Tien-Hao Liao
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Previous Organizations / Institutes
The organizations / institutes from the scholar's other articles in the past ten years
Research Subjects
Tien-Hao Liao has a total of 38 co-authors. Here are the top co-authors by number of shared publications:
- Leung Tsang
Radiation Laboratory, Department of Electrical Engineering and Computer Science, University of Michigan, Ann Arbor, MI 48109, USA
5 shared publications Kung-Hau Ding
Air Force Res Lab, Wright Patterson AFB, OH USA
4 shared publications- Marc Simard
Jet Propulsion Laboratory California Institute of Technology Pasadena CA USA
4 shared publications Leung Tsang
University of Michigan
3 shared publications- Michael Denbina
Jet Propulsion Laboratory California Institute of Technology Pasadena CA USA
3 shared publications - Seung-Bum Kim
Jet Propulsion Laboratory, California Institute of Technology, Pasadena, CA, USA
3 shared publications
Latest Publications
- Open Access
- 19 November 2022
- Published by MDPI AG in Remote Sensing
- Vol. 14 (22) , 5875
Dual-Frequency Retrieval of Soil Moisture from L- and S-Band Radar Data for Corn and Soybean
Radar backscattering responds differently to soil moisture due to vegetation effects depending on the microwave frequency. The retrieval of soil moisture using a single frequency has been common. In this paper, we study how soil moisture retrieval performs using dual-frequency radar backscattering (L- and S-bands) compared with using L-band only. The dual-frequency inputs increase the amount of independent information, which is expected to reduce the uncertainty in estimating soil moisture. Forward scattering models for corn and soybean fields were previously generated and validated with the L-band for the SMAPVEX12 campaign: they are inverted as an independent test for the retrieval of soil moisture using the SMEX02 campaign data in this paper. It is demonstrated that L-band modeling of forward scattering processes is scalable at the S-band, in that the physics and parameters behind modeling the vegetation effects remain the same between L- and S-bands. Either L- or S-band single-frequency retrieval has reliable performance for soil moisture retrieval. Furthermore, averaging the retrieved soil moisture from both frequencies further improves the retrieval performance. The averaging avoids the determination of the weights of the L- and S-band sigma0 during the cost function minimization. The dual frequency retrieval is evaluated with the unbiased RMSE of 0.031 and 0.057 m3/m3 for corn and soybean, respectively, which are improvements by up to 0.010 and 0.004 m3/m3, compared with single-frequency cases. The findings here can apply to the upcoming NISAR mission featuring L- and S-bands.
- 19 November 2022
- Published by MDPI AG in Remote Sensing
- Vol. 14 (22) , 5875
Open AccessDual-Frequency Retrieval of Soil Moisture from L- and S-Band Radar Data for Corn and Soybean
Radar backscattering responds differently to soil moisture due to vegetation effects depending on the microwave frequency. The retrieval of soil moisture using a single frequency has been common. In this paper, we study how soil moisture retrieval performs using dual-frequency radar backscattering (L- and S-bands) compared with using L-band only. The dual-frequency inputs increase the amount of independent information, which is expected to reduce the uncertainty in estimating soil moisture. Forward scattering models for corn and soybean fields were previously generated and validated with the L-band for the SMAPVEX12 campaign: they are inverted as an independent test for the retrieval of soil moisture using the SMEX02 campaign data in this paper. It is demonstrated that L-band modeling of forward scattering processes is scalable at the S-band, in that the physics and parameters behind modeling the vegetation effects remain the same between L- and S-bands. Either L- or S-band single-frequency retrieval has reliable performance for soil moisture retrieval. Furthermore, averaging the retrieved soil moisture from both frequencies further improves the retrieval performance. The averaging avoids the determination of the weights of the L- and S-band sigma0 during the cost function minimization. The dual frequency retrieval is evaluated with the unbiased RMSE of 0.031 and 0.057 m3/m3 for corn and soybean, respectively, which are improvements by up to 0.010 and 0.004 m3/m3, compared with single-frequency cases. The findings here can apply to the upcoming NISAR mission featuring L- and S-bands.
