Dong Yang
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Dong Yang has a total of 17 co-authors. Here are the top co-authors by number of shared publications:
Ming Han
Hebei university of Technology
4 shared publications- Ming Han
Hebei university of Technology
4 shared publications Jiajin Che
Hebei university of Technology
2 shared publications- Jinyue Liu
School of Mechanical Engineering, Hebei University of Technology, Tianjin 300401, China
2 shared publications - Tiejun Li
School of Mechanical Engineering, Hebei University of Science and Technology, Shijiazhuang 050018, China
2 shared publications Baojun Shi
School of Mechanical Engineering, Hebei University of Technology, Tianjin, China
1 shared publication
Latest Publications
- Open Access
Research on Energy Consumption Optimization Strategies of Robot Joints Based on NSGA-II and Energy Consumption Mapping
Robot energy consumption is a prominent challenge in intelligent manufacturing and construction. Reducing energy consumption during robot trajectory execution is an urgent issue requiring immediate attention. In view of the shortcomings of traditional trajectory optimization methods, this paper proposes a multi-objective trajectory optimization method that combines energy consumption mapping with the NSGA-II, aiming to reduce robots’ trajectory energy consumption and optimize execution efficiency. By establishing a dynamic energy consumption model, energy consumption mapping is employed to constrain energy consumption within the robot’s workspace, thereby providing guidance for the optimization process. Simultaneously, with energy consumption minimization and time consumption as optimization objectives, the NSGA-II is utilized to obtain the Pareto-optimal solution set through non-dominated sorting and congestion distance calculation. Energy consumption mapping serves as a dynamic feedback mechanism during the optimization process, guiding the distribution of trajectory points towards low-energy-consumption regions, accelerating algorithm convergence, and enhancing the quality of the solution set. The experimental results demonstrate that the proposed method can significantly reduce robots’ trajectory energy consumption and achieve an effective balance between energy consumption and time consumption. Compared with the conventional NSGA-II normalized weighted function method in similar task scenarios, the robot can save 14.87% and 10.47% of its energy consumption, respectively. Compared with traditional methods, this method exhibits superior energy-saving performance and adaptability in complex task environments, providing a novel solution for the efficient trajectory planning of robots.
Open AccessResearch on Energy Consumption Optimization Strategies of Robot Joints Based on NSGA-II and Energy Consumption Mapping
Robot energy consumption is a prominent challenge in intelligent manufacturing and construction. Reducing energy consumption during robot trajectory execution is an urgent issue requiring immediate attention. In view of the shortcomings of traditional trajectory optimization methods, this paper proposes a multi-objective trajectory optimization method that combines energy consumption mapping with the NSGA-II, aiming to reduce robots’ trajectory energy consumption and optimize execution efficiency. By establishing a dynamic energy consumption model, energy consumption mapping is employed to constrain energy consumption within the robot’s workspace, thereby providing guidance for the optimization process. Simultaneously, with energy consumption minimization and time consumption as optimization objectives, the NSGA-II is utilized to obtain the Pareto-optimal solution set through non-dominated sorting and congestion distance calculation. Energy consumption mapping serves as a dynamic feedback mechanism during the optimization process, guiding the distribution of trajectory points towards low-energy-consumption regions, accelerating algorithm convergence, and enhancing the quality of the solution set. The experimental results demonstrate that the proposed method can significantly reduce robots’ trajectory energy consumption and achieve an effective balance between energy consumption and time consumption. Compared with the conventional NSGA-II normalized weighted function method in similar task scenarios, the robot can save 14.87% and 10.47% of its energy consumption, respectively. Compared with traditional methods, this method exhibits superior energy-saving performance and adaptability in complex task environments, providing a novel solution for the efficient trajectory planning of robots.
