David Escobedo Zenil
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
David Escobedo Zenil has a total of 12 co-authors. Here are the top co-authors by number of shared publications:
- Martín Cárdenas-Soto
National Autonomous University of México
8 shared publications - Jesús Sánchez-González
National Autonomous University of México
7 shared publications - Gerardo Cifuentes-Nava
Instituto de Geofísica
6 shared publications - Jose Antonio Martinez-Gonzalez
National Autonomous University of Mexico (UNAM)
4 shared publications - José Antonio Martínez-González
National Autonomous University of México
3 shared publications - José Piña-Flores
Instituto de Ingeniería, Universidad Veracruzana, S. S. Juan Pablo II, Zona Universitaria, Boca del Río 94294, Mexico
2 shared publications
Latest Publications
- 31 March 2025
- Published by Springer Nature
- p. 53-60
Subsoil Geophysical Conditions and Seismic Response of the Mining Palace, Mexico
- 31 March 2025
- Published by Springer Nature
- p. 53-60
Subsoil Geophysical Conditions and Seismic Response of the Mining Palace, Mexico
- Open Access
- 18 June 2024
- Published by Universidad Nacional Autonoma de Mexico in Geofísica Internacional
- Vol. 63 (3) , 949-958
A combination of seismic refraction and ambient noise methods to detect landslide-prone materials
A portion of the west of Mexico City is densely populated in an abrupt topography, whose volcano-sedimentary materials increase the likelihood of landslides. We exploited the geometry of a quadrangular geophones array to apply Seismic Refraction Tomography (SRT) and Ambient Noise Tomography (ANT) methods and explore the extent of landslide-prone materials. The results show low-velocity areas (Vs < 100 m/s, being Vs group velocities) associated with materials that have lost their resistance due to the increase in pore pressure and the places where eventually, more landslides will occur (120 < Vs < 200 m/s) if mitigation work is not carried out. The most stable zones correspond to materials with velocity values greater than 250 m/s that overlap a bedrock at an average depth of 8 m. Thus, when it is not advisable to perform active source experiments, ANT can provide practical results to determine the extension of the sliding materials.
- 18 June 2024
- Published by Universidad Nacional Autonoma de Mexico in Geofísica Internacional
- Vol. 63 (3) , 949-958
Open AccessA combination of seismic refraction and ambient noise methods to detect landslide-prone materials
A portion of the west of Mexico City is densely populated in an abrupt topography, whose volcano-sedimentary materials increase the likelihood of landslides. We exploited the geometry of a quadrangular geophones array to apply Seismic Refraction Tomography (SRT) and Ambient Noise Tomography (ANT) methods and explore the extent of landslide-prone materials. The results show low-velocity areas (Vs < 100 m/s, being Vs group velocities) associated with materials that have lost their resistance due to the increase in pore pressure and the places where eventually, more landslides will occur (120 < Vs < 200 m/s) if mitigation work is not carried out. The most stable zones correspond to materials with velocity values greater than 250 m/s that overlap a bedrock at an average depth of 8 m. Thus, when it is not advisable to perform active source experiments, ANT can provide practical results to determine the extension of the sliding materials.
- Open Access
- 7 December 2021
- Published by Wiley in ESS Open Archive
Detecting Underground Mines by Seismic Noise Autocorrelation and Geophysical Methods
Seismic noise correlation is one of the most used tools to know the earth's structure in the last decade. In this study, we used autocorrelation to determine the presence of underground mines by extracting the normal seismic response in transmission between the ground surface and the cavity roof. The experiments are carried out in the urban environment of the Mexico City western zone, where a high risk of mines collapse subsists. For this, we use ambient noise recorded for 30 min in vertical 4.5 Hz geophone arrays. We obtain zero offset sections of power spectra density from the stacking of autocorrelations in 4 s time windows. The results are compared with GPR, ERT, and seismic refraction studies. We observe that surface cavities such as drainpipe systems are present at frequencies greater than 30 Hz. Between 10 and 30 Hz, the seismic response is produced by resonances associated with cavities that can be delimited laterally by spectral maxima and whose presence agrees with discontinuities on radargrams. The mine roof depth is related to half-wavelength and the compression wave velocity of the surface layer determined by seismic refraction. The autocorrelation method does not determine the shape or vertical extent of the cavity, which is well resolved by the high resistivity values of the ERT method. However, low spectral amplitudes are observed on saturated materials where the electromagnetic wave is noisy and low resistivity values are resolved.
