HDHoang-Long Du

Hoang-Long Du

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Hoang-Long Du has a total of 88 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • High-selectivity nitrogen electroreduction to ammonia at near-ambient pressure

    by Hoang-Long Du, Duong T. H. Truong, Karolina Matuszek, Ngoc-Trung Nguyen, Rebecca Y. Hodgetts, Khang Ngoc Dinh, Thi Mung Vu, Shohreh Moshtari Khah, Peter Strasser, Ulrich Hintermair, et al.

    An advanced electrolyte and N 2 bubbling enable formation of a LiF/Li 2 S n -rich SEI, supporting high-performance Li-NRR at near-ambient pressure in the presence of water.


  • Open Access

    The Promise and Challenges of Ammonia Electrosynthesis From Dinitrogen and Water Using an Electrochemical Palladium Membrane

    by Ngoc‐Trung Nguyen, Dinh‐Duong Pham, Duong T. H. Truong, Dijon A. Hoogeveen, Mazin Al‐Alawi, Thi Mung Vu, Koustav Banerjee, Sebastian O. Fürer, Peter Strasser, Hoang‐Long Du, et al.

    Sustainable ammonia production can be achieved via an electrochemical process coupling the lithium redox‐mediated nitrogen reduction (Li‐NRR) with hydrogen oxidation, but a more practical approach uses water oxidation (the oxygen evolution reaction; OER) as the anode reaction. However, coupling the Li‐NRR and the OER is restricted by incompatibility of the anhydrous conditions required for nitrogen reduction with water. Aiming to resolve this, we investigated an electrolyser with an electrochemical palladium‐based membrane, which transforms protons generated by the OER to palladium hydride in aqueous media and releases protons into non‐aqueous Li‐NRR media to sustain ammonia production. The hydride formation/oxidation mechanism, validated through experiments with deuterated water, ensures exclusive membrane selectivity to protons, and is facilitated by the palladium‐gold electrocatalysts. We demonstrate ammonia electrosynthesis from nitrogen (15 bar) and water at a faradaic efficiency of 59 ± 4%, yield rate of 20 ± 1 nmol s −1 cm −2 and energy efficiency of 9.0 ± 0.7% over more than two days. However, deeper investigation of the system revealed ammonia‐promoted corrosion of the palladium‐based membrane—a challenge that needs to be addressed in the future developments of this technology.

  • Open Access

    The Promise and Challenges of Ammonia Electrosynthesis From Dinitrogen and Water Using an Electrochemical Palladium Membrane

    by Ngoc‐Trung Nguyen, Dinh‐Duong Pham, Duong T. H. Truong, Dijon A. Hoogeveen, Mazin Al‐Alawi, Thi Mung Vu, Koustav Banerjee, Sebastian O. Fürer, Peter Strasser, Hoang‐Long Du, et al.

    Sustainable ammonia production can be achieved via an electrochemical process coupling the lithium redox‐mediated nitrogen reduction (Li‐NRR) with hydrogen oxidation, but a more practical approach uses water oxidation (the oxygen evolution reaction; OER) as the anode reaction. However, coupling the Li‐NRR and the OER is restricted by incompatibility of the anhydrous conditions required for nitrogen reduction with water. Aiming to resolve this, we investigated an electrolyser with an electrochemical palladium‐based membrane, which transforms protons generated by the OER to palladium hydride in aqueous media and releases protons into non‐aqueous Li‐NRR media to sustain ammonia production. The hydride formation/oxidation mechanism, validated through experiments with deuterated water, ensures exclusive membrane selectivity to protons, and is facilitated by the palladium‐gold electrocatalysts. We demonstrate ammonia electrosynthesis from nitrogen (15 bar) and water at a faradaic efficiency of 59 ± 4%, yield rate of 20 ± 1 nmol s −1 cm −2 and energy efficiency of 9.0 ± 0.7% over more than two days. However, deeper investigation of the system revealed ammonia‐promoted corrosion of the palladium‐based membrane—a challenge that needs to be addressed in the future developments of this technology.

