Fangxin Xu
Research Subjects
Fangxin Xu has a total of 19 co-authors. Here are the top co-authors by number of shared publications:
- Li Feng
School of Computer Science and Engineering, Macau University of Science and Technology, Macau, China
8 shared publications - Qinglin Zhao
Macau University of Science and Technology
4 shared publications - Hong Liang
Faculty of Information Technology, Macau University of Science and Technology, Taipa, Macau
3 shared publications - Jie Yang
Faculty of Information Technology, Macau University of Science and Technology, Taipa, Macau
3 shared publications - Tong Jin
School of Computer Science and Engineering, Macau University of Science and Technology, Macau, China
3 shared publications Chao Yang
Center for Intelligent Batch Manufacturing Based on IoT Technology, Guangzhou, China
1 shared publication
Latest Publications
- 30 June 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Journal on Selected Areas in Communications
- Vol. 43 (11) , 3875-3888
CollFree: Exploiting Full-Duplex Capabilities in WiFi Contention for Enhanced Throughput Efficiency
The widespread adoption of WiFi has made throughput efficiency a critical concern in wireless networks. While Full-Duplex (FD) technology promises to double network capacity by enabling simultaneous transmission and reception, existing FD-WiFi designs primarily focus on the data transmission phase, leaving the fundamental inefficiencies in channel contention unaddressed. This paper presents CollFree, a novel WiFi protocol that exploits FD capabilities during both contention and data transmission phases. At its core, CollFree introduces a Slotwise Arbitration (SA) mechanism that enables each node to simultaneously transmit contention signals and sense channel status in each contention slot. This dual-mode operation significantly reduces contention time and facilitates collision-free data transmissions through a unique winner-determination process. We then develop theoretical models to analyze CollFree’s contention performance and throughput efficiency under both perfect and imperfect Clear Channel Assessment (CCA) conditions, providing guidelines for parameter optimization in practical deployments. Extensive simulations demonstrate that CollFree enhances throughput efficiency by over 20% compared to state-of-the-art FD-WiFi systems while maintaining distributed control and compatibility with current WiFi standards. These results suggest that CollFree represents a significant step toward realizing the full potential of FD technology in next-generation WiFi networks.
- 30 June 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Journal on Selected Areas in Communications
- Vol. 43 (11) , 3875-3888
CollFree: Exploiting Full-Duplex Capabilities in WiFi Contention for Enhanced Throughput Efficiency
The widespread adoption of WiFi has made throughput efficiency a critical concern in wireless networks. While Full-Duplex (FD) technology promises to double network capacity by enabling simultaneous transmission and reception, existing FD-WiFi designs primarily focus on the data transmission phase, leaving the fundamental inefficiencies in channel contention unaddressed. This paper presents CollFree, a novel WiFi protocol that exploits FD capabilities during both contention and data transmission phases. At its core, CollFree introduces a Slotwise Arbitration (SA) mechanism that enables each node to simultaneously transmit contention signals and sense channel status in each contention slot. This dual-mode operation significantly reduces contention time and facilitates collision-free data transmissions through a unique winner-determination process. We then develop theoretical models to analyze CollFree’s contention performance and throughput efficiency under both perfect and imperfect Clear Channel Assessment (CCA) conditions, providing guidelines for parameter optimization in practical deployments. Extensive simulations demonstrate that CollFree enhances throughput efficiency by over 20% compared to state-of-the-art FD-WiFi systems while maintaining distributed control and compatibility with current WiFi standards. These results suggest that CollFree represents a significant step toward realizing the full potential of FD technology in next-generation WiFi networks.
- 31 October 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Internet of Things Journal
- Vol. 11 (6) , 10398-10410
Contention With Collision Detection in Wireless Full-Duplex Networks
Conventional wireless networks are half-duplex and most of them use contention-based protocols. These protocols usually adopt a principle of contention with collision avoidance and infer a collision occurrence very late from the absence of an acknowledgment after data transmission, causing low network performance. Wireless full-duplex (FD) enables simultaneous transmission (TX) and reception (RX) on the same channel. Exploiting this functionality, this article proposes the first design that enables contention with collision detection (CCD) to improve the network performance. We call the proposed design FD-CCD. With FD-CCD, in contention, a node exploits the TX antenna to transmit a signal for channel contention, while exploiting the RX antenna to sense if other nodes are transmitting too. By checking the status of the TX and RX antennas, the node can detect the contention collision before data transmission and, hence, obtain an opportunity to avoid the data collision effectively. FD-CCD also supports priority-based contentions, is of very low contention overhead, and is compatible with conventional 802.11 networks. This article then develops a theoretical model to analyze the system performance and optimize protocol parameter settings. Extensive simulations verify the effectiveness of our design and the accuracy of our model. This study is very helpful in designing efficient FD protocols.
