Filip Dodigović
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Filip Dodigović has a total of 28 co-authors. Here are the top co-authors by number of shared publications:
- Jasmin Jug
Faculty of Geotechnical Engineering, University of Zagreb, Hallerova aleja 7, 42000 Varaždin, Croatia
5 shared publications - Božo Soldo
University North
4 shared publications - Krešo Ivandić
Faculty of Geotechnical Engineering, University of Zagreb, Hallerova aleja 7, 42000 Varaždin, Croatia
3 shared publications - Meho Saša Kovačević
Faculty of Civil Engineering, University of Zagreb, Kačićeva 26, 10000 Zagreb, Croatia
3 shared publications - Stjepan Strelec
Faculty of Geotechnical Engineering, University of Zagreb, Hallerova aleja 7, 42000 Varaždin, Croatia
3 shared publications - Anja Bek
Faculty of Geotechnical Engineering, University of Zagreb, Hallerova aleja 7, 42000 Varaždin, Croatia
2 shared publications
Latest Publications
- Open Access
- 28 May 2026
- Published by MDPI AG in Sustainability
- Vol. 18 (11) , 5420
Environmental and Operational Risks in Jet Grouting: A Case-Based Source–Pathway–Receptor Framework for Monitoring and Trigger–Action Plan Development
Jet grouting (JG) is widely used for soil improvement, excavation support, and groundwater cut-off works, often under groundwater conditions and in proximity to sensitive receptors. The same high-energy erosion–mixing mechanisms that enable JG performance can also generate environmental and operational risks, including ground deformation, pore-water pressure transients, unintended hydraulic connectivity, accidental releases of grout or fluids, contaminant mobilisation, and groundwater-quality disturbance. This review synthesises field- and practice-based findings into a monitoring-oriented decision-support structure that links Source–Pathway–Receptor mechanisms with measurable early-warning indicators and predefined response actions. The study does not propose a new numerical or constitutive model; instead, it operationalises dispersed case-based evidence into a structured basis for project-specific monitoring and Trigger–Action Plan development. The analysis is organised into six recurring pathway classes: deformation response, pore-pressure and hydrogeological response, hydraulic incidents, contaminated-ground controls, barrier performance, and spoil/returns management. Across cases, escalation is rarely governed by a single absolute threshold. Instead, it is more reliably identified when an abnormal response increases with time, persists after jetting pauses, spreads beyond the expected influence zone, or is confirmed by more than one source of evidence, such as instrumentation, process behaviour, and field observations. Based on these patterns, the paper develops a generic, project-calibrated Trigger–Action Plan (TAP) structure to support risk-informed construction control, reduce environmental disturbance, protect groundwater and other sensitive receptors, and improve the environmental consistency of jet grouting practice.
- 28 May 2026
- Published by MDPI AG in Sustainability
- Vol. 18 (11) , 5420
Open AccessEnvironmental and Operational Risks in Jet Grouting: A Case-Based Source–Pathway–Receptor Framework for Monitoring and Trigger–Action Plan Development
Jet grouting (JG) is widely used for soil improvement, excavation support, and groundwater cut-off works, often under groundwater conditions and in proximity to sensitive receptors. The same high-energy erosion–mixing mechanisms that enable JG performance can also generate environmental and operational risks, including ground deformation, pore-water pressure transients, unintended hydraulic connectivity, accidental releases of grout or fluids, contaminant mobilisation, and groundwater-quality disturbance. This review synthesises field- and practice-based findings into a monitoring-oriented decision-support structure that links Source–Pathway–Receptor mechanisms with measurable early-warning indicators and predefined response actions. The study does not propose a new numerical or constitutive model; instead, it operationalises dispersed case-based evidence into a structured basis for project-specific monitoring and Trigger–Action Plan development. The analysis is organised into six recurring pathway classes: deformation response, pore-pressure and hydrogeological response, hydraulic incidents, contaminated-ground controls, barrier performance, and spoil/returns management. Across cases, escalation is rarely governed by a single absolute threshold. Instead, it is more reliably identified when an abnormal response increases with time, persists after jetting pauses, spreads beyond the expected influence zone, or is confirmed by more than one source of evidence, such as instrumentation, process behaviour, and field observations. Based on these patterns, the paper develops a generic, project-calibrated Trigger–Action Plan (TAP) structure to support risk-informed construction control, reduce environmental disturbance, protect groundwater and other sensitive receptors, and improve the environmental consistency of jet grouting practice.
