Soheil Kavian
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Soheil Kavian has a total of 30 co-authors. Here are the top co-authors by number of shared publications:
Cyrus Aghanajafi
4 shared publicationsHassan Jafari Mosleh
Department of Mechanical Engineering Sharif University of Technology Tehran Iran
4 shared publications- Mohsen Saffari Pour
Department of Mechanical Engineering, School of Engineering, Shahid Bahonar University of Kerman, Kerman, Iran
3 shared publications Arash Nazari
2 shared publications- Matthew. J. Powell-Palm
Texas A&M University
2 shared publications - Mohammad Hossein Ahmadi
Shahrood University of Technology
2 shared publications
Latest Publications
- Open Access
- 23 February 2026
- Published by AIP Publishing in The Journal of Chemical Physics
- Vol. 164 (8)
A large-scale dataset and physics-informed neural network for viscosity prediction in many-component aqueous and organic solutions
Modern industrial liquids—including coolants, lubricants, solvent blends, cryoprotectant cocktails, etc.—frequently employ complex, many-component formulations, but contemporary viscosity models and datasets are overwhelmingly limited to simplified binary or ternary compositions, leaving the most application-relevant compositional spaces broadly unexplored. This gap is attributable both to the limitations of classical viscosity correlations, which typically require either untenably idealized interaction assumptions or an untenably larger number of interaction parameters, and to the lack of systematic many-component viscosity datasets. Here, we provide a first-of-its-kind dataset of 44 316 viscosity measurements spanning 100 aqueous and organic solutions of up to 17-component complexity across temperatures from −20 to 35 °C, and we use it to power a physics-informed neural network (PINN) model that provides unprecedented predictive power and physical insight into many-component solution viscosity. We first show that predictive implementations of two prominent classical models (Katti–Chaudhuri and augmented Adam–Gibbs) systematically fail to describe these solutions but retain valuable trend-level information. We then use these models as physical guides for our PINN, embedding classical model insight as a training aid while machine learning the residual non-ideal contributions that dominate in many-component composition space. The resulting model, which we also provide as a software application, maintains stable performance across solution complexity, outperforming both classical correlations and data-only artificial neural networks on fully withheld test data. Finally, we compare residuals of both the classical and PINN models as a function of component number and entropy of mixing, suggesting that entropic phenomena unaccounted for in classical models may dominate the viscosity of many-component solutions.
- 23 February 2026
- Published by AIP Publishing in The Journal of Chemical Physics
- Vol. 164 (8)
Open AccessA large-scale dataset and physics-informed neural network for viscosity prediction in many-component aqueous and organic solutions
Modern industrial liquids—including coolants, lubricants, solvent blends, cryoprotectant cocktails, etc.—frequently employ complex, many-component formulations, but contemporary viscosity models and datasets are overwhelmingly limited to simplified binary or ternary compositions, leaving the most application-relevant compositional spaces broadly unexplored. This gap is attributable both to the limitations of classical viscosity correlations, which typically require either untenably idealized interaction assumptions or an untenably larger number of interaction parameters, and to the lack of systematic many-component viscosity datasets. Here, we provide a first-of-its-kind dataset of 44 316 viscosity measurements spanning 100 aqueous and organic solutions of up to 17-component complexity across temperatures from −20 to 35 °C, and we use it to power a physics-informed neural network (PINN) model that provides unprecedented predictive power and physical insight into many-component solution viscosity. We first show that predictive implementations of two prominent classical models (Katti–Chaudhuri and augmented Adam–Gibbs) systematically fail to describe these solutions but retain valuable trend-level information. We then use these models as physical guides for our PINN, embedding classical model insight as a training aid while machine learning the residual non-ideal contributions that dominate in many-component composition space. The resulting model, which we also provide as a software application, maintains stable performance across solution complexity, outperforming both classical correlations and data-only artificial neural networks on fully withheld test data. Finally, we compare residuals of both the classical and PINN models as a function of component number and entropy of mixing, suggesting that entropic phenomena unaccounted for in classical models may dominate the viscosity of many-component solutions.
