Lukas Pfeuffer
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Lukas Pfeuffer has a total of 53 co-authors. Here are the top co-authors by number of shared publications:
- Konstantin P. Skokov
Technical University of Darmstadt
8 shared publications - Oliver Gutfleisch
Institute of Materials Science, Technical University of Darmstadt, Darmstadt, Germany
7 shared publications - Franziska Scheibel
Technical University of Darmstadt
6 shared publications - Tino Gottschall
Dresden High Magnetic Field Laboratory (HLD-EMFL) and Würzburg-Dresden Cluster of Excellence ct.qmat, Helmholtz-Zentrum Dresden-Rossendorf, Dresden, Germany
5 shared publications Andreas Taubel
4 shared publicationsDavid Koch
4 shared publications
Latest Publications
- Open Access
- 7 January 2025
- Published by AIP Publishing in Journal of Applied Physics
- Vol. 137 (1)
Multicaloric effect in FeRh, exploiting the thermal hysteresis in a multi-stimuli cycle combining pulsed magnetic field and uniaxial load
Large magnetocaloric effects can be observed in materials with first-order magneto-structural phase transition. However, materials with large thermal hysteresis show a reduced effect in moderate fields (∼2 T) because the external field is insufficient to induce a fully reversible transformation. The hysteresis can be overcome or even exploited by applying a second external stimulus. A multi-stimuli test bench has been built to demonstrate the multicaloric effect in FeRh alloy using a pulsed magnetic field up to 9 T and a uniaxial stress of up to 700 MPa. A cyclic multicaloric effect of ±2.5 K could be observed for a sequential application of a pulsed field of 3 T and a uniaxial stress of 700 MPa. The interplay among external field strength, thermal hysteresis, and the transition width enables the use of pulsed magnetic fields and allows a decoupling of the applied magnetic field and the heat transfer process in the multi-stimuli cycle.
- 7 January 2025
- Published by AIP Publishing in Journal of Applied Physics
- Vol. 137 (1)
Open AccessMulticaloric effect in FeRh, exploiting the thermal hysteresis in a multi-stimuli cycle combining pulsed magnetic field and uniaxial load
Large magnetocaloric effects can be observed in materials with first-order magneto-structural phase transition. However, materials with large thermal hysteresis show a reduced effect in moderate fields (∼2 T) because the external field is insufficient to induce a fully reversible transformation. The hysteresis can be overcome or even exploited by applying a second external stimulus. A multi-stimuli test bench has been built to demonstrate the multicaloric effect in FeRh alloy using a pulsed magnetic field up to 9 T and a uniaxial stress of up to 700 MPa. A cyclic multicaloric effect of ±2.5 K could be observed for a sequential application of a pulsed field of 3 T and a uniaxial stress of 700 MPa. The interplay among external field strength, thermal hysteresis, and the transition width enables the use of pulsed magnetic fields and allows a decoupling of the applied magnetic field and the heat transfer process in the multi-stimuli cycle.
- Open Access
- 15 October 2024
- Published by Elsevier in Acta Materialia
- Vol. 282
Giant magnetocaloric effect of Ni-Co-Mn-Ti all-d Heusler alloys in high magnetic fields
- 15 October 2024
- Published by Elsevier in Acta Materialia
- Vol. 282
Open AccessGiant magnetocaloric effect of Ni-Co-Mn-Ti all-d Heusler alloys in high magnetic fields
- Open Access
- 4 December 2023
- Published by Elsevier in Acta Materialia
- Vol. 264
Martensitic phase transformation in short-range ordered Fe50Rh50 system induced by thermal stress and mechanical deformation
- 4 December 2023
- Published by Elsevier in Acta Materialia
- Vol. 264
Open AccessMartensitic phase transformation in short-range ordered Fe50Rh50 system induced by thermal stress and mechanical deformation
- Open Access
- 17 February 2023
- Published by AIP Publishing in Journal of Applied Physics
- Vol. 133 (7) , 075104
Influence of Gd-rich precipitates on the martensitic transformation, magnetocaloric effect, and mechanical properties of Ni–Mn–In Heusler alloys—A comparative study
A multi-stimuli cooling cycle can be used to increase the cyclic caloric performance of multicaloric materials like Ni–Mn–In Heusler alloys. However, the use of uniaxial compressive stress as an additional external stimulus to a magnetic field requires good mechanical stability. Improvement in mechanical stability and strength by doping has been shown in several studies. However, doping is always accompanied by grain refinement and a change in transition temperature. This raises the question of the extent to which mechanical strength is related to grain refinement, transition temperature, or precipitates. This study shows a direct comparison between a single-phase Ni–Mn–In and a two-phase Gd-doped Ni–Mn–In alloy with the same transition temperature and grain size. It is shown that the excellent magnetocaloric properties of the Ni–Mn–In matrix are maintained with doping. The isothermal entropy change and adiabatic temperature change are reduced by only 15% in the two-phase Ni–Mn–In Heusler alloy compared to the single-phase alloy, which results from a slight increase in thermal hysteresis and the width of the transition. Due to the same grain size and transition temperature, this effect can be directly related to the precipitates. The introduction of Gd precipitates leads to a 100% improvement in mechanical strength, which is significantly lower than the improvement observed for Ni–Mn–In alloys with grain refinement and Gd precipitates. This reveals that a significant contribution to the improved mechanical stability in Gd-doped Heusler alloys is related to grain refinement.