- Open Access
- 18 December 2025
- Published by Faculty of Geotechnical Engineering, University of Zagreb in Environmental engineering
- Vol. 12 (1-2) , 80-96
Remote sensing and QGIS for regional landslide risk mapping
Varaždin County is underlain by Neogene and Quaternary clays and marls that are prone to landslides triggered by intense rainfall. In this study, a landslide risk assessment was carried out for nine municipalities during 2023–2025 using open-source QGIS software and Sentinel-2 imagery. The analysis integrated static factors (slope, aspect, land use) with the dynamic factor NDVI (Normalized Difference Vegetation Index) through Multi-Criteria Decision Analysis (MCDA) and a weighted linear combination. Slope was assigned the highest weight (40%), while NDVI contributed 20%. The results reveal clear spatial contrasts: mountainous municipalities (Donja Voća, Klenovnik, Bednja, Lepoglava, Ivanec) show high to very high landslide risk, whereas lowland municipalities along the Drava River (Cestica, Petrijanec, Maruševec) remain largely stable. Temporal differences are small, with 2023 showing the highest landslide risk and 2024 the lowest. NDVI-driven fluctuations reflect vegetation dynamics but are less influential than topography. Overall, the findings demonstrate the value of open data and free GIS tools for regional hazard mapping. The produced maps provide useful guidance for spatial planning and disaster risk management, while also pointing to the potential of integrating additional datasets in future studies to further improve the robustness of the approach.
- 18 December 2025
- Published by Faculty of Geotechnical Engineering, University of Zagreb in Environmental engineering
- Vol. 12 (1-2) , 80-96
Open AccessRemote sensing and QGIS for regional landslide risk mapping
Varaždin County is underlain by Neogene and Quaternary clays and marls that are prone to landslides triggered by intense rainfall. In this study, a landslide risk assessment was carried out for nine municipalities during 2023–2025 using open-source QGIS software and Sentinel-2 imagery. The analysis integrated static factors (slope, aspect, land use) with the dynamic factor NDVI (Normalized Difference Vegetation Index) through Multi-Criteria Decision Analysis (MCDA) and a weighted linear combination. Slope was assigned the highest weight (40%), while NDVI contributed 20%. The results reveal clear spatial contrasts: mountainous municipalities (Donja Voća, Klenovnik, Bednja, Lepoglava, Ivanec) show high to very high landslide risk, whereas lowland municipalities along the Drava River (Cestica, Petrijanec, Maruševec) remain largely stable. Temporal differences are small, with 2023 showing the highest landslide risk and 2024 the lowest. NDVI-driven fluctuations reflect vegetation dynamics but are less influential than topography. Overall, the findings demonstrate the value of open data and free GIS tools for regional hazard mapping. The produced maps provide useful guidance for spatial planning and disaster risk management, while also pointing to the potential of integrating additional datasets in future studies to further improve the robustness of the approach.
- 8 October 2024
- Published by Geotechnical Society of Bosnia and Herzegovina
- p. 119-127
GEOTECHNICAL INVESTIGATIONS FOR SCHOOL CONSTRUCTION
A series of earthquakes that commenced on December 28, 2020, resulted in extensive material damage within a 50-60 km radius from the epicenter, located near the City of Petrinja. Due to the significant structural damage sustained by the building of Petrinja Primary School I, a decision was made to construct a new school building. The construction of the new school began in 2022 and was completed in 2023. This study presents the findings of geotechnical investigations conducted at the site of the new school, which included five static cone penetration tests (CPTu), two dynamic probing heavy tests (DPH), one Marchetti dilatometer test (DMT), and two profiles of multi-channel analysis of surface waves (MASW). The geotechnical investigations resulted in the development of a soil profile consisting of eight distinct zones. Recommendations for the foundation design of the new building have been provided, alongside an assessment of the risk of soil liquefaction. The potential for liquefaction has been identified within zone 4, which comprises clayey sands at depths ranging from 4 to 6 meters.
