Raul Zaharia
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Raul Zaharia has a total of 44 co-authors. Here are the top co-authors by number of shared publications:
- Ioan Both
Politehnica University of Timisoara
5 shared publications - Ana-Cristina Vasile
N.I.R.D. URBAN-INCERC, Timisoara Branch
3 shared publications - Aurelian Gruin
N.I.R.D. URBAN-INCERC
3 shared publications - Cornelia Baeră
Politehnica University of Timisoara
3 shared publications D Dubina
The ‘Politehnica’ University of Timisoara, Civil Engineering Faculty, CMMC Department, Timisoara 1900, Romania
2 shared publicationsD. Dubina
2 shared publications
Latest Publications
- Open Access
- 7 October 2026
- Published by Springer Nature
- p. 603-611
Advancing Circular Economy Practices through the Experimental Valorization of Spent Garnets (SG) for Sustainable Building Material Development
- 7 October 2026
- Published by Springer Nature
- p. 603-611
Open AccessAdvancing Circular Economy Practices through the Experimental Valorization of Spent Garnets (SG) for Sustainable Building Material Development
- Open Access
- 7 October 2026
- Published by Springer Nature
- p. 467-474
Opportunities for the Valorization of Steel Furnace Slags (SFS) Waste in Romania Within the Circular Economy Framework
- 7 October 2026
- Published by Springer Nature
- p. 467-474
Open AccessOpportunities for the Valorization of Steel Furnace Slags (SFS) Waste in Romania Within the Circular Economy Framework
- Open Access
- 1 September 2026
- Published by Emerald Publishing in Smart and Sustainable Built Environment
- p. 1-25
Measuring BIM readiness and digitalisation in building permitting: a KPI-based framework
Purpose: Digital building permitting (DBP) is increasingly promoted as a key instrument for improving efficiency, transparency and interoperability in public administration. Building Information Modelling (BIM) is cited as a central enabler of this transition. However, existing research offers limited support for systematically benchmarking BIM-based building permitting (BP) systems across different jurisdictions. This study addresses this gap by developing and empirically validating a multi-level Key Performance Indicator (KPI) framework to support comparative benchmarking of BIM-based BP processes. Design/methodology/approach: The study adopts a mixed-method research design. A structured literature review was combined with qualitative content analysis and thematic synthesis to develop an initial KPI framework spanning four subsystems. The framework was validated through seven semi-structured expert interviews with public authorities involved in municipalities across six countries. Expert feedback was analysed qualitatively, while scaled KPI responses were interpreted quantitatively to support cross-country comparison and benchmarking. Findings: The results reveal substantial variation in BP implementation across jurisdictions. While electronic submission is widely established, deeper BIM integration, interoperability and automated compliance checking remain limited. The benchmarking results suggest the presence of different implementation patterns rather than linear maturity paths, with observed differences being influenced more by factors such as legislative clarity, modelling standards and organisational capacity than by technological availability alone. Experts emphasised that procedural inefficiencies tend to originate from upstream regulatory and institutional constraints. Originality/value: The research responds to the growing need for evidence-based instruments and offers a validated, practice-oriented framework that supports systematic benchmarking of BIM-based BP systems and provides authorities and policymakers with a structured basis for identifying bottlenecks, comparing approaches and guiding evidence-based DBP.
- 1 September 2026
- Published by Emerald Publishing in Smart and Sustainable Built Environment
- p. 1-25
Open AccessMeasuring BIM readiness and digitalisation in building permitting: a KPI-based framework
Purpose: Digital building permitting (DBP) is increasingly promoted as a key instrument for improving efficiency, transparency and interoperability in public administration. Building Information Modelling (BIM) is cited as a central enabler of this transition. However, existing research offers limited support for systematically benchmarking BIM-based building permitting (BP) systems across different jurisdictions. This study addresses this gap by developing and empirically validating a multi-level Key Performance Indicator (KPI) framework to support comparative benchmarking of BIM-based BP processes. Design/methodology/approach: The study adopts a mixed-method research design. A structured literature review was combined with qualitative content analysis and thematic synthesis to develop an initial KPI framework spanning four subsystems. The framework was validated through seven semi-structured expert interviews with public authorities involved in municipalities across six countries. Expert feedback was analysed qualitatively, while scaled KPI responses were interpreted quantitatively to support cross-country comparison and benchmarking. Findings: The results reveal substantial variation in BP implementation across jurisdictions. While electronic submission is widely established, deeper BIM integration, interoperability and automated compliance checking remain limited. The benchmarking results suggest the presence of different implementation patterns rather than linear maturity paths, with observed differences being influenced more by factors such as legislative clarity, modelling standards and organisational capacity than by technological availability alone. Experts emphasised that procedural inefficiencies tend to originate from upstream regulatory and institutional constraints. Originality/value: The research responds to the growing need for evidence-based instruments and offers a validated, practice-oriented framework that supports systematic benchmarking of BIM-based BP systems and provides authorities and policymakers with a structured basis for identifying bottlenecks, comparing approaches and guiding evidence-based DBP.