- 17 February 2023
- Published by AIP Publishing in Journal of Applied Physics
- Vol. 133 (7) , 075104
Open AccessInfluence of Gd-rich precipitates on the martensitic transformation, magnetocaloric effect, and mechanical properties of Ni–Mn–In Heusler alloys—A comparative study
A multi-stimuli cooling cycle can be used to increase the cyclic caloric performance of multicaloric materials like Ni–Mn–In Heusler alloys. However, the use of uniaxial compressive stress as an additional external stimulus to a magnetic field requires good mechanical stability. Improvement in mechanical stability and strength by doping has been shown in several studies. However, doping is always accompanied by grain refinement and a change in transition temperature. This raises the question of the extent to which mechanical strength is related to grain refinement, transition temperature, or precipitates. This study shows a direct comparison between a single-phase Ni–Mn–In and a two-phase Gd-doped Ni–Mn–In alloy with the same transition temperature and grain size. It is shown that the excellent magnetocaloric properties of the Ni–Mn–In matrix are maintained with doping. The isothermal entropy change and adiabatic temperature change are reduced by only 15% in the two-phase Ni–Mn–In Heusler alloy compared to the single-phase alloy, which results from a slight increase in thermal hysteresis and the width of the transition. Due to the same grain size and transition temperature, this effect can be directly related to the precipitates. The introduction of Gd precipitates leads to a 100% improvement in mechanical strength, which is significantly lower than the improvement observed for Ni–Mn–In alloys with grain refinement and Gd precipitates. This reveals that a significant contribution to the improved mechanical stability in Gd-doped Heusler alloys is related to grain refinement.
- Open Access
- 10 January 2023
- Published by Elsevier in Acta Materialia
- Vol. 246
Dissipation losses limiting first-order phase transition materials in cryogenic caloric cooling: A case study on all-d-metal Ni(-Co)-Mn-Ti Heusler alloys
- 10 January 2023
- Published by Elsevier in Acta Materialia
- Vol. 246
Open AccessDissipation losses limiting first-order phase transition materials in cryogenic caloric cooling: A case study on all-d-metal Ni(-Co)-Mn-Ti Heusler alloys
- 1 September 2021
- Published by Elsevier in Acta Materialia
- Vol. 217
Influence of microstructure on the application of Ni-Mn-In Heusler compounds for multicaloric cooling using magnetic field and uniaxial stress
- 1 September 2021
- Published by Elsevier in Acta Materialia
- Vol. 217
Influence of microstructure on the application of Ni-Mn-In Heusler compounds for multicaloric cooling using magnetic field and uniaxial stress
- 1 December 2020
- Published by AIP Publishing in Applied Physics Reviews
- Vol. 7 (4) , 041406
Multicaloric effects in metamagnetic Heusler Ni-Mn-In under uniaxial stress and magnetic field
The world's growing hunger for artificial cold, on the one hand, and the ever more stringent climate targets, on the other, pose an enormous challenge to mankind. Novel, efficient, and environmentally friendly refrigeration technologies based on solid-state refrigerants can offer a way out of the problems arising from climate-damaging substances used in conventional vapor-compressors. Multicaloric materials stand out because of their large temperature changes, which can be induced by the application of different external stimuli such as a magnetic, electric, or a mechanical field. Despite the high potential for applications and the interesting physics of this group of materials, few studies focus on their investigation by direct methods. In this paper, we report on the advanced characterization of all relevant physical quantities that determine the multicaloric effect of a Ni-Mn-In Heusler compound. We have used a purpose-designed calorimeter to determine the isothermal entropy and adiabatic temperature changes resulting from the combined action of magnetic field and uniaxial stress on this metamagnetic shape-memory alloy. From these results, we can conclude that the multicaloric response of this alloy by appropriate changes of uniaxial stress and magnetic field largely outperforms the caloric response of the alloy when subjected to only a single stimulus. We anticipate that our findings can be applied to other multicaloric materials, thus inspiring the development of refrigeration devices based on the multicaloric effect.
