Paolo Fraschini
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Previous Organizations / Institutes
The organizations / institutes from the scholar's other articles in the past ten years
Paolo Fraschini has a total of 94 co-authors. Here are the top co-authors by number of shared publications:
- Davide Felice Redaelli
Politecnico di Milano, Milan, Italy
5 shared publications - Emilia Biffi
Scientific Institute, IRCCS Eugenio Medea, Bosisio Parini, 23842 Lecco, Italy
4 shared publications - Giorgio Colombo
Politecnico di Milano
4 shared publications - Fabio Alexander Storm
Scientific Institute, IRCCS “E. Medea”, 23842 Bosisio Parini, Italy
3 shared publications - Alfredo Ronca
Institute of Polymers, Composites and Biomaterials, National Research Council, 80125 Naples, Italy
2 shared publications - Andrea Sorrentino
Institute for Polymers, Composites, and Biomaterials (IPCB-CNR), via Previati n. 1/E, 23900 Lecco, Italy
2 shared publications
Latest Publications
- Open Access
Additive Manufacturing of Spinal Braces: Evaluation of Production Process and Postural Stability in Patients with Scoliosis
Spinal orthoses produced using additive manufacturing show great potential for obtaining patient-specific solutions in clinical applications, reducing manual operations, time consumption, and material waste. This study was conducted to evaluate the production process of spinal orthoses produced by additive manufacturing, and to test the effects of 3D-printed braces on postural stability in patients with adolescent idiopathic scoliosis and osteogenesis imperfecta. Ten patients were recruited consecutively and were asked to wear a spinal orthosis produced by additive manufacturing for 2 weeks. The four phases of the production process for each brace were evaluated separately on a scale from 0 (not acceptable) to 3 (optimal). Postural stability in the unbraced and the two braced conditions (3D-printed and conventional) was assessed using validated metrics obtained from a wearable inertial sensor. The production process was evaluated as good in four cases, acceptable in five cases, and not acceptable in one case, due to problems in the printing phase. No statistically significant differences were observed in any of the postural balance metrics between the 3D-printed and conventional brace. On the other hand, postural balance metrics improved significantly with both types of braces with respect to the unbraced condition. Spinal orthoses produced with an innovative production process based on digital scans, CAD, and 3D printing are valid alternatives to conventionally produced orthoses, providing equivalent postural stability.
Open AccessAdditive Manufacturing of Spinal Braces: Evaluation of Production Process and Postural Stability in Patients with Scoliosis
Spinal orthoses produced using additive manufacturing show great potential for obtaining patient-specific solutions in clinical applications, reducing manual operations, time consumption, and material waste. This study was conducted to evaluate the production process of spinal orthoses produced by additive manufacturing, and to test the effects of 3D-printed braces on postural stability in patients with adolescent idiopathic scoliosis and osteogenesis imperfecta. Ten patients were recruited consecutively and were asked to wear a spinal orthosis produced by additive manufacturing for 2 weeks. The four phases of the production process for each brace were evaluated separately on a scale from 0 (not acceptable) to 3 (optimal). Postural stability in the unbraced and the two braced conditions (3D-printed and conventional) was assessed using validated metrics obtained from a wearable inertial sensor. The production process was evaluated as good in four cases, acceptable in five cases, and not acceptable in one case, due to problems in the printing phase. No statistically significant differences were observed in any of the postural balance metrics between the 3D-printed and conventional brace. On the other hand, postural balance metrics improved significantly with both types of braces with respect to the unbraced condition. Spinal orthoses produced with an innovative production process based on digital scans, CAD, and 3D printing are valid alternatives to conventionally produced orthoses, providing equivalent postural stability.
