Ke Jiang
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Ke Jiang has a total of 27 co-authors. Here are the top co-authors by number of shared publications:
- Lei Liang
National Engineering Research Center of Fiber Optic Sensing Technology and Networks, Wuhan University of Technology, Wuhan, China
9 shared publications Hui Wang
4 shared publications- Shu Dai
Wuhan University of Technology
4 shared publications - Hui Wang
Sanya Science and Education Innovation Park of Wuhan University of Technology, Sanya, China
3 shared publications Lei Liang
3 shared publicationsXiaoling Tong
3 shared publications
Latest Publications
- 2 June 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Sensors Journal
- Vol. PP (1530437X) , 1
Research on Gas Pipeline Leak Detection Method Based on DAS and Attention-Enhanced YOLO
To address the technical challenges in urban buried gas pipeline leak detection, such as weak signal acquisition, insufficient identification accuracy, and significant positioning errors, this study proposes an intelligent detection method integrating helical sensing optical cable-based distributed acoustic sensing (DAS) technology with an improved YOLOv5 model. A helical sensing optical cable with precise pitch is adopted as the sensing unit, significantly enhancing the signal acquisition capability of the DAS system. At the algorithmic level, global feature modeling is achieved by introducing a Transformer module into the eighth layer of the backbone network, while channel-spatial attention mechanisms are incorporated in the ninth layer to optimize local feature extraction. Additionally, a data augmentation strategy combining positional translation and rotation is employed to substantially improve the model’s representation of leak signals. Experimental results demonstrate that under operational pressures ranging from 0.1 to 0.6 MPa, the proposed method achieves a mAP@0.5 of 96.7%, with precision and recall rates reaching 94.8% and 91.3%, respectively, while maintaining positioning errors below 0.07 meters. The findings validate the effectiveness of the synergistic architecture combining helical sensing optical cables with deep learning for pipeline leak detection, offering an innovative technical solution to overcome the limitations of traditional methods in sensitivity and positioning accuracy.
- 2 June 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Sensors Journal
- Vol. PP (1530437X) , 1
Research on Gas Pipeline Leak Detection Method Based on DAS and Attention-Enhanced YOLO
To address the technical challenges in urban buried gas pipeline leak detection, such as weak signal acquisition, insufficient identification accuracy, and significant positioning errors, this study proposes an intelligent detection method integrating helical sensing optical cable-based distributed acoustic sensing (DAS) technology with an improved YOLOv5 model. A helical sensing optical cable with precise pitch is adopted as the sensing unit, significantly enhancing the signal acquisition capability of the DAS system. At the algorithmic level, global feature modeling is achieved by introducing a Transformer module into the eighth layer of the backbone network, while channel-spatial attention mechanisms are incorporated in the ninth layer to optimize local feature extraction. Additionally, a data augmentation strategy combining positional translation and rotation is employed to substantially improve the model’s representation of leak signals. Experimental results demonstrate that under operational pressures ranging from 0.1 to 0.6 MPa, the proposed method achieves a mAP@0.5 of 96.7%, with precision and recall rates reaching 94.8% and 91.3%, respectively, while maintaining positioning errors below 0.07 meters. The findings validate the effectiveness of the synergistic architecture combining helical sensing optical cables with deep learning for pipeline leak detection, offering an innovative technical solution to overcome the limitations of traditional methods in sensitivity and positioning accuracy.