- 31 October 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Internet of Things Journal
- Vol. 11 (6) , 10398-10410
Contention With Collision Detection in Wireless Full-Duplex Networks
Conventional wireless networks are half-duplex and most of them use contention-based protocols. These protocols usually adopt a principle of contention with collision avoidance and infer a collision occurrence very late from the absence of an acknowledgment after data transmission, causing low network performance. Wireless full-duplex (FD) enables simultaneous transmission (TX) and reception (RX) on the same channel. Exploiting this functionality, this article proposes the first design that enables contention with collision detection (CCD) to improve the network performance. We call the proposed design FD-CCD. With FD-CCD, in contention, a node exploits the TX antenna to transmit a signal for channel contention, while exploiting the RX antenna to sense if other nodes are transmitting too. By checking the status of the TX and RX antennas, the node can detect the contention collision before data transmission and, hence, obtain an opportunity to avoid the data collision effectively. FD-CCD also supports priority-based contentions, is of very low contention overhead, and is compatible with conventional 802.11 networks. This article then develops a theoretical model to analyze the system performance and optimize protocol parameter settings. Extensive simulations verify the effectiveness of our design and the accuracy of our model. This study is very helpful in designing efficient FD protocols.
- 1 June 2022
- Published by Springer Nature in The Journal of Supercomputing
- Vol. 78 (16) , 18130-18152
Design and analysis of a novel collision notification scheme for IoT environments
- 1 June 2022
- Published by Springer Nature in The Journal of Supercomputing
- Vol. 78 (16) , 18130-18152
Design and analysis of a novel collision notification scheme for IoT environments
- Open Access
- 18 August 2021
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Access
- Vol. 9, 124861-124872
A Novel Successive-Interference-Cancellation- Aware Design for Wireless Networks Using Software-Defined Networking
In traditional CSMA/CA-based MAC designs supporting successive interference cancellation (SIC), channel utilization is inefficient, because the inherited CSMA/CA-style contention approach often forces the whole channel to remain idle and the early released channel is not utilized. In this paper, we propose Multi-CQ, which is the first software-defined networking (SDN)-based MAC design for wireless LANs that supports SIC and significantly improves the channel utilization. Multi-CQ, adopting SDN's functional separation idea and OFDMA, makes contention and data transmission be executed over two subchannels independently and concurrently, where the superposition coding are used for decoding combined signals, and multiple CQs (contention queues) are introduced to coordinate the concurrency. This concurrent execution greatly reduces the waste in channel contention. Next, adopting SDN's central control idea, Multi-CQ controller selects nodes who can finish their frame transmissions in almost equal time, thereby improving the channel utilization. Finally, we develop a theoretical model to optimize bandwidth allocation for channel contention and data transmission. Extensive simulations verify the effectiveness of our design and the accuracy of our theoretical model. This study is also helpful to better design wireless MAC protocols supporting other advanced functionalities such as MU-MIMO.
- 18 August 2021
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Access
- Vol. 9, 124861-124872
Open AccessA Novel Successive-Interference-Cancellation- Aware Design for Wireless Networks Using Software-Defined Networking
In traditional CSMA/CA-based MAC designs supporting successive interference cancellation (SIC), channel utilization is inefficient, because the inherited CSMA/CA-style contention approach often forces the whole channel to remain idle and the early released channel is not utilized. In this paper, we propose Multi-CQ, which is the first software-defined networking (SDN)-based MAC design for wireless LANs that supports SIC and significantly improves the channel utilization. Multi-CQ, adopting SDN's functional separation idea and OFDMA, makes contention and data transmission be executed over two subchannels independently and concurrently, where the superposition coding are used for decoding combined signals, and multiple CQs (contention queues) are introduced to coordinate the concurrency. This concurrent execution greatly reduces the waste in channel contention. Next, adopting SDN's central control idea, Multi-CQ controller selects nodes who can finish their frame transmissions in almost equal time, thereby improving the channel utilization. Finally, we develop a theoretical model to optimize bandwidth allocation for channel contention and data transmission. Extensive simulations verify the effectiveness of our design and the accuracy of our theoretical model. This study is also helpful to better design wireless MAC protocols supporting other advanced functionalities such as MU-MIMO.
