Heidi Olander Petersen
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Heidi Olander Petersen has a total of 33 co-authors. Here are the top co-authors by number of shared publications:
- Federico Casanova
Food Production Engineering Research Group (FPE), National Food Institute, Technical University of Denmark (DTU), 2800 Kongens Lyngby, Denmark
6 shared publications - Aberham Hailu Feyissa
Food Production Engineering Research Group (FPE), National Food Institute, Technical University of Denmark (DTU), 2800 Kongens Lyngby, Denmark
4 shared publications - Jens Jørgen Sloth
Technical University of Denmark
4 shared publications - Lucas Sales Queiroz
Food Production Engineering Research Group (FPE), National Food Institute, Technical University of Denmark (DTU), 2800 Kongens Lyngby, Denmark
3 shared publications - Naaman Francisco Nogueira Silva
Center of Natural Sciences, Federal University of São Carlos (UFSCar), Buri 18290-000, SP, Brazil
3 shared publications - Rodolphe Marie
Technical University of Denmark
3 shared publications
Latest Publications
- Open Access
Effects of Ultrasound-Assisted Extraction of Biofractions from Yellow Mealworm Larvae Fed a Probiotic-Enriched Diet
The increasing demand for sustainable protein sources has stimulated interest in edible insects such as Tenebrio molitor (yellow mealworm) larvae. While probiotics supplementation has been explored to improve insect growth performance, its impact on protein quality and downstream processing remains poorly understood. This study investigated the combined effects of probiotic-enriched diet supplementation during larval rearing and post-harvest ultrasound-assisted extraction (UST) on the protein and lipid fractions of yellow mealworm larvae. Three probiotic strains, namely, Pediococcus pentosaceus (PP), Bacillus velezensis (BV), and Bacillus coagulans (BC), were incorporated into larval diets and compared with a standard diet (without probiotics). Protein extraction was performed by both alkaline solubilization–isoelectric precipitation, which served as a control, and ultrasound application for 5, 15, and 25 min. The results from the trial found effects of both probiotics and UST, as well as their interaction, on the protein yield, although an improvement in yield was not obtained with increased sonication, and the BV group produced the highest yield among the probiotic treatment groups. In addition to this, the study did not find any effects associated with ultrasound pretreatment or probiotics on proximate composition and color, except fat % and increased lipid co-extraction, especially at longer durations. Probiotics, on the other hand, showed an influence on the fatty and amino acid profile, while they interacted with UST to affect the extracts’ content. This study did not find any effects on particle size, but the zeta potential was affected by probiotic diet enrichment. Similarly, the free SH content was influenced by sonication, while both probiotics and UST played a role in hydrophobicity. Regarding the solubility, it was found to be pH-dependent and ranged from 0 to ≈90%. Importantly, this study found that probiotics did not have any effect on protein solubility; however, UST had an effect at pH 2 and 7 but not at pH 11. In terms of hydrophobicity, both factors and their interactions were found to have an effect. Moreover, this study could not determine any effects on the inherent fluorescence absorbance of protein molecules. Apart from this, FTIR analysis revealed β-sheet-dominated secondary structures (≈41–47%), with treatment-dependent shifts in α-helix and β-turn contributions. The heat enthalpies associated with denaturation and melting temperature were influenced by sonication, where probiotics could not confer an effect. Overall, this study might demonstrate the strain-specific improvement in protein yield and modulation of the physicochemical functionality, as well as the nutritive value of the protein. Both biological factors and ultrasound-assisted extraction processes can act together to tailor the physicochemical and functional properties of biofractions, but more studies are needed for process optimization.