  • Open Access

    Opportunities and Challenges of the Electrosynthesis of Nitrites and Nitrates From Ammonia

    by Thi Mung Vu, Felipe Matamala‐Troncoso, Douglas R. MacFarlane, Hoang‐Long Du, Alexandr N. Simonov

    Electrochemical ammonia oxidation can enable sustainable, distributed synthesis of nitrite and nitrate powered by renewable energy, as an alternative to the centralized Ostwald process. However, the catalyst‐centered research struggles to produce ammonia electrooxidation systems delivering faradaic efficiency, yield rates, selectivity, and stability required for industrial implementation. This perspective aims to explore why current strategies fall short, revealing fundamental constraints that could not be resolved by the catalyst design alone so far. Practical nitrite/nitrate yield rates require potentials where oxygen evolution dominates, while harsh operational conditions inevitably cause corrosion of most materials. We suggest that further progress requires an integrated approach at the overall system level, rather than catalyst design under model conditions, and translating studies of the catalytic and degradation mechanisms into a practical operational environment. In turn, this requires electrolyser architectures suitable for robust high‐current operation. This article aims to propose future research directions that might address these limitations.

  • Open Access

    Ordered Ionic‐Liquid Channels Enable Fast Anhydrous Proton Conduction at up to 240°C for Fuel Cells

    by Mazin Al‐Alawi, Kaiqiang He, Mattia Belotti, Fanmengjing Wang, Jiffin Oommen, Douglas R. MacFarlane, Hoang‐Long Du, Alexandr N. Simonov, Huanting Wang

    Intermediate‐temperature electrochemical technologies offer a range of important advantages but require high‐performance and robust anhydrous proton exchange membranes. Herein, we demonstrate that confinement of phosphonium‐, imidazolium‐, and sulphonium‐based ionic liquids (ILs), within channels formed by stacked monolayers of boron nitride and graphene nanosheets functionalised with polyethyleneimine, provides robust and effective proton conductivity while suppressing bulk diffusion of the IL ions. We propose that the positively charged nanosheets might induce spatial ionic ordering, anchoring anions near the channel walls while concentrating protons and cations along the central region to establish parallel, continuous pathways for rapid proton transfer under anhydrous conditions. The resulting solid‐state composite membranes exhibit stable anhydrous proton conductivities of up to 10 −2 S cm − 1 at 240 ± 1°C, outperforming many existing IL‐based and polymer‐based systems. When integrated into hydrogen‐oxygen fuel cells, the [EMIM][NTf 2 ]‐based membrane enables a peak power density of 82 ± 5 mW cm −2 under anhydrous conditions at 240 ± 1°C and atmospheric pressure. In a broader context, this work presents a strategy for the design of membranes with properties tailored to a specific application, which can be achieved by tuning chemical structures of the confined IL and/or functional layers within the 2D channels.

  • Open Access

    Ordered Ionic‐Liquid Channels Enable Fast Anhydrous Proton Conduction at up to 240°C for Fuel Cells

    by Mazin Al‐Alawi, Kaiqiang He, Mattia Belotti, Fanmengjing Wang, Jiffin Oommen, Douglas R. MacFarlane, Hoang‐Long Du, Alexandr N. Simonov, Huanting Wang

    Intermediate‐temperature electrochemical technologies offer a range of important advantages but require high‐performance and robust anhydrous proton exchange membranes. Herein, we demonstrate that confinement of phosphonium‐, imidazolium‐, and sulphonium‐based ionic liquids (ILs), within channels formed by stacked monolayers of boron nitride and graphene nanosheets functionalised with polyethyleneimine, provides robust and effective proton conductivity while suppressing bulk diffusion of the IL ions. We propose that the positively charged nanosheets might induce spatial ionic ordering, anchoring anions near the channel walls while concentrating protons and cations along the central region to establish parallel, continuous pathways for rapid proton transfer under anhydrous conditions. The resulting solid‐state composite membranes exhibit stable anhydrous proton conductivities of up to 10 −2 S cm − 1 at 240 ± 1°C, outperforming many existing IL‐based and polymer‐based systems. When integrated into hydrogen‐oxygen fuel cells, the [EMIM][NTf 2 ]‐based membrane enables a peak power density of 82 ± 5 mW cm −2 under anhydrous conditions at 240 ± 1°C and atmospheric pressure. In a broader context, this work presents a strategy for the design of membranes with properties tailored to a specific application, which can be achieved by tuning chemical structures of the confined IL and/or functional layers within the 2D channels.

