Jacek Lebiedź
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Jacek Lebiedź has a total of 29 co-authors. Here are the top co-authors by number of shared publications:
Krzysztof Mieloszyk
Gdansk University of Technology
3 shared publications- Adam Mazikowski
Gdańsk Univ. of Technology (Poland)
2 shared publications - Cezary Orłowski
WSB University
2 shared publications - Dorota Zarek
Gdansk University of Technology, Poland
2 shared publications - Jerzy Redlarski
Department of Intelligent Interactive Systems, Gdańsk University of Technology, Faculty of Electronics, Telecommunications and Informatics, Poland
2 shared publications Mateusz Kowalski
2 shared publications
Latest Publications
- Open Access
- 13 February 2026
- Published by MDPI AG in Sustainability
- Vol. 18 (4) , 1964
Immersive Training for Chemical Hazard Response: A Conceptual Model for Sustainable Development-Oriented Learning
The study aims to develop a conceptual model for immersive chemical hazard response training that explicitly addresses four core operational constraints: time pressure, uncertainty, teamwork, and procedural/psychomotor precision. The model responds to the need for collaborative and mistake-driven training approaches in high-risk contexts. A design-oriented, theory-informed approach is applied, combining the identification of training requirements characteristic of chemical hazard response and the formulation of core operational constraints shaping the training design with the specification of CAVE affordances, a four-dimensional instructional design framework (cognitive, emotional, social, and psychomotor), conceptual alignment of scenario components with selected Sustainable Development Goals (SDGs 3, 4, 11, and 16), and a preliminary expert-based content appraisal. Results are presented as a design-oriented outcome in the form of a conceptual framework, accompanied by an illustrative scenario-based instantiation and an expert-based content appraisal demonstrating internal coherence and practical plausibility (I-CVI = 0.80–1.00; S-CVI/Ave = 0.93). Conclusions indicate that the proposed model serves as a structured instructional and scenario-design reference for immersive chemical hazard response training, positioning CAVEs as pedagogically organised learning spaces rather than as standalone simulation technologies. Further implications relate to the transferability of the model to sustainability-oriented response training across other high-risk domains. Empirical evaluation of learning processes, performance outcomes, and transfer to operational practice is identified as a necessary next step for future research.
- 13 February 2026
- Published by MDPI AG in Sustainability
- Vol. 18 (4) , 1964
Open AccessImmersive Training for Chemical Hazard Response: A Conceptual Model for Sustainable Development-Oriented Learning
The study aims to develop a conceptual model for immersive chemical hazard response training that explicitly addresses four core operational constraints: time pressure, uncertainty, teamwork, and procedural/psychomotor precision. The model responds to the need for collaborative and mistake-driven training approaches in high-risk contexts. A design-oriented, theory-informed approach is applied, combining the identification of training requirements characteristic of chemical hazard response and the formulation of core operational constraints shaping the training design with the specification of CAVE affordances, a four-dimensional instructional design framework (cognitive, emotional, social, and psychomotor), conceptual alignment of scenario components with selected Sustainable Development Goals (SDGs 3, 4, 11, and 16), and a preliminary expert-based content appraisal. Results are presented as a design-oriented outcome in the form of a conceptual framework, accompanied by an illustrative scenario-based instantiation and an expert-based content appraisal demonstrating internal coherence and practical plausibility (I-CVI = 0.80–1.00; S-CVI/Ave = 0.93). Conclusions indicate that the proposed model serves as a structured instructional and scenario-design reference for immersive chemical hazard response training, positioning CAVEs as pedagogically organised learning spaces rather than as standalone simulation technologies. Further implications relate to the transferability of the model to sustainability-oriented response training across other high-risk domains. Empirical evaluation of learning processes, performance outcomes, and transfer to operational practice is identified as a necessary next step for future research.
- Open Access
- 17 November 2025
- Published by International Conference on Information Systems Development
Educational values of a virtual escape room in mathematics
The paper presents research on the increase in mathematical knowledge of students using a specially implemented, deeply immersive and highly engaging virtual escape room based on mathematical puzzles. It was built under the supervision of the authors for use in a CAVE-type installation in the Immersive 3D Visualization Lab at the Gdańsk University of Technology. The virtual escape room comprises an introductory room followed by three themed rooms with 13 puzzles total that involve mathematical thinking. To assess the educational impact of the escape room, an experiment was conducted with students starting their first year of technical studies. The experiment consisted of solving mathematical puzzles in the escape room by cooperative teams of 2-5 students, preceded and followed by satisfaction surveys and knowledge tests. Each group also participated in classroom lesson, some before visiting the escape room and others after. The greatest increase in knowledge was achieved for classroom lessons, followed by the escape room.