- Open Access
- 19 January 2026
- Published by MDPI AG in Sustainability
- Vol. 18 (2) , 1000
Sustainable Valorization of Spent Garnet Wastes in Construction Eco-Materials: Validation Stage of Performance Assessment
Spent garnet (SG) wastes are generated in significant quantities by several industrial activities, including abrasive waterjet cutting (AWJ), abrasive blasting, and filtration and powdered media applications. These wastes represent a promising secondary raw material for the production of sustainable construction materials, particularly green mortars and concretes, through their partial replacement of natural sand in cementitious systems. Such applications are relevant to both hydraulically setting inorganic binders (cement-based materials) and alkali-activated cementitious materials (AACMs). The valorization of SG wastes offers multiple benefits, notably a dual environmental advantage: reducing the consumption of natural aggregates and diverting industrial waste from disposal by integrating it into a new life cycle as a value-added by-product. Additional potential advantages include reduced production costs and possible improvements in the overall performance of mortars and concretes. Despite these benefits, the use of SG as an aggregate replacement remains insufficiently explored, with existing studies providing only preliminary and fragmented evidence of its feasibility. This paper presents an overview of a comprehensive four-year research program investigating SG wastes derived from single-cycle AWJ processes and their incorporation into conventional mortars as partial fine aggregate replacement in cement-based construction composites. The validation stage of the performance assessment expands the range of SG sources by including new sampling from the original suppliers, enabling verification of the repeatability and reproducibility of earlier findings. A broad set of physical, mechanical, and durability properties—particularly resistance to freeze–thaw cycles—is evaluated to achieve a robust and comprehensive material characterization. These results are further correlated with chemical and microstructural analyses, providing critical insights to support the technological transfer of SG-based construction materials to industrial applications with reduced carbon footprint.
- 19 January 2026
- Published by MDPI AG in Sustainability
- Vol. 18 (2) , 1000
Open AccessSustainable Valorization of Spent Garnet Wastes in Construction Eco-Materials: Validation Stage of Performance Assessment
Spent garnet (SG) wastes are generated in significant quantities by several industrial activities, including abrasive waterjet cutting (AWJ), abrasive blasting, and filtration and powdered media applications. These wastes represent a promising secondary raw material for the production of sustainable construction materials, particularly green mortars and concretes, through their partial replacement of natural sand in cementitious systems. Such applications are relevant to both hydraulically setting inorganic binders (cement-based materials) and alkali-activated cementitious materials (AACMs). The valorization of SG wastes offers multiple benefits, notably a dual environmental advantage: reducing the consumption of natural aggregates and diverting industrial waste from disposal by integrating it into a new life cycle as a value-added by-product. Additional potential advantages include reduced production costs and possible improvements in the overall performance of mortars and concretes. Despite these benefits, the use of SG as an aggregate replacement remains insufficiently explored, with existing studies providing only preliminary and fragmented evidence of its feasibility. This paper presents an overview of a comprehensive four-year research program investigating SG wastes derived from single-cycle AWJ processes and their incorporation into conventional mortars as partial fine aggregate replacement in cement-based construction composites. The validation stage of the performance assessment expands the range of SG sources by including new sampling from the original suppliers, enabling verification of the repeatability and reproducibility of earlier findings. A broad set of physical, mechanical, and durability properties—particularly resistance to freeze–thaw cycles—is evaluated to achieve a robust and comprehensive material characterization. These results are further correlated with chemical and microstructural analyses, providing critical insights to support the technological transfer of SG-based construction materials to industrial applications with reduced carbon footprint.
- Open Access
- 10 May 2024
- Published by Springer Nature
- p. 135-143
Exploratory Research on the Thermal Properties of Wood in Real Fire Conditions
As construction material, wood represents a response to concerns over the environmental impact caused by steel and concrete. A good performance of timber structural members must be demonstrated in fire. To perform numerical simulations of timber structures under elevated temperatures, EN1995-1-2 provides effective thermal properties of wood for computing the temperature distribution. These properties have been determined considering the standard time-temperature curve. The aim of the exploratory research is to verify to what extent these properties may be considered also for natural fires, by adapting the real exposure conditions within the numerical simulations. In the tests performed at the University of Liège, timber samples were subjected on one side to heat fluxes of different intensities, including decreasing phases. Time-temperature curves inside the samples were recorded by thermo-couples inserted at different distances from the exposed side. Using SAFIR software, dedicated to the analysis of structures under elevated temperatures, the temperature distribution within the samples was calculated considering thermal properties provided by EN1995-1-2. The comparison with the experimental results emphasized that the correspondence is not satisfactory for all cases.
