JMJuan Carlos Martínez

Juan Carlos Martínez

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Juan Carlos Martínez has a total of 177 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Bile salts govern protein bioaccessibility and nanostructural assembly during digestion of Nori seaweed

    by Yubexi Correa, Vera Cebrián-Lloret, Patricia López-Sánchez, Juan Carlos Martínez, Amparo López-Rubio, Giovanni Fevola, Diego Alba Venero, Yi Zhang, Imke Greving, Silja Flenner, et al.


  • Open Access

    Wet Spinning of Tough Alginate/Nanomicrocellulose Fibers from Waterborne Bioinks

    by Ane Rivas-ZúñiGa, Juan Carlos MartínEz, Arantxa Eceiza, Borja FernánDez-D’ARlas

    Here, cellulose fibers, turned into nano/microcellulose (NMC), were combined with different ratios of alginate (Alg) to formulate a series of waterborne bioinks, which were subsequently processed via coagulation-based wet-spinning technique. Water was the sole solvent in both the bioink and coagulation bath. The resulting fibers exhibited tensile strength, elastic modulus, and strain at breaking point values on the order of 250 MPa, 5–8 GPa, and 15%, respectively, approaching those of commercial cellulosic fibers such as cotton, wool, and Lyocell. A maximum elastic modulus of ca. 8 GPa was achieved with 90% (w/v) of NMC. Nevertheless, the toughness appeared to decrease with the addition of the NMC. SAXS and WAXS studies showed that NMC is highly aligned with the fiber axis, causing an internal orientation of the fibers. This was supported by the micrographic analysis. These findings show that by combining Alg/NMC mechanically, robust biofibers can be fabricated by sustainable means. The range of properties of these fibers offers promising alternatives for applications in the textile and biomedical fields.

  • Open Access

    An atlas of microtubule lattice parameters regulated through ligand binding to the microtubule-stabilizing sites

    by Daniel Lucena-Agell, Óscar Fernández, Rebeca París-Ogáyar, Juan Estévez-Gallego, Denisa Ondrúšková, Beatriz Álvarez-Bernad, Francesca Bonato, Jaime Larraga, Diego Ortíz de Elguea, Gregorio Javier Cano, et al.

    Microtubules are dynamic cytoskeletal polymers whose lattice architecture regulates force generation, nucleotide hydrolysis, and recognition by motor proteins and microtubule-associated proteins (MAPs). Microtubule-stabilizing agents (MSAs), including taxanes and laulimalide/peloruside-site ligands, suppress depolymerization by binding to defined lattice sites, yet stabilization is not structurally neutral. How ligand chemistry reshapes lattice organization and function remains unresolved. Here, we address three mechanistic questions. First, do distinct ligand classes induce defined lattice states? Using X-ray fiber diffraction, we show that MSAs selectively stabilize two preferred longitudinal conformations, a compact state (~4.06 nm monomer rise) and an expanded state (~4.17 nm), while modulating lateral organization reflected in shifts in mean MT radius. These axial spacings cluster around discrete values across chemotypes, indicating stabilization of preexisting conformational minima rather than continuous distortion. Second, are these states interconvertible upon changes in ligand occupancy? Time-resolved diffraction reveals that longitudinal transitions occur within seconds of ligand addition even at substoichiometric occupancy, whereas, lateral equilibration proceeds slower, consistent with redistribution within heterogeneous protofilament organizations. Third, do such structural states alter nucleotide hydrolysis and motor/MAP behavior? Expanded lattices are associated with reduced apparent GTP hydrolysis rates under steady-state assembly conditions and altered kinesin motility, whereas compact lattices preferentially promote tau binding and distinct motor interaction profiles. Together, these findings establish longitudinal lattice conformation as a regulatory parameter and position MSAs as chemical tools that bias a dynamic structural landscape with predictable catalytic and transport consequences.


  • Open Access

    Multi-modal imaging of the loading heterogeneity in blended films of amorphous and semi-crystalline polymers during stretching

    by Christopher Garvey, Martin Kreuzer, Maria Stec, Graeme Moad, Peter Halley, Marianne Imperor, Stéphan Rouzière, Jennifer Bodin, Jan Ilavsky, Emigdio Chávez Angel, et al.

