Karthick Babu Sai Sankar Gupta
Research Subjects
Karthick Babu Sai Sankar Gupta has a total of 70 co-authors. Here are the top co-authors by number of shared publications:
- Huub J. M. de Groot
Leiden Institute of Chemistry, Leiden University, Einsteinweg 55, 2301 RA Leiden, The Netherlands
3 shared publications - Alfred R. Holzwarth
Max Planck Institute for Chemical Energy Conversion, Stiftstrasse 34-36, 45470 Mülheim an der Ruhr, Germany
2 shared publications - Francesco Buda
Leiden Institute of Chemistry, Leiden University, Einsteinweg 55, P.O. Box 9502, 2333CC Leiden, The Netherlands
2 shared publications - Geert Jan Agur Sevink
Leiden University
2 shared publications - Gregory F. Schneider
Leiden Institute of Chemistry, Leiden University, Leiden, The Netherlands
2 shared publications - Marcellus Ubbink
Leiden Institute of Chemistry Leiden University Leiden The Netherlands
2 shared publications
Latest Publications
- Open Access
- 5 January 2026
- Published by American Chemical Society (ACS) in Langmuir
- Vol. 42 (2) , 2314-2327
Computational Modeling and Self-Assembly Synthesis of Borazine-Based Free-Standing Molecular-Thin Films
Boron-nitride-rich organic thin materials based on borazines have gained significant attention for their potential in nano(opto)electronic and energy storage devices. We address synthetic challenges in producing effective borazine-based thin films by proposing a dual theoretical and experimental protocol. This combines a multiscale computational approach, using density functional theory and classical molecular dynamics, with synthesis and thin-film formation via the Langmuir-Blodgett technique. The computational modeling focuses on three key properties: π-π stacking interactions, molecular steric hindrance, and dynamic self-assembly orientation. This modeling guided the selection of a borazine molecular building block and enabled the successful experimental formation of a free-standing molecular-thin borazine-based film. Solely π-π stacking interactions were found to drive the formation of a bilayer film with a molecular thickness of 2.1 nm, capable of spanning 0.6 μm diameter holes as a free-standing film. The agreement between theory and experiment confirms that the film retains essential features of the borazine molecular crystal, particularly intermolecular offset face-to-face π-π stacking and hexagonal-based pattern orientations. We thus establish a robust and transferable approach for modeling and synthesizing borazine-based thin materials, deepen the understanding of molecular interactions in borazine self-assembly, and demonstrate the suitability of the Langmuir-Blodgett technique for fabricating borazine-based 2D materials.
- 5 January 2026
- Published by American Chemical Society (ACS) in Langmuir
- Vol. 42 (2) , 2314-2327
Open AccessComputational Modeling and Self-Assembly Synthesis of Borazine-Based Free-Standing Molecular-Thin Films
Boron-nitride-rich organic thin materials based on borazines have gained significant attention for their potential in nano(opto)electronic and energy storage devices. We address synthetic challenges in producing effective borazine-based thin films by proposing a dual theoretical and experimental protocol. This combines a multiscale computational approach, using density functional theory and classical molecular dynamics, with synthesis and thin-film formation via the Langmuir-Blodgett technique. The computational modeling focuses on three key properties: π-π stacking interactions, molecular steric hindrance, and dynamic self-assembly orientation. This modeling guided the selection of a borazine molecular building block and enabled the successful experimental formation of a free-standing molecular-thin borazine-based film. Solely π-π stacking interactions were found to drive the formation of a bilayer film with a molecular thickness of 2.1 nm, capable of spanning 0.6 μm diameter holes as a free-standing film. The agreement between theory and experiment confirms that the film retains essential features of the borazine molecular crystal, particularly intermolecular offset face-to-face π-π stacking and hexagonal-based pattern orientations. We thus establish a robust and transferable approach for modeling and synthesizing borazine-based thin materials, deepen the understanding of molecular interactions in borazine self-assembly, and demonstrate the suitability of the Langmuir-Blodgett technique for fabricating borazine-based 2D materials.