- 10 May 2024
- Published by Springer Nature
- p. 135-143
Open AccessExploratory Research on the Thermal Properties of Wood in Real Fire Conditions
As construction material, wood represents a response to concerns over the environmental impact caused by steel and concrete. A good performance of timber structural members must be demonstrated in fire. To perform numerical simulations of timber structures under elevated temperatures, EN1995-1-2 provides effective thermal properties of wood for computing the temperature distribution. These properties have been determined considering the standard time-temperature curve. The aim of the exploratory research is to verify to what extent these properties may be considered also for natural fires, by adapting the real exposure conditions within the numerical simulations. In the tests performed at the University of Liège, timber samples were subjected on one side to heat fluxes of different intensities, including decreasing phases. Time-temperature curves inside the samples were recorded by thermo-couples inserted at different distances from the exposed side. Using SAFIR software, dedicated to the analysis of structures under elevated temperatures, the temperature distribution within the samples was calculated considering thermal properties provided by EN1995-1-2. The comparison with the experimental results emphasized that the correspondence is not satisfactory for all cases.
- Open Access
- 7 January 2022
- Published by MDPI AG in Applied Sciences
- Vol. 12 (2) , 574
Analytical Method for the Bending Resistance of Slim Floor Beams with Asymmetric Double-T Steel Section under ISO Fire
The slim floor beams, characterized by the steel profile embedded in the concrete slab, may be found in different configurations, based on the shape of the steel profile cross-section, which can vary from a rectangular to double-T section. While the most common shape used nowadays is the double-T cross-section, the Eurocodes do not provide a simplified method for the fire resistance assessment. The literature offers a simplified method for computation of bending resistance under elevated temperature, based on existing research on thermal models, and was validated for a particular type of slim floor beams (SFB). The current study extends the scope of application of this method, for different types of slim floor beam, which include an asymmetric double-T steel cross-section. The objective was reached through a numerical procedure, by analyzing 162 configurations subjected to four different fire requirements (R30, R60, R90, R120), resulting in a total of 648 analyses, performed with a validated numerical model in SAFIR software. The results in terms of bending resistance showed that the simplified method represents a strong tool for the fire design of slim floor beams.
- 7 January 2022
- Published by MDPI AG in Applied Sciences
- Vol. 12 (2) , 574
Open AccessAnalytical Method for the Bending Resistance of Slim Floor Beams with Asymmetric Double-T Steel Section under ISO Fire
The slim floor beams, characterized by the steel profile embedded in the concrete slab, may be found in different configurations, based on the shape of the steel profile cross-section, which can vary from a rectangular to double-T section. While the most common shape used nowadays is the double-T cross-section, the Eurocodes do not provide a simplified method for the fire resistance assessment. The literature offers a simplified method for computation of bending resistance under elevated temperature, based on existing research on thermal models, and was validated for a particular type of slim floor beams (SFB). The current study extends the scope of application of this method, for different types of slim floor beam, which include an asymmetric double-T steel cross-section. The objective was reached through a numerical procedure, by analyzing 162 configurations subjected to four different fire requirements (R30, R60, R90, R120), resulting in a total of 648 analyses, performed with a validated numerical model in SAFIR software. The results in terms of bending resistance showed that the simplified method represents a strong tool for the fire design of slim floor beams.
- 1 September 2021
- Published by Emerald Publishing in Proceedings of the Institution of Civil Engineers - Structures and Buildings
- Vol. 174 (9) , 765-772
Fire protection assessment for the steel beams of a road bridge
The impact of a fire in an open car park situated under a road bridge was evaluated. In a highly ventilated space such as an open car park, fire may develop by spreading from one car to another. High temperatures may appear locally above burning cars and, in the case of flames impacting the bridge deck, the heat flux from each burning car may be added to different sections of the steel beams of the bridge. The purpose of the study was to determine the most severe fire scenario leading to the highest temperatures in unprotected steel beams of a bridge situated above an open car park. As a function of these temperatures and using standard temperature-time curve equivalence, the necessary fire protection of the steel beams was assessed. Temperatures were determined using the localised fire models of BS EN 1991-1-2:2002, together with the results of some fire tests on isolated cars and car parks existing in the literature. Considering the positions of cars in the car park, the maximum temperatures in the unprotected steel beams were obtained considering no more than five cars in the fire, as corresponding to statistics regarding fires in open car parks.
