David Steuer
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
David Steuer has a total of 44 co-authors. Here are the top co-authors by number of shared publications:
- Marc Böke
Ruhr University Bochum
17 shared publications - Volker Schulz-Von der Gathen
Ruhr-University Bochum
17 shared publications - Judith Golda
Plasma Interface Physics, Ruhr University Bochum, Bochum, Germany
15 shared publications - Henrik van Impel
Plasma Interface Physics, Ruhr-University Bochum, D-44801 Bochum, Germany
11 shared publications - Ihor Korolov
Ruhr University Bochum
7 shared publications - Julian Schulze
Ruhr University Bochum
6 shared publications
Latest Publications
- Open Access
- 12 September 2026
- Published by Wiley in Plasma Processes and Polymers
- Vol. 23 (9) , e70245
A Micro‐Cavity Plasma Array Reactor for Fundamental Studies on Plasma‐Catalytic Conversion of n‐Butane
Using the MCPA, we exemplarily investigate the plasma catalytic conversion of n‐butane (), employing ex‐situ Fourier transform infrared spectroscopy at the gas outlet to evaluate conversion efficiency and product selectivity. Systematic examination of gas composition, catalyst material, and temperature reveals that under high helium dilution conditions, varying the specific energy input by voltage from 0.05 to 0.49 eV/molecule yields a maximum conversion of 34%. Surprisingly, the presence of the catalyst at room temperature reduces conversion to a maximum of 20%, demonstrating an anti‐synergistic effect under the applied discharge conditions. These findings highlight the need for more efficient plasma catalyst systems to enhance conversion and improve product selectivity.
- 12 September 2026
- Published by Wiley in Plasma Processes and Polymers
- Vol. 23 (9) , e70245
Open AccessA Micro‐Cavity Plasma Array Reactor for Fundamental Studies on Plasma‐Catalytic Conversion of n‐Butane
Using the MCPA, we exemplarily investigate the plasma catalytic conversion of n‐butane (), employing ex‐situ Fourier transform infrared spectroscopy at the gas outlet to evaluate conversion efficiency and product selectivity. Systematic examination of gas composition, catalyst material, and temperature reveals that under high helium dilution conditions, varying the specific energy input by voltage from 0.05 to 0.49 eV/molecule yields a maximum conversion of 34%. Surprisingly, the presence of the catalyst at room temperature reduces conversion to a maximum of 20%, demonstrating an anti‐synergistic effect under the applied discharge conditions. These findings highlight the need for more efficient plasma catalyst systems to enhance conversion and improve product selectivity.
- Open Access
- 1 August 2026
- Published by IOP Publishing in Plasma Sources Science and Technology
- Vol. 35 (8) , 085005
3D CO-TALIF distribution below a micro cavity discharge: a systematic approach for plasma catalysis
We investigate a micro cavity plasma array (MCPA) reactor operated at atmospheric pressure, offering excellent diagnostic accessibility and flexible opportunities for catalyst integration. Here, the dissociation of CO 2 diluted in helium into CO is investigated. The diagnostic setup, combining two-photon absorption laser-induced fluorescence with an ICCD camera, enables three-dimensional spatially resolved measurements of CO number densities below the CO-generating discharges. The measured distributions are compared to a basic three-dimensional diffusion model, showing good agreement and revealing the dominant transport mechanisms. Flow variation studies indicate that the gas flow inside the reactor follows a laminar, Poiseuille-like profile, while the transport behavior is consistent with literature values for the diffusion coefficient of CO, further validating the model. The high estimated local dissociation within the MCPA discharges (about 40%) results in saturation of CO fraction under increasing voltage. Combined with complementary diagnostics already presented for this discharge, including measurements of surface charges, electric fields, and atomic oxygen, this approach provides a suitable platform for systematic studies of plasma–catalyst interactions.