- 7 December 2021
- Published by Wiley in ESS Open Archive
Open AccessDetecting Underground Mines by Seismic Noise Autocorrelation and Geophysical Methods
Seismic noise correlation is one of the most used tools to know the earth's structure in the last decade. In this study, we used autocorrelation to determine the presence of underground mines by extracting the normal seismic response in transmission between the ground surface and the cavity roof. The experiments are carried out in the urban environment of the Mexico City western zone, where a high risk of mines collapse subsists. For this, we use ambient noise recorded for 30 min in vertical 4.5 Hz geophone arrays. We obtain zero offset sections of power spectra density from the stacking of autocorrelations in 4 s time windows. The results are compared with GPR, ERT, and seismic refraction studies. We observe that surface cavities such as drainpipe systems are present at frequencies greater than 30 Hz. Between 10 and 30 Hz, the seismic response is produced by resonances associated with cavities that can be delimited laterally by spectral maxima and whose presence agrees with discontinuities on radargrams. The mine roof depth is related to half-wavelength and the compression wave velocity of the surface layer determined by seismic refraction. The autocorrelation method does not determine the shape or vertical extent of the cavity, which is well resolved by the high resistivity values of the ERT method. However, low spectral amplitudes are observed on saturated materials where the electromagnetic wave is noisy and low resistivity values are resolved.
- Open Access
- 7 December 2021
- Published by Wiley in ESS Open Archive
GEOPHYSICAL SUBSOIL CHARACTERIZATION OF A HOUSING UNIT SHAKEN BY THE EARTHQUAKE OF SEPTEMBER 19, 2017 (MW 7.1)
September 19, 2017 earthquake considerably affected the southern area of Mexico City; specically, in the transition zone, some local subsidence problems were accentuated. This site is associated with a high geological hazard due to faults, cracks, subsidence, landslides, and collapses. The lesson learned from this earthquake showed that much remains to be known, and detailed characterization is needed to dene vulnerable sites that allow for reduction seismic-geological risk. This study used various geophysical methods to explore the subsoil of a housing unit south of Mexico City. The houses began having structural damage on the site, and the surface of the land presented cracks since the year 2012, problems that were magnied after the earthquake. We apply electrical tomography, seismic noise interferometry, and H/V methods. The results show the properties of the subsoil vary drastically both in the lateral direction and in-depth. In particular, it highlights the presence of a discontinuity that divides the area into two different structures. Our interpretations show that the observed damages are due to a series of conjugated events that accentuate differential subsidence: irregularity in subsoil structure and properties, local overexploitation of groundwater, and dynamic amplication effects that accelerate relative displacements during seismic motions.
- 7 December 2021
- Published by Wiley in ESS Open Archive
Open AccessGEOPHYSICAL SUBSOIL CHARACTERIZATION OF A HOUSING UNIT SHAKEN BY THE EARTHQUAKE OF SEPTEMBER 19, 2017 (MW 7.1)
September 19, 2017 earthquake considerably affected the southern area of Mexico City; specically, in the transition zone, some local subsidence problems were accentuated. This site is associated with a high geological hazard due to faults, cracks, subsidence, landslides, and collapses. The lesson learned from this earthquake showed that much remains to be known, and detailed characterization is needed to dene vulnerable sites that allow for reduction seismic-geological risk. This study used various geophysical methods to explore the subsoil of a housing unit south of Mexico City. The houses began having structural damage on the site, and the surface of the land presented cracks since the year 2012, problems that were magnied after the earthquake. We apply electrical tomography, seismic noise interferometry, and H/V methods. The results show the properties of the subsoil vary drastically both in the lateral direction and in-depth. In particular, it highlights the presence of a discontinuity that divides the area into two different structures. Our interpretations show that the observed damages are due to a series of conjugated events that accentuate differential subsidence: irregularity in subsoil structure and properties, local overexploitation of groundwater, and dynamic amplication effects that accelerate relative displacements during seismic motions.
