Johan Lundgren
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Research Interests
Johan Lundgren has a total of 7 co-authors. Here are the top co-authors by number of shared publications:
- Oscar Quevedo-Teruel
KTH Royal Institute of Technology
3 shared publications - Oskar Zetterstrom
KTH Royal Institute of Technology, Stockholm, Sweden
3 shared publications - Bengt Lars Gunnar Jonsson
KTH Royal Institute of Technology, EECS, Stockholm, Sweden
2 shared publications - Jari-Matti Hannula
Department of Electronics and Nanoengineering, Aalto University School of Electrical Engineering, Espoo, Finland
2 shared publications - Johan Malmström
Surveillance, Saab AB, Jrflla, Sweden
2 shared publications - Francisco Mesa
KTH Royal Institute of Technology
1 shared publication
Latest Publications
- Open Access
- 12 January 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Antennas and Propagation
- Vol. 74 (3) , 2250-2262
A Compact Bowl-Shaped Ring-Loaded Antenna Designed Using Characteristic Mode Analysis for Multiband Base Stations
A compact dual-band antenna element is presented that operates in the bands 0.617-0.894GHz (36.7% fractional bandwidth), and 1.69-2.4 GHz (34.7% fractional bandwidth). The dual-band antenna element consists of a low-band bowl-shaped antenna with a ring for the low-band and a high-band dipole antenna, placed in the center of the bowl. The ring is used to reduce the size of the dual-band antenna element without compromising the bandwidth. The presence of the ring can introduce spurious resonance modes in the structure that impairs the performance of the antenna. These resonances are suppressed by placing stubs on the ring. The proposed dual-band antenna element consists of robust metallic components, with some dielectric supports. As a result, the antenna provides a high radiation efficiency and power handling, making it suitable as a base station antenna. Furthermore, the presented antenna is also demonstrated to be suitable for array configurations, which is critical for the targeted application. A prototype is manufactured and tested to corroborate the simulation results, and a good agreement is found. Importantly, the measured radiation efficiency is higher than 96% and 93% in the targeted low and high bands.
- 12 January 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Antennas and Propagation
- Vol. 74 (3) , 2250-2262
Open AccessA Compact Bowl-Shaped Ring-Loaded Antenna Designed Using Characteristic Mode Analysis for Multiband Base Stations
A compact dual-band antenna element is presented that operates in the bands 0.617-0.894GHz (36.7% fractional bandwidth), and 1.69-2.4 GHz (34.7% fractional bandwidth). The dual-band antenna element consists of a low-band bowl-shaped antenna with a ring for the low-band and a high-band dipole antenna, placed in the center of the bowl. The ring is used to reduce the size of the dual-band antenna element without compromising the bandwidth. The presence of the ring can introduce spurious resonance modes in the structure that impairs the performance of the antenna. These resonances are suppressed by placing stubs on the ring. The proposed dual-band antenna element consists of robust metallic components, with some dielectric supports. As a result, the antenna provides a high radiation efficiency and power handling, making it suitable as a base station antenna. Furthermore, the presented antenna is also demonstrated to be suitable for array configurations, which is critical for the targeted application. A prototype is manufactured and tested to corroborate the simulation results, and a good agreement is found. Importantly, the measured radiation efficiency is higher than 96% and 93% in the targeted low and high bands.
- Open Access
- 1 January 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Antennas and Propagation Magazine
- p. 2-14
Frequency-Dependent Downtilt for Base Station Antennas: Realized using contactless loaded-line phase shifters
- 1 January 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Antennas and Propagation Magazine
- p. 2-14
Open AccessFrequency-Dependent Downtilt for Base Station Antennas: Realized using contactless loaded-line phase shifters
- Open Access
- 10 September 2021
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Electromagnetic Compatibility
- Vol. 64 (1) , 92-101
Visualization and Reduction of Mutual Coupling Between Antennas Installed on a Platform
Mutual coupling, or equivalently, the isolation between antennas, is a key parameter in antenna system design. In this article, the previously defined impedance density is generalized, and it is demonstrated how it can be used to obtain spatial information about the mutual coupling. The generalized impedance density is a real-valued scalar and it can be visualized as a three-dimensional (3-D) density in space. It is shown that there is a strong connection between regions with a positive (negative) generalized impedance density and a decrease (increase) of the coupling when an absorber is placed in that region. This predictive ability is a useful feature, which is tested for three numerical cases. The results are robust to the shape of the platform, and it can be compared across frequencies. By placing absorbers based on the generalized impedance density, it is possible to reduce the required amount of absorbers needed to obtain a certain reduction in mutual coupling. The visualization results and predictions of absorber positions are compared with a Poynting vector based method. Placing absorbers based on the generalized impedance density had a larger impact on the mutual coupling, compared to the predictions with the Poynting vector based method in the investigated cases.