- Open Access
- 17 February 2025
- Published by American Chemical Society (ACS) in The Journal of Physical Chemistry B
- Vol. 129 (8) , 2129-2137
Conformational Dynamics of Bacteriochlorophyll c in Chlorosomes from the bchQ Mutant of Chlorobaculum tepidum
In contrast to the common viewpoint that bacteriochlorophyll (BChl) motion is largely absent within the chlorosome assembly, physics-based modeling points to a crucial role of the nanoscale librational motion of the macrocycle for the transfer of excitons. To elucidate this motion experimentally, compositional uniformity and high sensitivity are required. We focused on uniformly 13C labeled chlorosome preparations from the bchQ mutant Chlorobaculum tepidum with significantly enhanced structural homogeneity. The librational motion is characterized using Rotational Echo DOuble Resonance (REDOR), and in addition, the impact of temperature on specific functionalities within BChl molecules is studied with 1-dimensional and 2-dimensional dipolar and scalar-based MAS NMR measurements. Results show the gradual freezing of the tails and side chains of the BChls with decreasing temperature. However, the librational motion analyzed by measuring the 5C-H dipolar coupling strength obtained from REDOR data sets persists at different temperatures. REDOR simulations show a close match to the experimental dephasing frequency of oscillation for a dipolar coupling strength of 17.5 ± 0.5 kHz which is considerably less than the dipolar coupling strength of 22.7 kHz in the rigid limit. Following a two-site jump model, we arrive at an estimate for BChl libration sampling at an angle of θ = 48 ± 4°, corroborating that the macrocycle indeed experiences significant librational motion on a time scale that is short compared to the NMR measurement time. This finding is in full quantitative support of the dominant rotational motion exhibited by the BChl macrocycle estimated from early MD simulations.
- 17 February 2025
- Published by American Chemical Society (ACS) in The Journal of Physical Chemistry B
- Vol. 129 (8) , 2129-2137
Open AccessConformational Dynamics of Bacteriochlorophyll c in Chlorosomes from the bchQ Mutant of Chlorobaculum tepidum
In contrast to the common viewpoint that bacteriochlorophyll (BChl) motion is largely absent within the chlorosome assembly, physics-based modeling points to a crucial role of the nanoscale librational motion of the macrocycle for the transfer of excitons. To elucidate this motion experimentally, compositional uniformity and high sensitivity are required. We focused on uniformly 13C labeled chlorosome preparations from the bchQ mutant Chlorobaculum tepidum with significantly enhanced structural homogeneity. The librational motion is characterized using Rotational Echo DOuble Resonance (REDOR), and in addition, the impact of temperature on specific functionalities within BChl molecules is studied with 1-dimensional and 2-dimensional dipolar and scalar-based MAS NMR measurements. Results show the gradual freezing of the tails and side chains of the BChls with decreasing temperature. However, the librational motion analyzed by measuring the 5C-H dipolar coupling strength obtained from REDOR data sets persists at different temperatures. REDOR simulations show a close match to the experimental dephasing frequency of oscillation for a dipolar coupling strength of 17.5 ± 0.5 kHz which is considerably less than the dipolar coupling strength of 22.7 kHz in the rigid limit. Following a two-site jump model, we arrive at an estimate for BChl libration sampling at an angle of θ = 48 ± 4°, corroborating that the macrocycle indeed experiences significant librational motion on a time scale that is short compared to the NMR measurement time. This finding is in full quantitative support of the dominant rotational motion exhibited by the BChl macrocycle estimated from early MD simulations.
- Open Access
- 28 March 2024
- Published by Royal Society of Chemistry (RSC) in Physical Chemistry Chemical Physics
- Vol. 26 (22) , 15856-15867
An integrated approach towards extracting structural characteristics of chlorosomes from a bchQ mutant of Chlorobaculum tepidum
The structure of the bchQ mutant of Cba. tepidum, with predominantly [8-Et, 12-Et]BChl c, is resolved using solid-state NMR, cryo-EM, and optical spectroscopy. Syn–anti parallel stacks run vertically with a subunit axial displacement of 1.49 nm.
- 28 March 2024
- Published by Royal Society of Chemistry (RSC) in Physical Chemistry Chemical Physics
- Vol. 26 (22) , 15856-15867
Open AccessAn integrated approach towards extracting structural characteristics of chlorosomes from a bchQ mutant of Chlorobaculum tepidum
The structure of the bchQ mutant of Cba. tepidum, with predominantly [8-Et, 12-Et]BChl c, is resolved using solid-state NMR, cryo-EM, and optical spectroscopy. Syn–anti parallel stacks run vertically with a subunit axial displacement of 1.49 nm.
