ZZZhen Zhong

Zhen Zhong

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Zhen Zhong has a total of 15 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • SAGE: S tealthy A ttack Ge neration in cyber-physical systems

    by Michael Biehler, Zhen Zhong, Jianjun Shi

    Cyber-physical systems (CPS) have been increasingly attacked by hackers. CPS are especially vulnerable to attackers that have full knowledge of the system's configuration. Therefore, novel anomaly detection algorithms in the presence of a knowledgeable adversary need to be developed. However, this research is still in its infancy due to limited attack data availability and test beds. By proposing a holistic attack modeling framework, we aim to show the vulnerability of existing detection algorithms and provide a basis for novel sensor-based cyber-attack detection. Stealthy Attack GEneration (SAGE) for CPS serves as a tool for cyber-risk assessment of existing systems and detection algorithms for practitioners and researchers alike. Stealthy attacks are characterized by malicious injections into the CPS through input, output, or both, which produce bounded changes in the detection residue. By using the SAGE framework, we generate stealthy attacks to achieve three objectives: (i) Maximize damage, (ii) Avoid detection, and (iii) Minimize the attack cost. Additionally, an attacker needs to adhere to the physical principles in a CPS (objective iv). The goal of SAGE is to model worst-case attacks, where we assume limited information asymmetries between attackers and defenders (e.g., insider knowledge of the attacker). Those worst-case attacks are the hardest to detect, but common in practice and allow understanding of the maximum conceivable damage. We propose an efficient solution procedure for the novel SAGE optimization problem. The SAGE framework is illustrated in three case studies. Those case studies serve as modeling guidelines for the development of novel attack detection algorithms and comprehensive cyber-physical risk assessment of CPS. The results show that SAGE attacks can cause severe damage to a CPS, while only changing the input control signals minimally. This avoids detection and keeps the cost of an attack low. This highlights the need for more advanced detection algorithms and novel research in cyber-physical security.


  • Image-Based Feedback Control Using Tensor Analysis

    by Zhong Zhen, Kamran Paynabar, Jianjun (Jan) Shi

    In manufacturing systems, many quality measurements are in the form of images, including overlay measurements in the semiconductor manufacturing and dimensional deformation profiles of fuselages in an aircraft assembly process. To reduce the process variability and ensure on-target quality, process control strategies should be deployed, in which the high-dimensional image output is controlled by one or more input variables. To design an effective control strategy, the process model should be first estimated via relationship exploration between the image output and inputs, off-line. Next, the control law is formulated by minimizing the control objective function online. The main challenges of achieving such a control strategy include (i) the high dimensional output of a regression model, (ii) the integrated analysis of both the spatial structure of image outputs and the temporal structure of the image sequence, and (iii) non-i.i.d. noises. To address these challenges, we propose a novel tensor-based process control approach by incorporating the tensor time series and regression techniques. Based on the process model, we can then obtain the control law by minimizing a control objective function. Although our proposed approach is motivated by a 2D image case, it can be extended to higher-order tensors such as point clouds. Simulation and case studies show that our proposed method is more effective than benchmarks in terms of relative mean square error.


  • Convex relaxation for optimal fixture layout design

    by Zhen Zhong, Shancong Mou, Jeffrey H. Hunt, Jianjun Shi

    This article proposes a general fixture layout design framework that directly integrates the system equation with the convex relaxation method. Note that the optimal fixture design problem is a large-scale combinatorial optimization problem; we relax it to a convex Semi-Definite Programming (SDP) problem by adopting sparse learning and SDP relaxation techniques. It can be solved efficiently by existing convex optimization algorithms and thus generates a near-optimal fixture layout. A real case study in the half-to-half fuselage assembly process indicates the superiority of our proposed algorithm compared to the current industry practice and state-of-art methods.


  • Open Access

    Convex Relaxation for Optimal Fixture Layout Design

    by Zhen Zhong, Shancong Mou, Jeffrey H. Hunt, Jianjun Shi

    This paper proposes a general fixture layout design framework that directly integrates the system equation with the convex relaxation method. Note that the optimal fixture design problem is a large-scale combinatorial optimization problem, we relax it to a convex semidefinite programming (SDP) problem by adopting sparse learning and SDP relaxation techniques. It can be solved efficiently by existing convex optimization algorithms and thus generates a near-optimal fixture layout. A real case study in the half-to-half fuselage assembly process indicates the superiority of our proposed algorithm compared to the current industry practice and state-of-art methods.

  • Finite Element Analysis Model-Based Cautious Automatic Optimal Shape Control for Fuselage Assembly

    by Zhen Zhong, Shancong Mou, Jeffrey H. Hunt, Jianjun Shi

    In a half fuselage assembly process, shape control is vital for achieving ultra-high-precision assembly. To achieve better shape adjustment, we need to determine the optimal location and force of each actuator to push or pull a fuselage to compensate for its initial shape distortion. The current practice achieves this goal by solving a surrogate model-based optimization problem. However, there are two limitations of this surrogate model-based method: (1) low efficiency: collecting training data for surrogate modeling from many finite element analysis (FEA) replications is time-consuming; (2) non-optimality: The required number of FEA replications for building an accurate surrogate model will increase as the potential number of actuator locations increases. Therefore, the surrogate model can only be built on a limited number of prespecified potential actuator locations, which will lead to suboptimal control results. To address these issues, this paper proposes an FEA model-based automatic optimal shape control (AOSC) framework. This method directly loads the system equation from the FEA simulation platform to determine the optimal location and force of each actuator. Moreover, the proposed method further integrates the cautious control concept into the AOSC system to address model uncertainties in practice. The case study with industrial settings shows that the proposed Cautious AOSC method achieves higher control accuracy compared to the current industrial practice.