- Open Access
- 29 October 2024
- Published by Royal Society of Chemistry (RSC) in RSC Advances
- Vol. 14 (47) , 34594-34605
An isochoric optical platform for interrogation of aqueous glass formation processes
Aqueous vitrification (glass formation) processes are integral to modern cryopreservation, but experimental methods by which to study them are limited, particularly at the mL volume scales relevant to many biomedical applications. Here, we introduce an inexpensive custom optical platform, the isochoric vitrification cryo-macroscope (or “isovitriscope”), to supplement standard techniques with new qualitative and quantitative data streams. The platform consists of an LED light source, a isochoric (constant-volume) chamber with sapphire optical windows, and a camera, which can operate in two modes. One mode enables sharp visual observation of the glass transition and other low-temperature physical processes, including cracking, annealing, ice and hydrate crystallization, cavity formation, melting, etc. The other mode enables tracking of the optical temperature-evolution of the system via recorded light intensity, which we demonstrate may be used to measure the onset glass transition temperature with accuracy similar to differential scanning calorimetry (DSC), and to identify the temperature coordinates of other phase change events. The isovitriscope thus offers a single device combining the phenomenological insight of conventional visual inspection with the quantitative insight of techniques like calorimetry, at the >1 mL volume scales increasingly relevant to cryopreservation applications. To demonstrate uses of the isochoric optical platform, we herein conduct a series of observational studies examining the rich multi-phase phenomena at play during isochoric vitrification of binary cryoprotectant solutions; the effect of surface wettabilities on crack formation in the glassy state; the analogy between differential calorimetric and optical analysis; and more. In summary, the isochoric vitrification cryo-macroscope, or isovitriscope, adds a valuable new tool for the study of aqueous vitrification processes.
- 29 October 2024
- Published by Royal Society of Chemistry (RSC) in RSC Advances
- Vol. 14 (47) , 34594-34605
Open AccessAn isochoric optical platform for interrogation of aqueous glass formation processes
Aqueous vitrification (glass formation) processes are integral to modern cryopreservation, but experimental methods by which to study them are limited, particularly at the mL volume scales relevant to many biomedical applications. Here, we introduce an inexpensive custom optical platform, the isochoric vitrification cryo-macroscope (or “isovitriscope”), to supplement standard techniques with new qualitative and quantitative data streams. The platform consists of an LED light source, a isochoric (constant-volume) chamber with sapphire optical windows, and a camera, which can operate in two modes. One mode enables sharp visual observation of the glass transition and other low-temperature physical processes, including cracking, annealing, ice and hydrate crystallization, cavity formation, melting, etc. The other mode enables tracking of the optical temperature-evolution of the system via recorded light intensity, which we demonstrate may be used to measure the onset glass transition temperature with accuracy similar to differential scanning calorimetry (DSC), and to identify the temperature coordinates of other phase change events. The isovitriscope thus offers a single device combining the phenomenological insight of conventional visual inspection with the quantitative insight of techniques like calorimetry, at the >1 mL volume scales increasingly relevant to cryopreservation applications. To demonstrate uses of the isochoric optical platform, we herein conduct a series of observational studies examining the rich multi-phase phenomena at play during isochoric vitrification of binary cryoprotectant solutions; the effect of surface wettabilities on crack formation in the glassy state; the analogy between differential calorimetric and optical analysis; and more. In summary, the isochoric vitrification cryo-macroscope, or isovitriscope, adds a valuable new tool for the study of aqueous vitrification processes.
