Jiong Zhu
Research Subjects
Jiong Zhu has a total of 14 co-authors. Here are the top co-authors by number of shared publications:
- Bing Li
Xuzhou University of Technology, Xuzhou 221008, China
2 shared publications - Chao Ma
Xuzhou University of Technology, Xuzhou 221008, China
2 shared publications - Lianying Zhang
School of Physics and New Energy, Xuzhou University of Technology, Xuzhou 221018, China
2 shared publications - Guangyu Wu
Department of Radiology, Renji Hospital, Shanghai Jiao Tong University School of Medicine, Shanghai, China
1 shared publication - Hai Pu
State Key Laboratory of Intelligent Construction and Healthy Operation and Maintenance of Deep Earth Engineering, China University of Mining and Technology, Xuzhou 221116, China
1 shared publication Huajuan Zhang
National Engineering Research Center for Nanotechnology, Shanghai 200241, China
1 shared publication
Latest Publications
- Open Access
- 1 January 2021
- Published by Wiley in Advances in Civil Engineering
- Vol. 2021 (1)
Chloride Ion Corrosion Pattern and Mathematical Model for C60 High‐Strength Concrete after Freeze‐Thawing Cycles
In this study, the porosities of C60 high‐strength concrete after 0, 30, 60, and 90 freeze‐thaw cycles determined via the water retention method are 1.30%, 3.65%, 5.14%, and 7.34%, respectively. Furthermore, a mathematical model of porosity varying with the number of freeze‐thaw cycles is established. Using an artificial environment simulation experimental system and the natural diffusion method, the chloride diffusion law of C60 high‐strength concrete after 0, 30, 60, and 90 freeze‐thaw cycles is obtained. The corresponding diffusion coefficients are calculated based on the experimental results and Fick’s law, where 0.3431 × 10−12, 0.5288 × 10−12, and 0.6712 × 10−12, and 0.8930 × 10−12 m2/s are obtained, respectively, and a mathematical model of diffusion coefficient with freeze‐thawing is established. Transport control equations comprising solution flow and solute migration control equations are established for chloride ions in concrete after freeze‐thawing cycles. The equations consider the effects of freeze‐thawing, solution pressure, solution concentration, solution density, convection, mechanical dispersion, and chemisorption on chloride ion transport in concrete. Using COMSOL numerical software, the transport control equations for chloride ions are solved using a real concrete numerical model, and the chloride ion corrosion process in concrete after freeze‐thaw cycles is simulated. The simulation results are consistent with the experimental values.
- 1 January 2021
- Published by Wiley in Advances in Civil Engineering
- Vol. 2021 (1)
Open AccessChloride Ion Corrosion Pattern and Mathematical Model for C60 High‐Strength Concrete after Freeze‐Thawing Cycles
In this study, the porosities of C60 high‐strength concrete after 0, 30, 60, and 90 freeze‐thaw cycles determined via the water retention method are 1.30%, 3.65%, 5.14%, and 7.34%, respectively. Furthermore, a mathematical model of porosity varying with the number of freeze‐thaw cycles is established. Using an artificial environment simulation experimental system and the natural diffusion method, the chloride diffusion law of C60 high‐strength concrete after 0, 30, 60, and 90 freeze‐thaw cycles is obtained. The corresponding diffusion coefficients are calculated based on the experimental results and Fick’s law, where 0.3431 × 10−12, 0.5288 × 10−12, and 0.6712 × 10−12, and 0.8930 × 10−12 m2/s are obtained, respectively, and a mathematical model of diffusion coefficient with freeze‐thawing is established. Transport control equations comprising solution flow and solute migration control equations are established for chloride ions in concrete after freeze‐thawing cycles. The equations consider the effects of freeze‐thawing, solution pressure, solution concentration, solution density, convection, mechanical dispersion, and chemisorption on chloride ion transport in concrete. Using COMSOL numerical software, the transport control equations for chloride ions are solved using a real concrete numerical model, and the chloride ion corrosion process in concrete after freeze‐thaw cycles is simulated. The simulation results are consistent with the experimental values.