- 6 July 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Geoscience and Remote Sensing Letters
- Vol. 19 (1545598X) , 1-5
Radar Backscattering of Rough Soil Surfaces From L-Band to Ku-Band With NMM3D
Backscattering from rough soil surface has important applications to the remote sensing of soil moisture and snow water equivalent (SWE). To extend simulations to Ku-band, we have performed full-wave simulations up to kh = 15 . Results are simulated for various profiles and show that the scattering at C-, X-, and Ku-bands is influenced by both scales of centimeters roughness and millimeter roughness. Comparisons are made between constant ratios rough surface and constant ratios rough surfaces and limited correlation length rough surfaces. The results are illustrated for both VV and HH polarizations. Simulation results are in good agreement with X-band measurement data as a function of incidence angle. An illustration is used to show how the results can be used for theoretical models of rough-surface scattering in remote sensing of SWE.
- 6 July 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Geoscience and Remote Sensing Letters
- Vol. 19 (1545598X) , 1-5
Radar Backscattering of Rough Soil Surfaces From L-Band to Ku-Band With NMM3D
Backscattering from rough soil surface has important applications to the remote sensing of soil moisture and snow water equivalent (SWE). To extend simulations to Ku-band, we have performed full-wave simulations up to kh = 15 . Results are simulated for various profiles and show that the scattering at C-, X-, and Ku-bands is influenced by both scales of centimeters roughness and millimeter roughness. Comparisons are made between constant ratios rough surface and constant ratios rough surfaces and limited correlation length rough surfaces. The results are illustrated for both VV and HH polarizations. Simulation results are in good agreement with X-band measurement data as a function of incidence angle. An illustration is used to show how the results can be used for theoretical models of rough-surface scattering in remote sensing of SWE.
- Open Access
- 22 March 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE) in TechRxiv
Characterizing Near-Nadir Ka-Band SAR Backscatter from Wet Surfaces and Diverse Land Covers
The forthcoming Surface Water and Ocean Topography (SWOT) satellite and AirSWOT airborne instrument are the first imaging radar-altimeters designed with near-nadir, 35.75 GHz Ka-band InSAR for mapping terrestrial water storage variability. Remotely sensed surface water extents are crucial for assessing such variability, but are confounded by emergent and inundated vegetation along shorelines. However, because SWOT-like measurements are novel, there remains some uncertainty in the ability to detect certain land and water classes. We study the likelihood of misclassification between 15 land cover types and develop the Ka-band Phenomenology Scattering (KaPS) scattering model to simulate changes to radar backscatter as a result of changing surface water fraction and roughness. Using a separability metric, we find that water is five times more distinct compared with dry land classes, but has the potential to be confused with littoral zone and wet soil cover types. The KaPS scattering model simulates AirSWOT backscatter for incidence angles 1-27°, identifying the conditions under which open water is likely to be confused with littoral zone and wet soil cover types. A comparison of KaPS simulated backscatter with AirSWOT observed backscatter shows good overall agreement across the 15 classes (median r2=0.76). KaPS characterization of the sensitivity of near-nadir, Ka-band SAR to small changes in both wet area fraction and surface roughness enables more nuanced classification of inundation area. These results provide additional confidence in the ability of SWOT to classify water inundation extent, and open the door for novel hydrological and ecological applications of future Ka-band SAR missions.