- Open Access
A Comparative Study for Material Selection in 3D Printing of Scoliosis Back Brace
In recent years, many research studies have focused on the application of 3D printing in the production of orthopaedic back braces. Several advantages, such as the ability to customise complex shapes, improved therapeutic effect and reduced production costs place this technology at the forefront in the ongoing evolution of the orthopaedic sector. In this work, four different materials, two of them poly(lactic acid) (PLA) and two of them poly(ethylene terephthalate glycol) (PETG), were characterised from a thermal, mechanical, rheological and morphological point of view. Our aim was to understand the effects of the material properties on the quality and functionality of a 3D-printed device. The specimens were cut from 3D-printed hemi-cylinders in two different orientation angles. Our results show that PETG-based samples have the best mechanical properties in terms of elastic modulus and elongation at break. The PLA-based samples demonstrated typical brittle behaviour, with elongation at break one order of magnitude lower. Impact tests demonstrated that the PETG-based samples had better properties in terms of energy absorption. Moreover, 3D-printed PETG samples demonstrated a better surface finishing with a more homogenous fibre–fibre interface. In summary, we demonstrate that the right choice of material and printing conditions are fundamental to satisfy the quality and functionality required for a scoliosis back brace.
Open AccessA Comparative Study for Material Selection in 3D Printing of Scoliosis Back Brace
In recent years, many research studies have focused on the application of 3D printing in the production of orthopaedic back braces. Several advantages, such as the ability to customise complex shapes, improved therapeutic effect and reduced production costs place this technology at the forefront in the ongoing evolution of the orthopaedic sector. In this work, four different materials, two of them poly(lactic acid) (PLA) and two of them poly(ethylene terephthalate glycol) (PETG), were characterised from a thermal, mechanical, rheological and morphological point of view. Our aim was to understand the effects of the material properties on the quality and functionality of a 3D-printed device. The specimens were cut from 3D-printed hemi-cylinders in two different orientation angles. Our results show that PETG-based samples have the best mechanical properties in terms of elastic modulus and elongation at break. The PLA-based samples demonstrated typical brittle behaviour, with elongation at break one order of magnitude lower. Impact tests demonstrated that the PETG-based samples had better properties in terms of energy absorption. Moreover, 3D-printed PETG samples demonstrated a better surface finishing with a more homogenous fibre–fibre interface. In summary, we demonstrate that the right choice of material and printing conditions are fundamental to satisfy the quality and functionality required for a scoliosis back brace.
- Open Access
- 20 March 2021
- Published by Springer Nature in Orphanet Journal of Rare Diseases
- Vol. 16 (1) , 1-16
A standard set of outcome measures for the comprehensive assessment of osteogenesis imperfecta
Background: Osteogenesis Imperfecta (OI) is a genetic disorder also known as ‘brittle bone disease’. The clinical manifestation of OI shows a wide variation. Therefore, care for patients with OI requires an interdisciplinary approach. The effectiveness of particular interventions and treatment protocols of interdisciplinary teams is not clear due to a non-standardized and wide variation of patient outcomes thus making the comparison of outcome measures available in the literature difficult. It is only by agreeing on a common, standard set of outcome measures for the comprehensive appraisal of OI that comparisons across interdisciplinary treatment centers for OI will be possible in the future. Methods: The Key4OI international interdisciplinary working group of 27 members used a consensus-driven modified Delphi approach to develop a set of global outcome measures for patients with OI. The International Classification of Functioning, Disability and Health (ICF), was used to define domains and organize the outcomes from the literature search. After reviewing the outcomes extracted from the literature, trials and registries, the working group agreed on a final selection of domains and their definition (ICF definition as well as a lay description). These domains were then presented to the focus groups who prioritized the outcome domains by taking into account the items important to the OI community. All content was collected and analyzed and final domains were determined. A consensus of appropriate measuring instruments for each domain was reached with Delphi rounds. The entire approach was in line with the International Consortium for Health Outcomes Measurement ICHOM methodology. Results: More than 400 different outcome measures were identified in our literature search. After three Delphi rounds, 24 domains were selected. After the focus group sessions, the number of domains were reduced to 15. A consensus was reached on the measuring instruments to cover these domains for both children and adults. Conclusion: The Key4OI project resulted in standard set of outcome measures focused on the needs and wishes of individuals with OI and their families. This outcome set will enable healthcare teams and systems to compare and to improve their care pathways and quality of care worldwide. Further studies are needed to evaluate the implementation of this standardized outcome set.