- 17 November 2025
- Published by International Conference on Information Systems Development
Open AccessEducational values of a virtual escape room in mathematics
The paper presents research on the increase in mathematical knowledge of students using a specially implemented, deeply immersive and highly engaging virtual escape room based on mathematical puzzles. It was built under the supervision of the authors for use in a CAVE-type installation in the Immersive 3D Visualization Lab at the Gdańsk University of Technology. The virtual escape room comprises an introductory room followed by three themed rooms with 13 puzzles total that involve mathematical thinking. To assess the educational impact of the escape room, an experiment was conducted with students starting their first year of technical studies. The experiment consisted of solving mathematical puzzles in the escape room by cooperative teams of 2-5 students, preceded and followed by satisfaction surveys and knowledge tests. Each group also participated in classroom lesson, some before visiting the escape room and others after. The greatest increase in knowledge was achieved for classroom lessons, followed by the escape room.
- Open Access
- 3 October 2024
- Published by Association for Computing Machinery (ACM)
- p. 1-9
Virtual fruition of architectural drawings
- 3 October 2024
- Published by Association for Computing Machinery (ACM)
- p. 1-9
Open AccessVirtual fruition of architectural drawings
- Open Access
- 9 September 2024
- Published by International Conference on Information Systems Development
Virtual Escape Room in Mathematics
The paper presents developing a virtual reality-based escape room to teach mathematical concepts. The goal was to create an immersive game to engage students in actively solving math puzzles. The research team built the application for use in the Immersive 3D Visualization Lab at the Gdańsk University of Technology. The escape room comprises an introductory room followed by three themed rooms with 13 puzzles total that involve mathematical thinking. To assess the tool’s educational impact, the team prepared surveys and planed an experiment with students. Key outcomes delivered were the completed application configured for the target lab, plus the surveys to quantitatively measure math comprehension before and after students use the escape room. Overall this project combined virtual reality and game design concepts to create an innovative approach for engaging students in learning math concepts in an interactive, visually stimulating setting.
- 9 September 2024
- Published by International Conference on Information Systems Development
Open AccessVirtual Escape Room in Mathematics
The paper presents developing a virtual reality-based escape room to teach mathematical concepts. The goal was to create an immersive game to engage students in actively solving math puzzles. The research team built the application for use in the Immersive 3D Visualization Lab at the Gdańsk University of Technology. The escape room comprises an introductory room followed by three themed rooms with 13 puzzles total that involve mathematical thinking. To assess the tool’s educational impact, the team prepared surveys and planed an experiment with students. Key outcomes delivered were the completed application configured for the target lab, plus the surveys to quantitatively measure math comprehension before and after students use the escape room. Overall this project combined virtual reality and game design concepts to create an innovative approach for engaging students in learning math concepts in an interactive, visually stimulating setting.
- Open Access
- 9 September 2024
- Published by International Conference on Information Systems Development
Immersion in Virtual Reality: CAVE Automatic Virtual Environments vs. Head-Mounted Displays
The paper describes immersive capabilities of CAVE Automatic Virtual Environment and Head-Mounted Display. An important aspect of this research was to develop a method for quantifying user immersion in both systems. Two virtual reality applications, "Flat of Negative Emotions" and "Arachnophobia Treatment Support" were used to observe and analyze user reactions and engagement levels. Participants were exposed to these applica¬tions in both environments, allowing for a comparative analysis of the technologies. The methodology incorporated surveys, observation forms, and direct interaction analysis, combining qualitative and quantitative data for a comprehensive evaluation of both sys¬tems. The study involved 124 participants from varied backgrounds. The paper presents the objectives, methodology, and findings, with a focus on comparing the immersion levels in CAVE and HMD settings. The results contribute to the academic discourse in virtual reality and human-computer interaction, offering methodological advancements in measuring immersion and guiding future research in immersive technology.