- 22 March 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE) in TechRxiv
Open AccessCharacterizing Near-Nadir Ka-Band SAR Backscatter from Wet Surfaces and Diverse Land Covers
The forthcoming Surface Water and Ocean Topography (SWOT) satellite and AirSWOT airborne instrument are the first imaging radar-altimeters designed with near-nadir, 35.75 GHz Ka-band InSAR for mapping terrestrial water storage variability. Remotely sensed surface water extents are crucial for assessing such variability, but are confounded by emergent and inundated vegetation along shorelines. However, because SWOT-like measurements are novel, there remains some uncertainty in the ability to detect certain land and water classes. We study the likelihood of misclassification between 15 land cover types and develop the Ka-band Phenomenology Scattering (KaPS) scattering model to simulate changes to radar backscatter as a result of changing surface water fraction and roughness. Using a separability metric, we find that water is five times more distinct compared with dry land classes, but has the potential to be confused with littoral zone and wet soil cover types. The KaPS scattering model simulates AirSWOT backscatter for incidence angles 1-27°, identifying the conditions under which open water is likely to be confused with littoral zone and wet soil cover types. A comparison of KaPS simulated backscatter with AirSWOT observed backscatter shows good overall agreement across the 15 classes (median r2=0.76). KaPS characterization of the sensitivity of near-nadir, Ka-band SAR to small changes in both wet area fraction and surface roughness enables more nuanced classification of inundation area. These results provide additional confidence in the ability of SWOT to classify water inundation extent, and open the door for novel hydrological and ecological applications of future Ka-band SAR missions.
- 30 September 2021
- Published by Optica Publishing Group in Journal of the Optical Society of America B
- Vol. 38 (10) , 3159-3171
Broadband Green’s function-KKR-multiple scattering method for calculations of normalized band-field solutions in magneto-optics crystals
We apply the broadband Green’s function-KKR-multiple scattering theory (BBGF-KKR-MST) to calculate normalized band-field solutions of magneto-optic crystals. The advantage of the method is that the matrix eigensystem equations are of low order. For the first three bands, a total of three cylindrical waves is sufficient to characterize the eigensystem and the dimension of the matrix equation is only three. Using the eigenvalue and the eigenvector, the band-field solutions and the normalizations are calculated by two methods: (i) the method of complementary plane waves and (ii) the method of higher-order cylindrical waves. The complementary plane waves satisfy the extinction theorem. The higher-order cylindrical waves method requires only 15 coefficients of cylindrical waves to represent the band fields in the entire cell. The normalizations of the band-field solutions are calculated without the need for volumetric integrations. Results are illustrated for points in the first Brillouin zone. The CPU time requirement using MATLAB is 28 ms for the first four bands of a point in the Brillouin zone.
- 30 September 2021
- Published by Optica Publishing Group in Journal of the Optical Society of America B
- Vol. 38 (10) , 3159-3171
Broadband Green’s function-KKR-multiple scattering method for calculations of normalized band-field solutions in magneto-optics crystals
We apply the broadband Green’s function-KKR-multiple scattering theory (BBGF-KKR-MST) to calculate normalized band-field solutions of magneto-optic crystals. The advantage of the method is that the matrix eigensystem equations are of low order. For the first three bands, a total of three cylindrical waves is sufficient to characterize the eigensystem and the dimension of the matrix equation is only three. Using the eigenvalue and the eigenvector, the band-field solutions and the normalizations are calculated by two methods: (i) the method of complementary plane waves and (ii) the method of higher-order cylindrical waves. The complementary plane waves satisfy the extinction theorem. The higher-order cylindrical waves method requires only 15 coefficients of cylindrical waves to represent the band fields in the entire cell. The normalizations of the band-field solutions are calculated without the need for volumetric integrations. Results are illustrated for points in the first Brillouin zone. The CPU time requirement using MATLAB is 28 ms for the first four bands of a point in the Brillouin zone.
