Giorgio Crasto
Giorgio Crasto has a total of 14 co-authors. Here are the top co-authors by number of shared publications:
- Francesco Castellani
University of Perugia
4 shared publications A.R. Gravdahl
1 shared publicationAlessandro Sebastiani
FLOW, STandUP for Wind, Department of Engineering Mechanics KTH Stockholm Sweden
1 shared publication- Andrea Lombardi
Renvico srl, Via San Gregorio 34, 20124 Milano, Italy
1 shared publication Andrea Vignaroli
1 shared publication- Antonio Segalini
Department of Earth Sciences, Uppsala University, Uppsala, Sweden
1 shared publication
Latest Publications
- Open Access
- 24 November 2020
- Published by Wiley in Wind Energy
- Vol. 24 (6) , 634-648
Data analysis and simulation of the Lillgrund wind farm
The power production of the Lillgrund wind farm has been investigated by means of SCADA data covering almost 10 years of operation, wake models and numerical simulation tools, such as WindSim, OpenFOAM and ORFEUS. The analysis of the SCADA data provided the quantification of wake losses and of blockage effects, results that enable a benchmark to assess the uncertainty of other numerical methods of industrial use. The results have been analysed in terms of global array efficiency for different wind directions, wind velocity and stratification conditions. A comparison of the present results with the Jensen and Ainsle models indicated that the two used wake models are affected by an error of about 8–10% in the estimation of the array efficiency, while the error does not vary significantly when using numerical tools such as ORFEUS, WindSim and OpenFOAM. By comparing wind statistics available before the park construction, an assessment of the blockage of the Lillgrund farm was performed with contrasting results from the other numerical tools, highlighting how challenging is to assess farm blockage with current industrial settings.
- 24 November 2020
- Published by Wiley in Wind Energy
- Vol. 24 (6) , 634-648
Open AccessData analysis and simulation of the Lillgrund wind farm
The power production of the Lillgrund wind farm has been investigated by means of SCADA data covering almost 10 years of operation, wake models and numerical simulation tools, such as WindSim, OpenFOAM and ORFEUS. The analysis of the SCADA data provided the quantification of wake losses and of blockage effects, results that enable a benchmark to assess the uncertainty of other numerical methods of industrial use. The results have been analysed in terms of global array efficiency for different wind directions, wind velocity and stratification conditions. A comparison of the present results with the Jensen and Ainsle models indicated that the two used wake models are affected by an error of about 8–10% in the estimation of the array efficiency, while the error does not vary significantly when using numerical tools such as ORFEUS, WindSim and OpenFOAM. By comparing wind statistics available before the park construction, an assessment of the blockage of the Lillgrund farm was performed with contrasting results from the other numerical tools, highlighting how challenging is to assess farm blockage with current industrial settings.
- Open Access
- 10 October 2018
- Published by IOP Publishing in Journal of Physics: Conference Series
- Vol. 1102 (1) , 012007
Accuracy quantification of a CFD model in complex site by cross-checking wind measurements
In the present study it is discussed a sensitivity analysis on input parameters of a CFD resource assessment methodology built on top of OpenFOAM 4.1, a well-known open source library for numerical fluid dynamics. RANS are solved for dry uncompressible air, the Atmospheric Boundary Layer is calculated without thermal effects (neutral conditions). It is highlighted how the control of a metric based upon a weighted root mean square error (wRMSE) of the local accelerations (speed ups) can guide the wind analyst in the design of the computational mesh and further numerical settings. Moreover, it will be quantified the wRMSE as a function of the distance to the measurement points. The parameters analysed are the horizontal extension of the model, the horizontal resolution within the refined area, which is covering the layout of the wind farm, three different versions of k-ε turbulence closure and the number of directional sectors considered.
- 10 October 2018
- Published by IOP Publishing in Journal of Physics: Conference Series
- Vol. 1102 (1) , 012007
Open AccessAccuracy quantification of a CFD model in complex site by cross-checking wind measurements
In the present study it is discussed a sensitivity analysis on input parameters of a CFD resource assessment methodology built on top of OpenFOAM 4.1, a well-known open source library for numerical fluid dynamics. RANS are solved for dry uncompressible air, the Atmospheric Boundary Layer is calculated without thermal effects (neutral conditions). It is highlighted how the control of a metric based upon a weighted root mean square error (wRMSE) of the local accelerations (speed ups) can guide the wind analyst in the design of the computational mesh and further numerical settings. Moreover, it will be quantified the wRMSE as a function of the distance to the measurement points. The parameters analysed are the horizontal extension of the model, the horizontal resolution within the refined area, which is covering the layout of the wind farm, three different versions of k-ε turbulence closure and the number of directional sectors considered.
- Open Access
- 1 January 2014
- Published by Elsevier in Energy Procedia
- Vol. 53, 342-351
Numerical CFD Comparison of Lillgrund Employing RANS
- 1 January 2014
- Published by Elsevier in Energy Procedia
- Vol. 53, 342-351
Open AccessNumerical CFD Comparison of Lillgrund Employing RANS
- 1 June 2013
- Published by SAGE Publications in Wind Engineering
- Vol. 37 (3) , 269-280
Wakes Calculation in a Offshore Wind Farm
This paper is focusing on the wake modeling in large offshore wind farms. Over the sea the ambient turbulence is much lower than onshore, wakes persist for long distances, mixing in a complex pattern. Hence an accurate evaluation of the wakes become crucial in the estimation both of the production and loads. Regarding loads the main effect of the turbines wakes is an increase of turbulence compared to the ambient one. A careful assessment of the wakes is therefore required when analyzing offshore wind farms. The approaches in estimating the wake losses go from simple theoretical or empirical laws to full rotor aerodynamic calculations; in between there is a range of intermediate calculations. Two approaches will be presented: the use of relative simple equations (also called analytical models) which are the standards in the wind resource assessment and a more accurate, but computationally more demanding, the actuator disc technique.
- 1 June 2013
- Published by SAGE Publications in Wind Engineering
- Vol. 37 (3) , 269-280
Wakes Calculation in a Offshore Wind Farm
This paper is focusing on the wake modeling in large offshore wind farms. Over the sea the ambient turbulence is much lower than onshore, wakes persist for long distances, mixing in a complex pattern. Hence an accurate evaluation of the wakes become crucial in the estimation both of the production and loads. Regarding loads the main effect of the turbines wakes is an increase of turbulence compared to the ambient one. A careful assessment of the wakes is therefore required when analyzing offshore wind farms. The approaches in estimating the wake losses go from simple theoretical or empirical laws to full rotor aerodynamic calculations; in between there is a range of intermediate calculations. Two approaches will be presented: the use of relative simple equations (also called analytical models) which are the standards in the wind resource assessment and a more accurate, but computationally more demanding, the actuator disc technique.
- Open Access
- 1 January 2013
- Published by Elsevier in Energy Procedia
- Vol. 35, 274-284
A Practical Approach in the CFD Simulation of Off-shore Wind Farms through the Actuator Disc Technique
- 1 January 2013
- Published by Elsevier in Energy Procedia
- Vol. 35, 274-284
Open AccessA Practical Approach in the CFD Simulation of Off-shore Wind Farms through the Actuator Disc Technique
- Open Access
- 1 January 2012
- Published by Elsevier in Energy Procedia
- Vol. 24, 385-392
Wake Modeling with the Actuator Disc Concept
- 1 January 2012
- Published by Elsevier in Energy Procedia
- Vol. 24, 385-392
Open AccessWake Modeling with the Actuator Disc Concept