ZCZilong Cheng

Zilong Cheng

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article

Previous Organizations / Institutes

The organizations / institutes from the scholar's other articles in the past ten years


Zilong Cheng has a total of 33 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Robust Precision Motion Control of Dual-Drive Gantry-Type Cartesian Robot With Workspace Constraints

    by Wenxin Wang, Jun Ma, Zilong Cheng, Zicheng Zhu, Yuanjie Xian, Clarence W. de Silva, Tong Heng Lee

    Automated motion control tasks would typically arise as essential and critical parts of the operations for complex industrial systems when there exists multiple necessary requirements, such as high precision, low energy consumption, and effective collision avoidance. These motion control tasks invariably also involve workspace constraints to the system. Also as an inevitably encountered challenge, various factors bring model uncertainty and external disturbance to the system, leading to the deviations between the obtained solution and the optimum, particularly for systems with nonlinear characteristics. Considering these issues, this article proposes a robust precision motion control scheme via iterative linear quadratic regulator for planar motion tasks of a flexure-joint gantry-type Cartesian robot. Essentially in the methodology developed here, the model uncertainty and external disturbance of the gantry robot are suppressed through an integral adaptive sliding-mode controller, and a projection scheme is deployed to deal with various constraints from the workspace so that the gantry robot can automatically adjust its trajectories in planar motion tasks. In addition, the desired convergence outcome of the proposed method and also the resulting closed-loop stability of the system are rigorously proved. This approach, thus, renders it possible to achieve improved system performance even when there does not exist a fully accurate system model (which is rather typical in practical situations). Moreover, real-time experiments in two types of motion tasks are designed to validate the effectiveness and applicability of the proposed method.


  • Alternating Direction Method of Multipliers-Based Parallel Optimization for Multi-Agent Collision-Free Model Predictive Control

    by Zilong Cheng, Jun Ma, Wenxin Wang, Zicheng Zhu, Clarence W. de Silva, Tong Heng Lee

    This paper investigates the collision-free control problem for multi-agent systems. For such multi-agent systems, it is the typical situation where conventional methods using either the usual centralized model predictive control (MPC), or even the distributed counterpart, would suffer from substantial difficulty in balancing optimality and computational efficiency. Additionally, the non-convex characteristics that invariably arise in such collision-free control and optimization problems render it difficult to effectively derive a reliable solution (and also to thoroughly analyze the associated convergence properties). To overcome these challenging issues, this work establishes a suitably novel parallel computation framework through an innovative mathematical problem formulation; and then with this framework and formulation, a parallel algorithm based on alternating direction method of multipliers (ADMM) is presented to solve the sub-problems arising from the resulting parallel structure. Furthermore, an efficient and intuitive initialization procedure is developed to accelerate the optimization process, and the optimum is thus determined with significantly improved computational efficiency. As supported by rigorous proofs, the convergence of the proposed ADMM iterations for this nonconvex optimization problem is analyzed and discussed in detail. Finally, a simulation with a group of unmanned aerial vehicles (UAVs) serves as an illustrative example here to demonstrate the effectiveness and efficiency of the proposed approach. Also, the simulation results verify significant improvements in accuracy and computational efficiency compared to other baselines, including primal quadratic mixed integer programming (PQ-MIP), non-convex quadratic mixed integer programming (NC-MIP), and non-convex quadratically constrained quadratic programming (NC-QCQP).


  • Open Access

    Alternating Direction Method of Multipliers-Based Parallel Optimization for Multi-Agent Collision-Free Model Predictive Control

    by Zilong Cheng, Jun Ma, Wenxin Wang, Zicheng Zhu, Clarence W. de Silva, Tong Heng Lee

    This paper investigates the collision-free control problem for multi-agent systems. For such multi-agent systems, it is the typical situation where conventional methods using either the usual centralized model predictive control (MPC), or even the distributed counterpart, would suffer from substantial difficulty in balancing optimality and computational efficiency. Additionally, the non-convex characteristics that invariably arise in such collision-free control and optimization problems render it difficult to effectively derive a reliable solution (and also to thoroughly analyze the associated convergence properties). To overcome these challenging issues, this work establishes a suitably novel parallel computation framework through an innovative mathematical problem formulation; and then with this framework and formulation, a parallel algorithm based on alternating direction method of multipliers (ADMM) is presented to solve the sub-problems arising from the resulting parallel structure. Furthermore, an efficient and intuitive initialization procedure is developed to accelerate the optimization process, and the optimum is thus determined with significantly improved computational efficiency. As supported by rigorous proofs, the convergence of the proposed ADMM iterations for this non-convex optimization problem is analyzed and discussed in detail. Finally, a simulation with a group of unmanned aerial vehicles (UAVs) serves as an illustrative example here to demonstrate the effectiveness and efficiency of the proposed approach. Also, the simulation results verify significant improvements in accuracy and computational efficiency compared to other baselines, including primal quadratic mixed integer programming (PQ-MIP), non-convex quadratic mixed integer programming (NC-MIP), and non-convex quadratically constrained quadratic programming (NC-QCQP).

