Ling Ai
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Ling Ai has a total of 33 co-authors. Here are the top co-authors by number of shared publications:
- Weijie Song
Ningbo Institute of Materials Technology and Engineering Chinese Academy of Sciences Ningbo People's Republic of China
4 shared publications Hong Ji
Ningbo Institute of Materials Technology and Engineering, Chinese Academy of Sciences, Ningbo 315201, China
3 shared publicationsWeijie Song
Ningbo Institute of Materials Technology and Engineering Chinese Academy of Sciences Ningbo 315201 P. R. China
3 shared publicationsXiaomei Chen
School of Materials Science and Chemical Engineering, Ningbo University, Ningbo 315211, China
3 shared publicationsYunhui Kong
School of Materials Science and Chemical Engineering Ningbo University Ningbo 315211 P. R. China
2 shared publicationsChuanfan Ding
School of Materials Science and Chemical Engineering Ningbo University Ningbo 315211 China
1 shared publication
Latest Publications
- Open Access
- 7 April 2026
- Published by Royal Society of Chemistry (RSC) in RSC Advances
- Vol. 16 (20) , 18270-18281
Photothermal-responsive self-healing PDMS-based elastomers for stretchable strain sensors
The modification of traditional self-healing elastomers is typically accompanied by a loss of both strength and self-healing efficiency, limiting their long-term reliability. Developing multifunctional polydimethylsiloxane (PDMS)-based systems capable of overcoming this trade-off is thus critical for practical sensor applications. In this work, a photothermal-responsive self-healing PDMS elastomer (PUSE) was designed by constructing an elastomeric network from PDMS and isophorone diisocyanate (IPDI), with 4, 4′-dithiobisdiphenylamine (APDS) and epoxy-functionalized 2, 4, 6, 8 -tetramethyl – 2, 4, 6, 8 – tetra [3 – (hydroxyphenylmethoxy) propyl] cyclotetrasiloxane (TEC) as chain extenders. The synergistic effect of dynamic disulfide bonds and hydrogen bonds endowed the elastomer with reversible self-healing ability, while rigid phenyl and siloxane rings enhanced mechanical robustness. The optimized PUS3E elastomer exhibited a tensile strength of 4.2 MPa, a toughness of 9.85 MJ m−3, and a resilience of 364.70%, Moreover, the self-healing efficiency reached 94.76% under UV irradiation within 24 h, surpassing 74.90% achieved at 70 °C, demonstrating the effectiveness of photo-thermal-assisted healing. The elastomer also showed hydrophobicity (water contact angle >100°) and optical transparency (T550nm = 87.5%). PUS3E was also utilized as the substrate for preparing resistive strain sensors that can accurately detect signals from the natural movements of the human body, making them highly valuable in the field of flexible sensors.
- 7 April 2026
- Published by Royal Society of Chemistry (RSC) in RSC Advances
- Vol. 16 (20) , 18270-18281
Open AccessPhotothermal-responsive self-healing PDMS-based elastomers for stretchable strain sensors
The modification of traditional self-healing elastomers is typically accompanied by a loss of both strength and self-healing efficiency, limiting their long-term reliability. Developing multifunctional polydimethylsiloxane (PDMS)-based systems capable of overcoming this trade-off is thus critical for practical sensor applications. In this work, a photothermal-responsive self-healing PDMS elastomer (PUSE) was designed by constructing an elastomeric network from PDMS and isophorone diisocyanate (IPDI), with 4, 4′-dithiobisdiphenylamine (APDS) and epoxy-functionalized 2, 4, 6, 8 -tetramethyl – 2, 4, 6, 8 – tetra [3 – (hydroxyphenylmethoxy) propyl] cyclotetrasiloxane (TEC) as chain extenders. The synergistic effect of dynamic disulfide bonds and hydrogen bonds endowed the elastomer with reversible self-healing ability, while rigid phenyl and siloxane rings enhanced mechanical robustness. The optimized PUS3E elastomer exhibited a tensile strength of 4.2 MPa, a toughness of 9.85 MJ m−3, and a resilience of 364.70%, Moreover, the self-healing efficiency reached 94.76% under UV irradiation within 24 h, surpassing 74.90% achieved at 70 °C, demonstrating the effectiveness of photo-thermal-assisted healing. The elastomer also showed hydrophobicity (water contact angle >100°) and optical transparency (T550nm = 87.5%). PUS3E was also utilized as the substrate for preparing resistive strain sensors that can accurately detect signals from the natural movements of the human body, making them highly valuable in the field of flexible sensors.