- 1 August 2026
- Published by IOP Publishing in Plasma Sources Science and Technology
- Vol. 35 (8) , 085005
Open Access3D CO-TALIF distribution below a micro cavity discharge: a systematic approach for plasma catalysis
We investigate a micro cavity plasma array (MCPA) reactor operated at atmospheric pressure, offering excellent diagnostic accessibility and flexible opportunities for catalyst integration. Here, the dissociation of CO 2 diluted in helium into CO is investigated. The diagnostic setup, combining two-photon absorption laser-induced fluorescence with an ICCD camera, enables three-dimensional spatially resolved measurements of CO number densities below the CO-generating discharges. The measured distributions are compared to a basic three-dimensional diffusion model, showing good agreement and revealing the dominant transport mechanisms. Flow variation studies indicate that the gas flow inside the reactor follows a laminar, Poiseuille-like profile, while the transport behavior is consistent with literature values for the diffusion coefficient of CO, further validating the model. The high estimated local dissociation within the MCPA discharges (about 40%) results in saturation of CO fraction under increasing voltage. Combined with complementary diagnostics already presented for this discharge, including measurements of surface charges, electric fields, and atomic oxygen, this approach provides a suitable platform for systematic studies of plasma–catalyst interactions.
- Open Access
- 23 May 2026
- Published by Springer Nature in Plasma Chemistry and Plasma Processing
- Vol. 46 (4)
Experimental Verification of Laminar Gas Flows and Localized Plasma-Induced Perturbations in a Microcavity Plasma Array
Dielectric barrier discharges (DBDs), and in particular microcavity plasma arrays (MCPAs), represent a promising reactor platform for plasma-catalytic studies, as they allow plasma generation directly at catalytic surfaces, thereby providing direct access to the investigation of plasma–surface interactions. In addition to fundamental plasma parameters such as electric fields and species densities, the gas flow through the reactor plays a crucial role in the process. It directly determines the effective treatment time and volume, while the underlying flow dynamics govern the transport of plasma-generated species such as reactive molecules and atoms. Besides the reactor geometry, the discharge itself may influence the flow through induced forces, potentially generating vortices and enhancing mixing, which could improve conversion efficiency. While complex flow fields may be desirable for maximizing process efficiency, research reactors such as the MCPA benefit from predictable transport conditions when the primary objective is the study of plasma–surface interactions. In this study, the flow dynamics within an MCPA reactor are investigated using particle image velocimetry (PIV) in helium. Spatially and temporally resolved measurements are used to analyze the influence of the plasma discharge on the gas flow. The results show that the discharge can exert a measurable influence on the flow field; however, this effect is spatially confined to a region within approximately 0.5 mm distance from the electrode and is most pronounced during the ignition phase of the discharge. During steady-state operation, the plasma has no significant impact on the overall flow behavior. Under these conditions, the velocity field can be described by a classical laminar Poiseuille profile.
- 23 May 2026
- Published by Springer Nature in Plasma Chemistry and Plasma Processing
- Vol. 46 (4)
Open AccessExperimental Verification of Laminar Gas Flows and Localized Plasma-Induced Perturbations in a Microcavity Plasma Array
Dielectric barrier discharges (DBDs), and in particular microcavity plasma arrays (MCPAs), represent a promising reactor platform for plasma-catalytic studies, as they allow plasma generation directly at catalytic surfaces, thereby providing direct access to the investigation of plasma–surface interactions. In addition to fundamental plasma parameters such as electric fields and species densities, the gas flow through the reactor plays a crucial role in the process. It directly determines the effective treatment time and volume, while the underlying flow dynamics govern the transport of plasma-generated species such as reactive molecules and atoms. Besides the reactor geometry, the discharge itself may influence the flow through induced forces, potentially generating vortices and enhancing mixing, which could improve conversion efficiency. While complex flow fields may be desirable for maximizing process efficiency, research reactors such as the MCPA benefit from predictable transport conditions when the primary objective is the study of plasma–surface interactions. In this study, the flow dynamics within an MCPA reactor are investigated using particle image velocimetry (PIV) in helium. Spatially and temporally resolved measurements are used to analyze the influence of the plasma discharge on the gas flow. The results show that the discharge can exert a measurable influence on the flow field; however, this effect is spatially confined to a region within approximately 0.5 mm distance from the electrode and is most pronounced during the ignition phase of the discharge. During steady-state operation, the plasma has no significant impact on the overall flow behavior. Under these conditions, the velocity field can be described by a classical laminar Poiseuille profile.