  • Open Access

    SAGE: Stealthy Attack GEneration for Cyber-Physical Systems

    by Michael Biehler, Zhen Zhong, Jianjun Shi

    Cyber-physical systems (CPS) have been increasingly attacked by hackers. Recent studies have shown that CPS are especially vulnerable to insider attacks, in which case the attacker has full knowledge of the systems configuration. To better prevent such types of attacks, we need to understand how insider attacks are generated. Typically, there are three critical aspects for a successful insider attack: (i) Maximize damage, (ii) Avoid detection and (iii) Minimize the attack cost. In this paper we propose a Stealthy Attack GEneration (SAGE) framework by formulizing a novel optimization problem considering these three objectives and the physical constraints of the CPS. By adding small worst-case perturbations to the system, the SAGE attack can generate significant damage, while remaining undetected by the systems monitoring algorithms. The proposed methodology is evaluated on several anomaly detection algorithms. The results show that SAGE attacks can cause severe damage while staying undetected and keeping the cost of an attack low. Our method can be accessed in the supplementary material of this paper to aid researcher and practitioners in the design and development of resilient CPS and detection algorithms.

  • Open Access

    An Augmented Regression Model for Tensors With Missing Values

    by Feng Wang, Mostafa Reisi Gahrooei, Zhen Zhong, Tao Tang, Jianjun Shi

    Heterogeneous but complementary sources of data provide an unprecedented opportunity for developing accurate statistical models of systems. Although the existing methods have shown promising results, they are mostly applicable to situations where the system output is measured in its complete form. In reality, however, it may not be feasible to obtain the complete output measurement of a system, which results in observations that contain missing values. This article introduces a general framework that integrates tensor regression with tensor completion and proposes an efficient optimization framework that alternates between two steps for parameter estimation. Through multiple simulations and a case study, we evaluate the performance of the proposed method. The results indicate the superiority of the proposed method in comparison to a benchmark.


  • Adaptive Cautious Regularized Run-to-Run Controller for Lithography Process

    by Zhen Zhong, Andi Wang, Hyunsik Kim, Kamran Paynabar, Jianjun Shi

    Photolithography is the bottleneck for quality improvement in semiconductor manufacturing processes. The decreasing critical dimensions of the semiconductor product require more effective run-to-run control technology. Currently, Exponential Weighted Moving Average (EWMA) control scheme is widely used in the overlay control of lithography processes. In this article, we address three shortcomings of the current EWMA run-to-run control scheme: (i) the weight parameter λ used in the EWMA control scheme is set as a fixed value instead of adjusted adaptively according to the process changes; (ii) the conventional EWMA control scheme fails to take the model and parameter uncertainties into consideration; and (iii) the adjustable range of the control variables is not considered in the conventional EWMA control scheme. To meet tighter overlay specifications, we propose a new adaptive run-to-run control scheme to address these three limitations. The effectiveness of the new controller is validated through simulation studies.


  • A Penalized Convolution Model for Oil Leakage Detection in Electrohydraulic Railway Point Systems

    by Feng Wang, Zhen Zhong, Guang Wang, Tao Tang

    The railway point is one of the most critical systems in railway, which enables trains to be guided from one track to another. Failures of railway point systems often lead to service delays and hazardous situations. With the ever-increasing railway operation, stable and safe operation of railway point systems becomes more and more important. The electro-hydraulic railway point system is widely adopted due to its high efficiency and long service life. However, its operation highly relies on a sufficient volume of oil, which usually leaks gradually due to many practical issues, e.g., the wear of joint rings, the aging and corrosion of oil pipes, etc. The gradual oil leakage often causes failures of electro-hydraulic railway point systems, so it is important to develop effective and reliable technologies for the early detection of slow oil leakage. To achieve this goal, the static oil level is used to construct the monitoring statistic since it is a direct indicator of the oil volume, and more suitable for railway point systems than the hydraulic pressure due to the discrete demand for operations and the short duration of every operation. However, it is very challenging to utilize the oil level directly for oil leakage detection due to the large variability caused by the environmental temperature. Therefore, in this paper, we propose a penalized convolution-based model to capture the relationship between the temperature and the oil level, whose parameters are estimated by using least squares with a smooth penalty. With the trained model, we obtain the residuals by removing the effect of temperature from the oil-level signal. Then, the CUSUM chart is employed to monitor the residual signal since it is sensitive to the small mean shift. Finally, the proposed method is evaluated through a case study by using in-situ data collected from a real point system in Changsha Railway Station.