- 8 October 2024
- Published by Geotechnical Society of Bosnia and Herzegovina
- p. 119-127
GEOTECHNICAL INVESTIGATIONS FOR SCHOOL CONSTRUCTION
A series of earthquakes that commenced on December 28, 2020, resulted in extensive material damage within a 50-60 km radius from the epicenter, located near the City of Petrinja. Due to the significant structural damage sustained by the building of Petrinja Primary School I, a decision was made to construct a new school building. The construction of the new school began in 2022 and was completed in 2023. This study presents the findings of geotechnical investigations conducted at the site of the new school, which included five static cone penetration tests (CPTu), two dynamic probing heavy tests (DPH), one Marchetti dilatometer test (DMT), and two profiles of multi-channel analysis of surface waves (MASW). The geotechnical investigations resulted in the development of a soil profile consisting of eight distinct zones. Recommendations for the foundation design of the new building have been provided, alongside an assessment of the risk of soil liquefaction. The potential for liquefaction has been identified within zone 4, which comprises clayey sands at depths ranging from 4 to 6 meters.
- Open Access
- 24 August 2024
- Published by MDPI AG in Geotechnics
- Vol. 4 (3) , 824-842
Analyzing MSW Landfill Failures: Stability and Reliability Evaluations from Five International Case Studies
This study investigates five cases of municipal solid waste (MSW) landfill slope failures in the USA, China, Sri Lanka, and Greece, with the aim of assessing the safety margins and reliability of these slopes. The stability and reliability of the landfill slopes were evaluated under both static and seismic loading conditions, using pre-failure geometries and geotechnical data, with analyses conducted in accordance with Eurocode 7, employing all three design approaches. Under static loading, the factors of safety were close to unity, and reliability indexes ranged from 1.0 to 2.8, both falling below the recommended values set by Eurocode. The landfill slopes failed to meet the stability criteria in Design Approaches 2 and 3, while in Design Approach 1, four out of five landfills met the criteria. Under seismic conditions, safety factors and reliability indexes were significantly lower than the prescribed criteria in all analyses. Sensitivity analyses revealed that in two cases, unit weight and friction angle were the dominant parameters, while cohesion was the dominant parameter in one case. The findings of this study underscore the importance of establishing minimum design requirements for MSW landfill slope stability to mitigate potential risks to public health and the environment.
- 24 August 2024
- Published by MDPI AG in Geotechnics
- Vol. 4 (3) , 824-842
Open AccessAnalyzing MSW Landfill Failures: Stability and Reliability Evaluations from Five International Case Studies
This study investigates five cases of municipal solid waste (MSW) landfill slope failures in the USA, China, Sri Lanka, and Greece, with the aim of assessing the safety margins and reliability of these slopes. The stability and reliability of the landfill slopes were evaluated under both static and seismic loading conditions, using pre-failure geometries and geotechnical data, with analyses conducted in accordance with Eurocode 7, employing all three design approaches. Under static loading, the factors of safety were close to unity, and reliability indexes ranged from 1.0 to 2.8, both falling below the recommended values set by Eurocode. The landfill slopes failed to meet the stability criteria in Design Approaches 2 and 3, while in Design Approach 1, four out of five landfills met the criteria. Under seismic conditions, safety factors and reliability indexes were significantly lower than the prescribed criteria in all analyses. Sensitivity analyses revealed that in two cases, unit weight and friction angle were the dominant parameters, while cohesion was the dominant parameter in one case. The findings of this study underscore the importance of establishing minimum design requirements for MSW landfill slope stability to mitigate potential risks to public health and the environment.
