 Beamline of the European Synchrotron Radiation Facility
Water electrolysis remains one of the most promising routes for obtaining green hydrogen, yet further improvements of the catalyst materials in terms of performance, cost, and stability must be achieved for large-scale deployment. This is particularly significant for the oxygen evolution reaction (OER), a kinetically sluggish process that requires large overpotentials. Developing insight into the reaction mechanisms, as well as structural alterations of the catalyst throughout prolonged operation is key in order to identify improvements and lead to rational catalyst design.
- Open Access
- 8 June 2026
- Published by American Chemical Society (ACS) in ChemRxiv
Towards High-Throughput Testing of Bipolar Plate Materials for Proton Exchange Membrane Water Electrolyzers: Correlative Contact Resistance and Stability Analysis
Bipolar plates (BPP) are a major cost driver in proton exchange membrane water electrolyzers for green hydrogen production that require replacement with more cost-effective materials. However, novel materials must combine high corrosion resistance and low dissolution rates with low interfacial contact resistance (ICR). Herein, we introduce a correlative workflow for determining electrochemical dissolution using a scanning flow cell coupled on-line to inductively coupled plasma spectrometer and ICR at the identical location utilizing a novel miniaturized ICR setup with a sample diameter of 2 mm. The applicability of the setup is demonstrated using titanium (Ti), for which the ICR is found to increase depending on the applied oxidation potential. Furthermore, automated ICR mapping across pristine Ti sheets with a platinum (Pt) coating featuring a thickness gradient reveal a pronounced ICR decrease when the Pt layer exceeds ~3.8 ± 1.4 nm Pt , while thicker Pt coatings (up to ~80 nm Pt ) do not provide further improvement. These results demonstrate that ultrathin Pt coatings can already substantially reduce the ICR of titanium-based BPP materials. Our setup enables high-throughput screening of material libraries and provides a powerful tool for developing optimized PEMWE components with low ICR and high electrochemical stability.
- 8 June 2026
- Published by American Chemical Society (ACS) in ChemRxiv
Open AccessTowards High-Throughput Testing of Bipolar Plate Materials for Proton Exchange Membrane Water Electrolyzers: Correlative Contact Resistance and Stability Analysis
Bipolar plates (BPP) are a major cost driver in proton exchange membrane water electrolyzers for green hydrogen production that require replacement with more cost-effective materials. However, novel materials must combine high corrosion resistance and low dissolution rates with low interfacial contact resistance (ICR). Herein, we introduce a correlative workflow for determining electrochemical dissolution using a scanning flow cell coupled on-line to inductively coupled plasma spectrometer and ICR at the identical location utilizing a novel miniaturized ICR setup with a sample diameter of 2 mm. The applicability of the setup is demonstrated using titanium (Ti), for which the ICR is found to increase depending on the applied oxidation potential. Furthermore, automated ICR mapping across pristine Ti sheets with a platinum (Pt) coating featuring a thickness gradient reveal a pronounced ICR decrease when the Pt layer exceeds ~3.8 ± 1.4 nm Pt , while thicker Pt coatings (up to ~80 nm Pt ) do not provide further improvement. These results demonstrate that ultrathin Pt coatings can already substantially reduce the ICR of titanium-based BPP materials. Our setup enables high-throughput screening of material libraries and provides a powerful tool for developing optimized PEMWE components with low ICR and high electrochemical stability.
- Open Access
- 29 May 2026
- Published by American Chemical Society (ACS) in ChemRxiv
Rapid Evaluation of Glassy Carbon Electrode Surface with Machine Vision
Automation of electrochemical methods is crucial to achieve high-throughput experimentation (HTE) and self-driving laboratories (SDLs) for accelerating chemistry and materials engineering on pressing research challenges. Obtaining reproducible and reliable electrochemical results requires frequent monitoring of the experimental apparatus, particularly the surface condition of the electrodes. Here, a rapid surface evaluation method that combines optical macro imaging with machine learning (ML) is investigated. We demonstrated that the degradation of a glassy-carbon (GC) electrode can be quantified using only an optical image. This approach enables easily automatable, non-intrusive, and rapid monitoring of electrode health without significantly increasing the complexity of the experimental setup, while also providing spatially resolved insights into degradation.