- Open Access
Enhancing E-Nose Performance via Metal-Oxide Based MEMS Sensor Arrays Optimization and Feature Alignment for Drug Classification
This article introduces a novel approach to improve electronic nose classification accuracy by optimizing sensor arrays and aligning features. This involves selecting the best sensor combinations and reducing redundant information for better odor recognition. We employ a feature alignment algorithm to address the discrepancies that impede model sharing between electronic nose devices. Our research focuses on overcoming challenges associated with material selection and the constraints of transferring classification models across different electronic nose devices for drug classification. We fabricated six SnO2-based MEMS gas sensors using physical vapor deposition. The ReliefF algorithm was employed to rank and score each sensor’s contribution to drug classification, identifying the optimal sensor array. We then applied feature alignment from transfer learning to enhance model sharing among three inconsistent devices. This study resolves the issue of electronic noses being hard to use on the same database due to hardware inconsistencies in batch production, laying the groundwork for future mass production.
Open AccessEnhancing E-Nose Performance via Metal-Oxide Based MEMS Sensor Arrays Optimization and Feature Alignment for Drug Classification
This article introduces a novel approach to improve electronic nose classification accuracy by optimizing sensor arrays and aligning features. This involves selecting the best sensor combinations and reducing redundant information for better odor recognition. We employ a feature alignment algorithm to address the discrepancies that impede model sharing between electronic nose devices. Our research focuses on overcoming challenges associated with material selection and the constraints of transferring classification models across different electronic nose devices for drug classification. We fabricated six SnO2-based MEMS gas sensors using physical vapor deposition. The ReliefF algorithm was employed to rank and score each sensor’s contribution to drug classification, identifying the optimal sensor array. We then applied feature alignment from transfer learning to enhance model sharing among three inconsistent devices. This study resolves the issue of electronic noses being hard to use on the same database due to hardware inconsistencies in batch production, laying the groundwork for future mass production.
- 23 April 2024
- Published by American Chemical Society (ACS) in ACS Applied Materials & Interfaces
- Vol. 16 (18) , 23668-23676
Silane Doping for Efficient Flexible Perovskite Solar Cells with Improved Defect Passivation and Device Stability
In this work, doping 3-amino-propyl triethoxysilane (APTES) into a perovskite precursor is proven to be an effective strategy, which can passivate crystal defects, control the crystallization rate, and improve the morphology. APTES can form oligomers through hydrolysis and a condensation reaction, thus blocking the invasion of external water molecules. In addition, the lone pair electrons on the N atom in the amino group of APTES form a coordination bond with perovskite by sharing the empty 6p orbital on Pb2+, which can effectively passivate the defects of the film and realize a highly uniform and dense perovskite film with preferential crystal growth orientation. The film exhibits high (110) crystal plane orientation and long carrier lifetime and mobility, which improves the performance of flexible perovskite solar cells. Using this approach, the champion device presents an optimal power conversion efficiency of 19.84% with much promoted air stability. Moreover, the efficiency of flexible devices does not decrease after maximum power point irradiation for 360 s.
