Fernando Ribeiro Oliveira
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Previous Organizations / Institutes
The organizations / institutes from the scholar's other articles in the past ten years
Research Subjects
Research Interests
Fernando Ribeiro Oliveira has a total of 153 co-authors. Here are the top co-authors by number of shared publications:
- António Pedro Souto
University of Minho
16 shared publications - Fernanda Steffens
Textile Engineering Department, Federal University of Santa Catarina, Blumenau, Brazil
11 shared publications - Andrea Zille
Centre for Textile Science and Technology (2C2T), University of Minho, Guimarães, Portugal
10 shared publications - Jose Heriberto Oliveira Nascimento
Federal University of Rio Grande do Norte
7 shared publications - Jose Ivan Medeiros
Textile Engineering Post Graduation Program (PPGET), Federal University of Rio Grande do Norte, Natal, Rio Grande do Norte, Brazil
4 shared publications Noémia Carneiro
†Centro de Ciência e Tecnologia Têxtil (2C2T), Universidade do Minho, Campus de Azurém, 4800-058 Guimarães, Portugal
4 shared publications
Latest Publications
- 31 January 2022
- Published by Springer Nature in Revista Brasileira de Farmacognosia
- Vol. 32 (1) , 86-98
Natural and artificial knitted fabrics functionalized with Cordia curassavica accelerate excisional wound healing in mice
- 31 January 2022
- Published by Springer Nature in Revista Brasileira de Farmacognosia
- Vol. 32 (1) , 86-98
Natural and artificial knitted fabrics functionalized with Cordia curassavica accelerate excisional wound healing in mice
- 1 March 2021
- Published by The Academic Society in The Academic Society Journal
- p. 29-44
Estimativa de benefícios na implementação de projeto de automação da etiquetagem de embalagens na indústria têxtil
A indústria têxtil e confecção tem se caracterizado como intensivas em mão de obra, entretanto os processos de automação vêm ganhando espaço nestes ambientes industriais. Um processo como o de etiquetagem no setor de embalagem industrial, quando realizado manualmente, está sujeito a erros e desperdícios indesejáveis, porém, este processo manual ainda é realidade em muitas indústrias têxteis e de confecção no Brasil. Neste trabalho é apresentado um modelo de automação para o processo de etiquetagem no setor de embalagem da indústria têxtil e confecção, sustentado por princípios da teoria de mecanismos, sistemas de automação, gerenciamento de pessoas, tempo de ciclo de operação e análise financeira. Os resultados teóricos previstos, após a implementação do modelo de automação, indicam uma redução no tempo de ciclo do processo de aproximadamente 14,3%, com investimento que se pagará em cerca de 5,8 anos. A implementação de mecanismos de automação possibilita, neste caso, a otimização e melhoria dos processos na indústria têxtil e confecção em termos de agilidade, precisão e redução de custo.
- 1 March 2021
- Published by The Academic Society in The Academic Society Journal
- p. 29-44
Estimativa de benefícios na implementação de projeto de automação da etiquetagem de embalagens na indústria têxtil
A indústria têxtil e confecção tem se caracterizado como intensivas em mão de obra, entretanto os processos de automação vêm ganhando espaço nestes ambientes industriais. Um processo como o de etiquetagem no setor de embalagem industrial, quando realizado manualmente, está sujeito a erros e desperdícios indesejáveis, porém, este processo manual ainda é realidade em muitas indústrias têxteis e de confecção no Brasil. Neste trabalho é apresentado um modelo de automação para o processo de etiquetagem no setor de embalagem da indústria têxtil e confecção, sustentado por princípios da teoria de mecanismos, sistemas de automação, gerenciamento de pessoas, tempo de ciclo de operação e análise financeira. Os resultados teóricos previstos, após a implementação do modelo de automação, indicam uma redução no tempo de ciclo do processo de aproximadamente 14,3%, com investimento que se pagará em cerca de 5,8 anos. A implementação de mecanismos de automação possibilita, neste caso, a otimização e melhoria dos processos na indústria têxtil e confecção em termos de agilidade, precisão e redução de custo.