- 9 September 2024
- Published by International Conference on Information Systems Development
Open AccessImmersion in Virtual Reality: CAVE Automatic Virtual Environments vs. Head-Mounted Displays
The paper describes immersive capabilities of CAVE Automatic Virtual Environment and Head-Mounted Display. An important aspect of this research was to develop a method for quantifying user immersion in both systems. Two virtual reality applications, "Flat of Negative Emotions" and "Arachnophobia Treatment Support" were used to observe and analyze user reactions and engagement levels. Participants were exposed to these applica¬tions in both environments, allowing for a comparative analysis of the technologies. The methodology incorporated surveys, observation forms, and direct interaction analysis, combining qualitative and quantitative data for a comprehensive evaluation of both sys¬tems. The study involved 124 participants from varied backgrounds. The paper presents the objectives, methodology, and findings, with a focus on comparing the immersion levels in CAVE and HMD settings. The results contribute to the academic discourse in virtual reality and human-computer interaction, offering methodological advancements in measuring immersion and guiding future research in immersive technology.
- Open Access
Eventual Convergence of the Reputation-Based Algorithm in IoT Sensor Networks
Uncertainty in dense heterogeneous IoT sensor networks can be decreased by applying reputation-inspired algorithms, such as the EWMA (Exponentially Weighted Moving Average) algorithm, which is widely used in social networks. Despite its popularity, the eventual convergence of this algorithm for the purpose of IoT networks has not been widely studied, and results of simulations are often taken in lieu of the more rigorous proof. Therefore the question remains, whether under stable conditions, in realistic situations found in IoT networks, this algorithm indeed converges. This paper demonstrates proof of the eventual convergence of the EWMA algorithm. The proof consists of two steps: it models the sensor network as the UOG (Uniform Opinion Graph) that enables the analytical approach to the problem, and then offers the mathematical proof of eventual convergence, using formalizations identified in the previous step. The paper demonstrates that the EWMA algorithm converges under all realistic conditions.
Open AccessEventual Convergence of the Reputation-Based Algorithm in IoT Sensor Networks
Uncertainty in dense heterogeneous IoT sensor networks can be decreased by applying reputation-inspired algorithms, such as the EWMA (Exponentially Weighted Moving Average) algorithm, which is widely used in social networks. Despite its popularity, the eventual convergence of this algorithm for the purpose of IoT networks has not been widely studied, and results of simulations are often taken in lieu of the more rigorous proof. Therefore the question remains, whether under stable conditions, in realistic situations found in IoT networks, this algorithm indeed converges. This paper demonstrates proof of the eventual convergence of the EWMA algorithm. The proof consists of two steps: it models the sensor network as the UOG (Uniform Opinion Graph) that enables the analytical approach to the problem, and then offers the mathematical proof of eventual convergence, using formalizations identified in the previous step. The paper demonstrates that the EWMA algorithm converges under all realistic conditions.
- Open Access
- 24 August 2021
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Human-Machine Systems
- Vol. 51 (5) , 535-543
Multiuser Stereoscopic Projection Techniques for CAVE-Type Virtual Reality Systems
Despite the development of increasingly popular head mounted displays, CAVE-type systems may still be considered one of the most immersive virtual reality systems with many advantages. However, a serious limitation of most CAVE-type systems is the generation of a three-dimensional (3-D) image from the perspective of only one person. This problem is significant because in some applications, the participants must cooperate with each other in the virtual world. This paper presents the adaptation of a one-user Cave Automatic Virtual Environment (CAVE) installation in the Immersive 3-D Visualization Lab at the Gdańsk University of Technology to a two-user stereoscopy system. Simultaneous use of two alternative one-user stereoscopies available in the I3DVL (a technique with spectrum separation—Infitec, and active stereo) and a simple electronic circuit have allowed us to transform the one-user stereoscopy CAVE installation to a two-user stereoscopic system. The experiments performed concentrated on several objective measurable parameters. The calculated crosstalk value was low, approximately 1%, which can be considered negligible and shows the proper operation of the proposed technique. Additionally, initial experiments based on the tested two-user application and related to user comfort in the developed two-user stereoscopy are discussed in this paper. However, this topic still needs further research. The proposed solutions are a cheap alternative to adapt the existing one-user CAVE-type systems which support two projection techniques to a two-user system.