- 11 July 2025
- Published by The Electrochemical Society in ECS Meeting Abstracts
- Vol. MA2025-01 (22) , 1376
(Invited) Enhancing Catalysis with Atmospheric Pressure Plasmas: Unraveling Fundamental Processes and Applications
The integration of low-temperature plasmas with catalysis has recently gained attention as a method to store renewable energy in chemical forms, potentially facilitating the electrification of industry in response to the climate crisis. Although the combination of traditional catalysts with non-equilibrium plasmas has demonstrated promising synergies, much of the research remains empirical. Studies indicate that atmospheric pressure plasmas, with their distinctive non-equilibrium properties and surface interactions, can enhance classical catalysis. However, understanding the underlying mechanisms is challenging due to the complexity of diagnostics and analysis in these combined plasma-catalyst reactors. This presentation aims to elucidate fundamental processes to enhance our understanding of the plasma interface physics that drive plasma catalytic performance. We will focus on the design and diagnostics of atmospheric pressure non-equilibrium plasmas to unravel elemental plasma physical processes. The discussion will cover fundamental principles and explore various applications, including biocatalysis, gas conversion, and catalyst surface modification for processes like electrolysis. Both theoretical and experimental research in the field will be examined, along with current limitations and challenges. Special emphasis will be placed on the roles of charge carriers, reactive species, reactive species transport, temperature, and excitation frequency. This research is funded by the German Research Foundation within CRC 1316.
- 11 July 2025
- Published by The Electrochemical Society in ECS Meeting Abstracts
- Vol. MA2025-01 (22) , 1376
(Invited) Enhancing Catalysis with Atmospheric Pressure Plasmas: Unraveling Fundamental Processes and Applications
The integration of low-temperature plasmas with catalysis has recently gained attention as a method to store renewable energy in chemical forms, potentially facilitating the electrification of industry in response to the climate crisis. Although the combination of traditional catalysts with non-equilibrium plasmas has demonstrated promising synergies, much of the research remains empirical. Studies indicate that atmospheric pressure plasmas, with their distinctive non-equilibrium properties and surface interactions, can enhance classical catalysis. However, understanding the underlying mechanisms is challenging due to the complexity of diagnostics and analysis in these combined plasma-catalyst reactors. This presentation aims to elucidate fundamental processes to enhance our understanding of the plasma interface physics that drive plasma catalytic performance. We will focus on the design and diagnostics of atmospheric pressure non-equilibrium plasmas to unravel elemental plasma physical processes. The discussion will cover fundamental principles and explore various applications, including biocatalysis, gas conversion, and catalyst surface modification for processes like electrolysis. Both theoretical and experimental research in the field will be examined, along with current limitations and challenges. Special emphasis will be placed on the roles of charge carriers, reactive species, reactive species transport, temperature, and excitation frequency. This research is funded by the German Research Foundation within CRC 1316.
- Open Access
- 1 July 2025
- Published by IOP Publishing in Plasma Sources Science and Technology
- Vol. 34 (7) , 075012
Analyzing atomic oxygen product evolution in micro cavity plasma arrays by a combination of a multi-PMT OES setup and a 0D chemical model
Dielectric barrier discharges (DBDs) are widely used in applications such as ozone generation and volatile organic compound treatment, where performance can be enhanced through catalyst integration. A fundamental understanding of reactive species generation is essential for advancing these technologies. However, temporally resolving reactive species production especially during the initial discharges remains a challenge, despite its importance for controlling production rates and energy efficiency. This study examines atomic oxygen production as a model system for reactive species production in a micro-cavity plasma array, a custom surface DBD confined to micrometer-sized cavities. Optical emission spectroscopy was employed to investigate plasma-chemical processes in helium with 0.1%–0.25% molecular oxygen admixture at atmospheric pressure. The discharge, powered by a 15 kHz, 600 V amplitude triangular voltage, achieved near-complete oxygen dissociation (up to 100%), as determined via helium state-enhanced actinometry. A novel multi-photomultiplier system enabled precise temporal tracking of atomic oxygen density and dissociation dynamics. To ensure measurement accuracy, a basic 0D chemical model was developed, reinforcing the reliability of the experimental results.