- 1 January 2021
- Published by Editora Conhecimento Livre
PERFIL DOS INGRESSANTES DOS CURSOS DE ENGENHARIA TÊXTIL DE UNIVERSIDADES FEDERAIS
- 1 January 2021
- Published by Editora Conhecimento Livre
PERFIL DOS INGRESSANTES DOS CURSOS DE ENGENHARIA TÊXTIL DE UNIVERSIDADES FEDERAIS
- 11 November 2020
- Published by SAGE Publications in Textile Research Journal
- Vol. 91 (9-10) , 1184-1193
Seawater as an alternative to dye cotton fiber with reactive dyes
The textile industry is a sector completely dependent on water for its full functioning; on the other hand, water represents a very high cost in the production process. The textile chemical processing area is mainly responsible for the large consumption of water. On the opposite side of this high consumption there is an evident water crisis worldwide. That fact has led to many problems to textile companies, mainly for the preparation, dyeing and printing sectors. This present work focuses on an ecologically friendly alternative for cellulosic fiber dyeing processes using seawater. Dyeing cotton fabrics with reactive dye in three primary colors (blue, yellow and red) was performed, and the results compared with processes using distilled water. Samples dyed with seawater exhibit good uniformity, intense color (color strength – K/S) and excellent washing and rubbing fastness properties compared to the conventional process. It was possible to observe also that the use of seawater did not affect the mechanical properties of the substrate. Thereby, it was verified that the use of seawater presents as a potential and important alternative to applications in the textile dyeing process.
- 11 November 2020
- Published by SAGE Publications in Textile Research Journal
- Vol. 91 (9-10) , 1184-1193
Seawater as an alternative to dye cotton fiber with reactive dyes
The textile industry is a sector completely dependent on water for its full functioning; on the other hand, water represents a very high cost in the production process. The textile chemical processing area is mainly responsible for the large consumption of water. On the opposite side of this high consumption there is an evident water crisis worldwide. That fact has led to many problems to textile companies, mainly for the preparation, dyeing and printing sectors. This present work focuses on an ecologically friendly alternative for cellulosic fiber dyeing processes using seawater. Dyeing cotton fabrics with reactive dye in three primary colors (blue, yellow and red) was performed, and the results compared with processes using distilled water. Samples dyed with seawater exhibit good uniformity, intense color (color strength – K/S) and excellent washing and rubbing fastness properties compared to the conventional process. It was possible to observe also that the use of seawater did not affect the mechanical properties of the substrate. Thereby, it was verified that the use of seawater presents as a potential and important alternative to applications in the textile dyeing process.
- Open Access
- 1 May 2020
- Published by Elsevier in Journal of Materials Research and Technology
- Vol. 9 (3) , 3330-3339
Statistical study of performance properties to impact of Kevlar® woven impregnated with Non-Newtonian Fluid (NNF)
- 1 May 2020
- Published by Elsevier in Journal of Materials Research and Technology
- Vol. 9 (3) , 3330-3339
Open AccessStatistical study of performance properties to impact of Kevlar® woven impregnated with Non-Newtonian Fluid (NNF)
- 7 April 2020
- Published by SAGE Publications in Journal of Composite Materials
- Vol. 54 (24) , 3515-3526
Experimental analysis of the impact protection properties for Kevlar® fabrics under different orientation layers and non-Newtonian fluid compositions
Use of colloidal silica suspensions impregnated in Kevlar® fabrics is new avant-garde of protection equipment for stab wounds and piercing objects. Kevlar® fabrics impregnated with non-Newtonian fluids have been used for protection against sharp blows, mainly due to their lightweight, good flexibility, and superior resistance properties. The aims of this investigation are to demonstrate that Kevlar® fabric impregnated with shear thickening fluids could be improved its performance through the use Aminopropyltrimethoxysilane, as well as by increasing the concentration of silica nanoparticles in its composition. Friction tests on yarns showed that Kevlar® yarns with shear thickening fluids (sample C3—25% Silica and 75%polyethylene glycol with 38% aminopropyltrimethoxysilane), presented higher strength values (10.5 N) when compared with other samples. Impact resistance tests showed that Kevlar® samples with highest concentration shear thickening fluids nanoparticles and oriented fabric layers (C3 OR) presented better performance regarding to penetration depth of stabs P1 (17 mm), S1 (18 mm) and as well as residual energy dissipation, when compared with the standard and other samples. Addition of shear thickening fluids cause reduction in the flexibility of the Kevlar® fabrics, producing sample with 42.74% less flexibility than the standard sample (C3). Adhesion tests for C3 samples exhibited more stable wettability and spreading rate, i.e., a greater adhesion of shear thickening fluids in Kevlar® fabrics than other samples due to its composition (higher concentration of nanoparticles and superior amount of silane agent). Finally, results showed that the shear thickening fluids composition as well as Kevlar® layers orientation should be used to improve the performance of Kevlar® fabrics under impact tests.