- Open Access
Inversion of ϕ-OTDR Spatial Windowing Effects Using Wiener Deconvolution for Improved Acoustic Wavefield Reconstruction
The spatial response of rectangular pulse heterodyne phase-sensitive optical time-domain reflectometry (-OTDR) to an acoustic event is characterized by a windowing function rather than a point-like sensitivity. This effect degrades the system’s spatial resolution and introduces systematic errors in array signal processing. This work presents modeling analysis and a mitigation strategy for this fundamental limitation. The spatial windowing effect is modeled as a point spread function (PSF) derived from physical mechanisms and system parameters, including the pulse width, gauge length, and intra-pulse intensity dynamics. The PSF model is validated against measurements under near-ideal conditions using a fiber-coupled tuning fork. A Wiener filter-based deconvolution method is utilized to invert the windowed spatial response towards a point-like response. The effectiveness of this inversion is demonstrated through enhanced spatial resolution and accurate reconstruction of two-dimensional wavefront geometry. Furthermore, the impact of this effect on array signal processing is quantitatively evaluated. The results demonstrate that the proposed method effectively suppresses systematic errors in wavefield analysis, and specifically enhances the accuracy and confidence of steered response power—phase transform (SRP-PHAT) spatial spectrum estimation. This study provides a systematic framework for understanding, quantifying, and inverting the spatial response in -OTDR, enabling accurate and interpretable acoustic field sensing.Open AccessInversion of ϕ-OTDR Spatial Windowing Effects Using Wiener Deconvolution for Improved Acoustic Wavefield Reconstruction
The spatial response of rectangular pulse heterodyne phase-sensitive optical time-domain reflectometry (-OTDR) to an acoustic event is characterized by a windowing function rather than a point-like sensitivity. This effect degrades the system’s spatial resolution and introduces systematic errors in array signal processing. This work presents modeling analysis and a mitigation strategy for this fundamental limitation. The spatial windowing effect is modeled as a point spread function (PSF) derived from physical mechanisms and system parameters, including the pulse width, gauge length, and intra-pulse intensity dynamics. The PSF model is validated against measurements under near-ideal conditions using a fiber-coupled tuning fork. A Wiener filter-based deconvolution method is utilized to invert the windowed spatial response towards a point-like response. The effectiveness of this inversion is demonstrated through enhanced spatial resolution and accurate reconstruction of two-dimensional wavefront geometry. Furthermore, the impact of this effect on array signal processing is quantitatively evaluated. The results demonstrate that the proposed method effectively suppresses systematic errors in wavefield analysis, and specifically enhances the accuracy and confidence of steered response power—phase transform (SRP-PHAT) spatial spectrum estimation. This study provides a systematic framework for understanding, quantifying, and inverting the spatial response in -OTDR, enabling accurate and interpretable acoustic field sensing. - 1 September 2025
- Published by Elsevier in Measurement
- Vol. 257
Dynamic modeling and measurement validation of soil-cable interaction effects on DAS performance
- 1 September 2025
- Published by Elsevier in Measurement
- Vol. 257
Dynamic modeling and measurement validation of soil-cable interaction effects on DAS performance
- Open Access
Validation of Taylor’s Frozen Hypothesis for DAS-Based Flow
Accurate measurement of pipeline flow is of great significance for industrial and environmental monitoring. Traditional intrusive methods have the disadvantages of high cost and damage to pipeline structure, while non-intrusive techniques can circumvent such issues. Although Taylor’s frozen hypothesis has a theoretical advantage in non-intrusive velocity detection, current research focuses on planar flow fields, and its applicability in turbulent circular pipes remains controversial. Moreover, there is no precedent for combining it with distributed acoustic sensing (DAS) technology. This paper constructs a circular pipe turbulence model through large eddy simulation (LES), revealing the spatiotemporal distribution characteristics of turbulent kinetic energy and the energy propagation rules of FK spectra. It proposes a dispersion feature enhancement algorithm based on cross-correlation, which combines a rotatable elliptical template with normalized cross-correlation coefficients to suppress interference from non-target directions. An experimental circulating pipeline DAS measurement system was set up to complete signal denoising and compare two principles of flow velocity verification. The results show that the vortex structure of turbulent flow in circular pipes remains stable in the convection direction, conforming to theoretical premises; the relative error of average flow velocity by this method is ≤3%, with significant improvements in accuracy and stability in high-flow zones. This study provides innovative methods and experimental basis for non-intrusive flow detection using DAS.
Open AccessValidation of Taylor’s Frozen Hypothesis for DAS-Based Flow
Accurate measurement of pipeline flow is of great significance for industrial and environmental monitoring. Traditional intrusive methods have the disadvantages of high cost and damage to pipeline structure, while non-intrusive techniques can circumvent such issues. Although Taylor’s frozen hypothesis has a theoretical advantage in non-intrusive velocity detection, current research focuses on planar flow fields, and its applicability in turbulent circular pipes remains controversial. Moreover, there is no precedent for combining it with distributed acoustic sensing (DAS) technology. This paper constructs a circular pipe turbulence model through large eddy simulation (LES), revealing the spatiotemporal distribution characteristics of turbulent kinetic energy and the energy propagation rules of FK spectra. It proposes a dispersion feature enhancement algorithm based on cross-correlation, which combines a rotatable elliptical template with normalized cross-correlation coefficients to suppress interference from non-target directions. An experimental circulating pipeline DAS measurement system was set up to complete signal denoising and compare two principles of flow velocity verification. The results show that the vortex structure of turbulent flow in circular pipes remains stable in the convection direction, conforming to theoretical premises; the relative error of average flow velocity by this method is ≤3%, with significant improvements in accuracy and stability in high-flow zones. This study provides innovative methods and experimental basis for non-intrusive flow detection using DAS.