- 20 March 2021
- Published by Springer Nature in Orphanet Journal of Rare Diseases
- Vol. 16 (1) , 1-16
Open AccessA standard set of outcome measures for the comprehensive assessment of osteogenesis imperfecta
Background: Osteogenesis Imperfecta (OI) is a genetic disorder also known as ‘brittle bone disease’. The clinical manifestation of OI shows a wide variation. Therefore, care for patients with OI requires an interdisciplinary approach. The effectiveness of particular interventions and treatment protocols of interdisciplinary teams is not clear due to a non-standardized and wide variation of patient outcomes thus making the comparison of outcome measures available in the literature difficult. It is only by agreeing on a common, standard set of outcome measures for the comprehensive appraisal of OI that comparisons across interdisciplinary treatment centers for OI will be possible in the future. Methods: The Key4OI international interdisciplinary working group of 27 members used a consensus-driven modified Delphi approach to develop a set of global outcome measures for patients with OI. The International Classification of Functioning, Disability and Health (ICF), was used to define domains and organize the outcomes from the literature search. After reviewing the outcomes extracted from the literature, trials and registries, the working group agreed on a final selection of domains and their definition (ICF definition as well as a lay description). These domains were then presented to the focus groups who prioritized the outcome domains by taking into account the items important to the OI community. All content was collected and analyzed and final domains were determined. A consensus of appropriate measuring instruments for each domain was reached with Delphi rounds. The entire approach was in line with the International Consortium for Health Outcomes Measurement ICHOM methodology. Results: More than 400 different outcome measures were identified in our literature search. After three Delphi rounds, 24 domains were selected. After the focus group sessions, the number of domains were reduced to 15. A consensus was reached on the measuring instruments to cover these domains for both children and adults. Conclusion: The Key4OI project resulted in standard set of outcome measures focused on the needs and wishes of individuals with OI and their families. This outcome set will enable healthcare teams and systems to compare and to improve their care pathways and quality of care worldwide. Further studies are needed to evaluate the implementation of this standardized outcome set.
- Open Access
- 15 October 2020
- Published by Springer Nature in The International Journal of Advanced Manufacturing Technology
- Vol. 111 (5-6) , 1707-1720
3D printing orthopedic scoliosis braces: a test comparing FDM with thermoforming
In recent years, 3D printing gained considerable attention in the orthopedic sector. This work evaluates the feasibility of producing orthopedic scoliosis braces by 3D printing, comparing performance and costs with classical thermoforming procedures. Critical parameters, such as manufacture time, mechanical properties, weight, and comfort are carefully considered. Polyethylene terephthalate glycol-modified (PETG) was selected among the several filaments materials present on the market. Printed samples were analyzed with electronic microscope, tensile, and impact tests and compared with thermoformed polyethylene (PE) and polypropylene (PP) samples. Moreover, a cost analysis was carried out for the specific application. The thermoformed brace of a volunteer patient affected by scoliosis was reproduced using reverse-engineering techniques. The model was then printed as a single piece and postprocessed by an expert orthotist. Subsequently, the patient wore the brace in a pilot case to compare comfort and mechanical effectiveness. Results show that the 3D printing fabrication method is able to provide a valid alternative to the current fabrication methods, being also very competitive in terms of costs. The morphological analysis does not show critical defects in 3D printed samples, while the mechanical tests highlighted their anisotropy, with an overall brittleness of PETG samples in the direction orthogonal to the fibers. However, in terms of mechanical stresses, a back brace should never reach the polymer yield stress, otherwise the shape would be modified and the therapeutic effect could be compromised. Finally, the patient reported the perception of improved support and no significant comfort differences compared with the thermoformed brace.
