VTViktoriia Tolstykh

Viktoriia Tolstykh

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Viktoriia Tolstykh has a total of 11 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Determining the effect of whole-grain flour on dough properties and the quality of hard dough biscuits

    by Hanna Korkach, Olga Makarova, Olena Kotuzaki, Viktoriia Tolstykh, Vladyslav Ivanov

    The object of the study is the properties of wheat flour, the formation of structural and mechanical characteristics of the dough, and the quality of hard dough biscuits. Flour confectionery products based on refined wheat flour are characterized by high energy value but contain lower amount of biologically active substances, dietary fiber, and essential micronutrients. A promising direction for addressing this problem is the development of technology for hard dough biscuits made with whole grain flour. As a result of this study, a comparative analysis of the quality parameters of these types of flour was carried out. It was established that whole grain flour is characterized by higher acidity, ash content, and water-binding capacity, as well as a larger particle size, but lower content and hydration capacity of raw gluten compared to refined wheat flour. An increase in moisture content (from 5.55 to 6.2%), density (from 450.5 to 603.5 kg/m3), and hardness (from 0.02 to 0.025 kg/mm2) of the test sample was noted compared to the control sample. At the same time, a slight decrease in alkalinity and a reduction in swelling capacity (from 172.5 to 156.0%) were observed. The geometric dimensions of biscuits indicate that the products retained their shape stability after completely replacing refined wheat flour with whole grain flour. The obtained results confirm the technological feasibility of using millstone-ground whole grain flour in the technology of hard dough biscuits. Implementation of the results of the study into production will make it possible to expand the range of flour-based products and manufacture competitive products directed toward the modern concept of healthy nutrition and the rational use of grain raw materials

  • IMPROVING THE COMPOSITION OF FORMED POTATO CHIPS WITH FUNCTIONAL PLANT ADDITIVES

    by V. Tolstykh, O. Makarova, H. Korkach, L. Gordiienko

    The modern food concentrate industry in Ukraine is undergoing active transformation driven by changes in consumers’ dietary habits and the growing demand for convenience foods that combine ease of consumption, a variety of flavors, and high nutritional value. The global trend toward healthy eating encourages manufacturers to develop functional products enriched with protein, vitamins, and dietary fiber while simultaneously reducing caloric content. Therefore, an essential condition for the production of highly competitive snack products is the improvement of their quality characteristics, nutritional and biological value, sensory properties and safety. Traditional potato chips are characterized by high energy value, as they contain up to 30-40% fat. In addition, deep-frying leads to the formation of lipid oxidation products and other undesirable compounds. This study presents a technological approach to improving the composition of formed potato chips by incorporating dietary fiber sources, namely psyllium (Plantago ovata seed husk) and a fiber mixture derived from milk thistle, pumpkin and flax seeds, as well as by replacing deep-fat frying with high-temperature baking as the dehydration method. Psyllium, which contains up to 86% dietary fiber, acts not only as a nutritional fortifier but also as an effective hydrocolloid and structure-forming agent. It was established that the addition of 3% psyllium or 5% of the fiber mixture, based on the weight of dry potato puree, is the most rational for forming a plastic, more cohesive mass suitable for shaping into flakes. Structural-mechanical studies confirmed the strengthening of the biopolymer framework of the potato dough: the ultimate shear stress in samples with additives increases by 1.1–1.24 times compared to the control sample. The optimal thermal processing conditions were experimentally substantiated: baking at 170-180 °C for 14-15 minutes allows the final moisture content of the chips to be reduced to 2.2-2.5% while providing a crispy porous structure with an attractive golden color. The use of psyllium increases the dietary fiber content by 58%, while the fiber mixture increases it by 41.6% compared with the control sample. The absence of aggressive hot fat during baking promotes better preservation of the structure of psyllium and fiber components, confirming their potential for use in dietary nutrition.

  • Open Access

    Prospects and experience of using alternative types of plant raw materials in the production of pasta

    by O. Makarova, V. Tolstykh, L. Gordiienko, A. Chaban, Y. Karabuza

    The paper substantiates the relevance and analyzes the experience of scientists in using alternative plant raw materials in the production of pasta products; considers the main aspects and challenges which the efforts of scientists and manufacturers of pasta equipment are directed towards overcoming; summarizes information on innovative measures and technological solutions aimed at ensuring the necessary structural and mechanical properties of semi-finished products and improving the quality of products, particularly, special-purpose ones. Market analysis and global trends in pasta products indicate a projected increase in its production volumes and a change in consumer priorities. The change in consumer preferences is facilitated by the promotion of a healthy lifestyle, increased awareness of the importance and principles of healthy nutrition, etc. The demand and regularity of pasta consumption determines the importance of adjusting its nutritional profile, as it is mainly made from high-grade wheat flour, which is deficient in nutrients. Expanding the raw material base of pasta production by using alternative types of plant ingredients will allow to solve this problem and expand the range of pasta products taking into account the requests and dietary restrictions of consumers. Such types of raw materials include cereal flour, particularly, whole grain and gluten-free; legume flour, which does not contain gluten and is a source of valuable protein; products of vegetable and fruit processing, spices – natural dyes and carriers of valuable nutrients; secondary products of processing the specified raw materials, using which also contributes to waste valorization and resource conservation. But its use at pasta production enterprises is complicated by the technological properties of this raw material, which are different from those of wheat flour. This causes a change in the elastic properties of semi-finished products, texture and strength of the final product, and requires determining the optimal mass fraction of alternative raw materials and/or adjusting the technological process to level its negative impact and maintain good product quality. However, enriching the pasta with physiologically functional ingredients and manufacturing special-purpose products due to the developed innovative measures contributes to the expansion of the product range for a wide range of consumers.

