Vetle Vinje
Research Subjects
Vetle Vinje has a total of 33 co-authors. Here are the top co-authors by number of shared publications:
- Einar Iversen
University of Bergen 4 , Department of Earth Science, Bergen, Norway
3 shared publications - Gordon Poole
CGG Services (UK) Ltd 2 , Crompton Way, Crawley, West Sussex, UK
3 shared publications - Jan Erik Lie
Lundin Norway
2 shared publications Leiv-J Gelius
University of Oslo 4 , Department of Geosciences, Oslo, Norway
2 shared publicationsPhilip Ringrose
Center for Geophysical Forecasting 2 Trondheim , .
2 shared publications- Saskia Tschache
CGG 1 , Crawley, UK and , Department of Earth Science, Bergen, Norway
2 shared publications
Latest Publications
- Open Access
- 18 February 2026
- Published by Society of Exploration Geophysicists in Interpretation
- Vol. 14 (2) , T163-T183
Unraveling multilayer CO2 plumes using the entire wavefield: Case study from the Sleipner storage site
In this study, full-waveform inversion (FWI) was applied to a subset of nodes from a 4-component (4C), full-azimuth, ocean-bottom-node seismic survey deployed over the Sleipner site in 2023. The inversion uses frequencies up to 70 Hz, which are the highest frequencies used at inverting for the velocity structure of the Sleipner plume. For the first time, a velocity model was obtained that resolves all the known carbon dioxide (CO2) accumulations at Sleipner (9 layers) and many of the vertical/subvertical feeders that connect the CO2 accumulations. The derived velocity model enables the discovery of new feeders and confirms other feeders and small accumulations that were suspected from previous 4D reflection studies and recent FWI analyses. By comparing our FWI results using the 2023 data with high-quality FWI results using the 2010 data, the evolution of the CO2 plume in the past decade was mapped, enabling the assessment of CO2 layers and feeders over time. Our FWI velocity model gives new insights into the nature of CO2 migration at this storage site, confirming that geologic heterogeneity is the main feature controlling the migration pathways. Major factors influencing the vertical migration of CO2 are channel margins and faults developed over the channel margins due to differential compaction of the channel sands compared to the background sediments. These migration pathways connect the observed fill-to-spill microaccumulations found within the Utsira Sandstone. Our analysis suggests that, by August 2023, the CO2 plume occupies 0.1546 × 10⁹ ± 0.0192 × 10⁹ m3, comprising 19.63 ± 4.05 Mt. This value agrees closely with 19.1 Mt reported by the Norwegian Offshore Directorate, highlighting the value of FWI as a tool for CO2 storage verification. As a contribution to a cost-effective monitoring toolbox, this study demonstrates the value of high-frequency, 3D FWI for monitoring CO2 migration in shallow, heterogeneous aquifers.
- 18 February 2026
- Published by Society of Exploration Geophysicists in Interpretation
- Vol. 14 (2) , T163-T183
Open AccessUnraveling multilayer CO2 plumes using the entire wavefield: Case study from the Sleipner storage site
In this study, full-waveform inversion (FWI) was applied to a subset of nodes from a 4-component (4C), full-azimuth, ocean-bottom-node seismic survey deployed over the Sleipner site in 2023. The inversion uses frequencies up to 70 Hz, which are the highest frequencies used at inverting for the velocity structure of the Sleipner plume. For the first time, a velocity model was obtained that resolves all the known carbon dioxide (CO2) accumulations at Sleipner (9 layers) and many of the vertical/subvertical feeders that connect the CO2 accumulations. The derived velocity model enables the discovery of new feeders and confirms other feeders and small accumulations that were suspected from previous 4D reflection studies and recent FWI analyses. By comparing our FWI results using the 2023 data with high-quality FWI results using the 2010 data, the evolution of the CO2 plume in the past decade was mapped, enabling the assessment of CO2 layers and feeders over time. Our FWI velocity model gives new insights into the nature of CO2 migration at this storage site, confirming that geologic heterogeneity is the main feature controlling the migration pathways. Major factors influencing the vertical migration of CO2 are channel margins and faults developed over the channel margins due to differential compaction of the channel sands compared to the background sediments. These migration pathways connect the observed fill-to-spill microaccumulations found within the Utsira Sandstone. Our analysis suggests that, by August 2023, the CO2 plume occupies 0.1546 × 10⁹ ± 0.0192 × 10⁹ m3, comprising 19.63 ± 4.05 Mt. This value agrees closely with 19.1 Mt reported by the Norwegian Offshore Directorate, highlighting the value of FWI as a tool for CO2 storage verification. As a contribution to a cost-effective monitoring toolbox, this study demonstrates the value of high-frequency, 3D FWI for monitoring CO2 migration in shallow, heterogeneous aquifers.
