EHEva Hernández-García

Eva Hernández-García

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Eva Hernández-García has a total of 30 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Development of Antioxidant Composites Based on Reprocessed PLA Reinforced with Bacterial Cellulose Obtained from Kombucha Fermentation in an Infusion of Cauliflower Stems

    by Daniela A. Cerro, Pedro Pacios, Ángel Agüero Rodríguez, Eva Hernández-García, Marina P. Arrieta

    In this study, cauliflower stems were used as an infusion medium for kombucha fermentation to produce kombucha bacterial cellulose (KBC). The obtained KBC was incorporated into reprocessed poly(lactic acid) (rPLA) films as a reinforcing filler. Cauliflower stem powder (CS) was also evaluated for comparison. Films containing 1 and 3 wt.% of each filler were characterized in terms of their mechanical, thermal, physicochemical, and morphological properties, surface wettability, water vapor barrier properties, antioxidant activity using a fatty food simulant, and disintegration under laboratory-scale composting conditions. The results showed that both fillers reduced the mechanical strength of the films without significantly affecting their thermal transitions, chemical structure, or surface wettability. rPLA-KBC-reinforced films exhibited the best overall performance for the intended use, with lower reductions in mechanical and barrier properties and providing antioxidant activity to rPLA-based systems, reaching radical scavenging activities of approximately 15% and 26% for films containing 1 and 3 wt.% of KBC, respectively. In addition, all formulations completely disintegrated under composting conditions within approximately 21 days. These findings demonstrate the potential of combining agricultural and industrial waste to develop sustainable antioxidant rPLA-based materials for food packaging applications.

  • Open Access

    Industrial applicability of compatibilized biopolyester blends for compostable food packaging: An integrated study on processing, performance, and end-of-life

    by Kerly Samaniego-Aguilar, Estefanía Sánchez-Safont, Ignacio Pisa Ripoll, Eva Hernández-García, Sergio Torres-Giner, José María Lagarón, José Gámez-Pérez, Luis Cabedo

    Enabling a gradual substitution of conventional plastics with compostable alternatives requires for biodegradable materials that simultaneously offer adequate processability, in-service performance, food-contact safety and an end-of-life compatible with organic matter. In this work, the industrial viability of a poly(3-hydroxybutyrate-co-3-hydroxyvalerate)/poly(butylene succinate-co-adipate) (PHBV/PBSA, 85/15 wt%) blend compatibilized with maleic anhydride-grafted PBSA (PBSA-g-MAH) was assessed across the full packaging value chain. Compatibilization widened the thermoforming processing window, increasing the tolerance to temperature fluctuations during forming thus improving its processability. Overall migration proved to be dependent on both the polymer nature and the food simulant: the blends complied with EU Regulation No. 10/2011 in the aqueous, acidic and fatty simulants, exceeding the 10 mg/dm² limit only in the high ethanol content simulant, so that their use is restricted to non-highly alcoholic foodstuffs. Their performance as packaging materials was evaluated by using the thermoformed trays of the studied samples containing minced-beef and stored at 5 °C and 48 R.H. for 12 days. The PHBV-based materials outperformed a polypropylene control, delaying lipid oxidation, colour deterioration, pH rise and microbial growth, while the compatibilized blend consistently improved on its non-compatibilized counterpart. Finally, industrial compostability was analysed according to the ISO 17088 standard: both blends, compatibilized and uncompatibilized, reached >90% ultimate aerobic biodegradation and full disintegration well within the timeframes established by the standard, and the resulting compost exerted no ecotoxic effects on higher plants, earthworms or nitrifying microorganisms. These results confirm the suitability of compatibilized PHBV/PBSA blends for safe, high-performance and fully compostable food packaging