- Open Access
- 28 December 2020
- Published by Wiley in Security and Communication Networks
- Vol. 2020, 1-18
Enabling Sector Scheduling for 5G-CPE Dense Networks
5G customer premise equipment (5G-CPE) is an IoT gateway technology that integrates 5G and Wi-Fi and therefore can provide Wi-Fi connection for IoT devices and meanwhile benefit from the advantages of 5G. With the increasing number of IoT devices, transmission collisions and hidden/exposed terminal problems on the Wi-Fi connection side become more and more serious. Conventional mechanisms cannot solve these problems well. In this paper, we propose a Wi-Fi sector (Wi-FiS) design, which is compatible with Wi-Fi, to solve them fundamentally. Wi-FiS divides the whole coverage area of Wi-Fi into multiple sectors and utilizes beamforming technology and sector-based scheduling to improve system performance of Wi-Fi dense networks. For a single-cell network, Wi-FiS differentiates uplink and downlink operations and totally excludes collision in downlink. For a multicell network, Wi-FiS can avoid hidden and exposed terminal problems, while enabling parallel transmissions among multiple cells. We then develop a theoretical model to analyze Wi-FiS’s throughput. Extensive simulations verify that our theoretical model is very accurate and Wi-FiS can improve system throughput of Wi-Fi dense networks significantly.
- 28 December 2020
- Published by Wiley in Security and Communication Networks
- Vol. 2020, 1-18
Open AccessEnabling Sector Scheduling for 5G-CPE Dense Networks
5G customer premise equipment (5G-CPE) is an IoT gateway technology that integrates 5G and Wi-Fi and therefore can provide Wi-Fi connection for IoT devices and meanwhile benefit from the advantages of 5G. With the increasing number of IoT devices, transmission collisions and hidden/exposed terminal problems on the Wi-Fi connection side become more and more serious. Conventional mechanisms cannot solve these problems well. In this paper, we propose a Wi-Fi sector (Wi-FiS) design, which is compatible with Wi-Fi, to solve them fundamentally. Wi-FiS divides the whole coverage area of Wi-Fi into multiple sectors and utilizes beamforming technology and sector-based scheduling to improve system performance of Wi-Fi dense networks. For a single-cell network, Wi-FiS differentiates uplink and downlink operations and totally excludes collision in downlink. For a multicell network, Wi-FiS can avoid hidden and exposed terminal problems, while enabling parallel transmissions among multiple cells. We then develop a theoretical model to analyze Wi-FiS’s throughput. Extensive simulations verify that our theoretical model is very accurate and Wi-FiS can improve system throughput of Wi-Fi dense networks significantly.
- 1 December 2020
- Published by Springer Nature
- p. 154-162
Wi-Sector - A Novel Sector-Based WiFi Scheduling
- 1 December 2020
- Published by Springer Nature
- p. 154-162
Wi-Sector - A Novel Sector-Based WiFi Scheduling
- 9 December 2019
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Mobile Computing
- Vol. 20 (3) , 1046-1063
How Much Benefit Can Dynamic Frequency Scaling Bring to WiFi?
Dynamic frequency scaling (DFS) is a state-of-the-art power-saving technique. Various DFS-based WiFi schemes have been proposed for power saving. These schemes demonstrated the power-saving feasibility of DFS via hardware implementation or simulation. This paper is the first that proposes a general theoretical framework to evaluate the performance of these schemes, where we use Queuing theory to analyze the system throughput and use Semi-Markov theory to quantify the power consumption. In addition, we adopt the energy efficiency (i.e., the throughput per energy cost) to compare the gains of these schemes. This efficiency measure can be used to make a trade-off between system throughput and power consumption and therefore help us choose appropriate parameter settings. Extensive simulations verify that our theoretical model is very accurate and our theoretical results well match with universal software radio peripheral (USRP) experiment results. Our study shows that DFS can greatly improve the energy efficiency of WiFi networks even under low SNR conditions; for example, when SNR=9.7dB, the improvement is around 16% for 802.11 ac at rate 1300Mb/s. Our study also shows that DFS can be well integrated with other commonly used power-saving mechanisms to improve the energy efficiency further.
