GWGanemulle Lekamalage Dharmasri Wickramasinghe

Ganemulle Lekamalage Dharmasri Wickramasinghe

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Ganemulle Lekamalage Dharmasri Wickramasinghe has a total of 27 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Development of spun-like stretch fabrics using air-jet textured T400 yarn: effect of air-pressure and yarn overfeed on fabric properties

    by R.O.W.W. Dewasurendra, G.L.D. Wickramasinghe, Chathura Jayarathne, Ushayini Jeyaraj, U.S.W. Gunasekara, K.P.M.C.K.B. Karunarathne

    Purpose: This study investigates the effect of air-jet texturing (AJT) parameters on the properties of knitted fabrics produced from spun-like elastomultiester polyester (T400) yarns, focussing on the effect of air pressure, core-yarn overfeed, and effect-yarn overfeed on stretch fabric properties. Design/methodology/approach: T400 yarns were textured using a standard SSM air-jet texturing machine with commercial nozzles. Knitted fabrics were made on a 14-gauge Shima Seiki machine. The effects of selected AJT parameters were systematically evaluated in terms of yarn and fabric properties. Findings: AJT process parameters significantly affected the resulting fabric properties. T400 filaments required processing conditions different from those used for conventional non-stretch filaments. Spun-like stretch fabrics were successfully produced from T400 alone, without blending with spandex or other polymer yarns, providing a potential advantage for recycling. Research limitations/implications: The study is limited to T400 yarns, selected AJT parameter ranges, and fixed knitting conditions. Further research should examine other Elastomultiester yarns and wider processing conditions. Practical implications: The approach enables the production of high-performance, spun-like stretch fabrics from a polyester bicomponent, offering a potentially more recyclable alternative to spandex-polyester blends. Social implications: This research will contribute to positive social outcomes by promoting responsible waste management and encouraging recycling practices. Originality/value: This study demonstrates a polyester bicomponent approach to producing spun-like stretch fabrics through air-jet texturing of T400 yarn, contributing to more recyclable stretch textile development.

  • Investigation of the effect of core- and effect-yarn overfeed on the air-jet texturing of stretchable spun-like elastomultiester (T400) polyester yarns

    by R.O.W.W. Dewasurendra, G.L.D. Wickramasinghe, Chathura Jayarathna, Ushayini Jeyaraj, U.S.W. Gunasekera, K.P.M.C.K.B. Karunaratne

    Purpose: The purpose of this study is to evaluate the influence of core- and effect-yarn overfeed parameters on the air-jet texturing (AJT) of stretchable spun-like elastomultiester (T400) polyester yarns and to establish the optimum overfeed conditions for the production of spun-like stretchable textured yarns. Design/methodology/approach: T400 AJT yarns were produced using a standard SSM AJT machine using standard commercial nozzles. The effects of core-yarn overfeed and effect-yarn overfeed on yarn structure and mechanical properties were systematically investigated. Findings: Results show that both core- and effect-yarn overfeeds strongly influence yarn formation. Unlike conventional filament yarns, which can operate at lower overfeeds, T400 filaments require core overfeeds above 10% to achieve stable and effective texturing. Research limitations/implications: This study was limited to the AJT Elastomultiester polyester (T400) filaments under a selected range of processing conditions. Practical implications: The study supports industry adoption of spun-like T400 stretch yarns, enabling easier recycling and promoting more sustainable and recyclable practices. Originality/value: The study demonstrates the feasibility of producing spun-like T400 yarns. This approach eliminates the need for multi-component stretch yarns, thereby supporting sustainable and recyclable high-performance textile manufacturing.

  • Open Access

    Institutional implementation of Industry 4.0 competencies in TVET programmes in the Indo-Pacific: Critical success factors

    by Ganemulle Wickramasinghe, Vathsala Wickramasinghe

    This article responds to the question: What are the critical success factors that support the implementation of Industry 4.0 competencies in TVET (technical and vocational education and training) programme offerings? The scope of our study was programme offerings targeting STEM (science, technology, engineering and mathematics) fields at the tertiary level across 15 countries in the Indo-Pacific region. The study evaluated the ‘actions already taken’ to implement Industry 4.0 competencies, and a survey questionnaire was used to collect data. The findings identified staff capacity development, a supportive culture, the availability of resources, and public awareness as critical success factors. In addition, TVET institution type and the annual growth rate of real GDP (gross domestic product) per employed person were found to boost the relationship between these factors. This means that TVET colleges are in a weaker position in implementing Industry 4.0 compared with the other two types of institutions in the study.