- 1 September 2021
- Published by Emerald Publishing in Proceedings of the Institution of Civil Engineers - Structures and Buildings
- Vol. 174 (9) , 765-772
Fire protection assessment for the steel beams of a road bridge
The impact of a fire in an open car park situated under a road bridge was evaluated. In a highly ventilated space such as an open car park, fire may develop by spreading from one car to another. High temperatures may appear locally above burning cars and, in the case of flames impacting the bridge deck, the heat flux from each burning car may be added to different sections of the steel beams of the bridge. The purpose of the study was to determine the most severe fire scenario leading to the highest temperatures in unprotected steel beams of a bridge situated above an open car park. As a function of these temperatures and using standard temperature-time curve equivalence, the necessary fire protection of the steel beams was assessed. Temperatures were determined using the localised fire models of BS EN 1991-1-2:2002, together with the results of some fire tests on isolated cars and car parks existing in the literature. Considering the positions of cars in the car park, the maximum temperatures in the unprotected steel beams were obtained considering no more than five cars in the fire, as corresponding to statistics regarding fires in open car parks.
- Open Access
- 18 January 2016
- Published by Czech Technical University in Prague - Central Library in Applications of Structural Fire Engineering
EXPERIMENTAL RESEARCH ON T-STUBS UNDER ELEVATED TEMPERATURES
Bolted end plate connections are widely used in multi-storey steel frame structures. Their design is based on the component method, which evaluates the behaviour of the basic components through equivalent T-stubs, to model the tension zone that constitutes the most relevant source of deformability. The paper presents the results of an experimental research on bolted T-stubs, tested under elevated temperatures, in normal and high strain rate loading conditions. The influence of the loading rate on the resistance and ductility of the T-stubs subjected to elevated temperatures is emphasized.
- 18 January 2016
- Published by Czech Technical University in Prague - Central Library in Applications of Structural Fire Engineering
Open AccessEXPERIMENTAL RESEARCH ON T-STUBS UNDER ELEVATED TEMPERATURES
Bolted end plate connections are widely used in multi-storey steel frame structures. Their design is based on the component method, which evaluates the behaviour of the basic components through equivalent T-stubs, to model the tension zone that constitutes the most relevant source of deformability. The paper presents the results of an experimental research on bolted T-stubs, tested under elevated temperatures, in normal and high strain rate loading conditions. The influence of the loading rate on the resistance and ductility of the T-stubs subjected to elevated temperatures is emphasized.
- Open Access
- 1 January 2016
- Published by Centre for Evaluation in Education and Science (CEON/CEES) in Journal of Applied Engineering Science
- Vol. 14 (2) , 275-284
Benchmark for numerical analysis of steel and composite floors exposed to fire using a general purpose FEM code
Increasing number of tests on structures in fire conditions offers valuable information regarding the global and local behaviour. The output data of these experiments can be considered to be a good opportunity for validation of numerical models. Nevertheless, in some fortuitous cases, inaccurate input of numerical models may lead to results matching the experimental ones. The validation and/ or verification of advanced calculation models for the fire design are an important issue not only for computer code developers, but also for designers and authorities. The validation of an advanced cal- culation model is usually linked with the comparison to experimental results, while the verification is related to the comparison to analytical solutions or to the results given by other computer codes. The paper presents a benchmark for both thermal and structural analysis of a composite floor subjected to fire using beam and shell elements. The numerical analysis is performed with a general purpose finite-element code. The input and the output of the thermo-mechanical analysis are detailed, with respect to a real scale fire test.
- 1 January 2016
- Published by Centre for Evaluation in Education and Science (CEON/CEES) in Journal of Applied Engineering Science
- Vol. 14 (2) , 275-284
Open AccessBenchmark for numerical analysis of steel and composite floors exposed to fire using a general purpose FEM code
Increasing number of tests on structures in fire conditions offers valuable information regarding the global and local behaviour. The output data of these experiments can be considered to be a good opportunity for validation of numerical models. Nevertheless, in some fortuitous cases, inaccurate input of numerical models may lead to results matching the experimental ones. The validation and/ or verification of advanced calculation models for the fire design are an important issue not only for computer code developers, but also for designers and authorities. The validation of an advanced cal- culation model is usually linked with the comparison to experimental results, while the verification is related to the comparison to analytical solutions or to the results given by other computer codes. The paper presents a benchmark for both thermal and structural analysis of a composite floor subjected to fire using beam and shell elements. The numerical analysis is performed with a general purpose finite-element code. The input and the output of the thermo-mechanical analysis are detailed, with respect to a real scale fire test.