- 7 April 2020
- Published by SAGE Publications in Journal of Composite Materials
- Vol. 54 (24) , 3515-3526
Experimental analysis of the impact protection properties for Kevlar® fabrics under different orientation layers and non-Newtonian fluid compositions
Use of colloidal silica suspensions impregnated in Kevlar® fabrics is new avant-garde of protection equipment for stab wounds and piercing objects. Kevlar® fabrics impregnated with non-Newtonian fluids have been used for protection against sharp blows, mainly due to their lightweight, good flexibility, and superior resistance properties. The aims of this investigation are to demonstrate that Kevlar® fabric impregnated with shear thickening fluids could be improved its performance through the use Aminopropyltrimethoxysilane, as well as by increasing the concentration of silica nanoparticles in its composition. Friction tests on yarns showed that Kevlar® yarns with shear thickening fluids (sample C3—25% Silica and 75%polyethylene glycol with 38% aminopropyltrimethoxysilane), presented higher strength values (10.5 N) when compared with other samples. Impact resistance tests showed that Kevlar® samples with highest concentration shear thickening fluids nanoparticles and oriented fabric layers (C3 OR) presented better performance regarding to penetration depth of stabs P1 (17 mm), S1 (18 mm) and as well as residual energy dissipation, when compared with the standard and other samples. Addition of shear thickening fluids cause reduction in the flexibility of the Kevlar® fabrics, producing sample with 42.74% less flexibility than the standard sample (C3). Adhesion tests for C3 samples exhibited more stable wettability and spreading rate, i.e., a greater adhesion of shear thickening fluids in Kevlar® fabrics than other samples due to its composition (higher concentration of nanoparticles and superior amount of silane agent). Finally, results showed that the shear thickening fluids composition as well as Kevlar® layers orientation should be used to improve the performance of Kevlar® fabrics under impact tests.
- Open Access
- 24 July 2019
- Published by MDPI AG in Nanomaterials
- Vol. 9 (8) , 1064
Multifunctional Chitosan/Gold Nanoparticles Coatings for Biomedical Textiles
Gold nanoparticles (AuNPs), chemically synthesized by citrate reduction, were for the first time immobilized onto chitosan-treated soybean knitted fabric via exhaustion method. AuNPs were successfully produced in the form of highly spherical, moderated polydisperse, stable structures. Their average size was estimated at ≈35 nm. Successful immobilization of chitosan and AuNPs were confirmed by alterations in the fabric’s spectrophotometric reflectance spectrum and by detection of nitrogen and gold, non-conjugated C=O stretching vibrations of carbonyl functional groups and residual N-acetyl groups characteristic bands by X-ray photoelectron spectroscopy (XPS) and Fourier-Transform Infrared Spectroscopy (FTIR) analysis. XPS analysis confirms the strong binding of AuNPs on the chitosan matrix. The fabrics’ thermal stability increased with the introduction of both chitosan and AuNPs. Coated fabrics revealed an ultraviolet protection factor (UPF) of +50, which established their effectiveness in ultraviolet (UV) radiation shielding. They were also found to resist up to 5 washing cycles with low loss of immobilized AuNPs. Compared with AuNPs or chitosan alone, the combined functionalized coating on soy fabrics demonstrated an improved antimicrobial effect by reducing Staphylococcus aureus adhesion (99.94%) and Escherichia coli (96.26%). Overall, the engineered fabrics were confirmed as multifunctional, displaying attractive optical properties, UV-light protection and important antimicrobial features, that increase their interest for potential biomedical applications.
- 24 July 2019
- Published by MDPI AG in Nanomaterials
- Vol. 9 (8) , 1064
Open AccessMultifunctional Chitosan/Gold Nanoparticles Coatings for Biomedical Textiles
Gold nanoparticles (AuNPs), chemically synthesized by citrate reduction, were for the first time immobilized onto chitosan-treated soybean knitted fabric via exhaustion method. AuNPs were successfully produced in the form of highly spherical, moderated polydisperse, stable structures. Their average size was estimated at ≈35 nm. Successful immobilization of chitosan and AuNPs were confirmed by alterations in the fabric’s spectrophotometric reflectance spectrum and by detection of nitrogen and gold, non-conjugated C=O stretching vibrations of carbonyl functional groups and residual N-acetyl groups characteristic bands by X-ray photoelectron spectroscopy (XPS) and Fourier-Transform Infrared Spectroscopy (FTIR) analysis. XPS analysis confirms the strong binding of AuNPs on the chitosan matrix. The fabrics’ thermal stability increased with the introduction of both chitosan and AuNPs. Coated fabrics revealed an ultraviolet protection factor (UPF) of +50, which established their effectiveness in ultraviolet (UV) radiation shielding. They were also found to resist up to 5 washing cycles with low loss of immobilized AuNPs. Compared with AuNPs or chitosan alone, the combined functionalized coating on soy fabrics demonstrated an improved antimicrobial effect by reducing Staphylococcus aureus adhesion (99.94%) and Escherichia coli (96.26%). Overall, the engineered fabrics were confirmed as multifunctional, displaying attractive optical properties, UV-light protection and important antimicrobial features, that increase their interest for potential biomedical applications.