- 18 February 2021
- Published by Wiley in International Journal of Energy Research
- Vol. 45 (7) , 10425-10449
Evaluation of a cooling system integrated with different phase change material s and its effect on peak load shaving
- 18 February 2021
- Published by Wiley in International Journal of Energy Research
- Vol. 45 (7) , 10425-10449
Evaluation of a cooling system integrated with different phase change material s and its effect on peak load shaving
- Open Access
- 22 December 2020
- Published by Wiley in Energy Science & Engineering
- Vol. 9 (5) , 724-742
A comprehensive comparative investigation on solar heating and cooling technologies from a thermo‐economic viewpoint—A dynamic simulation
The yearly thermo‐economic performance is dynamically investigated for three solar heating and cooling systems: solar heating and absorption cooling (SHAC), solar heating and ejector cooling (SHEC), and heating and solar vapor compression cooling (HSVC). First, the effects of important design parameters on the thermo‐economic performance of the systems to supply the heating and cooling loads of the building are evaluated. The systems are parametrically analyzed with the weather conditions of Tehran, Iran. The results show that the life cycle costs (LCC) of the SHAC and HSVC systems are alike and much lower than those of the SHEC system. The HSVC system exhibits the best performance from exergetic and solar fraction viewpoints. The comparative analysis shows that the energy efficiencies of the SHAC and SHEC systems are higher in colder climatic conditions. However, the collector efficiency of the HSVC system declines in colder climates, mainly due to the lower solar intensities relative to in hotter climates. Further, the solar fraction of the SHAC system is higher than the SHEC technology under all climatic conditions. Moreover, higher values of solar fractions are obtained under colder weather conditions for the SHEC and HSVC systems. The best economic performance is observed for the SHAC and HSVC technologies, having significantly lower LCCs than the SHEC system. These lower LCCs under colder climatic conditions are due to the lower cost of supplying the heating load compared to the cooling load. Furthermore, all systems exhibit enhanced exergetic performance in colder weather conditions. The yearly thermo‐economic performance is dynamically investigated for three solar heating and cooling systems: SHAC, SHEC, and HSVC. In addition, the effects of important design parameters on the thermo‐economic performance of the systems to supply the heating and cooling loads of the building are evaluated.
- 22 December 2020
- Published by Wiley in Energy Science & Engineering
- Vol. 9 (5) , 724-742
Open AccessA comprehensive comparative investigation on solar heating and cooling technologies from a thermo‐economic viewpoint—A dynamic simulation
The yearly thermo‐economic performance is dynamically investigated for three solar heating and cooling systems: solar heating and absorption cooling (SHAC), solar heating and ejector cooling (SHEC), and heating and solar vapor compression cooling (HSVC). First, the effects of important design parameters on the thermo‐economic performance of the systems to supply the heating and cooling loads of the building are evaluated. The systems are parametrically analyzed with the weather conditions of Tehran, Iran. The results show that the life cycle costs (LCC) of the SHAC and HSVC systems are alike and much lower than those of the SHEC system. The HSVC system exhibits the best performance from exergetic and solar fraction viewpoints. The comparative analysis shows that the energy efficiencies of the SHAC and SHEC systems are higher in colder climatic conditions. However, the collector efficiency of the HSVC system declines in colder climates, mainly due to the lower solar intensities relative to in hotter climates. Further, the solar fraction of the SHAC system is higher than the SHEC technology under all climatic conditions. Moreover, higher values of solar fractions are obtained under colder weather conditions for the SHEC and HSVC systems. The best economic performance is observed for the SHAC and HSVC technologies, having significantly lower LCCs than the SHEC system. These lower LCCs under colder climatic conditions are due to the lower cost of supplying the heating load compared to the cooling load. Furthermore, all systems exhibit enhanced exergetic performance in colder weather conditions. The yearly thermo‐economic performance is dynamically investigated for three solar heating and cooling systems: SHAC, SHEC, and HSVC. In addition, the effects of important design parameters on the thermo‐economic performance of the systems to supply the heating and cooling loads of the building are evaluated.