- 29 May 2026
- Published by American Chemical Society (ACS) in ChemRxiv
Open AccessRapid Evaluation of Glassy Carbon Electrode Surface with Machine Vision
Automation of electrochemical methods is crucial to achieve high-throughput experimentation (HTE) and self-driving laboratories (SDLs) for accelerating chemistry and materials engineering on pressing research challenges. Obtaining reproducible and reliable electrochemical results requires frequent monitoring of the experimental apparatus, particularly the surface condition of the electrodes. Here, a rapid surface evaluation method that combines optical macro imaging with machine learning (ML) is investigated. We demonstrated that the degradation of a glassy-carbon (GC) electrode can be quantified using only an optical image. This approach enables easily automatable, non-intrusive, and rapid monitoring of electrode health without significantly increasing the complexity of the experimental setup, while also providing spatially resolved insights into degradation.
- Open Access
- 25 May 2026
- Published by American Chemical Society (ACS) in ChemRxiv
Tracing Dissolved Iridium in Proton Exchange Membrane Water Electrolysis Using Operando Hard-X-Ray Fluorescence
Dissolution of iridium in proton exchange membrane water electrolyzer anodes is a critical challenge on the path towards low-cost and durable water electrolysis. While end-of-test analysis of electrolyzers showed that most of the dissolved catalyst redeposits in the membrane and the cathode catalyst layer, this approach offers only limited insight into the dynamics of iridium dissolution, transport, and redeposition mechanisms. By means of 2D-mapping with synchrotron-based operando X-ray fluorescence (XRF) spectroscopy, we detected dissolved iridium in the membrane electrode assembly (MEA) during electrolysis operation and traced the dynamics of its transport under varied operation conditions with reasonable temporal (20 min per map) and spatial (10 µm) resolution. During electrolysis, we observed an accumulation of dissolved iridium in the cathode catalyst layer. With the toggling flow of dry gas at the cathode, we can distinguish between mobile and redeposited iridium. Though thermodynamically favored, no significant deposition within the cathode was observed after ~1 h of electrolysis. The results obtained are another puzzle piece in the understanding of iridium dissolution in electrolyzers towards its possible mitigation.
- 25 May 2026
- Published by American Chemical Society (ACS) in ChemRxiv
Open AccessTracing Dissolved Iridium in Proton Exchange Membrane Water Electrolysis Using Operando Hard-X-Ray Fluorescence
Dissolution of iridium in proton exchange membrane water electrolyzer anodes is a critical challenge on the path towards low-cost and durable water electrolysis. While end-of-test analysis of electrolyzers showed that most of the dissolved catalyst redeposits in the membrane and the cathode catalyst layer, this approach offers only limited insight into the dynamics of iridium dissolution, transport, and redeposition mechanisms. By means of 2D-mapping with synchrotron-based operando X-ray fluorescence (XRF) spectroscopy, we detected dissolved iridium in the membrane electrode assembly (MEA) during electrolysis operation and traced the dynamics of its transport under varied operation conditions with reasonable temporal (20 min per map) and spatial (10 µm) resolution. During electrolysis, we observed an accumulation of dissolved iridium in the cathode catalyst layer. With the toggling flow of dry gas at the cathode, we can distinguish between mobile and redeposited iridium. Though thermodynamically favored, no significant deposition within the cathode was observed after ~1 h of electrolysis. The results obtained are another puzzle piece in the understanding of iridium dissolution in electrolyzers towards its possible mitigation.
- Open Access
- 1 December 2025
- Published by American Chemical Society (ACS) in Journal of the American Chemical Society
- Vol. 147 (49) , 45230-45239
Active and Stable Layered Alkali Iridates Efficiently Catalyze Oxygen Electroevolution in Low-Ir Proton-Exchange Membrane (PEM) Water Electrolyzers
Developing catalysts with improved activity and stability compared to rutile IrO2 or amorphous IrOx remains a technical priority for advancing the oxygen evolution reaction (OER) in proton-exchange membrane water electrolyzers (PEMWEs). Here, we report structure-OER activity-stability relationships across a family of alkali cation-intercalated iridates, uncovering a structural evolution from hollandite to layered-type structures, characterized by the ratio of edge-sharing to corner-sharing connections of [IrO6] octahedral motifs. In particular, Li-IrOx and Cs-IrOx demonstrate excellent PEMWE performance over a wide current range, pushing Ir demand to new lows. Both achieve a power-specific Ir demand of 0.06 gIr kW-1. However, Cs-IrOx shows a greater potential for long-term stability, indicating that iridates with a higher proportion of edge-sharing motif connections possess enhanced structural robustness. This work offers new insights into balancing catalytic activity and stability through atomic-scale motif connectivity tuning and presents a viable alternative to state-of-the-art rutile or amorphous iridium oxides.