- 15 October 2020
- Published by Springer Nature in The International Journal of Advanced Manufacturing Technology
- Vol. 111 (5-6) , 1707-1720
Open Access3D printing orthopedic scoliosis braces: a test comparing FDM with thermoforming
In recent years, 3D printing gained considerable attention in the orthopedic sector. This work evaluates the feasibility of producing orthopedic scoliosis braces by 3D printing, comparing performance and costs with classical thermoforming procedures. Critical parameters, such as manufacture time, mechanical properties, weight, and comfort are carefully considered. Polyethylene terephthalate glycol-modified (PETG) was selected among the several filaments materials present on the market. Printed samples were analyzed with electronic microscope, tensile, and impact tests and compared with thermoformed polyethylene (PE) and polypropylene (PP) samples. Moreover, a cost analysis was carried out for the specific application. The thermoformed brace of a volunteer patient affected by scoliosis was reproduced using reverse-engineering techniques. The model was then printed as a single piece and postprocessed by an expert orthotist. Subsequently, the patient wore the brace in a pilot case to compare comfort and mechanical effectiveness. Results show that the 3D printing fabrication method is able to provide a valid alternative to the current fabrication methods, being also very competitive in terms of costs. The morphological analysis does not show critical defects in 3D printed samples, while the mechanical tests highlighted their anisotropy, with an overall brittleness of PETG samples in the direction orthogonal to the fibers. However, in terms of mechanical stresses, a back brace should never reach the polymer yield stress, otherwise the shape would be modified and the therapeutic effect could be compromised. Finally, the patient reported the perception of improved support and no significant comfort differences compared with the thermoformed brace.
- Open Access
- 10 September 2018
- Published by Springer Nature in Orphanet Journal of Rare Diseases
- Vol. 13 (1) , 1-14
Consensus statement on physical rehabilitation in children and adolescents with osteogenesis imperfecta
On the occasion of the 13th International Conference on Osteogenesis imperfecta in August 2017 an expert panel was convened to develop an international consensus paper regarding physical rehabilitation in children and adolescents with Osteogenesis imperfecta. The experts were chosen based on their clinical experience with children with osteogenesis imperfecta and were identified by sending out questionnaires to specialized centers and patient organizations in 26 different countries. The final expert-group included 16 representatives (12 physiotherapists, two occupational therapists and two medical doctors) from 14 countries. Within the framework of a collation of personal experiences and the results of a literature search, the participating physiotherapists, occupational therapists and medical doctors formulated 17 expert-statements on physical rehabilitation in patients aged 0–18 years with osteogenesis imperfecta.
- 10 September 2018
- Published by Springer Nature in Orphanet Journal of Rare Diseases
- Vol. 13 (1) , 1-14
Open AccessConsensus statement on physical rehabilitation in children and adolescents with osteogenesis imperfecta
On the occasion of the 13th International Conference on Osteogenesis imperfecta in August 2017 an expert panel was convened to develop an international consensus paper regarding physical rehabilitation in children and adolescents with Osteogenesis imperfecta. The experts were chosen based on their clinical experience with children with osteogenesis imperfecta and were identified by sending out questionnaires to specialized centers and patient organizations in 26 different countries. The final expert-group included 16 representatives (12 physiotherapists, two occupational therapists and two medical doctors) from 14 countries. Within the framework of a collation of personal experiences and the results of a literature search, the participating physiotherapists, occupational therapists and medical doctors formulated 17 expert-statements on physical rehabilitation in patients aged 0–18 years with osteogenesis imperfecta.
- 26 August 2018
- Published by ASME International
Current and Future Manufacturing of Chest Orthoses, Considering the Case of Osteogenesis Imperfecta
The present paper aims at discussing the current manufacturing processes of chest orthoses, considering patients affected by Osteogenesis Imperfecta (OI) and a possible future scenario. OI is a genetic disease caused primarily by the genes responsible for collagen production. One of the most common symptoms among the groups of living subjects affected by OI is scoliosis, the abnormal deformation of the spine curvature. The non-invasive treatments for realigning the spine consist of both physical exercise and use of chest braces. The latter are strongly patient-dependent devices; thus, the level of customization is high. The production processes can be classified in: traditional, modern and research process. The first one consists of a sequence of manual operations on plaster casts and final orthoses. The modern process integrates CAD/CAM systems for the first phases of virtual 3D modeling and the automation of the cast production using milling robot, but maintaining the second part of the process. The research process considers the introduction of polymer Additive Manufacturing (AM) in substitution to the thermoforming. Advantages and disadvantages related to each process are discussed in relation to the OI problem.