- 1 December 2020
- Published by AIP Publishing in Applied Physics Reviews
- Vol. 7 (4) , 041406
Multicaloric effects in metamagnetic Heusler Ni-Mn-In under uniaxial stress and magnetic field
The world's growing hunger for artificial cold, on the one hand, and the ever more stringent climate targets, on the other, pose an enormous challenge to mankind. Novel, efficient, and environmentally friendly refrigeration technologies based on solid-state refrigerants can offer a way out of the problems arising from climate-damaging substances used in conventional vapor-compressors. Multicaloric materials stand out because of their large temperature changes, which can be induced by the application of different external stimuli such as a magnetic, electric, or a mechanical field. Despite the high potential for applications and the interesting physics of this group of materials, few studies focus on their investigation by direct methods. In this paper, we report on the advanced characterization of all relevant physical quantities that determine the multicaloric effect of a Ni-Mn-In Heusler compound. We have used a purpose-designed calorimeter to determine the isothermal entropy and adiabatic temperature changes resulting from the combined action of magnetic field and uniaxial stress on this metamagnetic shape-memory alloy. From these results, we can conclude that the multicaloric response of this alloy by appropriate changes of uniaxial stress and magnetic field largely outperforms the caloric response of the alloy when subjected to only a single stimulus. We anticipate that our findings can be applied to other multicaloric materials, thus inspiring the development of refrigeration devices based on the multicaloric effect.
- 30 November 2020
- Published by American Physical Society (APS) in Physical Review Materials
- Vol. 4 (11) , 111401
Influence of the martensitic transformation kinetics on the magnetocaloric effect in Ni-Mn-In
The inverse magnetocaloric effect in Ni-Mn based Heusler compounds occurs during the magnetostructural transition between low-temperature, low-magnetization martensite and high-temperature, high-magnetization austenite. In this study, we analyze the metamagnetic transformation of a compound by simultaneous adiabatic temperature change and strain measurements in pulsed magnetic fields up to 10 T. We observe a of −10 K and a of −0.22% when the reverse martensitic transition is fully induced at a starting temperature of 285 K. By a variation of the magnetic field-sweep rates between 316, 865, and , the transitional dynamics of the reverse martensitic transformation have been investigated. Our experiments reveal an apparent delay upon the end of the reverse martensitic transformation at field rates exceeding which is related to the annihilation of retained martensite. As a consequence, the field hysteresis increases and higher fields are required to saturate the transition. In contrast, no time-dependent effects on the onset of the reverse martensitic transformation were observed in the studied field-sweep range. Our results demonstrate that kinetic effects in Heusler compounds strongly affect the magnetic cooling cycle, especially when utilizing a multicaloric “exploiting-hysteresis cycle” where high magnetic field-sweep rates are employed.- 30 November 2020
- Published by American Physical Society (APS) in Physical Review Materials
- Vol. 4 (11) , 111401
Influence of the martensitic transformation kinetics on the magnetocaloric effect in Ni-Mn-In
The inverse magnetocaloric effect in Ni-Mn based Heusler compounds occurs during the magnetostructural transition between low-temperature, low-magnetization martensite and high-temperature, high-magnetization austenite. In this study, we analyze the metamagnetic transformation of a compound by simultaneous adiabatic temperature change and strain measurements in pulsed magnetic fields up to 10 T. We observe a of −10 K and a of −0.22% when the reverse martensitic transition is fully induced at a starting temperature of 285 K. By a variation of the magnetic field-sweep rates between 316, 865, and , the transitional dynamics of the reverse martensitic transformation have been investigated. Our experiments reveal an apparent delay upon the end of the reverse martensitic transformation at field rates exceeding which is related to the annihilation of retained martensite. As a consequence, the field hysteresis increases and higher fields are required to saturate the transition. In contrast, no time-dependent effects on the onset of the reverse martensitic transformation were observed in the studied field-sweep range. Our results demonstrate that kinetic effects in Heusler compounds strongly affect the magnetic cooling cycle, especially when utilizing a multicaloric “exploiting-hysteresis cycle” where high magnetic field-sweep rates are employed.