- Open Access
- 12 January 2024
- Published by MDPI AG in Sustainability
- Vol. 16 (2) , 675
Reliability of Municipal Solid Waste Landfills within the Eurocode Framework
Municipal solid waste (MSW) landfill slope failures can have significant consequences for the economy, environment, and human health. One potential cause of slope failure is insufficient reliability, resulting from inadequate design. The usual practice in the design of MSW landfills involves utilizing established geotechnical codes, such as Eurocode 7 (EC7), to perform slope stability assessments. Considering the substantial heterogeneity of MSW relative to soil, questions arise regarding the justification of such an approach in the design of MSW landfills. This study examines the suitability of applying EC7 in MSW landfill design, analyzing the stability and reliability of landfill slopes across various heights, front slope angles, design approaches, and consequence classes. This study finds that, in most cases considered, EC7 does not ensure an adequate level of reliability for MSW landfill slopes. Therefore, it is suggested that EC7 should be complemented with specific guidelines for incorporating MSW in geotechnical analyses to achieve the desired structural reliability. Adopting this strategy will not only enhance the reliability of landfill design but also promote the development of solutions that are economically and environmentally sustainable.
- 12 January 2024
- Published by MDPI AG in Sustainability
- Vol. 16 (2) , 675
Open AccessReliability of Municipal Solid Waste Landfills within the Eurocode Framework
Municipal solid waste (MSW) landfill slope failures can have significant consequences for the economy, environment, and human health. One potential cause of slope failure is insufficient reliability, resulting from inadequate design. The usual practice in the design of MSW landfills involves utilizing established geotechnical codes, such as Eurocode 7 (EC7), to perform slope stability assessments. Considering the substantial heterogeneity of MSW relative to soil, questions arise regarding the justification of such an approach in the design of MSW landfills. This study examines the suitability of applying EC7 in MSW landfill design, analyzing the stability and reliability of landfill slopes across various heights, front slope angles, design approaches, and consequence classes. This study finds that, in most cases considered, EC7 does not ensure an adequate level of reliability for MSW landfill slopes. Therefore, it is suggested that EC7 should be complemented with specific guidelines for incorporating MSW in geotechnical analyses to achieve the desired structural reliability. Adopting this strategy will not only enhance the reliability of landfill design but also promote the development of solutions that are economically and environmentally sustainable.
- Open Access
- 4 April 2022
- Published by Periodica Polytechnica Budapest University of Technology and Economics in Periodica Polytechnica Civil Engineering
- Vol. 66 (3) , 710-719
Probabilistic Evaluations of Prescribed Safety Margins in Eurocode 7 for Spread Foundations
According to the design code Eurocode 7, analysis procedures require reaching a prescribed safety margin, based on the conditions of levelling design action and design resistance. Such semi-probabilistic procedures do not result in a consistent equivalent value of the Overall Factor of Safety (OFS), neither in individual analysis nor in different tasks in geotechnical engineering. Furthermore, the implementation of different calculation approaches in Eurocode 7 also does not guarantee an equal probability of the occurrence of a relevant limit state. A comparative analysis is conducted for an example of a centrically loaded spread foundation on homogenous, isotropic, and coarse-grained soil, according to procedures in Eurocode 7, Design Approach 3. An algorithm is developed to estimate failure probability, taking into consideration the relevant statistical characteristics of each calculation parameter. A significant influence of the statistical characteristics of the relevant sample is emphasized. The degree of required modification of the equivalent Overdesign Factor (ODF) and the Overall Factor of Safety (OFS), based on the criterion of the required reliability index β and failure probability pf , is quantified.
- 4 April 2022
- Published by Periodica Polytechnica Budapest University of Technology and Economics in Periodica Polytechnica Civil Engineering
- Vol. 66 (3) , 710-719
Open AccessProbabilistic Evaluations of Prescribed Safety Margins in Eurocode 7 for Spread Foundations
According to the design code Eurocode 7, analysis procedures require reaching a prescribed safety margin, based on the conditions of levelling design action and design resistance. Such semi-probabilistic procedures do not result in a consistent equivalent value of the Overall Factor of Safety (OFS), neither in individual analysis nor in different tasks in geotechnical engineering. Furthermore, the implementation of different calculation approaches in Eurocode 7 also does not guarantee an equal probability of the occurrence of a relevant limit state. A comparative analysis is conducted for an example of a centrically loaded spread foundation on homogenous, isotropic, and coarse-grained soil, according to procedures in Eurocode 7, Design Approach 3. An algorithm is developed to estimate failure probability, taking into consideration the relevant statistical characteristics of each calculation parameter. A significant influence of the statistical characteristics of the relevant sample is emphasized. The degree of required modification of the equivalent Overdesign Factor (ODF) and the Overall Factor of Safety (OFS), based on the criterion of the required reliability index β and failure probability pf , is quantified.
