Philipp Ernst
Philipp Ernst has a total of 33 co-authors. Here are the top co-authors by number of shared publications:
- Nick Wierckx
Forschungszentrum Jülich
4 shared publications Astrid Wirtz
Institute of Bio- and Geosciences IBG-1: Biotechnology, Forschungszentrum Jülich GmbH, Wilhelm-Johnen-Straße, 52428 Jülich, Germany
2 shared publicationsBenedikt Wynands
Institute of Bio- and Geosciences IBG-1: Biotechnology, Forschungszentrum Jülich GmbH, Wilhelm-Johnen-Straße, 52428 Jülich, Germany
2 shared publications- Jochem Gätgens
Forschungszentrum Jülich Institute of Bio‐ and Geosciences, IBG‐1: Biotechnology Jülich Germany
2 shared publications - Lars Matthias Blank
Institute of Applied Microbiology – iAMB, Aachen Biology and Biotechnology – ABBt, Worringer Weg 1, RWTH Aachen University, D-52074, Aachen, Germany
2 shared publications - Andreas Jupke
Fluid Process Engineering (AVT.FVT) RWTH Aachen University Aachen Germany
1 shared publication
Latest Publications
- Open Access
- 2 November 2026
- Published by Wiley in Microbial Biotechnology
- Vol. 19 (11)
Systematic Evaluation of Cyanidioschyzon merolae Across Photobioreactor Systems: Linking Reactor Design to Biomass Production and Biochemical Composition
Extremophilic red microalgae are promising platforms for sustainable biotechnology, combining robust growth under selective thermoacidophilic conditions with production of thermostable phycobiliproteins and carbon‐rich biomass. However, reactor‐dependent effects on growth, product formation, and biomass composition remain insufficiently resolved. Here, we systematically evaluated the extremophilic red microalga Cyanidioschyzon merolae across cultivation scales and reactor formats and benchmarked its performance against the well‐established Galdieria javensis and Limnospira platensis . In small‐scale multi‐cultivator photobioreactors and microfluidic growth chambers, C. merolae showed superior growth, reaching a maximum growth rate of 0.034 ± 0.001 h −1 and 8.3 ± 0.3 g L −1 cell dry weight. Microfluidic cultivation enabled growth analysis at single‐cell resolution and matched growth rates obtained in photobioreactors. To identify scalable production strategies, C. merolae was further cultivated in a flat‐panel photobioreactor (FPR) and a custom‐designed internally illuminated photobioreactor (IIPBR). The custom‐designed photobioreactor delivered the highest biomass concentration and productivity, yielding 11.5 ± 0.6 g L −1 cell dry weight and 1.07 ± 0.06 g L −1 d −1 , and comparable yields with regard to R‐phycocyanin and R‐allophycocyanin (R‐APC). Biomass analysis revealed substantial carbon and nitrogen contents, starch accumulation up to > 20% of cell dry weight, and fatty acids dominated by palmitic, linoleic, and oleic acids. Despite its reduced cell wall fraction, C. merolae contained structurally diverse, cultivation‐dependent polysaccharides. These results establish C. merolae as a versatile chassis for thermostable pigment production and renewable feedstock generation, highlighting photobioreactor design as a key determinant of productivity and biomass quality.
- 2 November 2026
- Published by Wiley in Microbial Biotechnology
- Vol. 19 (11)
Open AccessSystematic Evaluation of Cyanidioschyzon merolae Across Photobioreactor Systems: Linking Reactor Design to Biomass Production and Biochemical Composition
Extremophilic red microalgae are promising platforms for sustainable biotechnology, combining robust growth under selective thermoacidophilic conditions with production of thermostable phycobiliproteins and carbon‐rich biomass. However, reactor‐dependent effects on growth, product formation, and biomass composition remain insufficiently resolved. Here, we systematically evaluated the extremophilic red microalga Cyanidioschyzon merolae across cultivation scales and reactor formats and benchmarked its performance against the well‐established Galdieria javensis and Limnospira platensis . In small‐scale multi‐cultivator photobioreactors and microfluidic growth chambers, C. merolae showed superior growth, reaching a maximum growth rate of 0.034 ± 0.001 h −1 and 8.3 ± 0.3 g L −1 cell dry weight. Microfluidic cultivation enabled growth analysis at single‐cell resolution and matched growth rates obtained in photobioreactors. To identify scalable production strategies, C. merolae was further cultivated in a flat‐panel photobioreactor (FPR) and a custom‐designed internally illuminated photobioreactor (IIPBR). The custom‐designed photobioreactor delivered the highest biomass concentration and productivity, yielding 11.5 ± 0.6 g L −1 cell dry weight and 1.07 ± 0.06 g L −1 d −1 , and comparable yields with regard to R‐phycocyanin and R‐allophycocyanin (R‐APC). Biomass analysis revealed substantial carbon and nitrogen contents, starch accumulation up to > 20% of cell dry weight, and fatty acids dominated by palmitic, linoleic, and oleic acids. Despite its reduced cell wall fraction, C. merolae contained structurally diverse, cultivation‐dependent polysaccharides. These results establish C. merolae as a versatile chassis for thermostable pigment production and renewable feedstock generation, highlighting photobioreactor design as a key determinant of productivity and biomass quality.