  • Open Access

    Neural-iLQR: A Learning-Aided Shooting Method for Trajectory Optimization

    by Zilong Cheng, Yulin Li, Kai Chen, Jianghua Duan, Jun Ma, Tong Heng Lee

    Iterative linear quadratic regulator (iLQR) has gained wide popularity in addressing trajectory optimization problems with nonlinear system models. However, as a model-based shooting method, it relies heavily on an accurate system model to update the optimal control actions and the trajectory determined with forward integration, thus becoming vulnerable to inevitable model inaccuracies. Recently, substantial research efforts in learning-based methods for optimal control problems have been progressing significantly in addressing unknown system models, particularly when the system has complex interactions with the environment. Yet an incremental machine learning method or a deep neural network is normally required to fit a substantial scale of sampling motion data. Existing works mainly focus on capturing the whole picture of the motion pattern from trial data (which is essentially noisy and hard to identify with any simple predefined structures) for complex robot systems. Instead, we present Neural-iLQR, a learning-aided shooting method over the unconstrained control space, in which a neural network with a simple structure is used to drive the optimization process towards optimal direction. Through comprehensive evaluations on two illustrative control tasks using three different kinds of lightweight network structures, the proposed method is shown to outperform the conventional iLQR significantly with fast and continuous cost convergence in the presence of inaccuracies in system models, which demonstrates the generalizability and robustness of the proposed learning-aided method.


  • Open Access

    Data-Driven Predictive Control Towards Multi-Agent Motion Planning With Non-Parametric Closed-Loop Behavior Learning

    by Jun Ma, Zilong Cheng, Wenxin Wang, Abdullah Al Mamun, Clarence W. de Silva, Tong Heng Lee

    In many specific scenarios, accurate and effective system identification is a commonly encountered challenge in the model predictive control (MPC) formulation. As a consequence, the overall system performance could be significantly weakened in outcome when the traditional MPC algorithm is adopted under those circumstances when such accuracy is lacking. This paper investigates a non-parametric closed-loop behavior learning method for multi-agent motion planning, which underpins a data-driven predictive control framework. Utilizing an innovative methodology with closed-loop input/output measurements of the unknown system, the behavior of the system is learned based on the collected dataset, and thus the constructed non-parametric predictive model can be used to determine the optimal control actions. This non-parametric predictive control framework alleviates the heavy computational burden commonly encountered in the optimization procedures typically in alternate methodologies requiring open-loop input/output measurement data collection and parametric system identification. The proposed data-driven approach is also shown to preserve good robustness properties. Finally, a multi-UAV system is used to demonstrate the highly effective outcome of this promising development.

  • Open Access

    Data-Driven Linear Quadratic Optimization for Controller Synthesis with Structural Constraints

    by Jun Ma, Zilong Cheng, Xiaocong Li, Wenxin Wang, Masayoshi Tomizuka, Tong Heng Lee

    For various typical cases and situations where the formulation results in an optimal control problem, the Linear Quadratic Regulator (LQR) approach and its variants continue to be highly attractive. In certain scenarios, it can happen that some prescribed structural constraints on the gain matrix would arise. Consequently then, the Algebraic Riccati Equation (ARE) is no longer applicable in a straightforward way to obtain the optimal solution. This work presents a rather effective alternative optimization approach based on gradient projection. The utilized gradient is obtained through a data-driven methodology, and then projected onto applicable constrained hyperplanes. Essentially, this projection gradient determines a direction of progression and computation for the gain matrix update with a decreasing functional cost; and then the gain matrix is further refined in an iterative framework. With this formulation, a data-driven optimization algorithm is summarized for controller synthesis with structural constraints. This data-driven approach has the key advantage that it avoids the necessity of precise modeling which is always required in the classical model-based counterpart; and thus the approach can additionally accommodate various model uncertainties. Illustrative examples are also provided in the work to validate the theoretical results.

  • Data-Driven Linear Quadratic Optimization for Controller Synthesis With Structural Constraints

    by Jun Ma, Zilong Cheng, Xiaocong Li, Wenxin Wang, Masayoshi Tomizuka, Tong Heng Lee

    For various typical cases and situations where the formulation results in an optimal control problem, the linear quadratic regulator (LQR) approach and its variants continue to be highly attractive. In certain scenarios, it can happen that some prescribed structural constraints on the gain matrix would arise. Consequently then, the algebraic Riccati equation (ARE) is no longer applicable in a straightforward way to obtain the optimal solution. This work presents a rather effective alternative optimization approach based on gradient projection. The utilized gradient is obtained through a data-driven methodology, and then projected onto applicable constrained hyperplanes. Essentially, this projection gradient determines a direction of progression and computation for the gain matrix update with a decreasing functional cost; and then the gain matrix is further refined in an iterative framework. With this formulation, a data-driven optimization algorithm is summarized for controller synthesis with structural constraints. This data-driven approach has the key advantage that it avoids the necessity of precise modeling which is always required in the classical model-based counterpart; and thus the approach can additionally accommodate various model uncertainties. Illustrative examples are also provided in the work to validate the theoretical results.