- Open Access
- 17 February 2023
- Published by American Chemical Society (ACS) in Inorganic Chemistry
- Vol. 62 (9) , 3776-3787
Rigidified and Hydrophilic DOTA-like Lanthanoid Ligands: Design, Synthesis, and Dynamic Properties
Limiting the dynamics of paramagnetic tags is crucial for the accuracy of the structural information derived from paramagnetic nuclear magnetic resonance (NMR) experiments. A hydrophilic rigid 2,2 ',2 '', 2"'-( 1, 4,7, 10-tetraaz acyclo do de cane-1,4,7,10-tetrayl)tetraacetic acid (DOTA)-like lanthanoid complex was designed and synthesized following a strategy that allows the incorporation of two sets of two adjacent substituents. This resulted in a C2 symmetric hydrophilic and rigid macrocyclic ring, featuring four chiral hydroxyl-methylene substituents. NMR spectroscopy was used to investigate the conformational dynamics of the novel macrocycle upon complexation with europium and compared to DOTA and its derivatives. The twisted square antiprismatic and square antiprismatic conformers coexist, but the former is favored, which is different from DOTA. Two-dimensional 1H exchange spectroscopy shows that ring flipping of the cyclen-ring is suppressed due to the presence of the four chiral equatorial hydroxyl-methylene substituents at proximate positions. The reorientation of the pendant arms causes conformational exchange between two conformers. The reorientation of the coordination arms is slower when the ring flipping is suppressed. This indicates that these complexes are suitable scaffolds to develop rigid probes for paramagnetic NMR of proteins. Due to their hydrophilic nature, it is anticipated that they are less likely to cause protein precipitation than their more hydrophobic counterparts.
- 17 February 2023
- Published by American Chemical Society (ACS) in Inorganic Chemistry
- Vol. 62 (9) , 3776-3787
Open AccessRigidified and Hydrophilic DOTA-like Lanthanoid Ligands: Design, Synthesis, and Dynamic Properties
Limiting the dynamics of paramagnetic tags is crucial for the accuracy of the structural information derived from paramagnetic nuclear magnetic resonance (NMR) experiments. A hydrophilic rigid 2,2 ',2 '', 2"'-( 1, 4,7, 10-tetraaz acyclo do de cane-1,4,7,10-tetrayl)tetraacetic acid (DOTA)-like lanthanoid complex was designed and synthesized following a strategy that allows the incorporation of two sets of two adjacent substituents. This resulted in a C2 symmetric hydrophilic and rigid macrocyclic ring, featuring four chiral hydroxyl-methylene substituents. NMR spectroscopy was used to investigate the conformational dynamics of the novel macrocycle upon complexation with europium and compared to DOTA and its derivatives. The twisted square antiprismatic and square antiprismatic conformers coexist, but the former is favored, which is different from DOTA. Two-dimensional 1H exchange spectroscopy shows that ring flipping of the cyclen-ring is suppressed due to the presence of the four chiral equatorial hydroxyl-methylene substituents at proximate positions. The reorientation of the pendant arms causes conformational exchange between two conformers. The reorientation of the coordination arms is slower when the ring flipping is suppressed. This indicates that these complexes are suitable scaffolds to develop rigid probes for paramagnetic NMR of proteins. Due to their hydrophilic nature, it is anticipated that they are less likely to cause protein precipitation than their more hydrophobic counterparts.
