JJJason R. Jeffries

Jason R. Jeffries

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Jason R. Jeffries has a total of 55 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Compatibility of molten plutonium with wrought and additively manufactured metal crucibles

    by Michelle M. Greenough, Alexander E. Wilson-Heid, R. Joey Griffiths, Donya R. Servando-Williams, Ryan M. Kissinger, W. Preston Cole, Debra L. Rosas, Andrew J. Swift, Jason E. Schnackenberg, Tien T. Roehling, et al.

    Understanding plutonium’s interaction with metals is crucial for optimizing pyrochemical operations, nuclear fuel containment, and various actinide processing techniques. Traditionally, tantalum crucibles are employed for plutonium processing due to their high durability, excellent temperature stability, and low solubility in plutonium. However, tantalum faces challenges such as plutonium wetting and diffusion, making surface coatings particularly important for crucibles in pyrochemical applications to enhance corrosion resistance against plutonium. Tantalum is also expensive and difficult to machine, prompting the need for advanced manufacturing techniques to address these challenges. Here, we investigate the interaction of Pu with tantalum and titanium crucibles fabricated using both traditional machining methods and laser powder bed fusion (LPBF) additive manufacturing (AM). LPBF-AM is an advanced technique that allows for the creation of complex geometries from traditionally difficult-to-machine metals by using a high-powered laser to build parts. Previous studies of conventional manufactured tantalum have utilized oxidation and carburization of the surface to mitigate plutonium wetting; however, no studies of surface modified LPBF-AM material have been undertaken. These studies are crucial, given the typical differences in the grain structure between conventional and LPBF-AM materials. All crucibles underwent differential scanning calorimetry to confirm the melting of plutonium. Subsequently, the crucibles were sectioned and mounted in epoxy for microstructural analysis using optical microscopy and scanning electron microscopy. This investigation, comparing the performance of wrought vs AM metal crucibles, provides a basis for future tooling applications in actinide processing techniques and can address the challenges associated with traditional machining, particularly in pyrochemical applications.


  • Boundary scattering in topological Kondo insulator SmB6

    by Narayan Poudel, Daniel J. Murray, Jason R. Jeffries, Krzysztof Gofryk

    We have studied the effects of phonon-boundary scattering on the thermal transport of topological Kondo insulator SmB6. The studies have been performed using the 3ω method across a temperature range 3–300 K. Our results indicate that the thermal conductivity of micro-sized SmB6 is of an order of magnitude smaller than that of a bulk single crystal. Using the Callaway model, we analyzed the low-temperature lattice thermal conductivity of the microcrystal and demonstrated that phonon scattering at the sample boundaries is a major contributor to the thermal resistance in this topological material. Furthermore, our study reveals that the temperature dependence of the lattice thermal conductivity exhibits a double-peak structure, suggesting strong phonon–phonon or phonon–defect interactions in this material, characteristic of resonant scattering. These findings will help in a better understanding of thermal transport in advanced materials and devices at the micro scale.


  • Small-scale production of bespoke accelerated aging plutonium alloy

    by K. S. Holliday, A. M. Parkes, D. S. Rappleye, D. J. Roberts, K. J. Kondrat, S. A. Simpson, A. J. Swift, U. Mehta, R. M. Kissinger, D. L. Rosas, et al.

    This study demonstrates the 100 g scale manufacture of a plutonium alloy that ages at an accelerated rate. The resulting alloy ages six times faster than typical weapons-grade plutonium due to the addition of 238Pu. As a major innovation, the process involved using a partial direct oxide reduction technique. This method was achieved by developing a new, complex geometry stirrer using additive manufacturing to reduce the 238Pu oxide and efficiently incorporate it into weapons-grade plutonium metal. The material was then purified by molten salt extraction and electrorefining before being alloyed with gallium. The alloy was then cold-rolled and annealed in a homogenization heat treatment. The resulting disk was characterized by metallography and differential scanning calorimetry, and the impurity content was determined using analytical chemistry techniques. The results show that a homogeneous delta phase plutonium alloy was achieved with expected microstructure and minimal impurities. This study was also successful in changing the plutonium isotopic composition by incorporating additional 238Pu to accelerate the effects of radiation damage. This enables researchers to study long-term aging phenomena in a reduced time frame, thus avoiding the need for large-scale material production and circumventing the limitations of using naturally aged, archived plutonium.


  • Effects cascade debris and helium bubbles on the strength of aged plutonium

    by Wilhelm G. Wolfer, Jason R. Jeffries

    The radioactive decay of aging Pu is dominated by α-decay. This persistent α-decay produces crystalline defects in the form of dislocation loops and helium bubbles that evolve with time. Comparable defects are produced in other metallic alloys when subject to neutron irradiation, and these defects are known to modify the plastic deformation of irradiated materials. Models have been developed for these irradiated materials and validated against experimental confirmations of yield strength and the concomitant microstructural evolution. Herein, we deploy those previously developed models and apply their mechanics to plutonium aging.


  • Influence of helium bubbles on the bulk equation of state of gold under static compression

    by Jason R. Jeffries, Philip C. Myint, Jesse S. Smith, Mark A. Wall, Bruce Baer, Christine J. Wu, Scott Tumey

    Nuclear materials often evolve into two-phase systems comprising a bulk matrix with dispersed inert-gas bubbles. The presence of these bubbles can have consequences to the thermomechanical response of materials and is a key life-limiting factor in some nuclear fuel forms. Understanding the behavior of these two-phase, bubble-matrix systems is, thus, important to improved predictive models and frameworks for many nuclear materials applications. While temperature excursions of these two-phase systems have been characterized, fewer studies have focused on the evolution of inert-gas bubbles under pressure. In this paper, we use x-ray tools to interrogate a He-implanted gold foil to determine the pressure-dependent evolution of the individual components (Au matrix + bubbles), and we compare that total pressure dependence to theoretical equation-of-state descriptions based on mixing rules.