- Open Access
- 25 March 2021
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Journal of Selected Topics in Applied Earth Observations and Remote Sensing
- Vol. 14 (19391404) , 4547-4560
High-Resolution Soil-Moisture Maps Over Landslide Regions in Northern California Grassland Derived From SAR Backscattering Coefficients
Slow-moving landslides are destabilized by accumulated precipitation and consequent soil moisture. Yet, the continuous high-resolution soil-moisture measurements needed to aid the understanding of landslide processes are generally absent in steep terrain. Here, we produce soil-moisture time-series maps for a seasonally active grassland landslide in the northern California coast ranges, USA, using backscattering coefficients from NASA's uninhabited aerial vehicle synthetic aperture radar at 6-m resolution. A physically based radar scattering model is used to retrieve the near-surface (5-cm depth) soil moisture for the landslide. Both forward modeling (backscattering estimation) and the retrieval (soil-moisture validation) show good agreement. The root-mean-square errors (RMSE) for vertical transmit vertical receive (VV) and horizontal transmit horizontal receive (HH) polarizations in forward model comparison are 1.93 dB and 1.88 dB, respectively. The soil-moisture retrieval shows unbiased RMSE of 0.054 m 3 /m 3 . Our successful retrieval benefits from the surface and double-bounce scattering, which is common in grasslands. The retrieved maps show saturated wetness conditions within the active landslide boundaries. We also performed sensitivity tests for incidence angle and found that the retrieval is weakly dependent on the angle, especially while using copolarized HH and VV together. Using the two copolarized inputs, the retrieval is also not sensitive to the change of orientation angles of grass cylinders. The physical model inversion presented here can be generally applied for soil-moisture retrieval in areas with the same vegetation cover types in California.
- 25 March 2021
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Journal of Selected Topics in Applied Earth Observations and Remote Sensing
- Vol. 14 (19391404) , 4547-4560
Open AccessHigh-Resolution Soil-Moisture Maps Over Landslide Regions in Northern California Grassland Derived From SAR Backscattering Coefficients
Slow-moving landslides are destabilized by accumulated precipitation and consequent soil moisture. Yet, the continuous high-resolution soil-moisture measurements needed to aid the understanding of landslide processes are generally absent in steep terrain. Here, we produce soil-moisture time-series maps for a seasonally active grassland landslide in the northern California coast ranges, USA, using backscattering coefficients from NASA's uninhabited aerial vehicle synthetic aperture radar at 6-m resolution. A physically based radar scattering model is used to retrieve the near-surface (5-cm depth) soil moisture for the landslide. Both forward modeling (backscattering estimation) and the retrieval (soil-moisture validation) show good agreement. The root-mean-square errors (RMSE) for vertical transmit vertical receive (VV) and horizontal transmit horizontal receive (HH) polarizations in forward model comparison are 1.93 dB and 1.88 dB, respectively. The soil-moisture retrieval shows unbiased RMSE of 0.054 m 3 /m 3 . Our successful retrieval benefits from the surface and double-bounce scattering, which is common in grasslands. The retrieved maps show saturated wetness conditions within the active landslide boundaries. We also performed sensitivity tests for incidence angle and found that the retrieval is weakly dependent on the angle, especially while using copolarized HH and VV together. Using the two copolarized inputs, the retrieval is also not sensitive to the change of orientation angles of grass cylinders. The physical model inversion presented here can be generally applied for soil-moisture retrieval in areas with the same vegetation cover types in California.
- 24 November 2020
- Published by Optica Publishing Group in Journal of the Optical Society of America B
- Vol. 37 (12) , 3896-3907
Band calculations using broadband Green’s functions and the KKR method with applications to magneto-optics and photonic crystals
In this paper, we develop a method of simulations of using the broadband Green’s function (BBGF) in the Korringa Kohn Rostoker (KKR) method. The merit of the method is broadband such that once the initial setup is completed, the calculation at every frequency is calculated rapidly. The broadband Green’s function consists of a frequency-independent spatial summation and a spectral summation that has most of the factors frequency independent. Both summations have fast convergence. Analytical expressions of broadband coefficients of cylindrical waves are derived from the BBGF. The broadband cylindrical waves coefficients are then combined with the KKR method to calculate the determinant equation for a wide range of frequencies. Numerical results of the band diagrams and band surface currents are illustrated for magneto-optics and photonic crystals. The CPU time requirements, including setup, using MATLAB on a standard laptop, for computing the determinant at 1000 frequencies at a Bloch vector are 0.411 s and 1.206 s, respectively, for the cases of topological crystal of small scatterer relative to cell size and the photonic crystal of large scatterer comparable to cell size.