    Here we provide microscopic insight into the improved mechanical performance of biomass derived films of poly(lactic acid) (PLA) following melt blending with medium-density polyethylene (MDPE) and high-density polyethylene (HDPE). Laboratory based characterisations show that twin screw extrusion of the blend in the melt introduced elongated micron-scale phase-separated structures consisting of phase-separated semicrystalline PE with some degree of crystallographic orientation along the machine direction, and isotropic poorly ordered PLA. Characteristic regions of failure during uniaxial tensile deformation of films were identified using optical microscopy. The regions associated with failure. which appear as crazes and domains oriented orthogonally to the extension direction, are micron-scale in pure PLA but expand to millimetre-scale in the blended materials.. Polarised vibrational (infrared and Raman) microspectroscopy reveals specific molecular orientation of the PLA and PE chains in the failure regions. Spatially localised X-ray scattering provided information on electron density correlations from crystalline- (wide angle X-ray scattering, WAXS) and meso-scale domains (small angle X-ray scattering, SAXS) as well as orientational information on these domains. It was found from WAXS that the polymer chains in the brittle PLA films are not more ordered on the length-scale of chain packing following extension, but that ordered and oriented nm-scale domains are produced (fibrils). The phaseseparated PE structures are shown to play a role in the distribution of load in the blend during extension, inhibiting the formation of PLA fibrils. The synchrotron-based measurements reveal the differences in polymer organisation both in and away from the failure regions: the regions associated with failure show well-defined perturbations, whereas away from the failure the material does not display any resolvable perturbation from the bulk unstretched structure. These results indicate that the improved mechanical performance arises from a local redistribution of stresses in the brittle PLA by the PE phase in the craze region.

  • Open Access

    Multi-modal imaging of the loading heterogeneity in blended films of amorphous and semi-crystalline polymers during stretching

    by Christopher Garvey, Martin Kreuzer, Maria Stec, Graeme Moad, Peter Halley, Marianne Imperor, Stéphan Rouzière, Jennifer Bodin, Jan Ilavsky, Emigdio Chávez Angel, et al.

    Here we provide microscopic insight into the improved mechanical performance of biomass derived films of poly(lactic acid) (PLA) following melt blending with medium-density polyethylene (MDPE) and high-density polyethylene (HDPE). Laboratory based characterisations show that twin screw extrusion of the blend in the melt introduced elongated micron-scale phase-separated structures consisting of phase-separated semicrystalline PE with some degree of crystallographic orientation along the machine direction, and isotropic poorly ordered PLA. Characteristic regions of failure during uniaxial tensile deformation of films were identified using optical microscopy. The regions associated with failure. which appear as crazes and domains oriented orthogonally to the extension direction, are micron-scale in pure PLA but expand to millimetre-scale in the blended materials.. Polarised vibrational (infrared and Raman) microspectroscopy reveals specific molecular orientation of the PLA and PE chains in the failure regions. Spatially localised X-ray scattering provided information on electron density correlations from crystalline- (wide angle X-ray scattering, WAXS) and meso-scale domains (small angle X-ray scattering, SAXS) as well as orientational information on these domains. It was found from WAXS that the polymer chains in the brittle PLA films are not more ordered on the length-scale of chain packing following extension, but that ordered and oriented nm-scale domains are produced (fibrils). The phaseseparated PE structures are shown to play a role in the distribution of load in the blend during extension, inhibiting the formation of PLA fibrils. The synchrotron-based measurements reveal the differences in polymer organisation both in and away from the failure regions: the regions associated with failure show well-defined perturbations, whereas away from the failure the material does not display any resolvable perturbation from the bulk unstretched structure. These results indicate that the improved mechanical performance arises from a local redistribution of stresses in the brittle PLA by the PE phase in the craze region.