  • Open Access

    Neural-iLQR: A Learning-Aided Shooting Method for Trajectory Optimization

    by Zilong Cheng, Yulin Li, Kai Chen, Jun Ma, Tong Heng Lee

    Iterative linear quadratic regulator (iLQR) has gained wide popularity in addressing trajectory optimization problems with nonlinear system models. However, as a model-based shooting method, it relies heavily on an accurate system model to update the optimal control actions and the trajectory determined with forward integration, thus becoming vulnerable to inevitable model inaccuracies. Recently, substantial research efforts in learning-based methods for optimal control problems have been progressing significantly in addressing unknown system models, particularly when the system has complex interactions with the environment. Yet a deep neural network is normally required to fit substantial scale of sampling data. In this work, we present Neural-iLQR, a learning-aided shooting method over the unconstrained control space, in which a neural network with a simple structure is used to represent the local system model. In this framework, the trajectory optimization task is achieved with simultaneous refinement of the optimal policy and the neural network iteratively, without relying on the prior knowledge of the system model. Through comprehensive evaluations on two illustrative control tasks, the proposed method is shown to outperform the conventional iLQR significantly in the presence of inaccuracies in system models.

  • Top Cited Papers

    Alternating Direction Method of Multipliers for Constrained Iterative LQR in Autonomous Driving

    by Jun Ma, Zilong Cheng, Xiaoxue Zhang, Masayoshi Tomizuka, Tong Heng Lee

    In the context of autonomous driving, the iterative linear quadratic regulator (iLQR) is known to be an efficient approach to deal with the nonlinear vehicle model in motion planning problems. Particularly, the constrained iLQR algorithm has shown noteworthy advantageous outcomes of computation efficiency in achieving motion planning tasks under general constraints of different types. However, the constrained iLQR methodology requires a feasible trajectory at the first iteration as a prerequisite when the logarithmic barrier function is used. Also, the methodology leaves open the possibility for incorporation of fast, efficient, and effective optimization methods (i.e., fast-solvers) to further speed up the optimization process such that the requirements of real-time implementation can be successfully fulfilled. In this paper, a well-defined and commonly-encountered motion planning problem is formulated under nonlinear vehicle dynamics and various constraints, and the alternating direction method of multipliers (ADMM) is utilized to determine the optimal control actions leveraging the iLQR. With this development, the approach is able to circumvent the feasibility requirement of the trajectory at the first iteration. An illustrative example of motion planning for autonomous vehicles is then investigated with different driving scenarios taken into consideration, and a noteworthy achievement of high computation efficiency is attained with the proposed development. Comparing with the constrained iLQR algorithm based on the logarithmic barrier function, our proposed method reduces the average computation time by $31.93\%$ , $38.52\%$ , and $44.57\%$ in the three scenarios; compared with the optimization solver IPOPT, our proposed method reduces the average computation time by $46.02\%$ , $53.26\%$ , and $88.43\%$ in the three scenarios. As a result, real-time computation and implementation can be realized through our proposed framework, and thus it provides additional safety to the on-road driving tasks.


  • On Symmetric Gauss–Seidel ADMM Algorithm for H∞ Guaranteed Cost Control With Convex Parameterization

    by Jun Ma, Zilong Cheng, Xiaoxue Zhang, Masayoshi Tomizuka, Tong Heng Lee

    This article involves the innovative development of a symmetric Gauss–Seidel ADMM algorithm to solve the $\mathcal{H}_{\infty}$ guaranteed cost control problem. In the presence of parametric uncertainties, the $\mathcal{H}_{\infty}$ guaranteed cost control problem generally leads to the large-scale optimization. This is due to the exponential growth of the number of the extreme systems involved with respect to the number of parametric uncertainties. In this work, through a variant of the Youla–Kucera parameterization, the stabilizing controllers are parameterized in a convex set; yielding the outcome that the $\mathcal{H}_{\infty}$ guaranteed cost control problem is converted to a convex optimization problem. Based on an appropriate reformulation using the Schur complement, it then renders possible the use of the ADMM algorithm with symmetric Gauss–Seidel backward and forward sweeps. Significantly, this approach alleviates the often-times prohibitively heavy computational burden typical in many $\mathcal H_{\infty}$ optimization problems while exhibiting good convergence guarantees, which is particularly essential for the related large-scale optimization procedures involved. With this approach, the desired robust stability is ensured, and the disturbance attenuation is maintained at the minimum level in the presence of parametric uncertainties. Rather importantly too, with the attained effectiveness, the methodology thus evidently possesses extensive applicability in various important controller synthesis problems, such as decentralized control, sparse control, and output feedback control problems.