  • Open Access

    Encapsulation of probiotic bacteria in pectin and pectin-chitosan matrices for use in confectionery products

    by H. Korkach, O. Kotuzaki, O. Makarova, V. Tolstykh

    Probiotics are live bacteria that benefit the host's health when administered in adequate quantities. However, their use may be limited due to a decrease in cell viability during production, product storage, and subsequent passage through the gastrointestinal tract. This work theoretically substantiates the use of a combined method of microcapsule formation – immobilization of probiotics into a gel and microencapsulation, which will protect microorganisms from the effects of technological and physiological factors, regulate their targeted delivery and controlled release from microcapsules at the site of deployment. Suitable carriers for coating the capsules were selected, which is crucial for ensuring adequate protection of probiotics since their properties determine the effectiveness of protecting microorganisms from harmful environmental factors and the ability to release them in the lower gastrointestinal tract. In the course of the research, microcapsules with pectin and pectin-chitosan matrices containing bifidobacteria Bifidobacterium bifidum-1 and lactobacilli Lactobacillus acidophilus Ep-317/402 were developed. The possibilities and feasibility of using the developed microcapsules with different matrices to protect cells from adverse gastrointestinal tract conditions in vitro were substantiated. The results showed that the survival rate of microencapsulated bifidobacteria in the gastric juice medium was 87 % in both matrices, in bile – in pectin 82 %, and pectin-chitosan 92 %. Survival of lactobacilli: in gastric juice – 89 % in the pectin matrix, 93 % in the pectin-chitosan matrix, in bile – 94 and 88 %, respectively. The obtained pectin and pectin-chitosan microcapsules can potentially be used as a means of delivering viable probiotic microorganisms to their location – the human large intestine and can be used in confectionery technology as ingredients to provide. Пробіотики – живі бактерії, що при введенні в адекватних кількостях корисні для здоров’я господаря. Однак їх використання може бути обмеженим через зниження життєздатності клітин під час виробництва, зберігання у виробах і в подальшому під час проходження через шлунково-кишковий тракт. У роботі теоретично обґрунтувано використання комбінованого методу формування мікрокапсул – імобілізацію пробіотиків в гель і мікрокапсулювання, що дозволить захистити мікроорганізми від впливу технологічних і фізіологічних факторів, регулювати їх цілеспрямовану доставку і контрольоване вивільнення з мікрокапсул у місці дислокації. Підібрані відповідні носії для покриття капсул, що має вирішальне значення для забезпечення ефективного захисту пробіотиків, тому що від їх властивостей залежить ефективність захисту мікроорганізмів від негативних факторів довкілля, а також здатність до вивільнення в нижніх відділах шлунково-кишкового тракту. При проведенні досліджень розроблені мікрокапсули з пектиновою та пектин-хітозановою матрицями, що містять біфідобактерії Bifidobacterium bifidum-1 та лактобактерії Lactobacillus acidophilus Ep-317/402. Обґрунтовано можливості та доцільність використання розроблених мікрокапсул із різними матрицями для захисту клітин від несприятливих умов шлунково-кишкового тракту in vitro. Результати показали, що в середовищі шлункового соку виживаність мікрокапсульованих біфідобактерій склала 87 % в обох видах матриць, у жовчі – в пектиновій 82 %, у пектин-хітозановій – 92 %. Виживаність лактобактерій: у шлунковому соці – в пектиновій матриці 89 %, в пектин-хітозановій матриці 93 %; у жовчі – 94 і 88 % відповідно. Одержані пектинові та пектин-хітозанові мікрокапсули потенційно можуть використовуватись як засіб доставки життєздатних пробіотичних мікроорганізмів у місця їх дислокації – товстий кишечник людини, та використовуватись в технології кондитерського виробництва як інгредієнти для надання функціональної спрямованості виробам.