- 23 April 2024
- Published by American Chemical Society (ACS) in ACS Applied Materials & Interfaces
- Vol. 16 (18) , 23668-23676
Silane Doping for Efficient Flexible Perovskite Solar Cells with Improved Defect Passivation and Device Stability
In this work, doping 3-amino-propyl triethoxysilane (APTES) into a perovskite precursor is proven to be an effective strategy, which can passivate crystal defects, control the crystallization rate, and improve the morphology. APTES can form oligomers through hydrolysis and a condensation reaction, thus blocking the invasion of external water molecules. In addition, the lone pair electrons on the N atom in the amino group of APTES form a coordination bond with perovskite by sharing the empty 6p orbital on Pb2+, which can effectively passivate the defects of the film and realize a highly uniform and dense perovskite film with preferential crystal growth orientation. The film exhibits high (110) crystal plane orientation and long carrier lifetime and mobility, which improves the performance of flexible perovskite solar cells. Using this approach, the champion device presents an optimal power conversion efficiency of 19.84% with much promoted air stability. Moreover, the efficiency of flexible devices does not decrease after maximum power point irradiation for 360 s.
- Open Access
- 28 May 2023
- Published by Wiley in Advanced Materials Interfaces
- Vol. 10 (18)
Mechanically Robust Hybrid Coatings for Antifogging, Antireflection, and Self‐Cleaning Applications
In this work, a novel multifunctional film with durable antifogging performance and remarkable optical property is designed. By doping and hybridization to build an organic–inorganic siloxane network, the surface achieves long‐lasting wettability and superhydrophilicity with a water contact angle of 0°, which is maintained within 10° for over 130 days. The low refractive index endows the hybrid film with excellent optical property, which the average transmittance (380–1100 nm) of the film is 97.60% with the peak transmittance of 99.48%. By this design, the film performs well in the felt abrasion test, water impact test, X‐cut tape test, tape‐peeling test, chemical stability test, and anti‐dust test. Due to the abundant hydroxyl radicals on the surface, the film also exhibits excellent performance, achieving 92.73% degradation of methylene blue solution (10 ppm) and 39.53% degradation of rhodamine B (10 ppm) with good reproducibility in cyclic measurements.
- 28 May 2023
- Published by Wiley in Advanced Materials Interfaces
- Vol. 10 (18)
Open AccessMechanically Robust Hybrid Coatings for Antifogging, Antireflection, and Self‐Cleaning Applications
In this work, a novel multifunctional film with durable antifogging performance and remarkable optical property is designed. By doping and hybridization to build an organic–inorganic siloxane network, the surface achieves long‐lasting wettability and superhydrophilicity with a water contact angle of 0°, which is maintained within 10° for over 130 days. The low refractive index endows the hybrid film with excellent optical property, which the average transmittance (380–1100 nm) of the film is 97.60% with the peak transmittance of 99.48%. By this design, the film performs well in the felt abrasion test, water impact test, X‐cut tape test, tape‐peeling test, chemical stability test, and anti‐dust test. Due to the abundant hydroxyl radicals on the surface, the film also exhibits excellent performance, achieving 92.73% degradation of methylene blue solution (10 ppm) and 39.53% degradation of rhodamine B (10 ppm) with good reproducibility in cyclic measurements.
- Open Access
Review on Hydrophobic Thin Films Prepared Using Magnetron Sputtering Deposition
Hydrophobic thin films have gained significant attention due to their broad applications in self-cleaning, anti-corrosion, anti-icing, medicine, oil–water separation, and other fields. The target hydrophobic materials can be deposited onto various surfaces thanks to the scalable and highly reproducible nature of magnetron sputtering, which is comprehensively overviewed in this review. While alternative preparation methods have been extensively analyzed, a systematic understanding of hydrophobic thin films fabricated using magnetron sputtering deposition is still absent. After outlining the fundamental mechanism of hydrophobicity, this review briefly summarizes three types of sputtering-deposited thin films that originate from oxides, polytetrafluoroethylene (PTFE), and diamond-like carbon (DLC), respectively, primarily focusing on the recent advances in their preparation, characteristics, and applications. Finally, the future applications, current challenges, and development of hydrophobic thin films are discussed, and a brief perspective on future research directions is provided.