- 4 February 2022
- Published by University North in Tehnički glasnik
- Vol. 16 (1) , 8-15
Calibration of Undrained Shear Strength Partial Factor Using Probability Theory
Design in accordance with Eurocode 7 applies the partial factors of geotechnical parameters to take into account uncertainties of various sources. The prescribed values of partial factors are unique, even though the degree of uncertainty can vary sig...
- 4 February 2022
- Published by University North in Tehnički glasnik
- Vol. 16 (1) , 8-15
Calibration of Undrained Shear Strength Partial Factor Using Probability Theory
Design in accordance with Eurocode 7 applies the partial factors of geotechnical parameters to take into account uncertainties of various sources. The prescribed values of partial factors are unique, even though the degree of uncertainty can vary sig...
- Open Access
CPT—DMT Correlations on Regional Soils from Croatia
This paper was prepared based on in situ measurements carried out by the authors using the CPTu and DMT static penetration probes. The list of study sites includes seven specific locations in the northern parts of Croatia and one study site on the southern border of the country. The sites were selected based on the criterion of soil type, which falls into the category of soft to firm, slightly over-consolidated silty clays and silty sands. Intermediate soils are prevalent in the wider region, and most engineers deal with them in their everyday practice. For this reason, local characterization is of most importance for engineering purposes. In this investigation, results of in-situ tests are compared in order to validate the quality of the constrained modulus obtained from a CPT test to the one obtained by a DMT flat dilatometer. A comparison was made between the CPT test cone resistance and two DMT parameters—normalized modulus and horizontal stress index . Dependencies were analyzed for the main soil groups and intermediate data groups. Clay soils were divided into two subgroups based on the identification parameter , while silty soils were analyzed in three subgroups. The results for each subgroup differed significantly, and the analyses showed deviations from published values, especially for the intermediate soil groups. The usefulness of the application is demonstrated with examples at two sites, showing improvements over the most commonly used formula for the constrained modulus from the CPT test.Open AccessCPT—DMT Correlations on Regional Soils from Croatia
This paper was prepared based on in situ measurements carried out by the authors using the CPTu and DMT static penetration probes. The list of study sites includes seven specific locations in the northern parts of Croatia and one study site on the southern border of the country. The sites were selected based on the criterion of soil type, which falls into the category of soft to firm, slightly over-consolidated silty clays and silty sands. Intermediate soils are prevalent in the wider region, and most engineers deal with them in their everyday practice. For this reason, local characterization is of most importance for engineering purposes. In this investigation, results of in-situ tests are compared in order to validate the quality of the constrained modulus obtained from a CPT test to the one obtained by a DMT flat dilatometer. A comparison was made between the CPT test cone resistance and two DMT parameters—normalized modulus and horizontal stress index . Dependencies were analyzed for the main soil groups and intermediate data groups. Clay soils were divided into two subgroups based on the identification parameter , while silty soils were analyzed in three subgroups. The results for each subgroup differed significantly, and the analyses showed deviations from published values, especially for the intermediate soil groups. The usefulness of the application is demonstrated with examples at two sites, showing improvements over the most commonly used formula for the constrained modulus from the CPT test. - Open Access
- 10 September 2021
- Published by MDPI AG in Applied Sciences
- Vol. 11 (18) , 8423
Modified, Reliability-Based Robust Geotechnical Design Method, in Accordance with Eurocode 7
In this paper a modification of the reliability-based robust geotechnical design (RGD) method is proposed. The intention of the proposed modifications is to simplify the method, make it less computationally expensive, and harmonise of the results with Eurocode 7. The complexity of the RGD method mainly stems from the calculation of the design’s robustness measure, which is the feasibility robustness index (). Due to this fact, the replacing of the existing robustness measure with a generalised reliability index () is considered. It was demonstrated that fits into the robustness concept, and is traditionally used as a construction reliability measure, making it intuitive and “user friendly”. It is proposed to conduct a sensitivity analysis using Soboli indices, with the aim of freezing the variables whose contribution to the system response variance is negligible, which will further simplify the method. By changing the robustness measure, the number of the required reliability analyses is significantly decreased. Further reduction is achieved by conducting analyses only for the designs chosen in the scope of the genetic algorithm. The original RGD method is used as an extension of traditional reliability-based design. By applying the proposed modifications, the RGD method can be used as an alternative to the classic and reliability-based design method.- 10 September 2021
