QRQisen Ren

Qisen Ren

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Qisen Ren has a total of 29 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    A Study on the Radiation Resistance Performance of an Al2O3 Composite Tritium Permeation Barrier and Zirconium-Based Tritium-Absorbing Materials

    by Changzheng Li, Rui Shu, Yinghong Li, Long Wang, Runjie Fang, Lihong Nie, Qisen Ren, Xiang Liu, Jing Hu, Shaohong Zhang

    The permeation of tritium from secondary neutron source rods in nuclear power plants presents a significant and unavoidable safety concern both for internal equipment and the external environment. This study primarily explores two feasible strategies for tritium permeation barriers: coating stainless steel surfaces with tritium permeation barrier (TPB) materials and utilizing materials with excellent tritium absorption properties. Through external ion irradiation tests, a comparative analysis was conducted on the tritium permeation performance, morphology, and nanohardness changes in two tritium-resistant designs, specifically Cr2O3/Al2O3 composite coatings and a zirconium-based tritium-absorbing material under varying irradiation doses. The results indicate that both approaches exhibit exceptional radiation resistance, maintaining an effective tritium permeation reduction factor (PRF) even after irradiation.


  • Open Access

    Effect of Mechanical Damage on Tritium Permeability Resistance of FeAl/Al2O3 Coating on 316L Stainless Steel

    by Yinghong Li, Lihong Nie, Fantao Meng, Haixiang Hu, Sifan Zong, Zhihao Hong, Long Wang, Changzheng Li, Qisen Ren, Jing Hu

    Depositing a tritium permeation barrier on the surface of materials is a key method for reducing tritium permeability. During actual operational processes, the surface of the tritium permeation barrier may experience mechanical damage, such as spalling and scratches. The hydrogen permeability resistance of the coating will degrade due to such forms of mechanical damage. It is a significant engineering challenge to evaluate the impact of these damages on the coating’s tritium resistance. In this experiment, the mechanical damage to the FeAl/Al2O3 tritium permeation barrier on 316L stainless steel was simulated through scratching, debonding, and thermal shock. Subsequently, a hydrogen isotope gas drive permeation (GDP) test was conducted. The influence of the degree of mechanical damage on the coating’s tritium permeation behavior was assessed and discussed. The results indicate that, under the same damage mechanism, the coating’s tritium permeability resistance is positively correlated with the integrity of the coating. Additionally, the impact of scratches on the coating surface is more severe than that of other damage mechanisms.


  • Open Access

    Study on the Radiation Resistance Performance of Al2O3 Composite Tritium-Permeation-Barrier and Zirconium-Based Tritium Absorbing Materials

    by Changzheng Li, Rui Shu, Yinghong Li, Long Wang, Runjie Fang, Lihong Nie, Qisen Ren, Xiang Liu, Jing Hu, Shaohong Zhang

    The permeation of tritium from secondary neutron source rods in nuclear power plants presents a significant and unavoidable safety concern for both internal equipment and the external environment. This study primarily explores two feasible strategies for tritium permeation barriers: coating stainless steel surfaces with tritium-permeation-barrier (TPB) materials and utilizing materials with excellent tritium absorption properties. Through external ion irradiation tests, a comparative analysis was conducted on the tritium permeation performance, microstructure, and nano-hardness changes of two tritium-resistant designs, specifically Cr2O3/Al2O3 composite coatings, and a zirconium-based tritium-absorbing material under varying irradiation doses. The results indicate that both approaches exhibit exceptional radiation resistance, maintaining an effective tritium permeation reduction factor (PRF) even after irradiation.


  • Open Access

    Effect of Mechanical Damage on Tritium Permeability Resistance of FeAl/Al2O3 Coating on 316L Stainless Steel

    by Yinghong Li, Lihong Nie, Fantao Meng, Haixiang Hu, Sifan Zong, Zhihao Hong, Long Wang, Changzheng Li, Qisen Ren, Jing Hu

    A tritium resistant coating on the surface of materials is one of the main methods to reduce tritium permeability. In actual operating processes, mechanical damage such as spalling and scratches will occur on the surface of tritium resistant coatings. These mechanical damages will affect the hydrogen permeability resistance of the coatings. It is an important engineering problem that evaluate the effect of these damage on the tritium resistance of the coating. In this experiment, the mechanical damage of FeAl/Al2O3 tritium resistant coating on 316L stainless steel was simulated by scratching, debonding and thermal shock, and the gas hydrogen isotope permeation (GDP) test was carried out. The influence of mechanical damage degree on the tritium permeation behaviour of the coating was evaluated and discussed.

  • Open Access

    Study on the Thermophysical Properties of 80% 10B Enrichment of B4C

    by Zhipeng Lv, Haixiang Hu, Jin Cao, Shaofang Lin, Changzheng Li, Lihong Nie, Xuanpu Zhou, Qisen Ren, Qingyang Lv, Jing Hu

    In this paper, a specific type of Boron Carbide (B4C) with a high enrichment of 80 ± 0.3 at% 10B was prepared as an absorbing material for control rods in nuclear reactors. The enrichment of 10B was achieved using a chemical exchange method, followed by obtaining boron carbide powder through a carbothermal reduction method. Finally, B4C with a high enrichment of 68.3~74.2% theoretical density was obtained using a hot-pressed sintering process. This study focused on investigating the basic out-of-pile thermophysical properties of the high enrichment B4C compared to natural B4C reference pellets under non-irradiated conditions. These properties included the thermal expansion coefficient, thermal conductivity, emissivity, elastic limit, elastic modulus, and Poisson’s ratio. The research results indicate that the enriched B4C pellet exhibits good thermal stability and meets the technical requirements for mechanical capability. It was observed that porosity plays a significant role in determining the out-of-pile mechanical capability of B4C, with higher porosity samples having a lower thermal conductivity, elastic–plastic limit, and elastic modulus. In short, all the technical indexes studied meet the requirements of nuclear-grade Boron Carbide pellets for Pressurized Water Reactors.


  • Open Access

    Ion Irradiation Defects and Hardening in FeCrAl Alloy

    by Fang Li, Yunxiang Long, Daxi Guo, Liping Guo, Wenbin Lin, Yiheng Chen, Lei Li, Qisen Ren, Yehong Liao

    The self-ion irradiation experiments of FeCrAl and Y−FeCrAl alloys are carried out at 330 °C to 1–10 displacements per atom (dpa). The formation of dislocation loops in these alloys is investigated by transmission electron microscopy (TEM) and nano-indentation tests are used to assess the irradiation hardening. A large number of dislocation loops are formed after irradiation, and dislocation network gradually develops above 2.5 dpa. The average size of dislocation loops increases while the number density decreases when the dose was increased. In comparison to a/2 dislocation loops, a dislocation loops have a larger average size and higher proportion. Higher temperatures and dose rate can increase the proportion of a dislocation loops. As the dose is increasing, irradiation hardening increases. The addition of yttrium increases the proportion of a dislocation loops and reduces the irradiation hardening due to the high binding energy between yttrium atom and vacancy.