- 26 August 2018
- Published by ASME International
Current and Future Manufacturing of Chest Orthoses, Considering the Case of Osteogenesis Imperfecta
The present paper aims at discussing the current manufacturing processes of chest orthoses, considering patients affected by Osteogenesis Imperfecta (OI) and a possible future scenario. OI is a genetic disease caused primarily by the genes responsible for collagen production. One of the most common symptoms among the groups of living subjects affected by OI is scoliosis, the abnormal deformation of the spine curvature. The non-invasive treatments for realigning the spine consist of both physical exercise and use of chest braces. The latter are strongly patient-dependent devices; thus, the level of customization is high. The production processes can be classified in: traditional, modern and research process. The first one consists of a sequence of manual operations on plaster casts and final orthoses. The modern process integrates CAD/CAM systems for the first phases of virtual 3D modeling and the automation of the cast production using milling robot, but maintaining the second part of the process. The research process considers the introduction of polymer Additive Manufacturing (AM) in substitution to the thermoforming. Advantages and disadvantages related to each process are discussed in relation to the OI problem.
- Open Access
- 30 May 2018
- Published by Copernicus GmbH in The International Archives of the Photogrammetry, Remote Sensing and Spatial Information Sciences
- Vol. XLII-2, 953-960
LOW-COST 3D DEVICES AND LASER SCANNERS COMPARISON FOR THE APPLICATION IN ORTHOPEDIC CENTRES
Low-cost 3D sensors are nowadays widely diffused and many different solutions are available on the market. Some of these devices were developed for entertaining purposes, but are used also for acquisition and processing of different 3D data with the aim of documentation, research and study. Given the fact that these sensors were not developed for this purpose, it is necessary to evaluate their use in the capturing process. This paper shows a preliminary research comparing the Kinect 1 and 2 by Microsoft, the Structure Sensor by Occipital and the O&P Scan by Rodin4D in a medical scenario (i.e. human body scans). In particular, these sensors were compared to Minolta Vivid 9i, chosen as reference because of its higher accuracy. Different test objects were analysed: a calibrated flat plane, for the evaluation of the systematic distance error for each device, and three different parts of a mannequin, used as samples of human body parts. The results showed that the use of a certified flat plane is a good starting point in characterizing the sensors, but a complete analysis with objects similar to the ones of the real context of application is required. For example, the Kinect 2 presented the best results among the low-cost sensors on the flat plane, while the Structure Sensor was more reliable on the mannequin parts.
- 30 May 2018
- Published by Copernicus GmbH in The International Archives of the Photogrammetry, Remote Sensing and Spatial Information Sciences
- Vol. XLII-2, 953-960
Open AccessLOW-COST 3D DEVICES AND LASER SCANNERS COMPARISON FOR THE APPLICATION IN ORTHOPEDIC CENTRES
Low-cost 3D sensors are nowadays widely diffused and many different solutions are available on the market. Some of these devices were developed for entertaining purposes, but are used also for acquisition and processing of different 3D data with the aim of documentation, research and study. Given the fact that these sensors were not developed for this purpose, it is necessary to evaluate their use in the capturing process. This paper shows a preliminary research comparing the Kinect 1 and 2 by Microsoft, the Structure Sensor by Occipital and the O&P Scan by Rodin4D in a medical scenario (i.e. human body scans). In particular, these sensors were compared to Minolta Vivid 9i, chosen as reference because of its higher accuracy. Different test objects were analysed: a calibrated flat plane, for the evaluation of the systematic distance error for each device, and three different parts of a mannequin, used as samples of human body parts. The results showed that the use of a certified flat plane is a good starting point in characterizing the sensors, but a complete analysis with objects similar to the ones of the real context of application is required. For example, the Kinect 2 presented the best results among the low-cost sensors on the flat plane, while the Structure Sensor was more reliable on the mannequin parts.