- 1 July 2025
- Published by IOP Publishing in Plasma Sources Science and Technology
- Vol. 34 (7) , 075012
Open AccessAnalyzing atomic oxygen product evolution in micro cavity plasma arrays by a combination of a multi-PMT OES setup and a 0D chemical model
Dielectric barrier discharges (DBDs) are widely used in applications such as ozone generation and volatile organic compound treatment, where performance can be enhanced through catalyst integration. A fundamental understanding of reactive species generation is essential for advancing these technologies. However, temporally resolving reactive species production especially during the initial discharges remains a challenge, despite its importance for controlling production rates and energy efficiency. This study examines atomic oxygen production as a model system for reactive species production in a micro-cavity plasma array, a custom surface DBD confined to micrometer-sized cavities. Optical emission spectroscopy was employed to investigate plasma-chemical processes in helium with 0.1%–0.25% molecular oxygen admixture at atmospheric pressure. The discharge, powered by a 15 kHz, 600 V amplitude triangular voltage, achieved near-complete oxygen dissociation (up to 100%), as determined via helium state-enhanced actinometry. A novel multi-photomultiplier system enabled precise temporal tracking of atomic oxygen density and dissociation dynamics. To ensure measurement accuracy, a basic 0D chemical model was developed, reinforcing the reliability of the experimental results.
- Open Access
- 27 December 2024
- Published by IOP Publishing in Journal of Physics D: Applied Physics
- Vol. 58 (8) , 085211
Mode transition in a helium barrier discharge with oxygen admixtures: insights into a micro cavity plasma array reactor
Dielectric barrier discharges (DBDs) offer great potential for applications such as volatile organic compounds (VOCs) conversion or plasma catalysis. For many of these applications, an admixture of molecular oxygen is important, for example, to oxidize the gases to be treated. However, oxygen addition can lead to a drastic change in discharge dynamics, which may affect conversion efficiency. The discharge may transition to a filamentary mode, which could influence plasma chemical processes or in extreme cases potentially damage the reactor. This study investigates the discharge mode of a micro cavity plasma array operated at atmospheric pressure with a helium flow (1–2 slm) containing small oxygen admixtures (0%–5%). A multitude of parameters as voltage, current, power, and emission are investigated for characterization. Additionally, the electric field, mean electron energy and atomic oxygen density are examined depending on the oxygen admixture. With pure helium, a homogeneous atmospheric pressure glow discharge is observed, appearing as a quasi-continuous glow discharge. With small oxygen admixtures (0.1%–1%), individual discharge pulses become visible, though they remain separated (pseudo glow discharge). At higher oxygen admixtures ( ⩾ 1%), a mode transition to a filamentary discharge is observed. The measurements indicate that the discharge mode, especially the individual discharge pulses, has a significant impact on conversion efficiency. This knowledge can help in the future to fine-tune the discharge mode using external parameters such as voltage waveform or frequency to optimize conversion efficiency.