- Published by MDPI AG in Applied Sciences
- Vol. 11 (18) , 8423
Open AccessModified, Reliability-Based Robust Geotechnical Design Method, in Accordance with Eurocode 7
In this paper a modification of the reliability-based robust geotechnical design (RGD) method is proposed. The intention of the proposed modifications is to simplify the method, make it less computationally expensive, and harmonise of the results with Eurocode 7. The complexity of the RGD method mainly stems from the calculation of the design’s robustness measure, which is the feasibility robustness index (). Due to this fact, the replacing of the existing robustness measure with a generalised reliability index () is considered. It was demonstrated that fits into the robustness concept, and is traditionally used as a construction reliability measure, making it intuitive and “user friendly”. It is proposed to conduct a sensitivity analysis using Soboli indices, with the aim of freezing the variables whose contribution to the system response variance is negligible, which will further simplify the method. By changing the robustness measure, the number of the required reliability analyses is significantly decreased. Further reduction is achieved by conducting analyses only for the designs chosen in the scope of the genetic algorithm. The original RGD method is used as an extension of traditional reliability-based design. By applying the proposed modifications, the RGD method can be used as an alternative to the classic and reliability-based design method. - Open Access
- 15 January 2021
- Published by MDPI AG in Applied Sciences
- Vol. 11 (2) , 795
Error Evaluation and Suitability Assessment of Common Reliability Methods in the Case of Shallow Foundations
A geotechnical structure’s reliability index calculated using identical input parameters and assumptions can significantly vary as a function of the used method. The different approaches to solving the reliability problem could result in an error which depends on many factors. The most important error sources are the complexity of the performance function, the number of random variables, their mutual correlations, and marginal statistical distributions. A review of relevant literature in the field of reliability in geotechnical engineering revealed a lack of information on the errors of individual reliability methods for geotechnical problems and general criteria for assessing their suitability concerning the error size. The paper defines the reliability method error and proposes criteria for assessing the suitability of reliability methods in geotechnical engineering. Based on the proposed criteria, the suitability of common reliability methods was evaluated in the example of a shallow foundation, analysed according to Eurocode 7, DA 3, such that . It is shown that due to the mathematically complex expression of the reliability integral, methods that are easier to use result in a larger error and are not suitable for a reliability analysis of shallow foundations. Sophisticated methods are more accurate but require specific knowledge and resources that are not often used in daily engineering practice.- 15 January 2021
- Published by MDPI AG in Applied Sciences
- Vol. 11 (2) , 795
Open AccessError Evaluation and Suitability Assessment of Common Reliability Methods in the Case of Shallow Foundations
A geotechnical structure’s reliability index calculated using identical input parameters and assumptions can significantly vary as a function of the used method. The different approaches to solving the reliability problem could result in an error which depends on many factors. The most important error sources are the complexity of the performance function, the number of random variables, their mutual correlations, and marginal statistical distributions. A review of relevant literature in the field of reliability in geotechnical engineering revealed a lack of information on the errors of individual reliability methods for geotechnical problems and general criteria for assessing their suitability concerning the error size. The paper defines the reliability method error and proposes criteria for assessing the suitability of reliability methods in geotechnical engineering. Based on the proposed criteria, the suitability of common reliability methods was evaluated in the example of a shallow foundation, analysed according to Eurocode 7, DA 3, such that . It is shown that due to the mathematically complex expression of the reliability integral, methods that are easier to use result in a larger error and are not suitable for a reliability analysis of shallow foundations. Sophisticated methods are more accurate but require specific knowledge and resources that are not often used in daily engineering practice.