- 15 May 2018
- Published by Wiley in Pediatric Pulmonology
- Vol. 53 (7) , 964-972
Ribcage deformity and the altered breathing pattern in children with osteogenesis imperfecta
Aim: Osteogenesis Imperfecta (OI) is a genetic disease characterized by bones fragility and progressive deformity. Life expectancy is reduced in the non‐lethal most severe type III form before the age of 10 years. The main cause of death in OI is respiratory insufficiency resulting from impaired thoracic function worsened by ribcage deformity and scoliosis.Methods: We used opto‐electronic plethysmography to study chest geometry, the ventilatory, and the thoraco‐abdominal pattern at rest in supine position in children younger than 10 years. Radiographic measurements were used to describe spinal deformity.Results: Eight severe OI (sOI), seven affected by other moderate forms (mOI), and nine healthy controls (CTR) were analyzed. sOI were characterized by Pectus carinatum (sternal angle: 165.2°, CTR: 183.1°; P < 0.01), rapid and shallow breathing (RSBi: 267.4 L−1 min−1, CTR: 150.7 L−1 min−1; P < 0.05) and reduced pulmonary rib cage contribution to tidal volume (5.1%, CTR: 14.6%; P < 0.001) that evolved with age approaching the paradoxical inspiratory inward movement previously found in adults. mOI showed almost normal ventilatory pattern (RSBi: 189.2−1 min−1) and absence of sternal deformity (sternal angle: 176.8°). Platyspondyly and kyphosis were common features in all OI children.Conclusion: An altered breathing pattern in severe OI is present since childhood and it worsens with age. This is caused by the combination of pectus carinatum, brittle ribs and spinal deformity that put the ribcage muscles in mechanical disadvantage. These results suggest that in severe OI the assessment of the respiratory function should start in early childhood in order to try to reduce the incidence of premature death.
- 15 May 2018
- Published by Wiley in Pediatric Pulmonology
- Vol. 53 (7) , 964-972
Ribcage deformity and the altered breathing pattern in children with osteogenesis imperfecta
Aim: Osteogenesis Imperfecta (OI) is a genetic disease characterized by bones fragility and progressive deformity. Life expectancy is reduced in the non‐lethal most severe type III form before the age of 10 years. The main cause of death in OI is respiratory insufficiency resulting from impaired thoracic function worsened by ribcage deformity and scoliosis.Methods: We used opto‐electronic plethysmography to study chest geometry, the ventilatory, and the thoraco‐abdominal pattern at rest in supine position in children younger than 10 years. Radiographic measurements were used to describe spinal deformity.Results: Eight severe OI (sOI), seven affected by other moderate forms (mOI), and nine healthy controls (CTR) were analyzed. sOI were characterized by Pectus carinatum (sternal angle: 165.2°, CTR: 183.1°; P < 0.01), rapid and shallow breathing (RSBi: 267.4 L−1 min−1, CTR: 150.7 L−1 min−1; P < 0.05) and reduced pulmonary rib cage contribution to tidal volume (5.1%, CTR: 14.6%; P < 0.001) that evolved with age approaching the paradoxical inspiratory inward movement previously found in adults. mOI showed almost normal ventilatory pattern (RSBi: 189.2−1 min−1) and absence of sternal deformity (sternal angle: 176.8°). Platyspondyly and kyphosis were common features in all OI children.Conclusion: An altered breathing pattern in severe OI is present since childhood and it worsens with age. This is caused by the combination of pectus carinatum, brittle ribs and spinal deformity that put the ribcage muscles in mechanical disadvantage. These results suggest that in severe OI the assessment of the respiratory function should start in early childhood in order to try to reduce the incidence of premature death.
- 1 June 2005
- Vol. 41 (2) , 183-201
Italian guidelines on rehabilitation treatment of adolescents with scoliosis or other spinal deformities.
- 1 June 2005
- Vol. 41 (2) , 183-201
Italian guidelines on rehabilitation treatment of adolescents with scoliosis or other spinal deformities.