- 27 December 2024
- Published by IOP Publishing in Journal of Physics D: Applied Physics
- Vol. 58 (8) , 085211
Open AccessMode transition in a helium barrier discharge with oxygen admixtures: insights into a micro cavity plasma array reactor
Dielectric barrier discharges (DBDs) offer great potential for applications such as volatile organic compounds (VOCs) conversion or plasma catalysis. For many of these applications, an admixture of molecular oxygen is important, for example, to oxidize the gases to be treated. However, oxygen addition can lead to a drastic change in discharge dynamics, which may affect conversion efficiency. The discharge may transition to a filamentary mode, which could influence plasma chemical processes or in extreme cases potentially damage the reactor. This study investigates the discharge mode of a micro cavity plasma array operated at atmospheric pressure with a helium flow (1–2 slm) containing small oxygen admixtures (0%–5%). A multitude of parameters as voltage, current, power, and emission are investigated for characterization. Additionally, the electric field, mean electron energy and atomic oxygen density are examined depending on the oxygen admixture. With pure helium, a homogeneous atmospheric pressure glow discharge is observed, appearing as a quasi-continuous glow discharge. With small oxygen admixtures (0.1%–1%), individual discharge pulses become visible, though they remain separated (pseudo glow discharge). At higher oxygen admixtures ( ⩾ 1%), a mode transition to a filamentary discharge is observed. The measurements indicate that the discharge mode, especially the individual discharge pulses, has a significant impact on conversion efficiency. This knowledge can help in the future to fine-tune the discharge mode using external parameters such as voltage waveform or frequency to optimize conversion efficiency.
- Open Access
- 1 December 2024
- Published by IOP Publishing in Plasma Sources Science and Technology
- Vol. 33 (12) , 125007
Measurement of atomic oxygen densities using TALIF on a dielectric barrier discharge: insights into the volume above a micro cavity plasma array
Dielectric barrier discharges, particularly micro cavity plasma arrays, offer significant potential for plasma-catalytic research due to their ability to ignite plasma in direct contact with a catalytic surface, enabling the observation of plasma-surface interactions. A key factor in their application is the generation of reactive species, such as atomic oxygen, within the cavities. These species can interact with both the surface (e.g. for activation or cleaning) and the gas being treated (e.g. for oxidation). Given the central role of oxygen atoms in plasma catalysis and their use as a model for more complex species, this work investigates the transport of these atoms out of the cavities. Two-photon absorption laser-induced fluorescence spectroscopy with picosecond laser excitation is performed in the volume above the cavities. The results are compared with a basic diffusion model. The reactor operates with a He/O2 mixture at a flow rate of 1 slm and atmospheric pressure. Densities of up to 1016 cm−3 are measured near the surface. Time-dependent measurements show that, at a distance of 350 µm from the surface, a density equilibrium is reached within less than 3 ms of reactor operation. Decay times due to ozone formation after the reactor is turned off are on a similar scale. Spatially resolved measurements show that the oxygen density decreases exponentially from the surface but remains detectable up to approximately 1 mm above the surface, indicating significant application potential. Variations in the O2 admixture show a density maximum at 0.4%, confirming previous helium state enhanced actinometry measurements within the cavities.
- 1 December 2024
- Published by IOP Publishing in Plasma Sources Science and Technology
- Vol. 33 (12) , 125007
Open AccessMeasurement of atomic oxygen densities using TALIF on a dielectric barrier discharge: insights into the volume above a micro cavity plasma array
Dielectric barrier discharges, particularly micro cavity plasma arrays, offer significant potential for plasma-catalytic research due to their ability to ignite plasma in direct contact with a catalytic surface, enabling the observation of plasma-surface interactions. A key factor in their application is the generation of reactive species, such as atomic oxygen, within the cavities. These species can interact with both the surface (e.g. for activation or cleaning) and the gas being treated (e.g. for oxidation). Given the central role of oxygen atoms in plasma catalysis and their use as a model for more complex species, this work investigates the transport of these atoms out of the cavities. Two-photon absorption laser-induced fluorescence spectroscopy with picosecond laser excitation is performed in the volume above the cavities. The results are compared with a basic diffusion model. The reactor operates with a He/O2 mixture at a flow rate of 1 slm and atmospheric pressure. Densities of up to 1016 cm−3 are measured near the surface. Time-dependent measurements show that, at a distance of 350 µm from the surface, a density equilibrium is reached within less than 3 ms of reactor operation. Decay times due to ozone formation after the reactor is turned off are on a similar scale. Spatially resolved measurements show that the oxygen density decreases exponentially from the surface but remains detectable up to approximately 1 mm above the surface, indicating significant application potential. Variations in the O2 admixture show a density maximum at 0.4%, confirming previous helium state enhanced actinometry measurements within the cavities.
