Sonali A. Beknalkar
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Sonali A. Beknalkar has a total of 22 co-authors. Here are the top co-authors by number of shared publications:
- Aviraj M. Teli.
Division of Electronics and Electrical Engineering, Dongguk University-Seoul, Seoul 04620, Republic of Korea
3 shared publications Jae Cheol Shin
Division of Electronics and Electrical Engineering Dongguk University‐Seoul Seoul 04620 Republic of Korea
3 shared publications- Manesh Ashok Yewale
School of Mechanical Engineering Yeungnam University Gyeongsan South Korea
2 shared publications Anup More
VVM's S G Patil Art's Science and Commerce College Sakri District Dhule Maharashtra 424304 India
1 shared publicationAviraj M. Teli
1 shared publication- Jae Cheol Shin
Division of Electronics and Electrical Engineering, Dongguk University-Seoul, Seoul 04620, Republic of Korea
1 shared publication
Latest Publications
- Open Access
Interfacial Electronic Reconstruction in Cu 2 O Modified Niobium Phosphate Oxide for Efficient Oxygen Evolution and High‐Performance Energy Storage
Developing multifunctional electrodes for simultaneous energy storage and conversion is essential for sustainable energy technologies. Herein, we report Cu 2 O coating on niobium phosphate creates a heterogeneous interface that promotes charge separation, reduces interfacial resistance, and stabilizes redox‐active Cu sites. Niobium phosphate acts as a chemically robust, ion‐friendly scaffold, while the Cu 2 O couple provides a dynamically active surface accelerating electron transfer and intermediate adsorption. The intimate NbP@Cu 2 O heterointerface induces interfacial charge redistribution and strong electronic coupling, enabling rapid charge transfer, accelerated ion diffusion, and enhanced electrochemical kinetics for improved reaction performance. Consequently, the NbP@Cu 2 O electrode delivers a high specific capacity of 23.40 F/cm 2 at 5 mA/cm 2 , approximately 2.4 times higher than pristine NbP, together with excellent rate capability and coulombic efficiency. The assembled device achieves a specific capacitance of 410 mF/cm 2 , an energy density of 128 μWh/cm 2 at a power density of 760 μW/cm 2 and demonstrated robust endurance over an extended 100000‐cycle test (65% retention; 0.00035% loss per cycle). Furthermore, the heterostructure exhibits outstanding OER activity with a low overpotential of 275.2 mV at 100 mA/cm 2 , a Tafel slope of 48.2 mV/dec, and stable operation for 120 h. These findings demonstrate the potential of phosphate‐oxide heterointerface engineering for advanced bifunctional energy storage and conversion applications. image
Open AccessInterfacial Electronic Reconstruction in Cu 2 O Modified Niobium Phosphate Oxide for Efficient Oxygen Evolution and High‐Performance Energy Storage
Developing multifunctional electrodes for simultaneous energy storage and conversion is essential for sustainable energy technologies. Herein, we report Cu 2 O coating on niobium phosphate creates a heterogeneous interface that promotes charge separation, reduces interfacial resistance, and stabilizes redox‐active Cu sites. Niobium phosphate acts as a chemically robust, ion‐friendly scaffold, while the Cu 2 O couple provides a dynamically active surface accelerating electron transfer and intermediate adsorption. The intimate NbP@Cu 2 O heterointerface induces interfacial charge redistribution and strong electronic coupling, enabling rapid charge transfer, accelerated ion diffusion, and enhanced electrochemical kinetics for improved reaction performance. Consequently, the NbP@Cu 2 O electrode delivers a high specific capacity of 23.40 F/cm 2 at 5 mA/cm 2 , approximately 2.4 times higher than pristine NbP, together with excellent rate capability and coulombic efficiency. The assembled device achieves a specific capacitance of 410 mF/cm 2 , an energy density of 128 μWh/cm 2 at a power density of 760 μW/cm 2 and demonstrated robust endurance over an extended 100000‐cycle test (65% retention; 0.00035% loss per cycle). Furthermore, the heterostructure exhibits outstanding OER activity with a low overpotential of 275.2 mV at 100 mA/cm 2 , a Tafel slope of 48.2 mV/dec, and stable operation for 120 h. These findings demonstrate the potential of phosphate‐oxide heterointerface engineering for advanced bifunctional energy storage and conversion applications. image