- 9 December 2019
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Mobile Computing
- Vol. 20 (3) , 1046-1063
How Much Benefit Can Dynamic Frequency Scaling Bring to WiFi?
Dynamic frequency scaling (DFS) is a state-of-the-art power-saving technique. Various DFS-based WiFi schemes have been proposed for power saving. These schemes demonstrated the power-saving feasibility of DFS via hardware implementation or simulation. This paper is the first that proposes a general theoretical framework to evaluate the performance of these schemes, where we use Queuing theory to analyze the system throughput and use Semi-Markov theory to quantify the power consumption. In addition, we adopt the energy efficiency (i.e., the throughput per energy cost) to compare the gains of these schemes. This efficiency measure can be used to make a trade-off between system throughput and power consumption and therefore help us choose appropriate parameter settings. Extensive simulations verify that our theoretical model is very accurate and our theoretical results well match with universal software radio peripheral (USRP) experiment results. Our study shows that DFS can greatly improve the energy efficiency of WiFi networks even under low SNR conditions; for example, when SNR=9.7dB, the improvement is around 16% for 802.11 ac at rate 1300Mb/s. Our study also shows that DFS can be well integrated with other commonly used power-saving mechanisms to improve the energy efficiency further.
- 6 September 2018
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Internet of Things Journal
- Vol. 6 (1) , 1246-1256
Design and Analysis of a Distributed and Demand-Based Backscatter MAC Protocol for Internet of Things Networks
Backscatter communication is a new wireless communication technology, which can enable battery-free devices to communicate with others by backscattering ambient radio-frequency signals, and therefore has great potential to be deployed in future Internet of Things (IoT) networks. In the existing related studies, the adopted centralized approach might be not suitable for a large-scale IoT network with sporadic backscatter communication, while the adopted distributed approach ignored the demand of the AP. In this paper, we consider a large-scale IoT network consisting of the legacy Wi-Fi communication and the backscatter communication, and aim to propose an efficient distributed backscatter medium access control (MAC) protocol that takes into account of the demand of the AP. In our protocol, when the AP has a demand to collect the information of backscatter devices, it enables backscatter devices to contend for the channel with Wi-Fi devices in a separate manner, where the backscatter devices are only allowed to participate in the contention in a limited time period. We then characterize this constrained contention process and develop a theoretical model to analyze the performance of the proposed protocol. With this model, we can exactly express the per-node throughput of Wi-Fi and backscatter devices. Finally, extensive simulations verify that our model is much accurate, and our protocol can outperform the related protocol in terms of both per-node throughput and system throughput.
- 6 September 2018
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Internet of Things Journal
- Vol. 6 (1) , 1246-1256
Design and Analysis of a Distributed and Demand-Based Backscatter MAC Protocol for Internet of Things Networks
Backscatter communication is a new wireless communication technology, which can enable battery-free devices to communicate with others by backscattering ambient radio-frequency signals, and therefore has great potential to be deployed in future Internet of Things (IoT) networks. In the existing related studies, the adopted centralized approach might be not suitable for a large-scale IoT network with sporadic backscatter communication, while the adopted distributed approach ignored the demand of the AP. In this paper, we consider a large-scale IoT network consisting of the legacy Wi-Fi communication and the backscatter communication, and aim to propose an efficient distributed backscatter medium access control (MAC) protocol that takes into account of the demand of the AP. In our protocol, when the AP has a demand to collect the information of backscatter devices, it enables backscatter devices to contend for the channel with Wi-Fi devices in a separate manner, where the backscatter devices are only allowed to participate in the contention in a limited time period. We then characterize this constrained contention process and develop a theoretical model to analyze the performance of the proposed protocol. With this model, we can exactly express the per-node throughput of Wi-Fi and backscatter devices. Finally, extensive simulations verify that our model is much accurate, and our protocol can outperform the related protocol in terms of both per-node throughput and system throughput.