- Open Access
- 1 November 2024
- Published by IOP Publishing in Plasma Sources Science and Technology
- Vol. 33 (11) , 11LT01
Energy efficiency of reactive species generation in radio frequency atmospheric pressure plasma jets driven by tailored voltage waveforms in a He/O2 mixture
The effect of the shape of the applied voltage waveform on the energy efficiency of reactive species generation is investigated in an atmospheric pressure RF microplasma jet operated in a He/O2 mixture (99.5%/0.5%) based on a one-dimensional hybrid fluid-kinetic simulation method. Using a tailored waveform synthesized from four consecutive harmonics (with a base frequency of f b = 13.56 MHz and amplitudes of ( 160 / k ) V for the k-th harmonic), it is shown that by changing the identical phases of the even harmonics in the waveform, ϕ, the generation efficiencies of three specific reactive species (helium metastables, atomic and vibrationally excited oxygen), defined as the ratio of mean density and input plasma power, attain their maxima for different values of ϕ, due to changes in the Electron Energy Probability Function (EEPF). The phase control of the EEPF and its critical role in modulating generation energy efficiencies are explained in detail. The simulation results are verified by experimental (Phase Resolved Optical Emission Spectroscopy and Two Photon Absorption Laser Induced Fluorescence) data.
- 1 November 2024
- Published by IOP Publishing in Plasma Sources Science and Technology
- Vol. 33 (11) , 11LT01
Open AccessEnergy efficiency of reactive species generation in radio frequency atmospheric pressure plasma jets driven by tailored voltage waveforms in a He/O2 mixture
The effect of the shape of the applied voltage waveform on the energy efficiency of reactive species generation is investigated in an atmospheric pressure RF microplasma jet operated in a He/O2 mixture (99.5%/0.5%) based on a one-dimensional hybrid fluid-kinetic simulation method. Using a tailored waveform synthesized from four consecutive harmonics (with a base frequency of f b = 13.56 MHz and amplitudes of ( 160 / k ) V for the k-th harmonic), it is shown that by changing the identical phases of the even harmonics in the waveform, ϕ, the generation efficiencies of three specific reactive species (helium metastables, atomic and vibrationally excited oxygen), defined as the ratio of mean density and input plasma power, attain their maxima for different values of ϕ, due to changes in the Electron Energy Probability Function (EEPF). The phase control of the EEPF and its critical role in modulating generation energy efficiencies are explained in detail. The simulation results are verified by experimental (Phase Resolved Optical Emission Spectroscopy and Two Photon Absorption Laser Induced Fluorescence) data.
- Open Access
- 1 October 2024
- Published by IOP Publishing in Plasma Sources Science and Technology
- Vol. 33 (10) , 105022
Novel methods for determination and manipulation of surface charges performed on an atmospheric DBD microplasma
In photo- and electrocatalysis it is already well-established that surface charges can alter chemical adsorption and reaction paths of the catalyst. However, the novel realm of plasma catalysis lacks experimental exploration regarding the impact of plasma-induced surface charges on catalytic processes. This paper paves the way by introducing a straightforward method for precisely charging the dielectric (catalyst) in a dielectric barrier discharge microplasma at atmospheric pressure. It additionally enables the determination of this surface charge avoiding artifacts or volume charge interference. Through pre-charging of the dielectric, the charges’ impacts on re-ignition and forming of charge equilibria during the discharge are investigated. Moreover, a laser-assisted operando technique is introduced to generate up to 15% of either positive or negative additional surface charges (compared to the default operation) within 3.5 μs after irradiation and potential for even higher yields. The charges’ origin and the plasma’s response to these laser-induced surface charges are explored.