- 1 December 2025
- Published by American Chemical Society (ACS) in Journal of the American Chemical Society
- Vol. 147 (49) , 45230-45239
Open AccessActive and Stable Layered Alkali Iridates Efficiently Catalyze Oxygen Electroevolution in Low-Ir Proton-Exchange Membrane (PEM) Water Electrolyzers
Developing catalysts with improved activity and stability compared to rutile IrO2 or amorphous IrOx remains a technical priority for advancing the oxygen evolution reaction (OER) in proton-exchange membrane water electrolyzers (PEMWEs). Here, we report structure-OER activity-stability relationships across a family of alkali cation-intercalated iridates, uncovering a structural evolution from hollandite to layered-type structures, characterized by the ratio of edge-sharing to corner-sharing connections of [IrO6] octahedral motifs. In particular, Li-IrOx and Cs-IrOx demonstrate excellent PEMWE performance over a wide current range, pushing Ir demand to new lows. Both achieve a power-specific Ir demand of 0.06 gIr kW-1. However, Cs-IrOx shows a greater potential for long-term stability, indicating that iridates with a higher proportion of edge-sharing motif connections possess enhanced structural robustness. This work offers new insights into balancing catalytic activity and stability through atomic-scale motif connectivity tuning and presents a viable alternative to state-of-the-art rutile or amorphous iridium oxides.
- Open Access
- 22 September 2025
- Published by Wiley in ChemSusChem
- Vol. 18 (21) , e202501561
Fluoride‐Induced Corrosion of Stainless Steel: A Case Study for its Application as Proton Exchange Membrane Water Electrolysis Bipolar Plate Material
Stainless steel is a promising material for bipolar plates (BPP) in proton exchange membrane water electrolysis (PEMWE) that could drastically reduce stack costs. However, dissolution of Fe from stainless steel BPP might trigger membrane degradation, which releases fluoride. Fluoride in turn could accelerate stainless steel corrosion. Therefore, the influence of fluoride contamination (namely 0, 1, 5, and 20 ppm in 0.5 mM H 2 SO 4 ) on the dissolution stability of stainless steel (316L) is investigated utilizing a scanning flow cell coupled on‐line to an inductively coupled plasma mass spectrometer (SFC‐ICP‐MS). Fluoride enhances the dissolution exponentially, resulting in enhanced dissolution efficiencies with increased fluoride concentration reaching ≈50% at 20 ppm. Complementary micro and nanostructure analysis (laser profilometry, scanning electron microscopy, and scanning transmission electron microscopy with energy‐dispersive X‐ray spectroscopy) reveals pitting corrosion, whose severity and occurrence appear highly increased with higher fluoride concentration. The results suggest that fluoride impurities in combination with exposed stainless steel, e.g., due to coating imperfections, should be avoided in PEMWE application, as accumulation of impurities of both might lead to a self‐accelerating degradation process.
- 22 September 2025
- Published by Wiley in ChemSusChem
- Vol. 18 (21) , e202501561
Open AccessFluoride‐Induced Corrosion of Stainless Steel: A Case Study for its Application as Proton Exchange Membrane Water Electrolysis Bipolar Plate Material
Stainless steel is a promising material for bipolar plates (BPP) in proton exchange membrane water electrolysis (PEMWE) that could drastically reduce stack costs. However, dissolution of Fe from stainless steel BPP might trigger membrane degradation, which releases fluoride. Fluoride in turn could accelerate stainless steel corrosion. Therefore, the influence of fluoride contamination (namely 0, 1, 5, and 20 ppm in 0.5 mM H 2 SO 4 ) on the dissolution stability of stainless steel (316L) is investigated utilizing a scanning flow cell coupled on‐line to an inductively coupled plasma mass spectrometer (SFC‐ICP‐MS). Fluoride enhances the dissolution exponentially, resulting in enhanced dissolution efficiencies with increased fluoride concentration reaching ≈50% at 20 ppm. Complementary micro and nanostructure analysis (laser profilometry, scanning electron microscopy, and scanning transmission electron microscopy with energy‐dispersive X‐ray spectroscopy) reveals pitting corrosion, whose severity and occurrence appear highly increased with higher fluoride concentration. The results suggest that fluoride impurities in combination with exposed stainless steel, e.g., due to coating imperfections, should be avoided in PEMWE application, as accumulation of impurities of both might lead to a self‐accelerating degradation process.