- 10 September 2021
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Electromagnetic Compatibility
- Vol. 64 (1) , 92-101
Open AccessVisualization and Reduction of Mutual Coupling Between Antennas Installed on a Platform
Mutual coupling, or equivalently, the isolation between antennas, is a key parameter in antenna system design. In this article, the previously defined impedance density is generalized, and it is demonstrated how it can be used to obtain spatial information about the mutual coupling. The generalized impedance density is a real-valued scalar and it can be visualized as a three-dimensional (3-D) density in space. It is shown that there is a strong connection between regions with a positive (negative) generalized impedance density and a decrease (increase) of the coupling when an absorber is placed in that region. This predictive ability is a useful feature, which is tested for three numerical cases. The results are robust to the shape of the platform, and it can be compared across frequencies. By placing absorbers based on the generalized impedance density, it is possible to reduce the required amount of absorbers needed to obtain a certain reduction in mutual coupling. The visualization results and predictions of absorber positions are compared with a Poynting vector based method. Placing absorbers based on the generalized impedance density had a larger impact on the mutual coupling, compared to the predictions with the Poynting vector based method in the investigated cases.
- Open Access
- 6 July 2021
- Published by Institute of Electrical and Electronics Engineers (IEEE) in TechRxiv
Visualization and Reduction of Mutual Coupling Between Antennas Installed on a Platform
Mutual coupling, or equivalently, the isolation between antennas, is a key parameter in antenna system design. In this work, the previously defined impedance density is generalized, and it is demonstrated how it can be used to obtain spatial information about the mutual coupling. The generalized impedance density is a real-valued scalar and it can be visualized as a three-dimensional density in space. It is shown that there is a strong connection between regions with a positive (negative) generalized impedance density and a decrease (increase) of the coupling when an absorber is placed in that region. This predictive ability is a useful feature, which is tested for three numerical cases. The results are robust to the shape of the platform, and it can be compared across frequencies. By placing absorbers based on the generalized impedance density, it is possible to reduce the required amount of absorbers needed to obtain a certain reduction in mutual coupling. The visualization results and predictions of absorber positions are compared with a Poynting vector based method. Placing absorbers based on the generalized impedance density had a larger impact on the mutual coupling, compared to the predictions with the Poynting vector based method in the investigated cases.
- 6 July 2021
- Published by Institute of Electrical and Electronics Engineers (IEEE) in TechRxiv
Open AccessVisualization and Reduction of Mutual Coupling Between Antennas Installed on a Platform
Mutual coupling, or equivalently, the isolation between antennas, is a key parameter in antenna system design. In this work, the previously defined impedance density is generalized, and it is demonstrated how it can be used to obtain spatial information about the mutual coupling. The generalized impedance density is a real-valued scalar and it can be visualized as a three-dimensional density in space. It is shown that there is a strong connection between regions with a positive (negative) generalized impedance density and a decrease (increase) of the coupling when an absorber is placed in that region. This predictive ability is a useful feature, which is tested for three numerical cases. The results are robust to the shape of the platform, and it can be compared across frequencies. By placing absorbers based on the generalized impedance density, it is possible to reduce the required amount of absorbers needed to obtain a certain reduction in mutual coupling. The visualization results and predictions of absorber positions are compared with a Poynting vector based method. Placing absorbers based on the generalized impedance density had a larger impact on the mutual coupling, compared to the predictions with the Poynting vector based method in the investigated cases.
- Open Access
- 18 May 2021
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Antennas and Wireless Propagation Letters
- Vol. 20 (11) , 2191-2195
Fully Metallic Dual-Band Linear-to-Circular Polarizer for K/Ka-band
A dual-band polarizer is presented that converts linear polarization into circular polarization with orthogonal handedness in the satcom bands 19.7–20.2 GHz and 29.5–30 GHz. The polarizer consists of three identical cascaded perforated metallic screens, whose perforations are periodically repeated crosses of two sizes. Unlike previously reported dual-band polarizers, our design is fully metallic, which results in low losses and makes it suitable for space applications. A prototype of the polarizer with 20 × 20 unit cells is manufactured, and the measurement results agree well with the simulated results. In the nominal satcom bands, the measured axial ratio and the insertion loss are better than 1.7 and 0.67 dB. In the bands 18.9–20.3 GHz and 29.1–30.1 GHz, the measured axial ratio and insertion loss are below 3 and 1 dB.
- 18 May 2021
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Antennas and Wireless Propagation Letters
- Vol. 20 (11) , 2191-2195
Open AccessFully Metallic Dual-Band Linear-to-Circular Polarizer for K/Ka-band
A dual-band polarizer is presented that converts linear polarization into circular polarization with orthogonal handedness in the satcom bands 19.7–20.2 GHz and 29.5–30 GHz. The polarizer consists of three identical cascaded perforated metallic screens, whose perforations are periodically repeated crosses of two sizes. Unlike previously reported dual-band polarizers, our design is fully metallic, which results in low losses and makes it suitable for space applications. A prototype of the polarizer with 20 × 20 unit cells is manufactured, and the measurement results agree well with the simulated results. In the nominal satcom bands, the measured axial ratio and the insertion loss are better than 1.7 and 0.67 dB. In the bands 18.9–20.3 GHz and 29.1–30.1 GHz, the measured axial ratio and insertion loss are below 3 and 1 dB.