- 1 November 2000
- Published by Springer Nature in Pediatric Drugs
- Vol. 2 (6) , 465-488
Osteogenesis Imperfecta
Osteogenesis imperfecta (OI), an inherited connective tissue disorder of remarkable clinical variability, is caused by a quantitative or qualitative defect in collagen synthesis and is characterised by bone fragility. The number of fractures and deformities, and the age at which they begin greatly influence the prognosis and the achievement of walking and autonomy. A multidisciplinary team approach is essential for diagnosis, for communication with patient and parents, and to tailor treatment needs to the severity of the disease and the age of the patient. Three types of treatment are available: nonsurgical management (physical therapy, rehabilitation, bracing and splinting), surgery (intramedullary rod positioning, spinal and basilar impression surgery), and drugs to increase the strength of bone and decrease the number of fractures. An aggressive rehabilitative approach is indicated to optimise functional ability and walking capacity; appropriately timed surgery to insert intramedullary rods provides improved function of extremities. Despite a high rate of complications, intramedullary telescopic roding has proven to be the most successful method for preventing and correcting fractures and deformities of long bones, improving walking capability and leading to successful rehabilitation of even severely affected patients. Surgery may be required in patients with progressive spinal deformity and in those with symptomatic basilar impression. Hearing function, dentinogenesis imperfecta, cardiac and respiratory function, and neurological changes must be monitored. The causal defect of the disease cannot be corrected with medical treatment and, currently, only symptomatic therapy is available. In recent years growth hormone (GH) and bisphosphonate agents have been used in OI therapy. GH is beneficial in patients with moderate forms of OI, showing a positive effect on bone turnover, bone mineral density and height velocity rate. Bisphosphonates have proved beneficial in children with severe OI, increasing bone mineral density and reducing the fracture rate and pain with no adverse effects reported. These data require confirmation in double-blind controlled studies; however, bisphosphonates have markedly improved morbidity in patients with OI. Future developments in genetic therapy may be directed towards either replacing cells carrying the mutant gene with normal cells or silencing the mutant allele using antisense suppression therapy, thus transforming a biochemically severe form of OI into a mild form.
- 1 November 2000
- Published by Springer Nature in Pediatric Drugs
- Vol. 2 (6) , 465-488
Osteogenesis Imperfecta
Osteogenesis imperfecta (OI), an inherited connective tissue disorder of remarkable clinical variability, is caused by a quantitative or qualitative defect in collagen synthesis and is characterised by bone fragility. The number of fractures and deformities, and the age at which they begin greatly influence the prognosis and the achievement of walking and autonomy. A multidisciplinary team approach is essential for diagnosis, for communication with patient and parents, and to tailor treatment needs to the severity of the disease and the age of the patient. Three types of treatment are available: nonsurgical management (physical therapy, rehabilitation, bracing and splinting), surgery (intramedullary rod positioning, spinal and basilar impression surgery), and drugs to increase the strength of bone and decrease the number of fractures. An aggressive rehabilitative approach is indicated to optimise functional ability and walking capacity; appropriately timed surgery to insert intramedullary rods provides improved function of extremities. Despite a high rate of complications, intramedullary telescopic roding has proven to be the most successful method for preventing and correcting fractures and deformities of long bones, improving walking capability and leading to successful rehabilitation of even severely affected patients. Surgery may be required in patients with progressive spinal deformity and in those with symptomatic basilar impression. Hearing function, dentinogenesis imperfecta, cardiac and respiratory function, and neurological changes must be monitored. The causal defect of the disease cannot be corrected with medical treatment and, currently, only symptomatic therapy is available. In recent years growth hormone (GH) and bisphosphonate agents have been used in OI therapy. GH is beneficial in patients with moderate forms of OI, showing a positive effect on bone turnover, bone mineral density and height velocity rate. Bisphosphonates have proved beneficial in children with severe OI, increasing bone mineral density and reducing the fracture rate and pain with no adverse effects reported. These data require confirmation in double-blind controlled studies; however, bisphosphonates have markedly improved morbidity in patients with OI. Future developments in genetic therapy may be directed towards either replacing cells carrying the mutant gene with normal cells or silencing the mutant allele using antisense suppression therapy, thus transforming a biochemically severe form of OI into a mild form.