- 24 November 2020
- Published by Optica Publishing Group in Journal of the Optical Society of America B
- Vol. 37 (12) , 3896-3907
Band calculations using broadband Green’s functions and the KKR method with applications to magneto-optics and photonic crystals
In this paper, we develop a method of simulations of using the broadband Green’s function (BBGF) in the Korringa Kohn Rostoker (KKR) method. The merit of the method is broadband such that once the initial setup is completed, the calculation at every frequency is calculated rapidly. The broadband Green’s function consists of a frequency-independent spatial summation and a spectral summation that has most of the factors frequency independent. Both summations have fast convergence. Analytical expressions of broadband coefficients of cylindrical waves are derived from the BBGF. The broadband cylindrical waves coefficients are then combined with the KKR method to calculate the determinant equation for a wide range of frequencies. Numerical results of the band diagrams and band surface currents are illustrated for magneto-optics and photonic crystals. The CPU time requirements, including setup, using MATLAB on a standard laptop, for computing the determinant at 1000 frequencies at a Bloch vector are 0.411 s and 1.206 s, respectively, for the cases of topological crystal of small scatterer relative to cell size and the photonic crystal of large scatterer comparable to cell size.
- Open Access
- 25 June 2020
- Published by MDPI AG in Remote Sensing
- Vol. 12 (12) , 2048
Regional Tropical Aboveground Biomass Mapping with L-Band Repeat-Pass Interferometric Radar, Sparse Lidar, and Multiscale Superpixels
We introduce a multiscale superpixel approach that leverages repeat-pass interferometric coherence and sparse AGB estimates from a simulated spaceborne lidar in order to extend the NISAR mission’s applicable range of aboveground biomass (AGB) in tropical forests. Airborne and spaceborne L-band radar and full-waveform airborne lidar data are used to simulate the NISAR and GEDI mission, respectively. In addition to UAVSAR data, we use spaceborne ALOS-2/PALSAR-2 imagery with 14-day temporal baseline, which is comparable to NISAR’s 12-day baseline. Our reference AGB maps are derived from the airborne LVIS data during the AfriSAR campaign for three sites (Mondah, Ogooue, and Lope). Each tropical site has mean AGB of at least 125 Mg/ha in addition to areas with AGB exceeding 700 Mg/ha. Spatially sampling from these LVIS-derived AGB reference maps, we approximate GEDI AGB estimates. To evaluate our methodology, we perform several different analyses. First, we partition each study site into low (≤100 Mg/ha) and high (>100 Mg/ha) AGB areas, in conformity with the NISAR mission requirement to provide AGB estimates for forests between 0 and 100 Mg/ha with a RMSE below 20 Mg/ha. In the low AGB areas, this RMSE requirement is satisfied in Lope and Mondah and it fell short of the requirement in Ogooue by less 3 Mg/ha with UAVSAR and 6 Mg/ha with PALSAR-2. We note that our maps have finer spatial resolution (50 m) than NISAR requires (1 hectare). In the high AGB areas, the normalized RMSE increases to 51% (i.e., <90 Mg/ha), but with negligible bias for all three sites. Second, we train a single model to estimate AGB across both high and low AGB regimes simultaneously and obtain a normalized RMSE that is <60% (or <100 Mg/ha). Lastly, we show the use of both (a) multiscale superpixels and (b) interferometric coherence significantly improves the accuracy of the AGB estimates. The InSAR coherence improved the RMSE by approximately 8% at Mondah with both sensors, lowering the RMSE from 59 Mg/ha to 47.4 Mg/h with UAVSAR and from 57.1 Mg/ha to 46 Mg/ha. This work illustrates one of the numerous synergistic relationships between the spaceborne lidars, such as GEDI, with L-band SAR, such as PALSAR-2 and NISAR, in order to produce robust regional AGB in high biomass tropical regions.