- Open Access
- 15 November 2024
- Published by Elsevier in Metabolic Engineering Communications
- Vol. 19, e00252
Selective production of the itaconic acid-derived compounds 2-hydroxyparaconic and itatartaric acid
- 15 November 2024
- Published by Elsevier in Metabolic Engineering Communications
- Vol. 19, e00252
Open AccessSelective production of the itaconic acid-derived compounds 2-hydroxyparaconic and itatartaric acid
- Open Access
- 9 January 2024
- Published by Oxford University Press (OUP) in FEMS Yeast Research
- Vol. 24
Establishing an itaconic acid production process with Ustilago species on the low-cost substrate starch
Ustilago maydis and Ustilago cynodontis are natural producers of a broad range of valuable molecules including itaconate, malate, glycolipids, and triacylglycerols. Both Ustilago species are insensitive toward medium impurities, and have previously been engineered for efficient itaconate production and stabilized yeast-like growth. Due to these features, these strains were already successfully used for the production of itaconate from different alternative feedstocks such as molasses, thick juice, and crude glycerol. Here, we analyzed the amylolytic capabilities of Ustilago species for metabolization of starch, a highly abundant and low-cost polymeric carbohydrate widely utilized as a substrate in several biotechnological processes. Ustilago cynodontis was found to utilize gelatinized potato starch for both growth and itaconate production, confirming the presence of extracellular amylolytic enzymes in Ustilago species. Starch was rapidly degraded by U. cynodontis, even though no α-amylase was detected. Further experiments indicate that starch hydrolysis is caused by the synergistic action of glucoamylase and α-glucosidase enzymes. The enzymes showed a maximum activity of around 0.5 U ml−1 at the fifth day after inoculation, and also released glucose from additional substrates, highlighting potential broader applications. In contrast to U. cynodontis, U. maydis showed no growth on starch accompanied with no detectable amylolytic activity.
- 9 January 2024
- Published by Oxford University Press (OUP) in FEMS Yeast Research
- Vol. 24
Open AccessEstablishing an itaconic acid production process with Ustilago species on the low-cost substrate starch
Ustilago maydis and Ustilago cynodontis are natural producers of a broad range of valuable molecules including itaconate, malate, glycolipids, and triacylglycerols. Both Ustilago species are insensitive toward medium impurities, and have previously been engineered for efficient itaconate production and stabilized yeast-like growth. Due to these features, these strains were already successfully used for the production of itaconate from different alternative feedstocks such as molasses, thick juice, and crude glycerol. Here, we analyzed the amylolytic capabilities of Ustilago species for metabolization of starch, a highly abundant and low-cost polymeric carbohydrate widely utilized as a substrate in several biotechnological processes. Ustilago cynodontis was found to utilize gelatinized potato starch for both growth and itaconate production, confirming the presence of extracellular amylolytic enzymes in Ustilago species. Starch was rapidly degraded by U. cynodontis, even though no α-amylase was detected. Further experiments indicate that starch hydrolysis is caused by the synergistic action of glucoamylase and α-glucosidase enzymes. The enzymes showed a maximum activity of around 0.5 U ml−1 at the fifth day after inoculation, and also released glucose from additional substrates, highlighting potential broader applications. In contrast to U. cynodontis, U. maydis showed no growth on starch accompanied with no detectable amylolytic activity.
- Open Access
- 14 June 2023
- Published by MDPI AG in Bioengineering
- Vol. 10 (6) , 723
Holistic Approach to Process Design and Scale-Up for Itaconic Acid Production from Crude Substrates
Bio-based bulk chemicals such as carboxylic acids continue to struggle to compete with their fossil counterparts on an economic basis. One possibility to improve the economic feasibility is the use of crude substrates in biorefineries. However, impurities in these substrates pose challenges in fermentation and purification, requiring interdisciplinary research. This work demonstrates a holistic approach to biorefinery process development, using itaconic acid production on thick juice based on sugar beets with Ustilago sp. as an example. A conceptual process design with data from artificially prepared solutions and literature data from fermentation on glucose guides the simultaneous development of the upstream and downstream processes up to a 100 L scale. Techno-economic analysis reveals substrate consumption as the main constituent of production costs and therefore, the product yield is the driver of process economics. Aligning pH-adjusting agents in the fermentation and the downstream process is a central lever for product recovery. Experiments show that fermentation can be transferred from glucose to thick juice by changing the feeding profile. In downstream processing, an additional decolorization step is necessary to remove impurities accompanying the crude substrate. Moreover, we observe an increased use of pH-adjusting agents compared to process simulations.