- Open Access
- 1 January 2024
- Published by Elsevier in SSRN Electronic Journal
Estimating the Multi-Scale Distribution of Co2 Using Seismic Data at Sleipner
Seismic data at the Sleipner CO2 storage project are used to gain insights into the spatial distribution of CO2, revealing the fraction of the pore volume occupied by CO2 at different scales. The CO2 storage capacity coefficient (Cc) is determined and then scaled by estimates of the fractional area and fractional volume occupied by CO2 to determine a volume storage coefficient, Vc. Estimates of Vc are close to the independently determined maximum layer saturations for the case CO2 columns under conditions of gravity equilibrium. The analysis is useful for understanding the nature of CO2 storage efficiency measures and for storage capacity estimates in general. The methods were applied to a dataset derived from time-lapse RMS amplitude difference maps for 9 repeat surveys (1999-2020), and then compared to an FWI velocity model of the 2010 survey, which allowed a layer-by-layer analysis. The macroscopic storage efficiency at Sleipner is found be in in the range of 1-6% depending on the reference pore volume used in the analysis, while the fraction of the pore space occupied by CO2 within each layer is found to lie in range of 30% and 60%. The methods proposed here have the potential to significantly improve the quantitative analysis of seismic data used for monitoring CO2 storage sites.
- 1 January 2024
- Published by Elsevier in SSRN Electronic Journal
Open AccessEstimating the Multi-Scale Distribution of Co2 Using Seismic Data at Sleipner
Seismic data at the Sleipner CO2 storage project are used to gain insights into the spatial distribution of CO2, revealing the fraction of the pore volume occupied by CO2 at different scales. The CO2 storage capacity coefficient (Cc) is determined and then scaled by estimates of the fractional area and fractional volume occupied by CO2 to determine a volume storage coefficient, Vc. Estimates of Vc are close to the independently determined maximum layer saturations for the case CO2 columns under conditions of gravity equilibrium. The analysis is useful for understanding the nature of CO2 storage efficiency measures and for storage capacity estimates in general. The methods were applied to a dataset derived from time-lapse RMS amplitude difference maps for 9 repeat surveys (1999-2020), and then compared to an FWI velocity model of the 2010 survey, which allowed a layer-by-layer analysis. The macroscopic storage efficiency at Sleipner is found be in in the range of 1-6% depending on the reference pore volume used in the analysis, while the fraction of the pore space occupied by CO2 within each layer is found to lie in range of 30% and 60%. The methods proposed here have the potential to significantly improve the quantitative analysis of seismic data used for monitoring CO2 storage sites.
- 7 September 2023
- Published by Society of Exploration Geophysicists in Interpretation
- Vol. 12 (1) , T1-T15
Estimation of net-to-gross ratio and net pay from seismic amplitude-variation-with-offset using Bayesian inversion
Net-to-gross ratio (N/G) and net pay are essential properties for characterizing turbidite reservoirs. We present a Bayesian inversion that estimates the probability density distributions of the reservoir properties from the amplitude-variation-with-offset (AVO) attributes intercept and gradient, which are measured at the top of the reservoir. The method is adapted to the region-specific characteristics of the sand-shale interbedding as observed from well data. The likelihood function is estimated by a Monte Carlo simulation, which involves generating pseudowells, seismic modeling using the reflectivity method, picking the amplitudes at the top of the reservoir, and estimating the AVO intercept and gradient. In a North Sea oil field case example, the AVO gradient is most sensitive to variations in the net-to-gross ratio, whereas the AVO intercept is most sensitive to the type of pore fluid. The inversion was successfully tested on pseudowells and synthetic seismic AVO from well data. We show that the inversion can be applied to AVO maps to produce maps of the most likely estimates of the N/G and the net-pay-to-net ratio, the resulting net pay, and the uncertainty.