  • APPLICATION OF PROCESSING PRODUCTS OF VEGETABLE RAW MATERIAL IN MARSHMALLOW PRODUCTION

    by L Gordiienko, V Tolstykh, S Pavlovsky

    The article examines the main trends in obtaining new types of confectionery products with a balanced composition and functional properties, the production of which is based on the use of a product of plant raw materials processing - carob. Studies on increasing the nutritional value and reducing the energy intensity of marshmallow-type whipped products with the use of carob and the sugar substitute isomalt are given. Information on the functional properties of carob, the effect of the roasting process on its quality indicators, and the possibility of using carob in the production of confectionery products to expand the range of raw ingredients and increase their nutritional value were considered. A comparative description of the nutritional and energy value of medium-roasted carob and cocoa powder is given. The article examines the influence of the product of the processing of plant raw materials of carob on the nature of the formation of the structure of marshmallow masses of reduced energy content, and their main structural-mechanical, physico-chemical and organoleptic indicators are determined. Based on the determination of the structural and mechanical properties of marshmallow masses, such as critical shear stress, degree of general deformation and density of the mass, it is proposed to reduce the duration of their whipping by increasing the rate of structure formation of the mass when using carob powder, so the complete replacement of cocoa powder with carob leads to an increase critical shear stress by 51.83 Pa and an increase in mass density by 171 kg/m3 compared to the control sample. As a result of a complex of conducted studies of physico-chemical and organoleptic quality indicators, the expediency of using the product of the processing of plant raw materials of carob in reduced-energy marshmallow products with 75% isomalt has been proven, it is recommended to completely replace cocoa powder with carob at the stage of whipping the mass. The calculated nutritional and energy value of the new marshmallow products showed a decrease in the total content of fats and carbohydrates in the developed products, an increase in the content of vegetable dietary fibers by 28% and a decrease in the energy value by 55.65 kcal. Enrichment of marshmallow products with minerals, in particular calcium, sodium and vitamins B6 and E, was noted.

  • THE EFFECT OF PLANT PROTEINS ON THE FORMATION OF STRUCTURAL AND RHEOLOGICAL PROPERTIES OF NOUGAT

    by L. Gordiienko, V. Tolstykh, K Avetisian

    This paper considers the problem of increasing the nutritional value of whipped confectionery such as nougat by using hemp- based and soya-based protein-containing ingredients. The main tendencies of obtaining new types of food based on plant proteins with complete amino acid composition are described. The paper presents information on cultivating and using hemp and soya both in Ukraine and in the world, and suggests how products of their processing can be applied to improve the quality and increase the biological value of confectionery. It has been investigated what effect protein-containing ingredients obtained from hemp and soya have on the structural properties of foam in the technology of whipped confectionery such as nougat. It has been established that increasing the amount of plant protein additives leads to a decrease in the foaming ability, but the stability of protein foams increases. Adding 10% of protein-containing hemp additives increases the foam stability by 6%, while protein-containing soya additives increase it by 5%. The paper presents the results of studying the structural and rheological properties of nougat mass with protein-containing plant additives in the amount 2.5–10% of the weight of sugar. It has been determined that adding protein-containing hemp and soya ingredients increases the viscosity and plastic strength of the products and stabilises their structure. The effect of different amounts of nuts on the kinetics of nougat crystallisation has been studied. It is recommended to add 5% of hemp and 7.5% of soya protein-containing additives instead of sugar during the whipping of nougat mass, because it reduces the whipping time and has a positive effect on structure formation. The recommended amount of roasted pistachio kernels in the samples suggested is 25–35% of the total weight of nougat, with the resting time 30–60 minutes and the moulding temperature 50–55°C. The nutritional value of the new products with protein-containing hemp and soya ingredients and nuts has been calculated. It has been noted that nougat has been enriched with protein, unsaturated fatty acids, and minerals (potassium, calcium, magnesium, phosphorus).


  • Open Access

    Research of the process of foaming of marshmallow mass with synbiotic

    by H. Korkach, O. Kotuzaki, V. Tolstykh, H. Shunko

    Considering that today intestinal dysbiosis to some extent affects about 90 % of the population of Ukraine, it is advisable to develop confectionery products with functional ingredients that can affect the microflora and are used to restore the disturbed balance of intestinal ecostructure. Such ingredients include synbiotics. This paper substantiates the need to develop recipes for confectioneries, including marshmallows, to create new types of pastilles with functional properties. Marshmallow production includes the usage of egg whites in fresh, frozen, or dried form as a foaming agent. In recent years, companies use dry egg whites, which have a number of advantages: increasing the sanitary level of production, reducing production area, improving safety and quality stability of finished products that included it in the formula. The functional and technological properties of dry egg whites have been studied regarding the possibility of obtaining pastille products with high-quality stable foam structure. It has been experimentally established that dry protein should be reduced at 30…40 °C and the optimal foaming ability of the protein is at 40…45 °C. The regularities of the foaming process in confectionery masses with a synbiotic have been determined. It has been found that the marshmallow mass with microencapsulated bifidobacteria and lactulose (5; 7.5; and 10 %) requires 6, 5 and 4 minutes of whisking at 400 rpm to form foam, respectively, whereas the control sample required 8 minutes. The dependence of quality indicators of marshmallow masses (density and air volume concentration) on the foaming temperature has been studied. It has been established that the production of marshmallow mass with a synbiotic of a certain density occurs at 38 °C and the study of air volume concentration confirms that the maximum temperature allowing to produce a high-quality mass is 40 °C. Thus, the whisking temperature required to obtain high-quality and stable foam has been experimentally determined for the marshmallow mass. This research allows us to state with confidence that introducing a synbiotic complex into the structure of a marshmallow mass improves the foaming process which allows to produce high-quality products with soft texture and stable foam structure.