Taisen Yang
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Taisen Yang has a total of 5 co-authors. Here are the top co-authors by number of shared publications:
Hongyu Liu
Shenyang Huibo Heat Energy Equipment Co., Itd, Shenyang Academy of Instrumentation Science CO.,LTD, Shenyang 110043, China, Shenyang, CHINA
1 shared publicationXinggang Wu
Shenyang University of Technology, Shenyang, Liaoning, CHINA
1 shared publicationXuewei Liang
Shenyang University of Technology, Shenyang, China
1 shared publication- Yunhai Su
School of Materials Science and Engineering Shenyang University of Technology Shenyang China
1 shared publication Zhiyong Dai
Shenyang University of Technology, Shenyang, China
1 shared publication
Latest Publications
- Open Access
- 1 December 2020
- Published by IOP Publishing in Materials Research Express
- Vol. 7 (12) , 126505
Corrosion behavior of Inconel 625 deposited metal in molten KCl-MgCl2
In order to investigate the corrosion behavior of Inconel 625 deposited metal in molten KCl and MgCl2, the corrosion behavior of deposited metal immersed in molten salt for 60 h at 700 °C and 900 °C was studied by static corrosion immersion method. X-ray diffraction (XRD) and Geminisem300 were used to systematically study the phase composition, corrosion morphology and element distribution of the deposited metal. The results show that: the corrosion weight loss of the deposited metal showed an increasing trend at both temperatures, but the increasing range was different in different time intervals. The corrosion weight loss of the deposited metal increased slowly in the first 10 h, and increased sharply in the 10 h–60 h. It can be found that 10 h is the cut-off point of corrosion behavior. The corrosion rate is 0.03 mm/year at 700 °C and 0.50 mm/year at 900 °C for 10 h. The corrosion resistance of the deposited metal at 700 °C is better than that at 900 °C, which is due to the formation of dense MgO on the surface of the deposited metal at 700 °C, which hinders the corrosion reaction; at 900 °C, the content of CrCl3 on the surface of the deposited metal increases, resulting in a ‘shell breaking effect’, which destroys the MgO shell and forms NiCr2O4 with spinel structure. Its corrosion resistance is thus weakened.
- 1 December 2020
- Published by IOP Publishing in Materials Research Express
- Vol. 7 (12) , 126505
Open AccessCorrosion behavior of Inconel 625 deposited metal in molten KCl-MgCl2
In order to investigate the corrosion behavior of Inconel 625 deposited metal in molten KCl and MgCl2, the corrosion behavior of deposited metal immersed in molten salt for 60 h at 700 °C and 900 °C was studied by static corrosion immersion method. X-ray diffraction (XRD) and Geminisem300 were used to systematically study the phase composition, corrosion morphology and element distribution of the deposited metal. The results show that: the corrosion weight loss of the deposited metal showed an increasing trend at both temperatures, but the increasing range was different in different time intervals. The corrosion weight loss of the deposited metal increased slowly in the first 10 h, and increased sharply in the 10 h–60 h. It can be found that 10 h is the cut-off point of corrosion behavior. The corrosion rate is 0.03 mm/year at 700 °C and 0.50 mm/year at 900 °C for 10 h. The corrosion resistance of the deposited metal at 700 °C is better than that at 900 °C, which is due to the formation of dense MgO on the surface of the deposited metal at 700 °C, which hinders the corrosion reaction; at 900 °C, the content of CrCl3 on the surface of the deposited metal increases, resulting in a ‘shell breaking effect’, which destroys the MgO shell and forms NiCr2O4 with spinel structure. Its corrosion resistance is thus weakened.