- 7 September 2023
- Published by Society of Exploration Geophysicists in Interpretation
- Vol. 12 (1) , T1-T15
Estimation of net-to-gross ratio and net pay from seismic amplitude-variation-with-offset using Bayesian inversion
Net-to-gross ratio (N/G) and net pay are essential properties for characterizing turbidite reservoirs. We present a Bayesian inversion that estimates the probability density distributions of the reservoir properties from the amplitude-variation-with-offset (AVO) attributes intercept and gradient, which are measured at the top of the reservoir. The method is adapted to the region-specific characteristics of the sand-shale interbedding as observed from well data. The likelihood function is estimated by a Monte Carlo simulation, which involves generating pseudowells, seismic modeling using the reflectivity method, picking the amplitudes at the top of the reservoir, and estimating the AVO intercept and gradient. In a North Sea oil field case example, the AVO gradient is most sensitive to variations in the net-to-gross ratio, whereas the AVO intercept is most sensitive to the type of pore fluid. The inversion was successfully tested on pseudowells and synthetic seismic AVO from well data. We show that the inversion can be applied to AVO maps to produce maps of the most likely estimates of the N/G and the net-pay-to-net ratio, the resulting net pay, and the uncertainty.
- 23 January 2023
- Published by Society of Exploration Geophysicists in Interpretation
- Vol. 11 (2) , T313-T327
Quantifying amplitude-variation-with-offset uncertainties related to calcite-cemented beds using a Monte Carlo simulation
Calcite cement often occurs locally, forming thin layers of calcite-cemented sandstone characterized by high seismic velocities and densities. Because of their strong impedance contrast with the surrounding rock, calcite-cemented intervals produce detectable seismic reflection signals that may interfere with target reflections at the top of a reservoir. In this case, the amplitude-variation-with-offset (AVO) of the effective seismic signature will be altered and may even create a false hydrocarbon indication. From the Monte Carlo simulation, we find that the presence of thin calcite-cemented beds increases the uncertainty of the Bayesian pore-fluid classification based on the AVO attributes intercept and gradient. In the case example of a North Sea turbiditic oil and gas field, the probability of a false-positive hydrocarbon indication increases from 3%–5% to 18%–21% assuming an equal probability of the occurrence of brine, oil, and gas. The results confirm that calcite-cemented beds can create a pitfall in AVO analysis. Realistic estimates of the AVO uncertainty are crucial for the risk assessment of well placement decisions.
- 23 January 2023
- Published by Society of Exploration Geophysicists in Interpretation
- Vol. 11 (2) , T313-T327
Quantifying amplitude-variation-with-offset uncertainties related to calcite-cemented beds using a Monte Carlo simulation
Calcite cement often occurs locally, forming thin layers of calcite-cemented sandstone characterized by high seismic velocities and densities. Because of their strong impedance contrast with the surrounding rock, calcite-cemented intervals produce detectable seismic reflection signals that may interfere with target reflections at the top of a reservoir. In this case, the amplitude-variation-with-offset (AVO) of the effective seismic signature will be altered and may even create a false hydrocarbon indication. From the Monte Carlo simulation, we find that the presence of thin calcite-cemented beds increases the uncertainty of the Bayesian pore-fluid classification based on the AVO attributes intercept and gradient. In the case example of a North Sea turbiditic oil and gas field, the probability of a false-positive hydrocarbon indication increases from 3%–5% to 18%–21% assuming an equal probability of the occurrence of brine, oil, and gas. The results confirm that calcite-cemented beds can create a pitfall in AVO analysis. Realistic estimates of the AVO uncertainty are crucial for the risk assessment of well placement decisions.
- 15 February 2022
- Published by Society of Exploration Geophysicists in Geophysics
- Vol. 87 (3) , V215-V226
Deep learning-based shot-domain seismic deblending
To streamline the fast-track processing of large data volumes, we have developed a deep learning approach to deblend seismic data in the shot domain based on a practical strategy for generating high-quality training data along with a list of data conditioning techniques to improve the performance of the data-driven model. We make use of unblended shot gathers acquired at the end of each sail line, to which the access requires no additional time or labor costs beyond the blended acquisition. By manually blending these data, we obtain training data that are fully adapted to the given survey, while having good control of their ground truth. Furthermore, we train a deep neural network using multichannel inputs that include adjacent blended shot gathers as additional channels. The prediction of the blending noise is added in as a related and auxiliary task with the main task of the network being the prediction of the primary-source events. Blending noise in the ground truth is scaled down during the training and validation process due to its excessively strong amplitudes. As part of the process, the to-be-deblended shot gathers are aligned by the blending noise. Implementation of field blended-by-acquisition data demonstrates that introducing the suggested data conditioning steps can considerably reduce the leakage of primary-source events in the deep part of the blended section. The complete proposed approach performs almost as well as a conventional algorithm in the shallow section and finds a great advantage in efficiency. It performs slightly worse for larger traveltimes, but it still removes the blending noise efficiently.