- 14 May 2025
- Published by Springer Nature
- p. 687-700
Research on Rationality Analysis and Optimization Method of Driving Layout of Building Robots
- 14 May 2025
- Published by Springer Nature
- p. 687-700
Research on Rationality Analysis and Optimization Method of Driving Layout of Building Robots
- 3 May 2025
- Published by Springer Nature
- p. 141-155
Stiffness Modeling and Performance Optimization of Redundant Degree of Freedom Quasi-Serial Manipulator
- 3 May 2025
- Published by Springer Nature
- p. 141-155
Stiffness Modeling and Performance Optimization of Redundant Degree of Freedom Quasi-Serial Manipulator
- 3 May 2025
- Published by Springer Nature
- p. 633-647
Optimal Trajectory Planning of Construction Robot Energy Consumption Based on Multi-objective Optimization
- 3 May 2025
- Published by Springer Nature
- p. 633-647
Optimal Trajectory Planning of Construction Robot Energy Consumption Based on Multi-objective Optimization
- 27 March 2024
- Published by Cambridge University Press (CUP) in Robotica
- Vol. 42 (5) , 1649-1675
Performance evaluation and dimensional optimization design of planar 6R redundant actuation parallel mechanism
Aiming at the problems of small good workspace, many singular configurations, and limited carrying capacity of non-redundant parallel mechanisms, a full-redundant drive parallel mechanism is designed and developed, and its performance evaluation, good workspace identification, and scale optimization design are studied. First, the kinematics analysis of the planar 6R parallel mechanism is completed. Then, the motion/force transmission performance evaluation index of the mechanism is established, and the singularity analysis of the mechanism is completed. Based on this, the fully redundant driving mode of the mechanism is determined, and the good transmission workspace of the mechanism in this mode is identified. Then, the mapping relationship between the performance and scale of the mechanism is established by using the space model theory, and the scale optimization of the mechanism is completed. Finally, the robot prototype is made according to the optimal scale, and the performance verification is carried out based on the research of dynamics and control strategy. The results show that the fully redundant actuation parallel mechanism obtained by design optimization has high precision and large bearing capacity. The position repeatability and position accuracy are 0.053 mm and 0.635 mm, respectively, and the load weight ratio can reach 15.83%. The research results of this paper complement and improve the performance evaluation and scale optimization system of redundantly actuated parallel mechanisms.
- 27 March 2024
- Published by Cambridge University Press (CUP) in Robotica
- Vol. 42 (5) , 1649-1675
Performance evaluation and dimensional optimization design of planar 6R redundant actuation parallel mechanism
Aiming at the problems of small good workspace, many singular configurations, and limited carrying capacity of non-redundant parallel mechanisms, a full-redundant drive parallel mechanism is designed and developed, and its performance evaluation, good workspace identification, and scale optimization design are studied. First, the kinematics analysis of the planar 6R parallel mechanism is completed. Then, the motion/force transmission performance evaluation index of the mechanism is established, and the singularity analysis of the mechanism is completed. Based on this, the fully redundant driving mode of the mechanism is determined, and the good transmission workspace of the mechanism in this mode is identified. Then, the mapping relationship between the performance and scale of the mechanism is established by using the space model theory, and the scale optimization of the mechanism is completed. Finally, the robot prototype is made according to the optimal scale, and the performance verification is carried out based on the research of dynamics and control strategy. The results show that the fully redundant actuation parallel mechanism obtained by design optimization has high precision and large bearing capacity. The position repeatability and position accuracy are 0.053 mm and 0.635 mm, respectively, and the load weight ratio can reach 15.83%. The research results of this paper complement and improve the performance evaluation and scale optimization system of redundantly actuated parallel mechanisms.
- 1 February 2024
- Published by ASME International in Journal of Mechanisms and Robotics
- Vol. 16 (9) , 1-40
Drive Layout Configuration Strategy and Scale Optimization Design of Multi-Drive Mode Parallel Mechanism
Aiming at the inherent defects of single-drive mode parallel mechanisms, such as small good workspace and many singular configurations, a new multi-drive mode parallel mechanism is proposed from the perspective of driving innovation. Taking the planar 6R parallel mechanism as an example, the driving layout configuration strategy and scale optimization design are studied. First, the potential driving layout of the mechanism is analyzed, and the inverse kinematics model of the mechanism is established. Then, based on the motion/force transmission index, the singular space and good transmission workspace of the mechanism are identified, and the mechanism-driven layout configuration strategy is formulated to complete the performance comparison analysis. Finally, based on the performance map method, the scale optimization design of the mechanism is carried out, the prototype is developed and manufactured, and the experimental verification is carried out. The research results show that the multi-drive mode parallel mechanism can improve its kinematic performance without changing the topological structure and scale parameters of the mechanism.