- 14 June 2023
- Published by MDPI AG in Bioengineering
- Vol. 10 (6) , 723
Open AccessHolistic Approach to Process Design and Scale-Up for Itaconic Acid Production from Crude Substrates
Bio-based bulk chemicals such as carboxylic acids continue to struggle to compete with their fossil counterparts on an economic basis. One possibility to improve the economic feasibility is the use of crude substrates in biorefineries. However, impurities in these substrates pose challenges in fermentation and purification, requiring interdisciplinary research. This work demonstrates a holistic approach to biorefinery process development, using itaconic acid production on thick juice based on sugar beets with Ustilago sp. as an example. A conceptual process design with data from artificially prepared solutions and literature data from fermentation on glucose guides the simultaneous development of the upstream and downstream processes up to a 100 L scale. Techno-economic analysis reveals substrate consumption as the main constituent of production costs and therefore, the product yield is the driver of process economics. Aligning pH-adjusting agents in the fermentation and the downstream process is a central lever for product recovery. Experiments show that fermentation can be transferred from glucose to thick juice by changing the feeding profile. In downstream processing, an additional decolorization step is necessary to remove impurities accompanying the crude substrate. Moreover, we observe an increased use of pH-adjusting agents compared to process simulations.
- Open Access
- 31 December 2020
- Published by MDPI AG in Journal of Fungi
- Vol. 7 (1) , 20
An Optimized Ustilago maydis for Itaconic Acid Production at Maximal Theoretical Yield
Ustilago maydis, a member of the Ustilaginaceae family, is a promising host for the production of several metabolites including itaconic acid. This dicarboxylate has great potential as a bio-based building block in the polymer industry, and is of special interest for pharmaceutical applications. Several itaconate overproducing Ustilago strains have been generated by metabolic and morphology engineering. This yielded stabilized unicellular morphology through fuz7 deletion, reduction of by-product formation through deletion of genes responsible for itaconate oxidation and (glyco)lipid production, and the overexpression of the regulator of the itaconate cluster ria1 and the mitochondrial tricarboxylate transporter encoded by mttA from Aspergillusterreus. In this study, itaconate production was further optimized by consolidating these different optimizations into one strain. The combined modifications resulted in itaconic acid production at theoretical maximal yield, which was achieved under biotechnologically relevant fed-batch fermentations with continuous feed.
- 31 December 2020
- Published by MDPI AG in Journal of Fungi
- Vol. 7 (1) , 20
Open AccessAn Optimized Ustilago maydis for Itaconic Acid Production at Maximal Theoretical Yield
Ustilago maydis, a member of the Ustilaginaceae family, is a promising host for the production of several metabolites including itaconic acid. This dicarboxylate has great potential as a bio-based building block in the polymer industry, and is of special interest for pharmaceutical applications. Several itaconate overproducing Ustilago strains have been generated by metabolic and morphology engineering. This yielded stabilized unicellular morphology through fuz7 deletion, reduction of by-product formation through deletion of genes responsible for itaconate oxidation and (glyco)lipid production, and the overexpression of the regulator of the itaconate cluster ria1 and the mitochondrial tricarboxylate transporter encoded by mttA from Aspergillusterreus. In this study, itaconate production was further optimized by consolidating these different optimizations into one strain. The combined modifications resulted in itaconic acid production at theoretical maximal yield, which was achieved under biotechnologically relevant fed-batch fermentations with continuous feed.
- Open Access
- 23 November 2020
- Published by MDPI AG in Preprints.org
An Optimized Ustilago Chassis for Itaconic Acid Production at Theoretical Maximal Yield
Ustilago maydis, member of the Ustilaginaceae family, is a promising host for the production of several metabolites including itaconic acid. This dicarboxylate has great potential as a bio-based building block in the polymer industry, and is of special interest for pharmaceutical applications. Several itaconate overproducing Ustilago strains have been generated by metabolic and morphology engineering. This yielded stabilized unicellular morphology through fuz7 deletion, reduction of by-product formation through deletion of genes responsible for itaconate oxidation and (glyco)lipid production, and the overexpression of the regulator of the itaconate cluster ria1 and the mitochondrial tricarboxylate transporter encoded by mttA from Aspergillus terreus. In this study, itaconate production was further optimized by consolidating these different optimizations into one strain. The combined modifications resulted in itaconic acid production at theoretical maximal yield, which was achieved under biotechnologically relevant fed-batch fermentations with continuous feed.
- 23 November 2020
- Published by MDPI AG in Preprints.org
Open AccessAn Optimized Ustilago Chassis for Itaconic Acid Production at Theoretical Maximal Yield
Ustilago maydis, member of the Ustilaginaceae family, is a promising host for the production of several metabolites including itaconic acid. This dicarboxylate has great potential as a bio-based building block in the polymer industry, and is of special interest for pharmaceutical applications. Several itaconate overproducing Ustilago strains have been generated by metabolic and morphology engineering. This yielded stabilized unicellular morphology through fuz7 deletion, reduction of by-product formation through deletion of genes responsible for itaconate oxidation and (glyco)lipid production, and the overexpression of the regulator of the itaconate cluster ria1 and the mitochondrial tricarboxylate transporter encoded by mttA from Aspergillus terreus. In this study, itaconate production was further optimized by consolidating these different optimizations into one strain. The combined modifications resulted in itaconic acid production at theoretical maximal yield, which was achieved under biotechnologically relevant fed-batch fermentations with continuous feed.