- 15 February 2022
- Published by Society of Exploration Geophysicists in Geophysics
- Vol. 87 (3) , V215-V226
Deep learning-based shot-domain seismic deblending
To streamline the fast-track processing of large data volumes, we have developed a deep learning approach to deblend seismic data in the shot domain based on a practical strategy for generating high-quality training data along with a list of data conditioning techniques to improve the performance of the data-driven model. We make use of unblended shot gathers acquired at the end of each sail line, to which the access requires no additional time or labor costs beyond the blended acquisition. By manually blending these data, we obtain training data that are fully adapted to the given survey, while having good control of their ground truth. Furthermore, we train a deep neural network using multichannel inputs that include adjacent blended shot gathers as additional channels. The prediction of the blending noise is added in as a related and auxiliary task with the main task of the network being the prediction of the primary-source events. Blending noise in the ground truth is scaled down during the training and validation process due to its excessively strong amplitudes. As part of the process, the to-be-deblended shot gathers are aligned by the blending noise. Implementation of field blended-by-acquisition data demonstrates that introducing the suggested data conditioning steps can considerably reduce the leakage of primary-source events in the deep part of the blended section. The complete proposed approach performs almost as well as a conventional algorithm in the shallow section and finds a great advantage in efficiency. It performs slightly worse for larger traveltimes, but it still removes the blending noise efficiently.
- 22 September 2021
- Published by Society of Exploration Geophysicists in Geophysics
- Vol. 87 (1) , V1-V14
Debubbling seismic data using a generalized neural network
Estimating the far-field source signature has always been an important part of seismic processing. However, estimating the source signature from an air-gun array is difficult because of the complex interaction between the air bubble oscillations from each air gun, the state of the sea surface, variations in air pressure, the air guns’ geometry, etc. Removing the bubble noise is important because proper seismic imaging requires a zero-phased, spiky wavelet. Debubbling has conventionally been done by deconvolution using an (assumed) known source signature. Several methods to estimate the signature and debubble the data have been implemented, for instance, source modeling or using near-field hydrophone measurements. We describe an alternative approach using a convolutional neural network for debubbling. The network is trained on real data containing a large range of source signatures to make the network robust and adaptive to signature variations. If the signature in the test data is equal to one of the signatures used in the training, the network performs well. In addition, if the signature changes in the middle of a sail line, the network can adapt to this change. Moreover, we investigate the network’s sensitivity to changing geology within a survey and on two different surveys on the Norwegian Continental Shelf (NCS). If the test data are from geology similar to the training data, the network performs better than if not. Even when applied to a different part of the NCS, the network is still able to remove most of the bubble noise.
- 22 September 2021
- Published by Society of Exploration Geophysicists in Geophysics
- Vol. 87 (1) , V1-V14
Debubbling seismic data using a generalized neural network
Estimating the far-field source signature has always been an important part of seismic processing. However, estimating the source signature from an air-gun array is difficult because of the complex interaction between the air bubble oscillations from each air gun, the state of the sea surface, variations in air pressure, the air guns’ geometry, etc. Removing the bubble noise is important because proper seismic imaging requires a zero-phased, spiky wavelet. Debubbling has conventionally been done by deconvolution using an (assumed) known source signature. Several methods to estimate the signature and debubble the data have been implemented, for instance, source modeling or using near-field hydrophone measurements. We describe an alternative approach using a convolutional neural network for debubbling. The network is trained on real data containing a large range of source signatures to make the network robust and adaptive to signature variations. If the signature in the test data is equal to one of the signatures used in the training, the network performs well. In addition, if the signature changes in the middle of a sail line, the network can adapt to this change. Moreover, we investigate the network’s sensitivity to changing geology within a survey and on two different surveys on the Norwegian Continental Shelf (NCS). If the test data are from geology similar to the training data, the network performs better than if not. Even when applied to a different part of the NCS, the network is still able to remove most of the bubble noise.