Open AccessEffects of Ultrasound-Assisted Extraction of Biofractions from Yellow Mealworm Larvae Fed a Probiotic-Enriched Diet
The increasing demand for sustainable protein sources has stimulated interest in edible insects such as Tenebrio molitor (yellow mealworm) larvae. While probiotics supplementation has been explored to improve insect growth performance, its impact on protein quality and downstream processing remains poorly understood. This study investigated the combined effects of probiotic-enriched diet supplementation during larval rearing and post-harvest ultrasound-assisted extraction (UST) on the protein and lipid fractions of yellow mealworm larvae. Three probiotic strains, namely, Pediococcus pentosaceus (PP), Bacillus velezensis (BV), and Bacillus coagulans (BC), were incorporated into larval diets and compared with a standard diet (without probiotics). Protein extraction was performed by both alkaline solubilization–isoelectric precipitation, which served as a control, and ultrasound application for 5, 15, and 25 min. The results from the trial found effects of both probiotics and UST, as well as their interaction, on the protein yield, although an improvement in yield was not obtained with increased sonication, and the BV group produced the highest yield among the probiotic treatment groups. In addition to this, the study did not find any effects associated with ultrasound pretreatment or probiotics on proximate composition and color, except fat % and increased lipid co-extraction, especially at longer durations. Probiotics, on the other hand, showed an influence on the fatty and amino acid profile, while they interacted with UST to affect the extracts’ content. This study did not find any effects on particle size, but the zeta potential was affected by probiotic diet enrichment. Similarly, the free SH content was influenced by sonication, while both probiotics and UST played a role in hydrophobicity. Regarding the solubility, it was found to be pH-dependent and ranged from 0 to ≈90%. Importantly, this study found that probiotics did not have any effect on protein solubility; however, UST had an effect at pH 2 and 7 but not at pH 11. In terms of hydrophobicity, both factors and their interactions were found to have an effect. Moreover, this study could not determine any effects on the inherent fluorescence absorbance of protein molecules. Apart from this, FTIR analysis revealed β-sheet-dominated secondary structures (≈41–47%), with treatment-dependent shifts in α-helix and β-turn contributions. The heat enthalpies associated with denaturation and melting temperature were influenced by sonication, where probiotics could not confer an effect. Overall, this study might demonstrate the strain-specific improvement in protein yield and modulation of the physicochemical functionality, as well as the nutritive value of the protein. Both biological factors and ultrasound-assisted extraction processes can act together to tailor the physicochemical and functional properties of biofractions, but more studies are needed for process optimization.
- Open Access
Effect of High-Intensity Ultrasound and Calcium Chelation on Functional Properties of Casein Micelles
Functional properties of caseins play a crucial role in the dairy industry, so it is important to develop methods to improve their functionality. The aim of this study is to investigate the combined effect of high-intensity ultrasound (HIUS) treatment and calcium chelation on functional properties of casein micelles. For this purpose, micellar casein concentrate (MCC) was prepared with a concentration of 3% (w/w) casein. Then, 0 and 10 mM of Disodium hydrogen phosphate was added. HIUS was performed at a frequency of 20 kHz, power intensity of 550 W/cm2, and an amplitude of 100% for 0, 5, 10, 15, and 20 min at 25 °C. Factorial design was employed to investigate the effect of ultrasound time (UST) and disodium phosphate (DSP) on foam capacity (FC), emulsion activity index (EAI), gelation time (GT), G′ at 480 min of oscillation time (G′480), slope of complex viscosity, and linear viscoelastic region (LVR). At 0 mM of DSP, increasing UST from 0 to 15 min decreased GT from 114.39 ± 3.20 to 83.52 ± 1.61 min, and it extended LVR from 40.36 ± 0.12 to 41.27 ± 0.27% of the applied strain. In addition, applying HIUS for 15 min increased the elasticity and firmness of MCC gel networks at 0 mM of DSP. G′480 was not influenced by UST, but it was reduced by DSP from 108.40 ± 3.29 to 15.78 ± 1.58 Pa. Increasing both UST and DSP significantly increased FC from 110.00 ± 13.23 to 163.33 ± 11.55% and foam stability (FS) in all treatments. FS reached its maximum (doubled) after 10 min of UST at 0 mM of DSP. However, EAI and emulsion stability index (ESI) decreased with increasing both UST and DSP. HIUS treatment combined with calcium chelation might highlight a new approach to improve foaming properties. However, regardless of calcium chelation, HIUS treatment is a promising technology to improve the gelling properties of casein micelles.