  • Open Access

    Seaweed Biomass as a Sustainable Raw Material for Food Packaging: A Review on Biomolecules, Properties, Applications, Limitations and Future Perspectives

    by Evmorfia Athanasopoulou, Tiago L. C. T. Barroso, Eva Hernández-García

    Due to the environmental concerns associated with petroleum-based plastics, industry and academia have directed increasing attention toward marine-derived biodegradable biopolymers, particularly those obtained from seaweed. In line with global efforts to enhance resource efficiency and sustainability by introducing non-fossil raw materials into the circular economy, seaweed valorization has emerged as a promising pathway. Seaweeds are attractive feedstocks due to their biodegradability, non-toxicity, antioxidant activity, and excellent film-forming capacity. This review provides a critical and application-oriented overview of seaweed biomass for food packaging applications by comparatively discussing the relationship between seaweed composition, extraction technologies, material functionality, packaging performance, and regulatory considerations. Emphasis is placed on the role of structural biopolymers and bioactive compounds in the development of passive, active, and intelligent packaging systems. Recent advances in extraction technologies, polymer modification strategies, and incorporation of functional additives are critically discussed in relation to their influence on the physicochemical, mechanical, barrier, antioxidant, and antimicrobial properties of seaweed-based composites. Furthermore, the review highlights key challenges limiting industrial implementation, including high hydrophilicity, high variability between the batches, energy-intensive drying processes, regulatory compliance, migration safety, and long-term material stability. Overall, seaweed-derived materials demonstrate strong potential as sustainable alternatives to conventional packaging systems, particularly in food applications. However, further optimization of processing technologies, material standardization, techno-economic feasibility, and end-of-life management are still required before large-scale commercialization can be achieved.


  • Open Access

    Synthesis and characterization of copolyamide 1010/410 with varying putrescine contents for meat packaging applications

    by Marta Pacheco-Romeralo, Eva Hernández-García, Antxon Martínez de Ilarduya, Ronak Janani, Christopher Sammon, Sergio Torres-Giner

    A bioeconomy approach to produce green nylons (PA1010/410) via polycondensation reaction using renewable monomers. The resulting films showed excellent properties for food packaging and meat preservation, compared with conventional petrochemical-based materials.


  • Open Access

    Development and Characterization of Thermoformed Bilayer Trays of Paper and Renewable Succinic Acid Derived Biopolyester Blends and Their Application to Preserve Fresh Pasta

    by Eva Hernández-García, Marta Pacheco-Romeralo, Pedro Zomeño, Gianluca Viscusi, Francesca Malvano, Giuliana Gorrasi, Sergio Torres-Giner

    The present study reports on the development by thermoforming of highly sustainable trays based on a bilayer structure composed of paper substrate and a film made of a blend of partially bio-based poly(butylene succinate) (PBS) and poly(butylene succinate-co-adipate) (PBSA). The incorporation of the renewable succinic acid derived biopolyester blend film slightly improved the thermal resistance and tensile strength of paper, whereas its flexural ductility and puncture resistance were notably enhanced. Furthermore, in terms of barrier properties, the incorporation of this biopolymer blend film reduced the water and aroma vapor permeances of paper by two orders of magnitude, while it endowed the paper structure with intermediate oxygen barrier properties. The resultant thermoformed bilayer trays were, thereafter, originally applied to preserve non-thermally treated Italian artisanal fresh pasta, “fusilli calabresi” type, which was stored under refrigeration conditions for 3 weeks. Shelf-life evaluation showed that the application of the PBS–PBSA film on the paper substrate delayed color changes and mold growth for 1 week, as well as reduced drying of fresh pasta, resulting in acceptable physicochemical quality parameters within 9 days of storage. Lastly, overall migration studies performed with two food simulants demonstrated that the newly developed paper/PBS–PBSA trays are safe since these successfully comply with current legislation on plastic materials and articles intended to come into contact with food.