- Open Access
- 27 October 2022
- Published by American Chemical Society (ACS) in Analytical Chemistry
- Vol. 94 (44) , 15350-15358
Automated Segmented-Flow Analysis – NMR with a Novel Fluoropolymer Flow Cell for High-Throughput Screening
High-throughput analysis in fields such as industrial biotechnology, combinatorial chemistry, and life sciences is becoming increasingly important. Nuclear magnetic resonance (NMR) spectroscopy is a powerful technique providing exhaustive molecular information on complex samples. Flow NMR in particular is a cost- and time-efficient method for large screenings. In this study, we have developed a novel 3.0 mm inner diameter polychlorotrifluoroethylene (PCTFE) flow cell for a segmented-flow analysis (SFA) - NMR automated platform. The platform uses FC-72 fluorinated oil and fluoropolymer components to achieve a fully fluorinated flow path. Samples were repeatably transferred from 96-deepwell plates to the flow cell by displacing a fixed volume of oil, with a transfer time of 42 s. 1H spectra were acquired fully automated with 500 and 600 MHz NMR spectrometers. The spectral performance of the novel PCTFE cell was equal to that of commercial glass cells. Peak area repeatability was excellent with a relative standard deviation of 0.1-0.5% for standard samples, and carryover was below 0.2% without intermediate washing. The sample temperature was conditioned by using a thermostated transfer line in order to reduce the equilibration time in the probe and increase the throughput. Finally, analysis of urine samples demonstrated the applicability of this platform for screening complex matrices.
- 27 October 2022
- Published by American Chemical Society (ACS) in Analytical Chemistry
- Vol. 94 (44) , 15350-15358
Open AccessAutomated Segmented-Flow Analysis – NMR with a Novel Fluoropolymer Flow Cell for High-Throughput Screening
High-throughput analysis in fields such as industrial biotechnology, combinatorial chemistry, and life sciences is becoming increasingly important. Nuclear magnetic resonance (NMR) spectroscopy is a powerful technique providing exhaustive molecular information on complex samples. Flow NMR in particular is a cost- and time-efficient method for large screenings. In this study, we have developed a novel 3.0 mm inner diameter polychlorotrifluoroethylene (PCTFE) flow cell for a segmented-flow analysis (SFA) - NMR automated platform. The platform uses FC-72 fluorinated oil and fluoropolymer components to achieve a fully fluorinated flow path. Samples were repeatably transferred from 96-deepwell plates to the flow cell by displacing a fixed volume of oil, with a transfer time of 42 s. 1H spectra were acquired fully automated with 500 and 600 MHz NMR spectrometers. The spectral performance of the novel PCTFE cell was equal to that of commercial glass cells. Peak area repeatability was excellent with a relative standard deviation of 0.1-0.5% for standard samples, and carryover was below 0.2% without intermediate washing. The sample temperature was conditioned by using a thermostated transfer line in order to reduce the equilibration time in the probe and increase the throughput. Finally, analysis of urine samples demonstrated the applicability of this platform for screening complex matrices.
- Open Access
- 8 March 2021
- Published by Wiley in Chemphyschem
- Vol. 22 (8) , 733-740
The Resting Oxidized State of Small Laccase Analyzed with Paramagnetic NMR Spectroscopy
The enzyme laccase catalyzes the reduction of dioxygen to water at the trinuclear copper center (TNC). The TNC comprises a type‐3 (T3) and a type‐2 (T2) copper site. The paramagnetic NMR spectrum of the small laccase from Streptomyces coelicolor (SLAC) without the substrate shows a mixture of two catalytic states, the resting oxidized (RO) state and the native intermediate (NI) state. An analysis of the resonances of the RO state is reported. In this state, hydrogen resonances only of the T3 copper ligands can be found, in the region of 12–22 ppm. Signals from all six histidine ligands are found and can be attributed to Hδ1, Hβ or backbone amide HN nuclei. Two sequence‐specific assignments are proposed on the basis of a second‐coordination shell variant that also lacks the copper ion at the T1 site, SLAC−T1D/Q291E. This double mutant is found to be exclusively in the RO state, revealing a subtle balance between the RO and the NI states.
- 8 March 2021
- Published by Wiley in Chemphyschem
- Vol. 22 (8) , 733-740
Open AccessThe Resting Oxidized State of Small Laccase Analyzed with Paramagnetic NMR Spectroscopy
The enzyme laccase catalyzes the reduction of dioxygen to water at the trinuclear copper center (TNC). The TNC comprises a type‐3 (T3) and a type‐2 (T2) copper site. The paramagnetic NMR spectrum of the small laccase from Streptomyces coelicolor (SLAC) without the substrate shows a mixture of two catalytic states, the resting oxidized (RO) state and the native intermediate (NI) state. An analysis of the resonances of the RO state is reported. In this state, hydrogen resonances only of the T3 copper ligands can be found, in the region of 12–22 ppm. Signals from all six histidine ligands are found and can be attributed to Hδ1, Hβ or backbone amide HN nuclei. Two sequence‐specific assignments are proposed on the basis of a second‐coordination shell variant that also lacks the copper ion at the T1 site, SLAC−T1D/Q291E. This double mutant is found to be exclusively in the RO state, revealing a subtle balance between the RO and the NI states.