- 1 October 2020
- Published by Elsevier in Applied Energy
- Vol. 276
Exergy, economic and environmental evaluation of an optimized hybrid photovoltaic-geothermal heat pump system
- 1 October 2020
- Published by Elsevier in Applied Energy
- Vol. 276
Exergy, economic and environmental evaluation of an optimized hybrid photovoltaic-geothermal heat pump system
- Open Access
- 25 September 2020
- Published by Wiley in Energy Science & Engineering
- Vol. 8 (11) , 4136-4153
Novel analysis of second law and irreversibility for a solar power plant using heliostat field and molten salt
Nowadays, the low efficiency of solar energy power plant systems brings about uneconomical performance and high‐cost uncompetitive industries compared with the traditional fossil fuel ones. In order to overcome these kinds of issues, in this study, the performance of a solar tower coupled with a Rankine cycle is scrutinized using the first and second laws of thermodynamic. Moreover, a numerical code has been developed in the GNU Octave software environment to calculate the precise value for both energy and exergy losses of each component. Furthermore, the sensitivity analysis approach corresponds to the variation of several inner parameters such as direct normal irradiation (DNI), molten salt outlet temperature (MSOT), and the molten salt velocity (MSV), environmental parameters such as wind speed and ambient temperature have been performed. In addition, the overall losses are calculated by considering all possible forms of losses such as convection, conduction, reflection, and emission, and also, the portion of each source of these losses are determined. The obtained results indicate that the maximum exergy loss occurs in the central receiver system (CRS), while the major energy loss occurs in the turbine located in the power block. The sensitivity analysis shows that the rise of DNI significantly increases the exergy%energy efficiency of the cycle and also, the portion of loss related to emission heat transfer would be enhanced. Moreover, the variation of the MSV and MSOT illustrate influencing the performance of the cycle; consequently, the MSOT changes demonstrate a reverse relation with energy and direct relation with exergy efficiency. Accordingly, an optimum value of 650K is calculated for the MSOT as well as an optimum value of 2 m%s for the MSV. The environmental sensitivity analysis indicates that the enhancement of wind speed and ambient temperature has a negative impact on the net output of the cycle, which is not desirable.
- 25 September 2020
- Published by Wiley in Energy Science & Engineering
- Vol. 8 (11) , 4136-4153
Open AccessNovel analysis of second law and irreversibility for a solar power plant using heliostat field and molten salt
Nowadays, the low efficiency of solar energy power plant systems brings about uneconomical performance and high‐cost uncompetitive industries compared with the traditional fossil fuel ones. In order to overcome these kinds of issues, in this study, the performance of a solar tower coupled with a Rankine cycle is scrutinized using the first and second laws of thermodynamic. Moreover, a numerical code has been developed in the GNU Octave software environment to calculate the precise value for both energy and exergy losses of each component. Furthermore, the sensitivity analysis approach corresponds to the variation of several inner parameters such as direct normal irradiation (DNI), molten salt outlet temperature (MSOT), and the molten salt velocity (MSV), environmental parameters such as wind speed and ambient temperature have been performed. In addition, the overall losses are calculated by considering all possible forms of losses such as convection, conduction, reflection, and emission, and also, the portion of each source of these losses are determined. The obtained results indicate that the maximum exergy loss occurs in the central receiver system (CRS), while the major energy loss occurs in the turbine located in the power block. The sensitivity analysis shows that the rise of DNI significantly increases the exergy%energy efficiency of the cycle and also, the portion of loss related to emission heat transfer would be enhanced. Moreover, the variation of the MSV and MSOT illustrate influencing the performance of the cycle; consequently, the MSOT changes demonstrate a reverse relation with energy and direct relation with exergy efficiency. Accordingly, an optimum value of 650K is calculated for the MSOT as well as an optimum value of 2 m%s for the MSV. The environmental sensitivity analysis indicates that the enhancement of wind speed and ambient temperature has a negative impact on the net output of the cycle, which is not desirable.