- 25 June 2020
- Published by MDPI AG in Remote Sensing
- Vol. 12 (12) , 2048
Open AccessRegional Tropical Aboveground Biomass Mapping with L-Band Repeat-Pass Interferometric Radar, Sparse Lidar, and Multiscale Superpixels
We introduce a multiscale superpixel approach that leverages repeat-pass interferometric coherence and sparse AGB estimates from a simulated spaceborne lidar in order to extend the NISAR mission’s applicable range of aboveground biomass (AGB) in tropical forests. Airborne and spaceborne L-band radar and full-waveform airborne lidar data are used to simulate the NISAR and GEDI mission, respectively. In addition to UAVSAR data, we use spaceborne ALOS-2/PALSAR-2 imagery with 14-day temporal baseline, which is comparable to NISAR’s 12-day baseline. Our reference AGB maps are derived from the airborne LVIS data during the AfriSAR campaign for three sites (Mondah, Ogooue, and Lope). Each tropical site has mean AGB of at least 125 Mg/ha in addition to areas with AGB exceeding 700 Mg/ha. Spatially sampling from these LVIS-derived AGB reference maps, we approximate GEDI AGB estimates. To evaluate our methodology, we perform several different analyses. First, we partition each study site into low (≤100 Mg/ha) and high (>100 Mg/ha) AGB areas, in conformity with the NISAR mission requirement to provide AGB estimates for forests between 0 and 100 Mg/ha with a RMSE below 20 Mg/ha. In the low AGB areas, this RMSE requirement is satisfied in Lope and Mondah and it fell short of the requirement in Ogooue by less 3 Mg/ha with UAVSAR and 6 Mg/ha with PALSAR-2. We note that our maps have finer spatial resolution (50 m) than NISAR requires (1 hectare). In the high AGB areas, the normalized RMSE increases to 51% (i.e., <90 Mg/ha), but with negligible bias for all three sites. Second, we train a single model to estimate AGB across both high and low AGB regimes simultaneously and obtain a normalized RMSE that is <60% (or <100 Mg/ha). Lastly, we show the use of both (a) multiscale superpixels and (b) interferometric coherence significantly improves the accuracy of the AGB estimates. The InSAR coherence improved the RMSE by approximately 8% at Mondah with both sensors, lowering the RMSE from 59 Mg/ha to 47.4 Mg/h with UAVSAR and from 57.1 Mg/ha to 46 Mg/ha. This work illustrates one of the numerous synergistic relationships between the spaceborne lidars, such as GEDI, with L-band SAR, such as PALSAR-2 and NISAR, in order to produce robust regional AGB in high biomass tropical regions.
- Open Access
- 19 June 2020
- Vol. 12 (12)
Spatial ETL for 3D Building Modelling based on Unmanned Aerial Vehicle Data in Semi-Urban Areas
- 19 June 2020
- Vol. 12 (12)
Open AccessSpatial ETL for 3D Building Modelling based on Unmanned Aerial Vehicle Data in Semi-Urban Areas
- 18 September 2019
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Electromagnetic Compatibility
- Vol. 62 (5) , 2209-2216
Broadband Green's Function (BBGFL) Method With Imaginary Wavenumber Extractions for Simulations of Radiated Emissions From Irregular Shaped Printed Circuit Board
In this article, we apply the broadband Green's function for fast full-wave simulations of the radiated emissions from the printed circuit boards (PCBs) of irregular shape. Changes were made on the previous version that improve the computational efficiency and accuracies of the solutions. The improvements include imaginary wavenumber extractions for the acceleration of convergence of modal expansions without the need of high-order quadrature, and the fast-exact normalization of modes. Results of the radiated fields are illustrated over a broad frequency range up to 10 GHz and for irregular shaped PCB up to 4 in in sizes. The results are in good agreement with the method of moment for both the modal solutions and the radiated emissions. The results are shown to be more accurate than the previous version of broadband Green's functions with low wavenumber extractions. The significant computational efficiency makes this technique useful for electronic design automation to electromagnetic interference/electromagnetic compatibility applications.