- Open Access
- 6 December 2021
- Published by Wiley in ESS Open Archive
Detecting Underground Mines by Seismic Noise Autocorrelation and Geophysical Methods
Seismic noise correlation is one of the most used tools to know the earth's structure in the last decade. In this study, we used autocorrelation to determine the presence of underground mines by extracting the normal seismic response in transmission between the ground surface and the cavity roof. The experiments are carried out in the urban environment of the Mexico City western zone, where a high risk of mines collapse subsists. For this, we use ambient noise recorded for 30 min in vertical 4.5 Hz geophone arrays. We obtain zero offset sections of power spectra density from the stacking of autocorrelations in 4 s time windows. The results are compared with GPR, ERT, and seismic refraction studies. We observe that surface cavities such as drainpipe systems are present at frequencies greater than 30 Hz. Between 10 and 30 Hz, the seismic response is produced by resonances associated with cavities that can be delimited laterally by spectral maxima and whose presence agrees with discontinuities on radargrams. The mine roof depth is related to half-wavelength and the compression wave velocity of the surface layer determined by seismic refraction. The autocorrelation method does not determine the shape or vertical extent of the cavity, which is well resolved by the high resistivity values of the ERT method. However, low spectral amplitudes are observed on saturated materials where the electromagnetic wave is noisy and low resistivity values are resolved.
- 6 December 2021
- Published by Wiley in ESS Open Archive
Open AccessDetecting Underground Mines by Seismic Noise Autocorrelation and Geophysical Methods
Seismic noise correlation is one of the most used tools to know the earth's structure in the last decade. In this study, we used autocorrelation to determine the presence of underground mines by extracting the normal seismic response in transmission between the ground surface and the cavity roof. The experiments are carried out in the urban environment of the Mexico City western zone, where a high risk of mines collapse subsists. For this, we use ambient noise recorded for 30 min in vertical 4.5 Hz geophone arrays. We obtain zero offset sections of power spectra density from the stacking of autocorrelations in 4 s time windows. The results are compared with GPR, ERT, and seismic refraction studies. We observe that surface cavities such as drainpipe systems are present at frequencies greater than 30 Hz. Between 10 and 30 Hz, the seismic response is produced by resonances associated with cavities that can be delimited laterally by spectral maxima and whose presence agrees with discontinuities on radargrams. The mine roof depth is related to half-wavelength and the compression wave velocity of the surface layer determined by seismic refraction. The autocorrelation method does not determine the shape or vertical extent of the cavity, which is well resolved by the high resistivity values of the ERT method. However, low spectral amplitudes are observed on saturated materials where the electromagnetic wave is noisy and low resistivity values are resolved.
- 11 April 2021
- Published by Springer Nature in Natural Hazards
- Vol. 108 (1) , 129-145
Seismic ambient noise tomography to retrieve near-surface properties in soils with significant 3D lateral heterogeneity: the case of Quinta Colorada building in Chapultepec, Mexico
- 11 April 2021
- Published by Springer Nature in Natural Hazards
- Vol. 108 (1) , 129-145
Seismic ambient noise tomography to retrieve near-surface properties in soils with significant 3D lateral heterogeneity: the case of Quinta Colorada building in Chapultepec, Mexico
- 1 April 2021
- Published by Universidad Nacional Autonoma de Mexico in Ingeniería Investigación y Tecnología
- Vol. 22 (2) , 1-9
Ambient seismic noise tomography to build up a 3D shear-wave velocity model
To explore the usefulness of the ambient seismic noise tomography method for characterizing the subsoil surface structure, in this study, we apply this method to contribute to geotechnical decision-making in the construction of a school building. We used a rectangular array (36x56 m) of 48-4.5 Hz vertical geophones and produce surface wave tomographies from the travel times of Rayleigh waves extracted by cross-correlation of seismic noise. We determined a final 3D Vs model using 1D models derived from the inversion of dispersion curves obtained from the tomography maps for different frequencies. The 3D model shows an excellent resolution (vertical and lateral); we observe critical velocity contrasts in the range of 2 to 15 m deep. At depths higher than 15 m, the velocity has values close to 900 m/s; however, we observe a low-velocity anomaly associated with a lava tube or crack that seems to continue under an adjacent building.