- 23 February 2021
- Published by Society of Exploration Geophysicists in Geophysics
- Vol. 86 (2) , W1-W19
Noise types and their attenuation in towed marine seismic: A tutorial
The presence of noise in towed marine seismic data is a long-standing problem. The various types of noise present in marine seismic records are never truly random. Instead, seismic noise is more complex and often challenging to attenuate in seismic data processing. Therefore, we have examined a wide range of real data examples contaminated by different types of noise including swell noise, seismic interference noise, strumming noise, passing vessel noise, vertical particle velocity noise, streamer hit and fishing gear noise, snapping shrimp noise, spike-like noise, cross-feed noise, and streamer-mounted device noise. The noise examples investigated focus only on data acquired with analog group forming. Each noise type is classified based on its origin, coherency, and frequency content. We then determine how the noise component can be effectively attenuated through industry-standard seismic processing techniques. In this tutorial, we avoid presenting the finest details of either the physics of the different types of noise themselves or the noise attenuation algorithms applied. Rather, we focus on presenting the noise problems themselves and find out how well the community is able to address such noise. Our aim is that, based on the provided insights, the geophysical community will be able to gain an appreciation of some of the most common types of noise encountered in marine towed seismic, in the hope to inspire more researchers to focus their attention on noise problems with greater potential industry impact.
- 23 February 2021
- Published by Society of Exploration Geophysicists in Geophysics
- Vol. 86 (2) , W1-W19
Noise types and their attenuation in towed marine seismic: A tutorial
The presence of noise in towed marine seismic data is a long-standing problem. The various types of noise present in marine seismic records are never truly random. Instead, seismic noise is more complex and often challenging to attenuate in seismic data processing. Therefore, we have examined a wide range of real data examples contaminated by different types of noise including swell noise, seismic interference noise, strumming noise, passing vessel noise, vertical particle velocity noise, streamer hit and fishing gear noise, snapping shrimp noise, spike-like noise, cross-feed noise, and streamer-mounted device noise. The noise examples investigated focus only on data acquired with analog group forming. Each noise type is classified based on its origin, coherency, and frequency content. We then determine how the noise component can be effectively attenuated through industry-standard seismic processing techniques. In this tutorial, we avoid presenting the finest details of either the physics of the different types of noise themselves or the noise attenuation algorithms applied. Rather, we focus on presenting the noise problems themselves and find out how well the community is able to address such noise. Our aim is that, based on the provided insights, the geophysical community will be able to gain an appreciation of some of the most common types of noise encountered in marine towed seismic, in the hope to inspire more researchers to focus their attention on noise problems with greater potential industry impact.
- Open Access
- 1 November 2020
- Published by Society of Exploration Geophysicists in Geophysics
- Vol. 85 (6) , V457-V471
Cross-streamer wavefield reconstruction through wavelet domain learning
Seismic exploration in complex geologic settings and shallow geologic targets has led to a demand for higher spatial and temporal resolution in the final migrated image. Conventional marine seismic and wide-azimuth data acquisition lack near-offset coverage, which limits imaging in these settings. A new marine source-over-cable survey, with split-spread configuration, known as TopSeis, was introduced in 2017 to address the shallow-target problem. However, wavefield reconstruction in the near offsets is challenging in the shallow part of the seismic record due to the high temporal frequencies and coarse sampling that leads to severe spatial aliasing. We have investigated deep learning as a tool for the reconstruction problem, beyond spatial aliasing. Our method is based on a convolutional neural network (CNN) approach trained in the wavelet domain that is used to reconstruct the wavefield across the streamers. We determine the performance of the proposed method on broadband synthetic data and TopSeis field data from the Barents Sea. From our synthetic example, we find that the CNN can be learned in the inline direction and applied in the crossline direction, and that the approach preserves the characteristics of the geologic model in the migrated section. In addition, we compare our method to an industry-standard Fourier-based interpolation method, in which the CNN approach shows an improvement in the root-mean-square (rms) error close to a factor of two. In our field data example, we find that the approach reconstructs the wavefield across the streamers in the shot domain, and it displays promising characteristics of a reconstructed 3D wavefield.