- 18 September 2019
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Electromagnetic Compatibility
- Vol. 62 (5) , 2209-2216
Broadband Green's Function (BBGFL) Method With Imaginary Wavenumber Extractions for Simulations of Radiated Emissions From Irregular Shaped Printed Circuit Board
In this article, we apply the broadband Green's function for fast full-wave simulations of the radiated emissions from the printed circuit boards (PCBs) of irregular shape. Changes were made on the previous version that improve the computational efficiency and accuracies of the solutions. The improvements include imaginary wavenumber extractions for the acceleration of convergence of modal expansions without the need of high-order quadrature, and the fast-exact normalization of modes. Results of the radiated fields are illustrated over a broad frequency range up to 10 GHz and for irregular shaped PCB up to 4 in in sizes. The results are in good agreement with the method of moment for both the modal solutions and the radiated emissions. The results are shown to be more accurate than the previous version of broadband Green's functions with low wavenumber extractions. The significant computational efficiency makes this technique useful for electronic design automation to electromagnetic interference/electromagnetic compatibility applications.
- Open Access
Analysis of Floodplain Dynamics in the Atrato River Colombia Using SAR Interferometry
Floodplain water flows have large volumetric flowrates and high complexity in space and time that are difficult to understand using water level gauges. We here analyze the spatial and temporal fluctuations of surface water flows in the floodplain of the Atrato River, Colombia, in order to evaluate their hydrological connectivity. The basin is one of the rainiest areas of the world with wetland ecosystems threatened by the expansion of agriculture and mining activities. We used 16 Differential Interferometric Synthetic Aperture Radars (DInSAR) phase observations from the ALOS-PALSAR L-band instrument acquired between 2008–2010 to characterize the flow of surface water. We were able to observe water level change in vegetated wetland areas and identify flooding patterns. In the lower basin, flow patterns are conditioned by fluctuations in the levels of the main river channel, whereas in the middle basin, topography and superficial channels strongly influence the flow and connectivity. We found that the variations in water level in a station on the main channel 87 km upstream explained more than 56% of the variations in water level in the floodplain. This result shows that, despite current expansion of agriculture and mining activities, there remain significant hydrological connectivity between wetlands and the Atrato River. This study demonstrates the use of DInSAR for a spatially comprehensive monitoring of the Atrato River basin hydrology. For the first time, we identified the spatiotemporal patterns of surface water flow of the region. We recommend these observations serve as a baseline to monitor the potential impact of ongoing human activities on surface water flows across the Atrato River basin.
Open AccessAnalysis of Floodplain Dynamics in the Atrato River Colombia Using SAR Interferometry
Floodplain water flows have large volumetric flowrates and high complexity in space and time that are difficult to understand using water level gauges. We here analyze the spatial and temporal fluctuations of surface water flows in the floodplain of the Atrato River, Colombia, in order to evaluate their hydrological connectivity. The basin is one of the rainiest areas of the world with wetland ecosystems threatened by the expansion of agriculture and mining activities. We used 16 Differential Interferometric Synthetic Aperture Radars (DInSAR) phase observations from the ALOS-PALSAR L-band instrument acquired between 2008–2010 to characterize the flow of surface water. We were able to observe water level change in vegetated wetland areas and identify flooding patterns. In the lower basin, flow patterns are conditioned by fluctuations in the levels of the main river channel, whereas in the middle basin, topography and superficial channels strongly influence the flow and connectivity. We found that the variations in water level in a station on the main channel 87 km upstream explained more than 56% of the variations in water level in the floodplain. This result shows that, despite current expansion of agriculture and mining activities, there remain significant hydrological connectivity between wetlands and the Atrato River. This study demonstrates the use of DInSAR for a spatially comprehensive monitoring of the Atrato River basin hydrology. For the first time, we identified the spatiotemporal patterns of surface water flow of the region. We recommend these observations serve as a baseline to monitor the potential impact of ongoing human activities on surface water flows across the Atrato River basin.