- Open Access
- 7 February 2021
- Published by MDPI AG in Pharmaceutics
- Vol. 13 (2) , 235
Novel Fluorinated Poly (Lactic-Co-Glycolic acid) (PLGA) and Polyethylene Glycol (PEG) Nanoparticles for Monitoring and Imaging in Osteoarthritis
Polymeric nanoparticles (NPs) find many uses in nanomedicine, from drug delivery to imaging. In this regard, poly (lactic-co-glycolic acid) (PLGA) and polyethylene glycol (PEG) particles are the most widely applied types of nano-systems due to their biocompatibility and biodegradability. Here we developed novel fluorinated polymeric NPs as vectors for multi-modal nanoprobes. This approach involved modifying polymeric NPs with trifluoroacetamide (TFA) and loading them with a near-infrared (NIR) dye for different imaging modalities, such as magnetic resonance imaging (MRI) and optical imaging. The PLGA-PEG-TFA NPs generated were characterized in vitro using the C28/I2 human chondrocyte cell line and in vivo in a mouse model of osteoarthritis (OA). The NPs were well absorbed, as confirmed by confocal microscopy, and were non-toxic to cells. To test the NPs as a drug delivery system for contrast agents of OA, the nanomaterial was administered via the intra-articular (IA) administration method. The dye-loaded NPs were injected in the knee joint and then visualized and tracked in vivo by fluorine-19 nuclear magnetic resonance and fluorescence imaging. Here, we describe the development of novel intrinsically fluorinated polymeric NPs modality that can be used in various molecular imaging techniques to visualize and track OA treatments and their potential use in clinical trials.
- 7 February 2021
- Published by MDPI AG in Pharmaceutics
- Vol. 13 (2) , 235
Open AccessNovel Fluorinated Poly (Lactic-Co-Glycolic acid) (PLGA) and Polyethylene Glycol (PEG) Nanoparticles for Monitoring and Imaging in Osteoarthritis
Polymeric nanoparticles (NPs) find many uses in nanomedicine, from drug delivery to imaging. In this regard, poly (lactic-co-glycolic acid) (PLGA) and polyethylene glycol (PEG) particles are the most widely applied types of nano-systems due to their biocompatibility and biodegradability. Here we developed novel fluorinated polymeric NPs as vectors for multi-modal nanoprobes. This approach involved modifying polymeric NPs with trifluoroacetamide (TFA) and loading them with a near-infrared (NIR) dye for different imaging modalities, such as magnetic resonance imaging (MRI) and optical imaging. The PLGA-PEG-TFA NPs generated were characterized in vitro using the C28/I2 human chondrocyte cell line and in vivo in a mouse model of osteoarthritis (OA). The NPs were well absorbed, as confirmed by confocal microscopy, and were non-toxic to cells. To test the NPs as a drug delivery system for contrast agents of OA, the nanomaterial was administered via the intra-articular (IA) administration method. The dye-loaded NPs were injected in the knee joint and then visualized and tracked in vivo by fluorine-19 nuclear magnetic resonance and fluorescence imaging. Here, we describe the development of novel intrinsically fluorinated polymeric NPs modality that can be used in various molecular imaging techniques to visualize and track OA treatments and their potential use in clinical trials.
- Open Access
- 16 November 2020
- Published by American Chemical Society (ACS) in Journal of the American Chemical Society
- Vol. 142 (47) , 19907-19916
Thiosquaramide-Based Supramolecular Polymers: Aromaticity Gain in a Switched Mode of Self-Assembly
Despite a growing understanding of factors that drive monomer self-assembly to form supramolecular polymers, the effects of aromaticity gain have been largely ignored. Herein, we document the aromaticity gain in two different self-assembly modes of squaramide-based bolaamphiphiles. Importantly, O → S substitution in squaramide synthons resulted in supramolecular polymers with increased fiber flexibility and lower degrees of polymerization. Computations and spectroscopic experiments suggest that the oxo- and thiosquaramide bolaamphiphiles self-assemble into “head-to-tail” versus “stacked” arrangements, respectively. Computed energetic and magnetic criteria of aromaticity reveal that both modes of self-assembly increase the aromatic character of the squaramide synthons, giving rise to stronger intermolecular interactions in the resultant supramolecular polymer structures. These examples suggest that both hydrogen-bonding and stacking interactions can result in increased aromaticity upon self-assembly, highlighting its relevance in monomer design.