  • Selective Electrolysis of Water Under Artificial Seawater Conditions Using Transition Metal Borate Anodes (Adv. Energy Mater. 18/2026)

    by Ananta R. Fareza, Hank Garg, Luis Miguel Azofra, Darcy Simondson, Tam D. Nguyen, Mohamed R. Rizk, Khang N. Dinh, Rosalie K. Hocking, Douglas R. MacFarlane, Hoang‐Long Du, et al.

  • Mass-Transport Effects in the Lithium Redox-Mediated Nitrogen Reduction Reaction

    by Ngoc-Trung Nguyen, Syed Asad Abbas, Andrew Nattestad, Peter Strasser, Douglas R. MacFarlane, Hoang-Long Du, Alexandr N. Simonov

    Design of high-performance ammonia electrosynthesis systems based on the lithium redox-mediated nitrogen reduction reaction (Li-NRR) requires an understanding of the interplay between the reaction kinetics and mass transport. To advance this currently insufficient understanding, we developed a wall-jet electrode flow cell and used it to investigate the Li-NRR and key processes occurring in the system, namely, the reduction of Li+, formation of Li3N and LiH, and protonation of the lithium-based electrodeposits, as a function of mass-transport conditions. The effects of the latter were found to be electrolyte-dependent when tetrahydrofuran was used as a solvent and 0.1 M C2H5OH as a proton carrier. In 1 M LiBF4, the Li-NRR showed high mass-transport sensitivity, achieving the highest faradaic efficiency of 75 ± 2% when the optimal Li3N-to-LiH ratio was provided. The performance with 2 M LiNTf2 was also defined by the Li3N:LiH ratio but followed opposite dependencies on the flow rate as compared to LiBF4. The overall reduction rate with 2 M LiNTf2 exhibited minimal sensitivity to mass transport, likely due to the intensified passivation of the cathode at high flow rates. The 1 M LiNTf2 electrolyte demonstrated pronounced effects of the mass transport on the overall reduction rate, which, however, was dominated by side reactions rather than the Li-NRR under examined conditions. Our study shows that intensifying mass transport only cannot improve the ammonia production rates while maintaining high faradaic efficiency. Adjusting the electrolyte solution flow rate in the Li-NRR systems necessitates reoptimization of N2 pressure, proton carrier concentration, and/or electrolyte composition.


  • Open Access

    Selective Electrolysis of Water Under Artificial Seawater Conditions Using Transition Metal Borate Anodes

    by Ananta R. Fareza, Hank Garg, Luis Miguel Azofra, Darcy Simondson, Tam D. Nguyen, Mohamed R. Rizk, Khang N. Dinh, Rosalie K. Hocking, Douglas R. MacFarlane, Hoang‐Long Du, et al.

    Direct seawater electrolysis overcomes one major hurdle in sustainable hydrogen production, viz. the requirement to use high‐purity water, which is currently a scarce resource for ∼80% of the global population. On the other hand, the natural composition of seawater makes it unsuitable for direct use in conventional electrolyzer systems, primarily due to the occurrence of the chlorine evolution reaction (CER) at the anode, instead of the desired oxygen evolution reaction (OER), and the build‐up of insulating Mg 2+ /Ca 2+ hydroxides at the cathode. Herein, we present an electrolyzer fed with artificial seawater with no added electrolyte and enabling selective splitting of H 2 O, rather than H 2 generation coupled to the CER. This selectivity was provided by the anodes derived from a cobalt iron boride material, which was predicted to favor the OER rather than the CER by the density functional theory calculations. The compact design of the electrode‐separator assembly suppressed the cathodic Mg/Ca(OH) 2 precipitation. Robust operation of the electrolyzer over one week was demonstrated at 100 mA cm −2 with a cell voltage of ca. –2.6 V at 80 ± 1°C. These operating conditions were selected based on a preliminary techno‐economic analysis as a realistic benchmark for cost‐competitive hydrogen production.


  • Ammonia-Promoted Lithium Redox-Mediated Nitrogen Reduction

    by Koustav Banerjee, Duong T. H. Truong, Darcy Simondson, Ngoc Trung Nguyen, Cuong K. Nguyen, Cameron L. Bentley, Rebecca Y. Hodgetts, Douglas R. Macfarlane, Hoang-Long Du, Alexandr N. Simonov