Open AccessEffect of High-Intensity Ultrasound and Calcium Chelation on Functional Properties of Casein Micelles
Functional properties of caseins play a crucial role in the dairy industry, so it is important to develop methods to improve their functionality. The aim of this study is to investigate the combined effect of high-intensity ultrasound (HIUS) treatment and calcium chelation on functional properties of casein micelles. For this purpose, micellar casein concentrate (MCC) was prepared with a concentration of 3% (w/w) casein. Then, 0 and 10 mM of Disodium hydrogen phosphate was added. HIUS was performed at a frequency of 20 kHz, power intensity of 550 W/cm2, and an amplitude of 100% for 0, 5, 10, 15, and 20 min at 25 °C. Factorial design was employed to investigate the effect of ultrasound time (UST) and disodium phosphate (DSP) on foam capacity (FC), emulsion activity index (EAI), gelation time (GT), G′ at 480 min of oscillation time (G′480), slope of complex viscosity, and linear viscoelastic region (LVR). At 0 mM of DSP, increasing UST from 0 to 15 min decreased GT from 114.39 ± 3.20 to 83.52 ± 1.61 min, and it extended LVR from 40.36 ± 0.12 to 41.27 ± 0.27% of the applied strain. In addition, applying HIUS for 15 min increased the elasticity and firmness of MCC gel networks at 0 mM of DSP. G′480 was not influenced by UST, but it was reduced by DSP from 108.40 ± 3.29 to 15.78 ± 1.58 Pa. Increasing both UST and DSP significantly increased FC from 110.00 ± 13.23 to 163.33 ± 11.55% and foam stability (FS) in all treatments. FS reached its maximum (doubled) after 10 min of UST at 0 mM of DSP. However, EAI and emulsion stability index (ESI) decreased with increasing both UST and DSP. HIUS treatment combined with calcium chelation might highlight a new approach to improve foaming properties. However, regardless of calcium chelation, HIUS treatment is a promising technology to improve the gelling properties of casein micelles.
- Open Access
Effects of Ultrasound Treatment on Emulsifying Properties of Pea Protein Isolates Obtained from Four Different Pea Flour Varieties
This study investigated the extraction and colloidal properties of pea protein isolates (PPIs) from four pea cultivars produced in a southern region in Italy. The control PPIs (C-PPIs) were obtained via an alkaline extraction and isoelectric precipitation method and then subjected to ultrasound treatment (US) to yield US-PPIs. The effects of cultivars and sonication on the physicochemical characteristics and emulsifying property of the PPIs were studied. Fourier-transform infrared (FTIR) spectroscopy, colorimetric measurement, dynamic light scattering (DLS), and confocal laser scanning microscopy (CLSM) were applied to characterize the samples. DLS results showed that C-PPIs displayed smaller particle sizes (8.86–15.9 µm) in comparison to US-PPIs (15.8–66.5 µm). DSC data showed that US-PPIs had improved thermal stability compared to control PPIs. FTIR analysis detected differences in the protein secondary structure of the various cultivars and between the native and US-PPIs. Emulsion stability studies indicated that emulsions stabilized with C-PPIs exhibited lower droplet sizes, implying improved stability in comparison to emulsions stabilized with US-PPIs. In conclusion, PPIs can be successfully extracted from different cultivars and applied as a natural emulsifier.
Open AccessEffects of Ultrasound Treatment on Emulsifying Properties of Pea Protein Isolates Obtained from Four Different Pea Flour Varieties
This study investigated the extraction and colloidal properties of pea protein isolates (PPIs) from four pea cultivars produced in a southern region in Italy. The control PPIs (C-PPIs) were obtained via an alkaline extraction and isoelectric precipitation method and then subjected to ultrasound treatment (US) to yield US-PPIs. The effects of cultivars and sonication on the physicochemical characteristics and emulsifying property of the PPIs were studied. Fourier-transform infrared (FTIR) spectroscopy, colorimetric measurement, dynamic light scattering (DLS), and confocal laser scanning microscopy (CLSM) were applied to characterize the samples. DLS results showed that C-PPIs displayed smaller particle sizes (8.86–15.9 µm) in comparison to US-PPIs (15.8–66.5 µm). DSC data showed that US-PPIs had improved thermal stability compared to control PPIs. FTIR analysis detected differences in the protein secondary structure of the various cultivars and between the native and US-PPIs. Emulsion stability studies indicated that emulsions stabilized with C-PPIs exhibited lower droplet sizes, implying improved stability in comparison to emulsions stabilized with US-PPIs. In conclusion, PPIs can be successfully extracted from different cultivars and applied as a natural emulsifier.