- 1 April 2021
- Published by Universidad Nacional Autonoma de Mexico in Ingeniería Investigación y Tecnología
- Vol. 22 (2) , 1-9
Ambient seismic noise tomography to build up a 3D shear-wave velocity model
To explore the usefulness of the ambient seismic noise tomography method for characterizing the subsoil surface structure, in this study, we apply this method to contribute to geotechnical decision-making in the construction of a school building. We used a rectangular array (36x56 m) of 48-4.5 Hz vertical geophones and produce surface wave tomographies from the travel times of Rayleigh waves extracted by cross-correlation of seismic noise. We determined a final 3D Vs model using 1D models derived from the inversion of dispersion curves obtained from the tomography maps for different frequencies. The 3D model shows an excellent resolution (vertical and lateral); we observe critical velocity contrasts in the range of 2 to 15 m deep. At depths higher than 15 m, the velocity has values close to 900 m/s; however, we observe a low-velocity anomaly associated with a lava tube or crack that seems to continue under an adjacent building.
- Open Access
- 30 November 2020
- Published by Wiley in ESS Open Archive
GEOPHYSICAL SUBSOIL CHARACTERIZATION OF A HOUSING UNIT SHAKEN BY THE EARTHQUAKE OF SEPTEMBER 19, 2017 (MW 7.1)
September 19, 2017 earthquake considerably affected the southern area of Mexico City; specically, in the transition zone, some local subsidence problems were accentuated. This site is associated with a high geological hazard due to faults, cracks, subsidence, landslides, and collapses. The lesson learned from this earthquake showed that much remains to be known, and detailed characterization is needed to dene vulnerable sites that allow for reduction seismic-geological risk. This study used various geophysical methods to explore the subsoil of a housing unit south of Mexico City. The houses began having structural damage on the site, and the surface of the land presented cracks since the year 2012, problems that were magnied after the earthquake. We apply electrical tomography, seismic noise interferometry, and H/V methods. The results show the properties of the subsoil vary drastically both in the lateral direction and in-depth. In particular, it highlights the presence of a discontinuity that divides the area into two different structures. Our interpretations show that the observed damages are due to a series of conjugated events that accentuate differential subsidence: irregularity in subsoil structure and properties, local overexploitation of groundwater, and dynamic amplication effects that accelerate relative displacements during seismic motions.
- 30 November 2020
- Published by Wiley in ESS Open Archive
Open AccessGEOPHYSICAL SUBSOIL CHARACTERIZATION OF A HOUSING UNIT SHAKEN BY THE EARTHQUAKE OF SEPTEMBER 19, 2017 (MW 7.1)
September 19, 2017 earthquake considerably affected the southern area of Mexico City; specically, in the transition zone, some local subsidence problems were accentuated. This site is associated with a high geological hazard due to faults, cracks, subsidence, landslides, and collapses. The lesson learned from this earthquake showed that much remains to be known, and detailed characterization is needed to dene vulnerable sites that allow for reduction seismic-geological risk. This study used various geophysical methods to explore the subsoil of a housing unit south of Mexico City. The houses began having structural damage on the site, and the surface of the land presented cracks since the year 2012, problems that were magnied after the earthquake. We apply electrical tomography, seismic noise interferometry, and H/V methods. The results show the properties of the subsoil vary drastically both in the lateral direction and in-depth. In particular, it highlights the presence of a discontinuity that divides the area into two different structures. Our interpretations show that the observed damages are due to a series of conjugated events that accentuate differential subsidence: irregularity in subsoil structure and properties, local overexploitation of groundwater, and dynamic amplication effects that accelerate relative displacements during seismic motions.