- 1 October 2024
- Published by IOP Publishing in Plasma Sources Science and Technology
- Vol. 33 (10) , 105022
Open AccessNovel methods for determination and manipulation of surface charges performed on an atmospheric DBD microplasma
In photo- and electrocatalysis it is already well-established that surface charges can alter chemical adsorption and reaction paths of the catalyst. However, the novel realm of plasma catalysis lacks experimental exploration regarding the impact of plasma-induced surface charges on catalytic processes. This paper paves the way by introducing a straightforward method for precisely charging the dielectric (catalyst) in a dielectric barrier discharge microplasma at atmospheric pressure. It additionally enables the determination of this surface charge avoiding artifacts or volume charge interference. Through pre-charging of the dielectric, the charges’ impacts on re-ignition and forming of charge equilibria during the discharge are investigated. Moreover, a laser-assisted operando technique is introduced to generate up to 15% of either positive or negative additional surface charges (compared to the default operation) within 3.5 μs after irradiation and potential for even higher yields. The charges’ origin and the plasma’s response to these laser-induced surface charges are explored.
- Open Access
- 1 October 2024
- Published by IOP Publishing in Plasma Sources Science and Technology
- Vol. 33 (10) , 105008
Electric field components within a micro-scaled DBD measured by Stark shifting and splitting of helium lines
Atmospheric pressure dielectric barrier discharges (DBDs), such as the micro cavity plasma array (MCPA), have emerged as promising technologies for the conversion of volatile gases. These conversion processes’ effectiveness can be enhanced by integrating catalytically active surfaces. To deepen the understanding of the plasma-catalyst interaction, it is crucial to study the transport dynamics of charged species to the catalytic surface, which, due to collisions with neutrals, also directly affects the transport of reactive species to the catalyst. Thereby the transport of the charged species is in particular influenced by the electric field perpendicular to the catalytic surface. However, experimental data on the component-wise electric field strength within SDBDs are rare. To address this issue, we performed polarized optical emission spectroscopy on the shifting and splitting of the allowed 492.19 nm (1D → 1P0) and forbidden 492.06 nm (1F0 → 1P0) helium line pair. This diagnostic approach requires a non-radially symmetric geometry, which leads to an adapted reactor design of the MCPA allowing the side-on observation of the discharge. The discharge operates in pure helium at atmospheric pressure, utilizing a triangular excitation voltage with a frequency of 15 kHz and an amplitude of 600 V. We performed phase-resolved measurements of the electric field components with a temporal resolution of 1 µs. Our results revealed an electric field strength of approximately 22 kV cm−1 for the component perpendicular to the dielectric surface, while the component parallel to the dielectric surface is about 5 kV cm−1 larger during the decreasing potential phase of the applied voltage.
- 1 October 2024
- Published by IOP Publishing in Plasma Sources Science and Technology
- Vol. 33 (10) , 105008
Open AccessElectric field components within a micro-scaled DBD measured by Stark shifting and splitting of helium lines
Atmospheric pressure dielectric barrier discharges (DBDs), such as the micro cavity plasma array (MCPA), have emerged as promising technologies for the conversion of volatile gases. These conversion processes’ effectiveness can be enhanced by integrating catalytically active surfaces. To deepen the understanding of the plasma-catalyst interaction, it is crucial to study the transport dynamics of charged species to the catalytic surface, which, due to collisions with neutrals, also directly affects the transport of reactive species to the catalyst. Thereby the transport of the charged species is in particular influenced by the electric field perpendicular to the catalytic surface. However, experimental data on the component-wise electric field strength within SDBDs are rare. To address this issue, we performed polarized optical emission spectroscopy on the shifting and splitting of the allowed 492.19 nm (1D → 1P0) and forbidden 492.06 nm (1F0 → 1P0) helium line pair. This diagnostic approach requires a non-radially symmetric geometry, which leads to an adapted reactor design of the MCPA allowing the side-on observation of the discharge. The discharge operates in pure helium at atmospheric pressure, utilizing a triangular excitation voltage with a frequency of 15 kHz and an amplitude of 600 V. We performed phase-resolved measurements of the electric field components with a temporal resolution of 1 µs. Our results revealed an electric field strength of approximately 22 kV cm−1 for the component perpendicular to the dielectric surface, while the component parallel to the dielectric surface is about 5 kV cm−1 larger during the decreasing potential phase of the applied voltage.