  • Open Access

    Nylon 7,10: An odd-even polyamide with a complex melting and a peculiar high temperature polymorphic form

    by Matteo Arioli, Lourdes Franco, Juan Carlos Martínez, Jordi Puiggalí


  • Open Access

    Investigating the impact of different dietary fibres on the gastrointestinal digestion of food proteins

    by Laura Díaz-Piñero, Yubexi Correa, Ana Casanova Navas, Juan Carlos Martínez, Isidra Recio, Marta Martínez-Sanz


  • Polymyxin B-Enriched Exogenous Lung Surfactant: Thermodynamics and Structure

    by Nina Královič-Kanjaková, Ali Asi Shirazi, Lukáš Hubčík, Mária Klacsová, Atoosa Keshavarzi, Juan Carlos Martínez, Sophie Combet, José Teixeira, Daniela Uhríková

    The use of an exogenous pulmonary surfactant (EPS) to deliver other relevant drugs to the lungs is a promising strategy for combined therapy. We evaluated the interaction of polymyxin B (PxB) with a clinically used EPS, the poractant alfa Curosurf (PSUR). The effect of PxB on the protein-free model system (MS) composed of four phospholipids (diC16:0PC/16:0-18:1PC/16:0-18:2PC/16:0-18:1PG) was examined in parallel to distinguish the specificity of the composition of PSUR. We used several experimental techniques (differential scanning calorimetry, small- and wide-angle X-ray scattering, small-angle neutron scattering, fluorescence spectroscopy, and electrophoretic light scattering) to characterize the binding of PxB to both EPS. Electrostatic interactions PxB-EPS are dominant. The results obtained support the concept of cationic PxB molecules lying on the surface of the PSUR bilayer, strengthening the multilamellar structure of PSUR as derived from SAXS and SANS. A protein-free MS mimics a natural EPS well but was found to be less resistant to penetration of PxB into the lipid bilayer. PxB does not affect the gel-to-fluid phase transition temperature, T-m, of PSUR, while T-m increased by similar to+ 2 degrees C in MS. The decrease of the thickness of the lipid bilayer (d(L)) of PSUR upon PxB binding is negligible. The hydrophobic tail of the PxB molecule does not penetrate the bilayer as derived from SANS data analysis and changes in lateral pressure monitored by excimer fluorescence at two depths of the hydrophobic region of the bilayer. Changes in d(L) of protein-free MS show a biphasic dependence on the adsorbed amount of PxB with a minimum close to the point of electroneutrality of the mixture. Our results do not discourage the concept of a combined treatment with PxB-enriched Curosurf. However, the amount of PxB must be carefully assessed (less than 5 wt % relative to the mass of the surfactant) to avoid inversion of the surface charge of the membrane.


  • Open Access

    Thermodynamic and Structural Study of Budesonide—Exogenous Lung Surfactant System

    by Atoosa Keshavarzi, Ali Asi Shirazi, Rastislav Korfanta, Nina Královič, Mária Klacsová, Juan Carlos Martínez, José Teixeira, Sophie Combet, Daniela Uhríková

    The clinical benefits of using exogenous pulmonary surfactant (EPS) as a carrier of budesonide (BUD), a non-halogenated corticosteroid with a broad anti-inflammatory effect, have been established. Using various experimental techniques (differential scanning calorimetry DSC, small- and wide- angle X-ray scattering SAXS/WAXS, small- angle neutron scattering SANS, fluorescence spectroscopy, dynamic light scattering DLS, and zeta potential), we investigated the effect of BUD on the thermodynamics and structure of the clinically used EPS, Curosurf®. We show that BUD facilitates the Curosurf® phase transition from the gel to the fluid state, resulting in a decrease in the temperature of the main phase transition (Tm) and enthalpy (ΔH). The morphology of the Curosurf® dispersion is maintained for BUD < 10 wt% of the Curosurf® mass; BUD slightly increases the repeat distance d of the fluid lamellar phase in multilamellar vesicles (MLVs) resulting from the thickening of the lipid bilayer. The bilayer thickening (~0.23 nm) was derived from SANS data. The presence of ~2 mmol/L of Ca2+ maintains the effect and structure of the MLVs. The changes in the lateral pressure of the Curosurf® bilayer revealed that the intercalated BUD between the acyl chains of the surfactant’s lipid molecules resides deeper in the hydrophobic region when its content exceeds ~6 wt%. Our studies support the concept of a combined therapy utilising budesonide—enriched Curosurf®.


  • Open Access

    Shear-Induced Structure Formation in MAH-g-PP Compatibilized Polypropylenes

    by Stan F. S. P. Looijmans, Dario Cavallo, Daniel Hermida Merino, Juan Carlos Martinez, Patrick D. Anderson, Lambèrt C. A. van Breemen