- 1 February 2024
- Published by ASME International in Journal of Mechanisms and Robotics
- Vol. 16 (9) , 1-40
Drive Layout Configuration Strategy and Scale Optimization Design of Multi-Drive Mode Parallel Mechanism
Aiming at the inherent defects of single-drive mode parallel mechanisms, such as small good workspace and many singular configurations, a new multi-drive mode parallel mechanism is proposed from the perspective of driving innovation. Taking the planar 6R parallel mechanism as an example, the driving layout configuration strategy and scale optimization design are studied. First, the potential driving layout of the mechanism is analyzed, and the inverse kinematics model of the mechanism is established. Then, based on the motion/force transmission index, the singular space and good transmission workspace of the mechanism are identified, and the mechanism-driven layout configuration strategy is formulated to complete the performance comparison analysis. Finally, based on the performance map method, the scale optimization design of the mechanism is carried out, the prototype is developed and manufactured, and the experimental verification is carried out. The research results show that the multi-drive mode parallel mechanism can improve its kinematic performance without changing the topological structure and scale parameters of the mechanism.
- 13 October 2023
- Published by Springer Nature
- p. 578-589
Research on Selective Degradation Strategy of Redundant Degrees of Freedom for Planar 6R Parallel Mechanism
- 13 October 2023
- Published by Springer Nature
- p. 578-589
Research on Selective Degradation Strategy of Redundant Degrees of Freedom for Planar 6R Parallel Mechanism
- Open Access
- 1 December 2014
- Published by SAGE Publications in Advances in Mechanical Engineering
- Vol. 12 (12)
Mobility analysis of a typical multi-loop coupled mechanism based on screw theory and its drive layout optimization
Improving the load-to-weight ratio of robots is an essential issue in the field of construction robots. In the present study, a method for analyzing the mobility of the typical multi-loop coupled mechanism is proposed, which combines the iterative replacement of generalized kinematic pairs with the screw theory. Then, the driving force/torque, driving power, and total power of actuators are considered as the evaluation indices, and the influence of different drive layouts on the mechanism is analyzed. Obtained results show that the driving force of the moving pair in the drive layout S1 or S3 changes smoothly compared with that in the drive layout S2, and the peak values of the driving force and the driving torque reduce by 49% and 12%, respectively. This demonstrates that the drive layout S1 effectively reduces the quality of the actuators. Finally, the coupled mechanism with the drive layout is applied in a high-altitude curtain wall installation robot, and the prototype of the robot is developed based on the coupled mechanism. Performed experiments show that the load-to-weight ratio in the proposed robot is about 13%.
- 1 December 2014
- Published by SAGE Publications in Advances in Mechanical Engineering
- Vol. 12 (12)
Open AccessMobility analysis of a typical multi-loop coupled mechanism based on screw theory and its drive layout optimization
Improving the load-to-weight ratio of robots is an essential issue in the field of construction robots. In the present study, a method for analyzing the mobility of the typical multi-loop coupled mechanism is proposed, which combines the iterative replacement of generalized kinematic pairs with the screw theory. Then, the driving force/torque, driving power, and total power of actuators are considered as the evaluation indices, and the influence of different drive layouts on the mechanism is analyzed. Obtained results show that the driving force of the moving pair in the drive layout S1 or S3 changes smoothly compared with that in the drive layout S2, and the peak values of the driving force and the driving torque reduce by 49% and 12%, respectively. This demonstrates that the drive layout S1 effectively reduces the quality of the actuators. Finally, the coupled mechanism with the drive layout is applied in a high-altitude curtain wall installation robot, and the prototype of the robot is developed based on the coupled mechanism. Performed experiments show that the load-to-weight ratio in the proposed robot is about 13%.