- Open Access
- 1 January 2020
- Published by Wiley in Advances in Civil Engineering
- Vol. 2020 (1)
Damage Mechanism of Mineral Admixture Concrete under Marine Corrosion and Freezing‐Thawing Environment
Understanding the performance of concrete in the marine environment is significant for preventing the corrosion of chloride ion for marine buildings. In this study, the uniaxial compressive strength (UCS), chloride ion concentration (CIC), microstructure, and pore structure of admixture concretes were tested to study the mechanical properties and microscopic characteristics under the single marine corrosion, the single freezing‐thawing, and the coupled marine corrosion and freezing‐thawing conditions. The results indicate that the concrete mixed with both fly ash and mineral powder has better UCS, chloride ion penetration resistance, and freezing‐thawing resistance than the concrete with the single fly ash or mineral powder. Under the marine corrosion environment and coupled corrosion and freezing‐thawing environment, the UCS of the concrete with both fly ash and mineral powder increases firstly and then decreases with the increase of the corrosion time. This is because the pore of the filling body is filled by large crystalline salts generated by the reaction of chloride ions and concrete; then, cementation of the cement is increased in the early corrosion; meanwhile, the increase of crystal salt in the subsequent corrosion process leads to the growth of microcracks and the formation of macrocracks in concrete specimens. In addition, a freezing‐thawing‐corrosion composite strength impact factor is introduced to describe the effect of coupled corrosion and freezing‐thawing on the mechanical property of the concrete. The results show that the corrosion is the dominant factor after 0, 30, and 60 freezing‐thawing cycles, while the freezing‐thawing is the dominant factor after 90 freezing‐thawing cycles.
- 1 January 2020
- Published by Wiley in Advances in Civil Engineering
- Vol. 2020 (1)
Open AccessDamage Mechanism of Mineral Admixture Concrete under Marine Corrosion and Freezing‐Thawing Environment
Understanding the performance of concrete in the marine environment is significant for preventing the corrosion of chloride ion for marine buildings. In this study, the uniaxial compressive strength (UCS), chloride ion concentration (CIC), microstructure, and pore structure of admixture concretes were tested to study the mechanical properties and microscopic characteristics under the single marine corrosion, the single freezing‐thawing, and the coupled marine corrosion and freezing‐thawing conditions. The results indicate that the concrete mixed with both fly ash and mineral powder has better UCS, chloride ion penetration resistance, and freezing‐thawing resistance than the concrete with the single fly ash or mineral powder. Under the marine corrosion environment and coupled corrosion and freezing‐thawing environment, the UCS of the concrete with both fly ash and mineral powder increases firstly and then decreases with the increase of the corrosion time. This is because the pore of the filling body is filled by large crystalline salts generated by the reaction of chloride ions and concrete; then, cementation of the cement is increased in the early corrosion; meanwhile, the increase of crystal salt in the subsequent corrosion process leads to the growth of microcracks and the formation of macrocracks in concrete specimens. In addition, a freezing‐thawing‐corrosion composite strength impact factor is introduced to describe the effect of coupled corrosion and freezing‐thawing on the mechanical property of the concrete. The results show that the corrosion is the dominant factor after 0, 30, and 60 freezing‐thawing cycles, while the freezing‐thawing is the dominant factor after 90 freezing‐thawing cycles.
- Open Access
- 31 March 2016
- Published by Yaoyi International Publishing in General Chemistry
- Vol. 2 (1) , 31-37
Multifunctional Lymph-Targeted ZnO:Gd@Hyaluronic Acid Nanospheres: Preparation and Application in Tumor Diagnose
- 31 March 2016
- Published by Yaoyi International Publishing in General Chemistry
- Vol. 2 (1) , 31-37
Open AccessMultifunctional Lymph-Targeted ZnO:Gd@Hyaluronic Acid Nanospheres: Preparation and Application in Tumor Diagnose