- Open Access
- 20 January 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Access
- Vol. 13, 22637-22646
Low Complexity Unquantized Forward Stack Decoding Algorithm for Spinal Codes in Measurement While Drilling Communication
The complex environments of Measurement-While-Drilling (MWD), characterized by intense vibrations and high temperatures, can lead to random attenuation of optical intensity, phase mismatch, and signal distortion, thereby reducing the signal-to-noise ratio (SNR) of optical signals. Under severe channel fluctuations, forward stack decoding (FSD) tends to search more invalid nodes, increasing decoding complexity. This paper proposes an unquantized forward stack decoding algorithm that dynamically adjusts the number of retained candidate nodes based on channel conditions. With the ability to evaluate channel status dynamically, the proposed method achieves low-complexity decoding and enhances transmission performance. In simulations under channel conditions with SNR ranging from -14 to 5 dB, the average decoding complexity was reduced by 58% compared to conventional FSD. In communication experiments using a dynamically variable optical attenuator to generate random attenuation between 0 and -30 dB, the average decoding complexity was reduced by 23.6% compared to FSD. Furthermore, this work integrates the non-quantized forward stack decoding with the superposition UEP-Spinal code to construct a novel MWD communication system. In simulated MWD environment, the proposed system achieved an average bit error rate (BER) of 5.58×10-5, with BER consistently below 0.1% across all intervals. Compared to the traditional Spinal code system, the decoding complexity was reduced by 31.5%. The results demonstrate that the newly developed communication system exhibits high reliability, low decoding latency, and high effective transmission rates in simulated drilling platform scenarios, making it well-suited for MWD communication applications.
- 20 January 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Access
- Vol. 13, 22637-22646
Open AccessLow Complexity Unquantized Forward Stack Decoding Algorithm for Spinal Codes in Measurement While Drilling Communication
The complex environments of Measurement-While-Drilling (MWD), characterized by intense vibrations and high temperatures, can lead to random attenuation of optical intensity, phase mismatch, and signal distortion, thereby reducing the signal-to-noise ratio (SNR) of optical signals. Under severe channel fluctuations, forward stack decoding (FSD) tends to search more invalid nodes, increasing decoding complexity. This paper proposes an unquantized forward stack decoding algorithm that dynamically adjusts the number of retained candidate nodes based on channel conditions. With the ability to evaluate channel status dynamically, the proposed method achieves low-complexity decoding and enhances transmission performance. In simulations under channel conditions with SNR ranging from -14 to 5 dB, the average decoding complexity was reduced by 58% compared to conventional FSD. In communication experiments using a dynamically variable optical attenuator to generate random attenuation between 0 and -30 dB, the average decoding complexity was reduced by 23.6% compared to FSD. Furthermore, this work integrates the non-quantized forward stack decoding with the superposition UEP-Spinal code to construct a novel MWD communication system. In simulated MWD environment, the proposed system achieved an average bit error rate (BER) of 5.58×10-5, with BER consistently below 0.1% across all intervals. Compared to the traditional Spinal code system, the decoding complexity was reduced by 31.5%. The results demonstrate that the newly developed communication system exhibits high reliability, low decoding latency, and high effective transmission rates in simulated drilling platform scenarios, making it well-suited for MWD communication applications.