- Open Access
Numerical Investigation of a Portable Incinerator: A Parametric Study
The application of incinerators for the municipal solid waste (MSW) is growing due to the ability of such instruments to produce energy and, more specifically, reduce waste volume. In this paper, a numerical simulation of the combustion process with the help of the computational fluid dynamics (CFD) inside a portable (mobile) incinerator has been proposed. Such work is done to investigate the most critical parameters for a reliable design of a domestic portable incinerator, which is suitable for the Iranian food and waste culture. An old design of a simple incinerator has been used to apply the natural gas (NG), one of the available cheap fossil fuels in Iran. After that, the waste height, place of the primary burner, and the flow rate of the cooling air inside the incinerator, as the main parameters of the design, are investigated. A validation is also performed for the mesh quality test and the occurrence of the chemical reactions near the burner of the incinerator. Results proved that the numerical results have less than 5% error compared to the previous experimental and numerical approaches. In addition, results show that by moving the primary burner into the secondary chamber of the incinerator, the temperature and the heating ability of the incinerator could be affected dramatically. Moreover, it has been found that by increasing the flow rate of the cooling air inside the incinerator to some extent, the combustion process is improved and, on the other hand, by introducing more cooling air, the evacuation of the hazardous gases from the exhaust is also improved.
Open AccessNumerical Investigation of a Portable Incinerator: A Parametric Study
The application of incinerators for the municipal solid waste (MSW) is growing due to the ability of such instruments to produce energy and, more specifically, reduce waste volume. In this paper, a numerical simulation of the combustion process with the help of the computational fluid dynamics (CFD) inside a portable (mobile) incinerator has been proposed. Such work is done to investigate the most critical parameters for a reliable design of a domestic portable incinerator, which is suitable for the Iranian food and waste culture. An old design of a simple incinerator has been used to apply the natural gas (NG), one of the available cheap fossil fuels in Iran. After that, the waste height, place of the primary burner, and the flow rate of the cooling air inside the incinerator, as the main parameters of the design, are investigated. A validation is also performed for the mesh quality test and the occurrence of the chemical reactions near the burner of the incinerator. Results proved that the numerical results have less than 5% error compared to the previous experimental and numerical approaches. In addition, results show that by moving the primary burner into the secondary chamber of the incinerator, the temperature and the heating ability of the incinerator could be affected dramatically. Moreover, it has been found that by increasing the flow rate of the cooling air inside the incinerator to some extent, the combustion process is improved and, on the other hand, by introducing more cooling air, the evacuation of the hazardous gases from the exhaust is also improved.
- Open Access
- 17 June 2020
- Published by Wiley in Energy Science & Engineering
- Vol. 8 (10) , 3575-3587
Nonisothermal two‐phase modeling of the effect of linear nonuniform catalyst layer on polymer electrolyte membrane fuel cell performance
In this research, it is investigated to numerically evaluate the performance of a polymer electrolyte membrane fuel cell (PEMFC). The performance is investigated through the nonuniformity gradient loading at the catalyst layer (CL) of the considered PEMFC. Computational fluid dynamics is used to simulate a 2D domain in which a steady‐state laminar compressible flow in two‐phase for the PEMFC has been considered. In this case, a particular nonuniform variation inside the CL along the channel is assumed. The nonuniform gradient is created using a nonisothermal domain to predict the flooding effects on the performance of the PEMFC. The computational domain is considered as the cathode of PEMFC, which is divided into three regions: a gas channel, a gas diffusion layer, and a CL. The loading variation inside the catalyst is defined as a constant slope along the channel. In order to find the optimum slope, different slope angles are analyzed. The results point out that the nonuniform loading distribution of the catalyst (platinum) along the channel could improve the fuel cell performance up to 1.6% and 5% for power density and voltage generation, respectively. It is inferred that it is better to use more catalyst in the final section of the channel if the performance is the main concern.
