XLXiaofang Luo

Xiaofang Luo

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Xiaofang Luo has a total of 16 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Microstructure Change, Nano-Hardness and Surface Modification of CN-G01 Beryllium Induced by Helium Ions

    by Minghuan Cui, Peng Jin, Tielong Shen, Yabin Zhu, Lilong Pang, Zhiguang Wang, Xiaofang Luo, Yongjin Feng, Baoping Gong

    The helium effects in Chinese developed CN-G01 beryllium are important issues for its use in nuclear energy systems. In this work, the CN-G01 beryllium samples were irradiated with helium ions to fluences of 5.0 × 1016 ions/cm2 to 1.0 × 1018 ions/cm2 at room temperature and investigated by techniques of scanning electron microscopy (SEM), transmission electron microscopy (TEM) and nano-indentation. It was found that the irradiation induced hardening of beryllium and the nano-hardness of the samples increased with increasing fluence of 5.0 × 1016 ions/cm2 to 1.0 × 1017 ions/cm2. When the fluence reached 5.0 × 1017 ions/cm2 and 1.0 × 1018 ions/cm2, helium irradiation induced serious surface blistering and its burst. TEM observation found that helium bubbles in the damage peak region became visible when the fluence reached 1.0 × 1017 ions/cm2. With increasing fluence, helium bubbles became larger and connected into large cracks. The underlying physical mechanisms are discussed based on the helium behavior at low temperatures and the contributions of helium induced defects. This work will provide some new understanding on the irradiation resistance of CN-G01 beryllium and the helium effects in beryllium at low temperatures.


  • Open Access

    Deuterium permeability of a novel AlCrTaTiZr high entropy alloy coating

    by Wei Zhang, Long Wang, Xiaofang Luo, Baoping Gong, Xiaoyu Wang, Jijun Yang, Yongjin Feng

    AlCrTaTiZr, AlCrTaTiZr nitride, and AlCrTaTiZr oxide coatings as tritium permeation barriers (TPBs) were prepared by magnetron co-sputtering technology on a CLF-1 (RAFM) substrate, to evaluate their hydrogen/deuterium permeation resistance. X-ray diffraction (XRD) analysis showed that the as-deposited coatings were amorphous. Scanning electron microscopy (SEM) results revealed that the deposition rates of the AlCrTaTiZr coating, AlCrTaTiZr nitride coating and AlCrTaTiZr oxide coating were approximately 2 μm h−1, 0.75 μm h−1 and 0.15 μm h−1, respectively. The properties of these high-entropy alloy (HEA) coatings were studied with electrochemical hydrogen (ECH) permeation test equipment and a high-temperature gas-driven deuterium permeation (GDP) device. The AlCrTaTiZr HEA coating had the best hydrogen permeation resistance during the electrochemical hydrogen permeation test. However, the AlCrTaTiZr nitride coating had the best deuterium permeation resistance during the gas-deuterium permeation test. Annealing experiments of these coatings showed that changes in their microstructures during the gas-driven deuterium permeation test were the main reasons for the different permeabilities of these coatings during the heating and cooling processes. The oxidization of the HEA coating during the deuterium permeation experiment may have been the main reason that the HEA coating showed better deuterium permeation resistance than the HEA oxide coating.


  • Open Access

    Effect of Pebble Size Distribution and Wall Effect on Inner Packing Structure and Contact Force Distribution in Tritium Breeder Pebble Bed

    by Baoping Gong, Hao Cheng, Yongjin Feng, Xiaofang Luo, Long Wang, Xiaoyu Wang

    In the tritium breeding blanket of nuclear fusion reactors, the heat transfer behavior and thermal-mechanical response of the tritium breeder pebble bed are affected by the inner packing structure, which is crucial for the design and optimization of a reliable pebble bed in tritium breeding blanket. Thus, the effect of pebble size distribution and fixed wall effect on packing structure and contact force in the poly-disperse pebble bed were investigated by numerical simulation. The results show that pebble size distribution has a significant influence on the inner packing structure of pebble bed. With the increase of the dispersion of pebble size, the average porosity and the average coordination number of the poly-disperse pebble bed gradually decrease. Due to the influence of the fixed wall, the porosity distribution of the pebble bed shows an obvious wall effect. For poly-disperse pebble bed, the influenced region of the wall effect gradually decreases with the increase of the dispersion of pebble size. In addition, the gravity effect and the pebble size distribution have an obvious influence on the contact force distribution inside the poly-disperse pebble bed. The majority of the contact force are weak contact force that is less than the average contact force. Only a few of pebbles have strong contact force that is greater than average contact force. This investigation can help in analyzing the pebble crushing characteristics and the thermal hydraulic analysis in the poly-disperse tritium breeder pebble bed.


  • Open Access

    Influence of helium ion irradiation on the morphology and microstructure of CN-G01 beryllium

    by Xiaofang Luo, Baoping Gong, Long Wang, Minghuan Cui, Yongjin Feng

    Beryllium is considered as a candidate of ITER first-wall (FW) armor and neutron multiplier in fusion reactors. To assess the irradiation resistance of CN-G01 beryllium, which has been accepted as an alternative ITER-grade beryllium in China, 180 keV helium ions with fluences of 1.0 × 1017 ions cm−2, 5.0 × 1017 ions cm−2 and 1.0 × 1018 ions cm−2 were implanted at room temperature. The theoretical simulation of energy loss, damage distribution and helium concentration were proceeded by SRIM. In this paper, we report the experimental exploration of ion fluence effect on surface morphology and microstructure of irradiated samples. Field Emission Scanning Electron Microscope (FESEM) analysis depicted the formation and growth of helium bubbles at different irradiation ion fluences. No obvious exfoliation or cavities was observed on the surface at all ion fluences, suggesting a reliable radiation resistance of CN-G01 beryllium. Atomic force microscopy (AFM) morphology showed that the maximum height of bubbles was 47.8 nm. Surface roughness values increased slightly due to the formation of defects and bubbles on the irradiated beryllium surface. Nevertheless, the structural analysis demonstrated by grazing incidence x-ray diffraction (GIXRD), indicated an obvious preferred orientation on (101) peak at various ion fluences. Annihilation of defects caused by a small rise of the localized temperature could explain the increasing intensity of diffraction peak (101).