- 16 November 2020
- Published by American Chemical Society (ACS) in Journal of the American Chemical Society
- Vol. 142 (47) , 19907-19916
Open AccessThiosquaramide-Based Supramolecular Polymers: Aromaticity Gain in a Switched Mode of Self-Assembly
Despite a growing understanding of factors that drive monomer self-assembly to form supramolecular polymers, the effects of aromaticity gain have been largely ignored. Herein, we document the aromaticity gain in two different self-assembly modes of squaramide-based bolaamphiphiles. Importantly, O → S substitution in squaramide synthons resulted in supramolecular polymers with increased fiber flexibility and lower degrees of polymerization. Computations and spectroscopic experiments suggest that the oxo- and thiosquaramide bolaamphiphiles self-assemble into “head-to-tail” versus “stacked” arrangements, respectively. Computed energetic and magnetic criteria of aromaticity reveal that both modes of self-assembly increase the aromatic character of the squaramide synthons, giving rise to stronger intermolecular interactions in the resultant supramolecular polymer structures. These examples suggest that both hydrogen-bonding and stacking interactions can result in increased aromaticity upon self-assembly, highlighting its relevance in monomer design.
- Open Access
- 3 September 2020
- Published by American Chemical Society (ACS) in ACS Applied Nano Materials
- Vol. 3 (11) , 10586-10590
Supramolecular Multilayered Templates for Fabricating Nanometer-Precise Spacings: Implications for the Next-Generation of Devices Integrating Nanogap/Nanochannel Components
Molecular transistors, electromagnetic waveguides, plasmonic devices and novel generations of nanofluidic channels comprise precisely separated gaps of nanometric and subnanometric spacing. Nonetheless, fabricating a nanogap/nanochannel is a technological challenge, currently tackled by several approaches such as breakdown electromigration and lithography. The aforementioned techniques, though, are limited respectively in terms of gap stability and ultimate resolution. Hereby, nanogaps/nanochannels are templated via microtomy of metallic thin films embedded in a polymer matrix and precisely separated by a nanometric, sacrificial layer of polyelectrolytes grown via the Layer-by-Layer (LbL) approach. The versatility of the LbL technique, both in terms of number of layers and composition of polyelectrolytes, allows to finely tune the spacing across the gap; the LbL template can further be removed by plasma etching. Our findings pave the path towards molecularly defined spacings of nanometer-scale precision and outstanding stability, modular into complex architectures for the next generation of devices integrating nanogap/nanochannel components.
- 3 September 2020
- Published by American Chemical Society (ACS) in ACS Applied Nano Materials
- Vol. 3 (11) , 10586-10590
Open AccessSupramolecular Multilayered Templates for Fabricating Nanometer-Precise Spacings: Implications for the Next-Generation of Devices Integrating Nanogap/Nanochannel Components
Molecular transistors, electromagnetic waveguides, plasmonic devices and novel generations of nanofluidic channels comprise precisely separated gaps of nanometric and subnanometric spacing. Nonetheless, fabricating a nanogap/nanochannel is a technological challenge, currently tackled by several approaches such as breakdown electromigration and lithography. The aforementioned techniques, though, are limited respectively in terms of gap stability and ultimate resolution. Hereby, nanogaps/nanochannels are templated via microtomy of metallic thin films embedded in a polymer matrix and precisely separated by a nanometric, sacrificial layer of polyelectrolytes grown via the Layer-by-Layer (LbL) approach. The versatility of the LbL technique, both in terms of number of layers and composition of polyelectrolytes, allows to finely tune the spacing across the gap; the LbL template can further be removed by plasma etching. Our findings pave the path towards molecularly defined spacings of nanometer-scale precision and outstanding stability, modular into complex architectures for the next generation of devices integrating nanogap/nanochannel components.