Open AccessReview on Hydrophobic Thin Films Prepared Using Magnetron Sputtering Deposition
Hydrophobic thin films have gained significant attention due to their broad applications in self-cleaning, anti-corrosion, anti-icing, medicine, oil–water separation, and other fields. The target hydrophobic materials can be deposited onto various surfaces thanks to the scalable and highly reproducible nature of magnetron sputtering, which is comprehensively overviewed in this review. While alternative preparation methods have been extensively analyzed, a systematic understanding of hydrophobic thin films fabricated using magnetron sputtering deposition is still absent. After outlining the fundamental mechanism of hydrophobicity, this review briefly summarizes three types of sputtering-deposited thin films that originate from oxides, polytetrafluoroethylene (PTFE), and diamond-like carbon (DLC), respectively, primarily focusing on the recent advances in their preparation, characteristics, and applications. Finally, the future applications, current challenges, and development of hydrophobic thin films are discussed, and a brief perspective on future research directions is provided.
- 25 April 2022
- Published by Wiley in Advanced Materials Interfaces
- Vol. 9 (16)
Novel Ag‐Mesh Transparent Hybrid Electrodes for Highly Efficient and Mechanically Stable Flexible Perovskite Solar Cells
Metal‐mesh transparent conductive electrodes (TCEs)‐based flexible perovskite solar cells (FPSCs) have been intensively explored to improve the efficiency and stability of the devices, whereas undesired metal‐induced decomposition of perovskite during film formation process could undermine the performance and stability of device. In this work, the authors construct a novel flexible hybrid electrode combining silver (Ag) mesh‐embedded poly(ethylene terephthalate) film (PET/Ag‐mesh) with a thin indium tin oxide (ITO) layer, named PET/Ag‐mesh/ITO, which exhibits outstanding photoelectric properties, chemical stability, and mechanical durability. They introduce the thin ITO film as a barrier layer to protect perovskite from the metal‐induced degradation. In comparison, the PET/Ag‐mesh/ITO based FPSCs achieve an optimized power conversion efficiency (PCE) of 18.10%, which is among the highest reported values for metal‐mesh based FPSCs to date. Owing to the excellent properties of PET/Ag‐mesh/ITO, the corresponding FPSCs demonstrate extraordinary mechanical and thermal stability, which is comparable to that of their rigid ITO‐based counterparts.
- 25 April 2022
- Published by Wiley in Advanced Materials Interfaces
- Vol. 9 (16)
Novel Ag‐Mesh Transparent Hybrid Electrodes for Highly Efficient and Mechanically Stable Flexible Perovskite Solar Cells
Metal‐mesh transparent conductive electrodes (TCEs)‐based flexible perovskite solar cells (FPSCs) have been intensively explored to improve the efficiency and stability of the devices, whereas undesired metal‐induced decomposition of perovskite during film formation process could undermine the performance and stability of device. In this work, the authors construct a novel flexible hybrid electrode combining silver (Ag) mesh‐embedded poly(ethylene terephthalate) film (PET/Ag‐mesh) with a thin indium tin oxide (ITO) layer, named PET/Ag‐mesh/ITO, which exhibits outstanding photoelectric properties, chemical stability, and mechanical durability. They introduce the thin ITO film as a barrier layer to protect perovskite from the metal‐induced degradation. In comparison, the PET/Ag‐mesh/ITO based FPSCs achieve an optimized power conversion efficiency (PCE) of 18.10%, which is among the highest reported values for metal‐mesh based FPSCs to date. Owing to the excellent properties of PET/Ag‐mesh/ITO, the corresponding FPSCs demonstrate extraordinary mechanical and thermal stability, which is comparable to that of their rigid ITO‐based counterparts.
- 25 January 2022
- Published by Elsevier in Applied Surface Science
- Vol. 584
UV-cured organic–inorganic composites for highly durable and flexible antireflection coatings
- 25 January 2022
- Published by Elsevier in Applied Surface Science
- Vol. 584
UV-cured organic–inorganic composites for highly durable and flexible antireflection coatings
- 19 November 2020
- Published by Springer Nature in Journal of Materials Science
- Vol. 56 (6) , 4316-4327
Aqueous solution processed mesoporous silica-gated photo-perception neuromorphic transistor
- 19 November 2020
- Published by Springer Nature in Journal of Materials Science
- Vol. 56 (6) , 4316-4327
Aqueous solution processed mesoporous silica-gated photo-perception neuromorphic transistor