- 1 July 2019
- Published by Trans Tech Publications, Ltd. in Key Engineering Materials
- Vol. 812, 120-126
Military Textiles - An Overview of New Developments
Textiles for military clothing face a complex set of challenges. They must provide protection, durability and comfort in a wide range of hostile environments. The general requirements of military textiles include damage resistance, comfort, sweat management, cold-weather conditions and the integration of high-tech materials into uniforms. This paper discusses the main concepts regarding the application of textiles in military uses, where the surrounding environments such as desert, jungle or extremely cold areas as well as the nature of the situations involved pose a threat to the soldier’s safety. Therefore, the improvement and development of fibrous materials, textile structures and finishing processes can bring new perspectives for saving lives.
- 1 July 2019
- Published by Trans Tech Publications, Ltd. in Key Engineering Materials
- Vol. 812, 120-126
Military Textiles - An Overview of New Developments
Textiles for military clothing face a complex set of challenges. They must provide protection, durability and comfort in a wide range of hostile environments. The general requirements of military textiles include damage resistance, comfort, sweat management, cold-weather conditions and the integration of high-tech materials into uniforms. This paper discusses the main concepts regarding the application of textiles in military uses, where the surrounding environments such as desert, jungle or extremely cold areas as well as the nature of the situations involved pose a threat to the soldier’s safety. Therefore, the improvement and development of fibrous materials, textile structures and finishing processes can bring new perspectives for saving lives.
- 1 July 2019
- Published by Trans Tech Publications, Ltd. in Key Engineering Materials
- Vol. 812, 107-113
Dyeing of Meta-Aramid Fibres Previously Functionalized with Poly(Diallyldimethylammonium Chloride)
In this work, a weft-knitted fabric produced from 100% meta-aramid (MA) fibre was functionalized by using polyelectrolyte, Poly (diallyldimethylammonium chloride) (PDDA), in order to modify its surface for dyeing with an uncommon dye class for MA fibres. Contact angle, dye solution drop adsorption, Scanning Electron Microscopy (SEM), reflectance spectrophotometry, washing and rubbing fastness tests were performed to study the effects caused by the interaction between PDDA and MA fabric. Good results of dyebath exhaustion with excellent values of colour strength were obtained for the samples previously treated with PDDA. These results showed the possibility of obtaining distinct and deep colours besides generating a lower energetic cost using shorter time and lower dyeing temperature as compared to those normally used in the MA dyeing process.
- 1 July 2019
- Published by Trans Tech Publications, Ltd. in Key Engineering Materials
- Vol. 812, 107-113
Dyeing of Meta-Aramid Fibres Previously Functionalized with Poly(Diallyldimethylammonium Chloride)
In this work, a weft-knitted fabric produced from 100% meta-aramid (MA) fibre was functionalized by using polyelectrolyte, Poly (diallyldimethylammonium chloride) (PDDA), in order to modify its surface for dyeing with an uncommon dye class for MA fibres. Contact angle, dye solution drop adsorption, Scanning Electron Microscopy (SEM), reflectance spectrophotometry, washing and rubbing fastness tests were performed to study the effects caused by the interaction between PDDA and MA fabric. Good results of dyebath exhaustion with excellent values of colour strength were obtained for the samples previously treated with PDDA. These results showed the possibility of obtaining distinct and deep colours besides generating a lower energetic cost using shorter time and lower dyeing temperature as compared to those normally used in the MA dyeing process.
- Open Access
- 1 January 2019
- Published by GN1 Sistemas e Publicacoes Ltd.
Gestão da Produção em Foco - Volume 31
- 1 January 2019
- Published by GN1 Sistemas e Publicacoes Ltd.
Open AccessGestão da Produção em Foco - Volume 31