  • Constraints on 5f -electron magnetism in Ga-stabilized δ -Pu from x-ray magnetic circular dichroism

    by Alexander A. Baker, Gilberto Fabbris, Daniel Haskel, Jason R. Jeffries

    Density-functional theory models of δ-Pu accurately predict crystal structure, phonon density of states, and unit cell volumes but require magnetic degrees of freedom which have never been experimentally verified. Some models invoke an on-site cancellation of spin and orbital moments, engendering a near-zero bulk magnetization, undetectable by most probes. Here, we employ x-ray magnetic circular dichroism at the Pu M4,5 edges to directly probe spin and orbital moments using the magneto-optical sum rules. The data show no dichroism within experimental error, constraining polarized moments at 6 T and 3 K to μL,S<0.1μB. These experiments point to the absence of even unconventional spin-orbit compensated order in δ-Pu.


  • 10.1063/5.0076594.1

    by Eric S. Elton, Phillip H. Paul, Victor A. Beck, Jason R. Jeffries, Andrew J. Pascall

    The liquid metal jetting droplet-on-demand technology provides many potential benefits to metal additive manufacturing. However, much is left to understand the operational margins to reliably create stable, satellite-free droplets. We elucidate these margins by experimentally probing the unexplored extremities of a recently proposed printability window based on the jet Weber (Wejet) and Ohnesorge (Z = 1/Oh) numbers. We generated stable droplets for 2 ≲ Wejet ≲ 4 for all tested Z = 339 to 2526—well beyond the bounds of any previously published printability window—suggesting that additional physics may be needed to understand droplet-on-demand in the high Z regime.

  • Open Access

    Experimentally probing the extremes of droplet-on-demand printability via liquid metals

    by Nicholas N. Watkins, Eric S. Elton, Phillip H. Paul, Victor A. Beck, Jason R. Jeffries, Andrew J. Pascall

    The liquid metal jetting droplet-on-demand technology provides many potential benefits to metal additive manufacturing. However, much is left to understand the operational margins to reliably create stable, satellite-free droplets. We elucidate these margins by experimentally probing the unexplored extremities of a recently proposed printability window based on the jet Weber (Wejet) and Ohnesorge (Z = 1/Oh) numbers. We generated stable droplets for 2 ≲ Wejet ≲ 4 for all tested Z = 339 to 2526—well beyond the bounds of any previously published printability window—suggesting that additional physics may be needed to understand droplet-on-demand in the high Z regime.


  • Magnetic anisotropy in uranium monosulfide probed by magnetic torque measurements

    by Narayan Poudel, Jason Jeffries, Krzysztof Gofryk

    We have studied the magnetic torque in uranium monosulfide (US) single crystals to explore the magnetic anisotropy in this material. Uranium monosulfide crystallizes in a cubic, NaCl-type of crystal structure and exhibits the largest magnetocrystalline anisotropy observed in cubic systems. By performing detailed torque measurements we observe a strongly anisotropic behavior in the paramagnetic phase due to crystal defects and quadrupolar pair interactions. Our studies also confirm the presence of a large anisotropy in the ferromagnetic state of the US system with the 〈100〉, 〈111〉, and 〈110〉 directions being the hard, easy, and intermediate axes, respectively. Furthermore, the anisotropy in the paramagnetic phase shows similar characteristics to the anisotropy observed in the ferromagnetic phase, as characterized by second and fourth rank susceptibility terms. The similarity of the anisotropic behaviors in paramagnetic and ferromagnetic phases is the consequence of strong magnetoelastic properties in this system, which possibly lead to the rhombohedral structural distortion, not only in the ferromagnetic phase but also in the paramagnetic phase (induced by applied magnetic field).


  • A combined numerical and experimental study to elucidate primary breakup dynamics in liquid metal droplet-on-demand printing

    by Victor A. Beck, Nicholas N. Watkins, Ava S. Ashby, Aiden A. Martin, Phillip H. Paul, Jason R. Jeffries, Andrew J. Pascall

    Droplet-on-demand liquid metal jetting is emerging as a powerful technology for the additive manufacturing of metallic parts. The success of this method hinges on overcoming several technological challenges. The principal one among these challenges is the controlled repeatable ejection of single uniform droplets. Due to the high density and surface tension of liquid metals, the droplet ejection process occurs near the minimal extremes of the printability phase diagram, defined by acceptable ranges for the Weber (We) and Ohnesorge (Oh) numbers. In this work, we experimentally demonstrate the satellite-free ejection of pneumatically actuated molten tin droplets in this extreme corner of printability and use a combination of high-speed video analysis and volume-of-fluid modeling to elucidate the droplet dynamics. While the simulations at low Oh and We can correctly describe several aspects of the breakup process, such as an increasing tail and pinch-point near the nozzle, no single parameter set can completely capture the droplet shape at breakup. Instead, the experimental droplet dynamics appear to include features from both high and low Oh breakup. This disagreement is ascribed to the incomplete description of the droplet ejection process including wetting and exit effects near the nozzle opening and surface effects such as transient cooling and oxide formation.