- 10 June 2025
- Published by Wiley in Small Methods
- Vol. 10 (2) , e2500757
A Novel NbPO 5 –CoFe 2 O 4 Hybrid Electrode Toward Enhanced Electrochemical Energy Storage and Conversion
In this study, a novel NbPO–CoFe composite electrode synthesized through a two‐step process combining hydrothermal growth and electrodeposition is reported. The resulting 3D architecture offers excellent conductivity, structural stability, and abundant electroactive sites due to the synergy between NbPO₅ nanorods and CoFe₂O₄ nanoparticles, enabling efficient charge transport and enhance redox kinetics for bifunctional energy applications. Electrochemical evaluation reveals NbPO–CoFe has a high areal capacitance of 15.09 F cm − 2 (2.52 mAh cm − 2 ) at 20 mA cm − 2 . An asymmetric supercapacitor device (NbPO–CoFe//AC) is fabricated that demonstrates excellent cycling stability retaining 85% of its capacitance and 95% coulombic efficiency till 45 000 cycles. Complementing experimental observations, machine learning analysis using the Prophet model forecasts enhanced long‐term stability, suggesting the composite's robust potential in practical applications. Beyond energy storage, the NbPO–CoFe composite demonstrates outstanding oxygen evolution reaction performance, with a low overpotential of 210 mV at 10 mA cm⁻ 2 , confirming its suitability for water‐splitting applications. The device's practical viability is further showcased by its ability to power red (≈1.5 V), green (≈2.0 V), and blue (≈3.0 V) LEDs. These findings position the NbPO–CoFe composite as a high‐performance, multifunctional electrode material with strong prospects in advanced electrochemical energy storage and sustainable catalysis technologies.
- 10 June 2025
- Published by Wiley in Small Methods
- Vol. 10 (2) , e2500757
A Novel NbPO 5 –CoFe 2 O 4 Hybrid Electrode Toward Enhanced Electrochemical Energy Storage and Conversion
In this study, a novel NbPO–CoFe composite electrode synthesized through a two‐step process combining hydrothermal growth and electrodeposition is reported. The resulting 3D architecture offers excellent conductivity, structural stability, and abundant electroactive sites due to the synergy between NbPO₅ nanorods and CoFe₂O₄ nanoparticles, enabling efficient charge transport and enhance redox kinetics for bifunctional energy applications. Electrochemical evaluation reveals NbPO–CoFe has a high areal capacitance of 15.09 F cm − 2 (2.52 mAh cm − 2 ) at 20 mA cm − 2 . An asymmetric supercapacitor device (NbPO–CoFe//AC) is fabricated that demonstrates excellent cycling stability retaining 85% of its capacitance and 95% coulombic efficiency till 45 000 cycles. Complementing experimental observations, machine learning analysis using the Prophet model forecasts enhanced long‐term stability, suggesting the composite's robust potential in practical applications. Beyond energy storage, the NbPO–CoFe composite demonstrates outstanding oxygen evolution reaction performance, with a low overpotential of 210 mV at 10 mA cm⁻ 2 , confirming its suitability for water‐splitting applications. The device's practical viability is further showcased by its ability to power red (≈1.5 V), green (≈2.0 V), and blue (≈3.0 V) LEDs. These findings position the NbPO–CoFe composite as a high‐performance, multifunctional electrode material with strong prospects in advanced electrochemical energy storage and sustainable catalysis technologies.
- 3 April 2025
- Published by Elsevier in Journal of Alloys and Compounds
- Vol. 1024
A critical review on piezoelectric supercapacitors: Fundamentals, recent advances, and future directions
- 3 April 2025
- Published by Elsevier in Journal of Alloys and Compounds
- Vol. 1024
A critical review on piezoelectric supercapacitors: Fundamentals, recent advances, and future directions