  • Open Access

    Lid Films of Poly(3-hydroxybutyrate-co-3-hydroxyvalerate)/Microfibrillated Cellulose Composites for Fatty Food Preservation

    by Eva Hernández-García, Amparo Chiralt, Maria Vargas, Sergio Torres-Giner

    The present work evaluates the food packaging performance of previously developed films of poly(3-hydroxybutyrate-co-3-hydroxyvalerate) (PHBV) reinforced with atomized microfibrillated cellulose (MFC) compatibilized by a reactive melt-mixing process. To this end, the novel green composite films were originally applied herein as lids in aluminum trays to preserve two dissimilar types of fatty foods, namely minced pork meat and sunflower oil. Results indicated that the PHBV/MFC films effectively preserved the physicochemical and microbiological quality of pork meat for one week of storage at 5 °C. In particular, the compatibilized green composite lid film yielded the lowest weight loss and highest oxidative stability, showing values of 0.935% and 0.78 malonaldehyde (MDA)/kg. Moreover, none of the packaged meat samples exceeded the acceptable Total Aerobial Count (TAC) level of 5 logs colony-forming units (CFU)/g due to the improved barrier properties of the lids. Furthermore, the green composite films successfully prevented sunflower oil oxidation in accelerated oxidative storage conditions for 21 days. Similarly, the compatibilized PHBV/MFC lid film led to the lowest peroxide value (PV) and conjugated diene and triene contents, with respective values of 19.5 meq O2/kg and 2.50 and 1.44 g/100 mL. Finally, the migration of the newly developed PHBV-based films was assessed using two food simulants, proving to be safe since their overall migration levels were in the 1–3 mg/dm2 range and, thus, below the maximum level established by legislation.


  • Open Access

    Multilayer Sheets Based on Double Coatings of Poly(3-hydroxybutyrate-co-3-hydroxyvalerate) on Paper Substrate for Sustainable Food Packaging Applications

    by Eva Hernández-García, Pedro A. V. Freitas, Pedro Zomeño, Chelo González-Martínez, Sergio Torres-Giner

    This work reports on the development and performance evaluation of newly developed paper sheets coated, on both sides, with thin films of biodegradable poly(3-hydroxybutyrate-co-3-hydroxyvalerate) (PHBV) for applications of food packaging. For this, PHBV/paper/PHBV multilayers were first prepared by the thermo-sealing technique, optimizing the process variables of temperature and time. Thereafter, the multilayer sheets were characterized in terms of their morphological, optical, thermal, mechanical, and barrier properties and compared with equivalent paper structures double coated with high-barrier multilayer films of petrochemical polymers. The results indicated that the double coatings of PHBV successfully improved the mechanical resistance and ductility, protected from moisture, and also reduced the aroma and oxygen permeances of paper, having a minimal effect on its optical and thermal properties. Finally, the compostability of the resultant multilayer sheets was analyzed, confirming that the presence of the PHBV coatings slightly delayed the aerobic biodegradation and disintegration of paper.


  • Open Access

    Active Starch-Polyester Bilayer Films with Surface-Incorporated Ferulic Acid

    by Eva Hernández-García, Maria Vargas, Amparo Chiralt

    Bilayer films of cassava starch-based (with 10% gellan gum) and polylactic (PLA): Poly(3-hydroxybutyrate-co-3-hydroxyvalerate) (PHBV) polyester blend (with 75% PLA) monolayers were obtained by melt-blending and compression-molding, and the subsequent thermocompressing of both monolayers. Ferulic acid (FA) was incorporated into the polyester sheet by spraying and drying. Films were characterized in terms of their microstructure and functional properties throughout two months of storage at 25 °C and 53% relative humidity. The laminates exhibited improved tensile and barrier properties compared to the respective monolayers, which makes them more adequate for food packaging purposes. Surface incorporation of ferulic acid did not significantly modify the barrier and mechanical properties of the films while providing them with antioxidant and antibacterial capacity when applied in aqueous systems, where a complete release of active compounds occurred. The physical properties of the bilayers and layer thermo-sealing were stable throughout storage. Likewise, the antioxidant and antimicrobial active properties were preserved throughout storage. Therefore, these active bilayers represent a sustainable packaging alternative to non-biodegradable, non-recyclable synthetic laminates for food packaging purposes, which could extend the shelf-life of food due to their antioxidant and antibacterial properties.