- 17 December 2024
- Published by Elsevier in Measurement
- Vol. 244
Numerical simulation and experimental study on non-invasive pipeline flow measurement based on distributed acoustic sensing
- 17 December 2024
- Published by Elsevier in Measurement
- Vol. 244
Numerical simulation and experimental study on non-invasive pipeline flow measurement based on distributed acoustic sensing
- 27 November 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Sensors Journal
- Vol. 25 (2) , 2722-2736
Optimized Design of a Multiaxis Vibration Sensor With Flexible Hinge Using PESA-II
A unique multi-axis vibration sensor system based on a flexible Fiber Bragg Grating (FBG) hinge is presented in this paper. Derivation of sensitivity formulae for longitudinal and transverse vibration offers insights into the sensor’s behavior in response to stimuli that are directed in multiple directions. The sensor design is improved via a multi-objective optimization technique, which minimizes interference and increases sensitivity. By tackling cross-talk and interference, a Random Forest-based recognition model substantially increases the accuracy of vibration signal identification. High sensitivities are seen in the 100–1000 Hz frequency range: 8.847 pm/g, 11.71 pm/g, and 7.687 pm/g. Impressive lateral anti-interference identification rates of 99.58% and 98.75% are attained by our Random Forest model, proving its resilience in a variety of monitoring circumstances. These results highlight the improved dependability and performance of FBG hinge-type accelerometers.
- 27 November 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Sensors Journal
- Vol. 25 (2) , 2722-2736
Optimized Design of a Multiaxis Vibration Sensor With Flexible Hinge Using PESA-II
A unique multi-axis vibration sensor system based on a flexible Fiber Bragg Grating (FBG) hinge is presented in this paper. Derivation of sensitivity formulae for longitudinal and transverse vibration offers insights into the sensor’s behavior in response to stimuli that are directed in multiple directions. The sensor design is improved via a multi-objective optimization technique, which minimizes interference and increases sensitivity. By tackling cross-talk and interference, a Random Forest-based recognition model substantially increases the accuracy of vibration signal identification. High sensitivities are seen in the 100–1000 Hz frequency range: 8.847 pm/g, 11.71 pm/g, and 7.687 pm/g. Impressive lateral anti-interference identification rates of 99.58% and 98.75% are attained by our Random Forest model, proving its resilience in a variety of monitoring circumstances. These results highlight the improved dependability and performance of FBG hinge-type accelerometers.
- Open Access
- 10 October 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Access
- Vol. 12, 155598-155606
Low Complexity Encoding Design for Fiber Optic Measurement While Drilling Communication System Based on Superposition Spinal Codes
Fiber optic communication while drilling can transmit downhole geological and engineering parameter data at high speed, serving as a crucial component of intelligent drilling. However, the complex and highly dynamic downhole environment, characterized by strong vibrations and high temperatures, can lead to random attenuation of light intensity, phase mismatch, and signal distortion, thereby reducing the signal-to-noise ratio of the optical signal. This paper proposes a superposition UEP-Spinal code structure to enhance the noise resistance of signals under low SNR conditions. This structure utilizes Unequal Error Protection and adjusts the duty cycle of the superposition weighting factor P to separately encode the head and tail codes of the signal, simplifying the structural complexity of the tail code and reducing complexity by 2.01dB for the same code length. Meanwhile, it enhances the noise resistance of the head code, reducing the bit error rate by 1.21dB for the same channel capacity, and the overall decoding complexity is reduced by 13.3%. The results demonstrate that the superposition UEP-Spinal code can achieve stable and reliable communication in low SNR environments.
- 10 October 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Access
- Vol. 12, 155598-155606
Open AccessLow Complexity Encoding Design for Fiber Optic Measurement While Drilling Communication System Based on Superposition Spinal Codes
Fiber optic communication while drilling can transmit downhole geological and engineering parameter data at high speed, serving as a crucial component of intelligent drilling. However, the complex and highly dynamic downhole environment, characterized by strong vibrations and high temperatures, can lead to random attenuation of light intensity, phase mismatch, and signal distortion, thereby reducing the signal-to-noise ratio of the optical signal. This paper proposes a superposition UEP-Spinal code structure to enhance the noise resistance of signals under low SNR conditions. This structure utilizes Unequal Error Protection and adjusts the duty cycle of the superposition weighting factor P to separately encode the head and tail codes of the signal, simplifying the structural complexity of the tail code and reducing complexity by 2.01dB for the same code length. Meanwhile, it enhances the noise resistance of the head code, reducing the bit error rate by 1.21dB for the same channel capacity, and the overall decoding complexity is reduced by 13.3%. The results demonstrate that the superposition UEP-Spinal code can achieve stable and reliable communication in low SNR environments.