  • The Potential of Utilizing Sri Lankan Banana Agro-Waste to Generate Sustainable Textiles

    by G. L. D. Wickramasinghe, U. S. W. Gunasekera, A. C. S. I. Mumthas

  • Open Access

    Total Productive Maintenance, Affective Commitment and Employee Retention in Apparel Production

    by G. L. D. Wickramasinghe, M. P. A. Perera

    The success of the implementation of advanced manufacturing systems, such as total productive maintenance (TPM), depends on employee commitment and retention. This study investigated total productive maintenance (TPM) practices implemented by apparel production firms, and the effect of these practices on affective commitment (AC), and employee retention (ER) of operators on the production floor. The study adopted the survey research methodology. In total, 411 operators from apparel production firms responded to the study. The responses were analyzed using statistical methods. Four hundred and eleven responses were received for the survey and data were analyzed using statistical methods. The findings suggest that TPM practices significantly positively affect AC. Affective commitment mediates between TPM and ER. The success and sustainability of TPM implementations depend on the firm’s ability to retain trained operators and keep their AC high. The study has several implications for theory and practice.


  • False-twist texturing with water-jet twister/cooler: effect of water pressure on textured yarn properties

    by P. W. Foster, G. L. D. Wickramasinghe, U. S. W. Gunasekara

    The objective of this research work was to investigate the effect of water pressure on the properties of false-twist textured yarn produced using an innovative false-twist texturing system with waterjet twister/cooler and superheated steam heater. Commercial texturing speed of 800 m/min was selected for this paper so as to establish that this innovative method can be used for false twist texturing successfully. This method replaces the contact heater of a standard false-twist machine with a 'super-heated steam heater' and 'the normal false-twisting device and cooler' replaced with a 'water-jet twister/cooler' combined into one unit, so as to reduce the thread-line length and to increase the production speed significantly. The new heating, twisting and cooling unit is only one metre in length. The reduced thread path has significant advantages when the surging speed is considered. The shorter thread path reduces thread instability and so higher texturing speeds can be achieved. Since the water-jet twisting is virtually friction-free, and has no mechanical moving parts, the production speed can be increased avoiding filament breaks. Results show that this innovative method of false twist texturing can achieve high bulk levels above 40% with good process stability at 800 m/min. Water pressure has a significant positive correlation with twist level and bulk percentage and significant negative correlations with textured yarn tenacity and elongation. When the water pressure is increased, the level of twist imparted to the yarn and the bulk level increase to a maximum. Overall, the results show that the new method of false-twist texturing is capable to produce false-twist textured yarn with success.


  • Open Access

    Investigation on mechanical and chemical properties of mechanically extracted banana fibre in pseudostem layers: From Sri Lankan banana (Musa) cultivation waste

    by Subashini Balakrishnan, Ganemulle Lekamalage Dharmasri Wickramasinghe, Udumalagala Gamage Samudrika Wijayapala

    This research investigates the factor influencing the quality of the fibre inside the banana pseudostem to determine which layers are suitable for delivering fine banana fibre. This research identifies the banana pseudostem layer-wise properties. Puwalu and Ambun fibres were obtained from the Kurunagala district in Sri Lanka. Banana fibres were separated from pseudostem by using a decorticator machine. Scanning electron microscopy, Fourier transform infrared spectrophotometer (FTIR) and universal tensile tester machine were used for the testing. The test results showed that the middle layers of the pseudostem to be the finest and strong. The lignin contains in the middle layer of fibre was lower than that of the first layer of fibres. The linear density of the ambun middle layer is 25 tex, the average diameter value is 80 µm and range of single fibre strength is 273–270 gf. Linear density of the puwalu middle layer is 29 tex, the diameter value was varying in between 98 and 100 µm and range of single fibre strength is 270–271 gf. The findings of this research will help anybody to select a suitable layer of Sri Lankan banana cultivars fibres based on physical and chemical properties. Then, these fine fibres can be a bridge over the extensive gap between natural cellulose substitute fibre demand.


  • Effect of air pressure on polyester/nylon air-intermingled yarn and melange fabric properties

    by G. L. D. Wickramasinghe, S. U. Dolawatte, I. U. Thebuwana, W. W. S. S. Botheju

    The objectives of this research work were to investigate the effect of air pressure on properties of polyester/nylon intermingled yarn and melange fabric with special reference to melange fabric appearance. Air pressure has significant negative correlation with all the intermingled yarn properties except mingle stability. Air pressure has positive correlations with melange fabric appearance in terms of black pixels and negative correlation with fabric weight. Regression analysis show that the effects with intermingled yarn properties and melange fabric properties are statistically significant except the number of mingle points. Melange appearance varies from stripe to homogeneous distribution when the air pressure is increased. Air pressure does not have significant influence on the number of mingle points. Mingle stability results indicate that 2 bar air pressure is not adequate for intermingling and the pressure between 3 bar and 4 bar seems more economical to operate that gives higher mingle stability. Higher yarn linear density at 3 bar and 4 bar air pressures indicate higher level of entanglements. Melange fabric weight decreases when air pressure is increased, but the weight difference between 3 bar 4 bar is not significant. Therefore, it can be concluded that air pressure is a critical parameter in developing melange fabrics from polyester/nylon intermingled yarns and the air pressure from 3 bar to 4 bar seems more economical and gives better intermingled yarn and fabric permeance.