- 1 November 2020
- Published by Society of Exploration Geophysicists in Geophysics
- Vol. 85 (6) , V457-V471
Open AccessCross-streamer wavefield reconstruction through wavelet domain learning
Seismic exploration in complex geologic settings and shallow geologic targets has led to a demand for higher spatial and temporal resolution in the final migrated image. Conventional marine seismic and wide-azimuth data acquisition lack near-offset coverage, which limits imaging in these settings. A new marine source-over-cable survey, with split-spread configuration, known as TopSeis, was introduced in 2017 to address the shallow-target problem. However, wavefield reconstruction in the near offsets is challenging in the shallow part of the seismic record due to the high temporal frequencies and coarse sampling that leads to severe spatial aliasing. We have investigated deep learning as a tool for the reconstruction problem, beyond spatial aliasing. Our method is based on a convolutional neural network (CNN) approach trained in the wavelet domain that is used to reconstruct the wavefield across the streamers. We determine the performance of the proposed method on broadband synthetic data and TopSeis field data from the Barents Sea. From our synthetic example, we find that the CNN can be learned in the inline direction and applied in the crossline direction, and that the approach preserves the characteristics of the geologic model in the migrated section. In addition, we compare our method to an industry-standard Fourier-based interpolation method, in which the CNN approach shows an improvement in the root-mean-square (rms) error close to a factor of two. In our field data example, we find that the approach reconstructs the wavefield across the streamers in the shot domain, and it displays promising characteristics of a reconstructed 3D wavefield.
- 1 November 2019
- Published by EAGE Publications bv in First Break
- Vol. 37 (11) , 73-79
Advanced imaging solutions for tailored multi-source and multi-vessel surveys
- 1 November 2019
- Published by EAGE Publications bv in First Break
- Vol. 37 (11) , 73-79
Advanced imaging solutions for tailored multi-source and multi-vessel surveys
- 6 June 2016
- Published by Society of Exploration Geophysicists in Geophysics
- Vol. 81 (4) , U25-U38
A new parameter set for anisotropic multiparameter full-waveform inversion and application to a North Sea data set
Parameterization lies at the center of anisotropic full-waveform inversion (FWI) with multiparameter updates. This is because FWI aims to update the long and short wavelengths of the perturbations. Thus, it is important that the parameterization accommodates this. Recently, there has been an intensive effort to determine the optimal parameterization, centering the fundamental discussion mainly on the analysis of radiation patterns for each one of these parameterizations, and aiming to determine which is best suited for multiparameter inversion. We have developed a new parameterization in the scope of FWI, based on the concept of kinematically equivalent media, as originally proposed in other areas of seismic data analysis. Our analysis is also based on radiation patterns, as well as the relation between the perturbation of this set of parameters and perturbation in traveltime. The radiation pattern reveals that this parameterization combines some of the characteristics of parameterizations with one velocity and two Thomsen’s parameters and parameterizations using two velocities and one Thomsen’s parameter. The study of perturbation of traveltime with perturbation of model parameters shows that the new parameterization is less ambiguous when relating these quantities in comparison with other more commonly used parameterizations. We have concluded that our new parameterization is well-suited for inverting diving waves, which are of paramount importance to carry out practical FWI successfully. We have demonstrated that the new parameterization produces good inversion results with synthetic and real data examples. In the latter case of the real data example from the Central North Sea, the inverted models show good agreement with the geologic structures, leading to an improvement of the seismic image and flatness of the common image gathers.
- 6 June 2016
- Published by Society of Exploration Geophysicists in Geophysics
- Vol. 81 (4) , U25-U38
A new parameter set for anisotropic multiparameter full-waveform inversion and application to a North Sea data set
Parameterization lies at the center of anisotropic full-waveform inversion (FWI) with multiparameter updates. This is because FWI aims to update the long and short wavelengths of the perturbations. Thus, it is important that the parameterization accommodates this. Recently, there has been an intensive effort to determine the optimal parameterization, centering the fundamental discussion mainly on the analysis of radiation patterns for each one of these parameterizations, and aiming to determine which is best suited for multiparameter inversion. We have developed a new parameterization in the scope of FWI, based on the concept of kinematically equivalent media, as originally proposed in other areas of seismic data analysis. Our analysis is also based on radiation patterns, as well as the relation between the perturbation of this set of parameters and perturbation in traveltime. The radiation pattern reveals that this parameterization combines some of the characteristics of parameterizations with one velocity and two Thomsen’s parameters and parameterizations using two velocities and one Thomsen’s parameter. The study of perturbation of traveltime with perturbation of model parameters shows that the new parameterization is less ambiguous when relating these quantities in comparison with other more commonly used parameterizations. We have concluded that our new parameterization is well-suited for inverting diving waves, which are of paramount importance to carry out practical FWI successfully. We have demonstrated that the new parameterization produces good inversion results with synthetic and real data examples. In the latter case of the real data example from the Central North Sea, the inverted models show good agreement with the geologic structures, leading to an improvement of the seismic image and flatness of the common image gathers.