- Open Access
How the Material Characteristics of Optical Fibers and Soil Influence the Measurement Results of Distributed Acoustic Sensing
Fiber optic distributed acoustic sensing (DAS) technology is widely used in security surveillance and geophysical survey applications. The response of the DAS system to external vibrations varies with different types of fiber optic cable connections. The mechanism of mutual influence between the cable’s characteristics and DAS measurement results remains unclear. This study proposed a dynamic model of the interaction between the optical cable and the soil, analyzed the impact of the dynamic parameters of the optical cable and soil on the sensitivity of the DAS system, and validated the theoretical analysis through experiments. The findings suggest that augmenting the cable’s bending stiffness 5.5-fold and increasing its unit mass 4.2-fold result in a discernible reduction of the system’s response to roughly 0.15 times of its initial magnitude. Cables with lower unit mass and bending stiffness are more sensitive to vibration signals. This research provides a foundation for optimizing vibration-enhanced fiber optic cables and broadening the potential usage scenarios for DAS systems.
Open AccessHow the Material Characteristics of Optical Fibers and Soil Influence the Measurement Results of Distributed Acoustic Sensing
Fiber optic distributed acoustic sensing (DAS) technology is widely used in security surveillance and geophysical survey applications. The response of the DAS system to external vibrations varies with different types of fiber optic cable connections. The mechanism of mutual influence between the cable’s characteristics and DAS measurement results remains unclear. This study proposed a dynamic model of the interaction between the optical cable and the soil, analyzed the impact of the dynamic parameters of the optical cable and soil on the sensitivity of the DAS system, and validated the theoretical analysis through experiments. The findings suggest that augmenting the cable’s bending stiffness 5.5-fold and increasing its unit mass 4.2-fold result in a discernible reduction of the system’s response to roughly 0.15 times of its initial magnitude. Cables with lower unit mass and bending stiffness are more sensitive to vibration signals. This research provides a foundation for optimizing vibration-enhanced fiber optic cables and broadening the potential usage scenarios for DAS systems.
- 7 January 2022
- Published by Optica Publishing Group in Applied Optics
- Vol. 61 (2) , 554-562
High-frequency fiber Bragg gating accelerometer and strain sensor-based blast test on a concrete slab
The blast test is the most direct method of measuring explosive performance and structural safety. Because of long-distance wires and electromagnetic interference, some scattering exists in the blast test using electrical sensors. For this paper, a double-hinge high-frequency fiber Bragg gating (FBG) accelerometer was designed and manufactured to measure the acceleration on a blast-loaded concrete slab. The resonance frequency and sensitiveness of the sensor were determined as 3400 Hz and 6.26 pm/g, respectively. Blasting was performed seven times, with each blast generating the energy equivalent of 50 kg of TNT. The stress waves were obtained from the blast source for distances at 4 m, 6 m, and 8 m. The peak accelerations in test 6 were obtained as 396.21 g, 123.57 g, and 38.88 g, respectively, whereas the propagation velocity of the stress wave was around 2500 m/s. Furthermore, the study was complemented by numerical simulations. The test results were compared with the empirical formula, which validated the reliability and applicability of fiber optical sensors in blast testing. The proposed fiber optical sensors have shown promising results, further boosting their practical applications in blast testing and monitoring structural health following a blast shock.
- 7 January 2022
- Published by Optica Publishing Group in Applied Optics
- Vol. 61 (2) , 554-562
High-frequency fiber Bragg gating accelerometer and strain sensor-based blast test on a concrete slab
The blast test is the most direct method of measuring explosive performance and structural safety. Because of long-distance wires and electromagnetic interference, some scattering exists in the blast test using electrical sensors. For this paper, a double-hinge high-frequency fiber Bragg gating (FBG) accelerometer was designed and manufactured to measure the acceleration on a blast-loaded concrete slab. The resonance frequency and sensitiveness of the sensor were determined as 3400 Hz and 6.26 pm/g, respectively. Blasting was performed seven times, with each blast generating the energy equivalent of 50 kg of TNT. The stress waves were obtained from the blast source for distances at 4 m, 6 m, and 8 m. The peak accelerations in test 6 were obtained as 396.21 g, 123.57 g, and 38.88 g, respectively, whereas the propagation velocity of the stress wave was around 2500 m/s. Furthermore, the study was complemented by numerical simulations. The test results were compared with the empirical formula, which validated the reliability and applicability of fiber optical sensors in blast testing. The proposed fiber optical sensors have shown promising results, further boosting their practical applications in blast testing and monitoring structural health following a blast shock.