- 17 June 2020
- Published by Wiley in Energy Science & Engineering
- Vol. 8 (10) , 3575-3587
Open AccessNonisothermal two‐phase modeling of the effect of linear nonuniform catalyst layer on polymer electrolyte membrane fuel cell performance
In this research, it is investigated to numerically evaluate the performance of a polymer electrolyte membrane fuel cell (PEMFC). The performance is investigated through the nonuniformity gradient loading at the catalyst layer (CL) of the considered PEMFC. Computational fluid dynamics is used to simulate a 2D domain in which a steady‐state laminar compressible flow in two‐phase for the PEMFC has been considered. In this case, a particular nonuniform variation inside the CL along the channel is assumed. The nonuniform gradient is created using a nonisothermal domain to predict the flooding effects on the performance of the PEMFC. The computational domain is considered as the cathode of PEMFC, which is divided into three regions: a gas channel, a gas diffusion layer, and a CL. The loading variation inside the catalyst is defined as a constant slope along the channel. In order to find the optimum slope, different slope angles are analyzed. The results point out that the nonuniform loading distribution of the catalyst (platinum) along the channel could improve the fuel cell performance up to 1.6% and 5% for power density and voltage generation, respectively. It is inferred that it is better to use more catalyst in the final section of the channel if the performance is the main concern.
- 12 June 2020
- Published by Wiley in Journal of Energy Resources Technology
- Vol. 142 (10)
Lithium-Ion Batteries’ Energy Efficiency Prediction Using Physics-Based and State-of-the-Art Artificial Neural Network-Based Models
The new generation of lithium-ion batteries (LIBs) possesses considerable energy density that arise the safety concern much more than before. One of the main issues associated with LIB safety is the heat generation and thermal runaway in LIBs. The importance of characterizing the heat generation in LIBs is reflected in numerous studies. The heat generation in LIBs can be related to energy efficiency as well. In this work, the heat generation in LIB is predicted using two different approaches (physics-based and machine learning-based approaches). A validated multiphysics-based and neural network-based models for commercial LIBs with lithium iron phosphate/graphite (LFP/G), lithium manganese oxide/graphite (LMO/G), and lithium cobalt oxide/graphite (LCO/G) electrodes are used to predict the heat generation toward shaping the LIB energy efficiency contours, illustrating the effect of the nominal capacity as a key parameter in the manufacturing process of the LIBs. The developed contours can provide the energy systems designers a comprehensive view over the accurate efficiency of LIBs when they need to incorporate LIBs into their devices. In addition, the effect of temperature on charge/discharge energy efficiency of LFP/graphite LIBs is obtained, and the performance of three typical LIBs in the market at a very low temperature is compared, which have a wide range of applications from consumer applications such as electric vehicles (EVs) to industrial applications such as uninterruptible power sources (UPSes).
- 12 June 2020
- Published by Wiley in Journal of Energy Resources Technology
- Vol. 142 (10)
Lithium-Ion Batteries’ Energy Efficiency Prediction Using Physics-Based and State-of-the-Art Artificial Neural Network-Based Models
The new generation of lithium-ion batteries (LIBs) possesses considerable energy density that arise the safety concern much more than before. One of the main issues associated with LIB safety is the heat generation and thermal runaway in LIBs. The importance of characterizing the heat generation in LIBs is reflected in numerous studies. The heat generation in LIBs can be related to energy efficiency as well. In this work, the heat generation in LIB is predicted using two different approaches (physics-based and machine learning-based approaches). A validated multiphysics-based and neural network-based models for commercial LIBs with lithium iron phosphate/graphite (LFP/G), lithium manganese oxide/graphite (LMO/G), and lithium cobalt oxide/graphite (LCO/G) electrodes are used to predict the heat generation toward shaping the LIB energy efficiency contours, illustrating the effect of the nominal capacity as a key parameter in the manufacturing process of the LIBs. The developed contours can provide the energy systems designers a comprehensive view over the accurate efficiency of LIBs when they need to incorporate LIBs into their devices. In addition, the effect of temperature on charge/discharge energy efficiency of LFP/graphite LIBs is obtained, and the performance of three typical LIBs in the market at a very low temperature is compared, which have a wide range of applications from consumer applications such as electric vehicles (EVs) to industrial applications such as uninterruptible power sources (UPSes).