- Open Access
- 2 April 2024
- Published by Elsevier in Food Chemistry
- Vol. 449, 139177
Influence of the processing on composition, protein structure and techno-functional properties of mealworm protein concentrates produced by isoelectric precipitation and ultrafiltration/diafiltration
- 2 April 2024
- Published by Elsevier in Food Chemistry
- Vol. 449, 139177
Open AccessInfluence of the processing on composition, protein structure and techno-functional properties of mealworm protein concentrates produced by isoelectric precipitation and ultrafiltration/diafiltration
- Open Access
- 25 November 2022
- Published by MDPI AG in Marine Drugs
- Vol. 20 (12) , 739
Gelatin from Saithe (Pollachius virens) Skin: Biochemical Characterization and Oxidative Stability in O/W Emulsions
This study performed the extraction of gelatin from saithe (Pollachius virens) skin and compared it to commercial marine gelatin. As a first stage, we investigated the physicochemical and biochemical properties of the gelatin. SDS-PAGE analysis revealed the presence of α-chains, β-chains, and other high-molecular-weight aggregates. DSC thermograms showed typical gelatin behavior, while the FTIR spectra were mainly situated in the amide band region (amide A, amide B, amide I, amide II, and amide III). In the second stage, we produced O/W emulsions and analyzed their physical and oxidative stability over 9 days. Oil droplets stabilized with the gelatins obtained from saithe fish skin had a size of ~500 nm and a ζ-potential ~+25 mV, which is comparable to oil droplets stabilized with commercial gelatin products. Moreover, the oxidative stability of the emulsions stabilized with gelatin from saithe fish skin showed promising results in terms of preventing the formation of some volatile compounds towards the end of the storage period compared to when using the commercial gelatins. This study indicates the potential application of fish skin gelatin in the fields of food and cosmetics, as well as suggesting that further investigations of their techno-functional properties.
- 25 November 2022
- Published by MDPI AG in Marine Drugs
- Vol. 20 (12) , 739
Open AccessGelatin from Saithe (Pollachius virens) Skin: Biochemical Characterization and Oxidative Stability in O/W Emulsions
This study performed the extraction of gelatin from saithe (Pollachius virens) skin and compared it to commercial marine gelatin. As a first stage, we investigated the physicochemical and biochemical properties of the gelatin. SDS-PAGE analysis revealed the presence of α-chains, β-chains, and other high-molecular-weight aggregates. DSC thermograms showed typical gelatin behavior, while the FTIR spectra were mainly situated in the amide band region (amide A, amide B, amide I, amide II, and amide III). In the second stage, we produced O/W emulsions and analyzed their physical and oxidative stability over 9 days. Oil droplets stabilized with the gelatins obtained from saithe fish skin had a size of ~500 nm and a ζ-potential ~+25 mV, which is comparable to oil droplets stabilized with commercial gelatin products. Moreover, the oxidative stability of the emulsions stabilized with gelatin from saithe fish skin showed promising results in terms of preventing the formation of some volatile compounds towards the end of the storage period compared to when using the commercial gelatins. This study indicates the potential application of fish skin gelatin in the fields of food and cosmetics, as well as suggesting that further investigations of their techno-functional properties.
- Open Access
Physical Stability of Oil-In-Water Emulsion Stabilized by Gelatin from Saithe (Pollachius virens) Skin
The objective of the present study was to investigate the physical stability of an oil-in-water (O/W) emulsion stabilized with gelatin from saithe (Pollachius virens) skin obtained with three different extraction protocols compared to two commercial fish skin gelatins. We first investigated the gelatin powder composition, and then produced the O/W emulsions at pH 3 by mechanical dispersion followed by an ultrasonication process. Sodium dodecyl sulfate (SDS) profiles for commercial samples indicated that extensive and unspecific hydrolysis of collagen occurred during the production process, whereas gelatin extracted from saithe fish skin showed typical electrophoresis patterns of type I collagen, with the presence of γ- and β-chains. Emulsions obtained with commercial samples presented high physical stability over 7 days, with particle size of ~200 nm. However, emulsions obtained with saithe fish skin presented particle size between 300 and 450 nm. Slight differences were observed in viscosity, with values between ~1 and ~4 mPa·s. Interfacial tension measurements presented values between 13 and 17 mN·m−1 with three different regimes for all the systems.
Open AccessPhysical Stability of Oil-In-Water Emulsion Stabilized by Gelatin from Saithe (Pollachius virens) Skin
The objective of the present study was to investigate the physical stability of an oil-in-water (O/W) emulsion stabilized with gelatin from saithe (Pollachius virens) skin obtained with three different extraction protocols compared to two commercial fish skin gelatins. We first investigated the gelatin powder composition, and then produced the O/W emulsions at pH 3 by mechanical dispersion followed by an ultrasonication process. Sodium dodecyl sulfate (SDS) profiles for commercial samples indicated that extensive and unspecific hydrolysis of collagen occurred during the production process, whereas gelatin extracted from saithe fish skin showed typical electrophoresis patterns of type I collagen, with the presence of γ- and β-chains. Emulsions obtained with commercial samples presented high physical stability over 7 days, with particle size of ~200 nm. However, emulsions obtained with saithe fish skin presented particle size between 300 and 450 nm. Slight differences were observed in viscosity, with values between ~1 and ~4 mPa·s. Interfacial tension measurements presented values between 13 and 17 mN·m−1 with three different regimes for all the systems.