- 24 August 2021
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Human-Machine Systems
- Vol. 51 (5) , 535-543
Open AccessMultiuser Stereoscopic Projection Techniques for CAVE-Type Virtual Reality Systems
Despite the development of increasingly popular head mounted displays, CAVE-type systems may still be considered one of the most immersive virtual reality systems with many advantages. However, a serious limitation of most CAVE-type systems is the generation of a three-dimensional (3-D) image from the perspective of only one person. This problem is significant because in some applications, the participants must cooperate with each other in the virtual world. This paper presents the adaptation of a one-user Cave Automatic Virtual Environment (CAVE) installation in the Immersive 3-D Visualization Lab at the Gdańsk University of Technology to a two-user stereoscopy system. Simultaneous use of two alternative one-user stereoscopies available in the I3DVL (a technique with spectrum separation—Infitec, and active stereo) and a simple electronic circuit have allowed us to transform the one-user stereoscopy CAVE installation to a two-user stereoscopic system. The experiments performed concentrated on several objective measurable parameters. The calculated crosstalk value was low, approximately 1%, which can be considered negligible and shows the proper operation of the proposed technique. Additionally, initial experiments based on the tested two-user application and related to user comfort in the developed two-user stereoscopy are discussed in this paper. However, this topic still needs further research. The proposed solutions are a cheap alternative to adapt the existing one-user CAVE-type systems which support two projection techniques to a two-user system.
- Open Access
Trust-Based Model for the Assessment of the Uncertainty of Measurements in Hybrid IoT Networks
The aim of this paper is to introduce a NUT model (NUT: network-uncertainty-trust) that aids the decrease of the uncertainty of measurements in autonomous hybrid Internet of Things sensor networks. The problem of uncertainty in such networks is a consequence of various operating conditions and varied quality of measurement nodes, making statistical approach less successful. This paper presents a model for decreasing the uncertainty through the use of socially inspired metaphors of reputation, trust, and confidence that are the untapped latent information. The model described in the paper shows how the individual reputation of each node can be assessed on the basis of opinions provided by other nodes of the hybrid measurement network, and that this method allows to assess the extent of uncertainty the node introduces to the network. This, in turn, allows nodes of low uncertainty to have a greater impact on the reconstruction of values. The verification of the model, as well as examples of its applicability to air quality measurements are presented as well. Simulations demonstrate that the use of the model can decrease the uncertainty by up to 55% while using the EWMA (exponentially weighted moving average) algorithm, as compared to the reference one.
Open AccessTrust-Based Model for the Assessment of the Uncertainty of Measurements in Hybrid IoT Networks
The aim of this paper is to introduce a NUT model (NUT: network-uncertainty-trust) that aids the decrease of the uncertainty of measurements in autonomous hybrid Internet of Things sensor networks. The problem of uncertainty in such networks is a consequence of various operating conditions and varied quality of measurement nodes, making statistical approach less successful. This paper presents a model for decreasing the uncertainty through the use of socially inspired metaphors of reputation, trust, and confidence that are the untapped latent information. The model described in the paper shows how the individual reputation of each node can be assessed on the basis of opinions provided by other nodes of the hybrid measurement network, and that this method allows to assess the extent of uncertainty the node introduces to the network. This, in turn, allows nodes of low uncertainty to have a greater impact on the reconstruction of values. The verification of the model, as well as examples of its applicability to air quality measurements are presented as well. Simulations demonstrate that the use of the model can decrease the uncertainty by up to 55% while using the EWMA (exponentially weighted moving average) algorithm, as compared to the reference one.
- Open Access
- 11 February 2020
- Published by Association for Computing Machinery (ACM)
- p. 144-148
Factors Affecting the Effectiveness of Military Training in Virtual Reality Environment
In this paper, we explored the factors influencing the effectiveness of military trainings performed in a virtual reality environment. The rationale for taking up the topic is the fact that such trainings are often conducted under specific operational procedures. These procedures may create rigorous frameworks for all elements of the learning environment, including the teacher's performance. Therefore, to ensure the most conducive conditions of training and, thus, its effectiveness, it is necessary to identify critical factors to be taken into account while designing the training process. On the basis of literature review, we selected, analysed, and categorized the most relevant factors concerning the learner, the teacher, as well as didactic tools and the content. We limited our considerations to the learning environment and the teaching process. We did not explore the organizational level. Another implication concerns the development of a tool for training effectiveness assessment based on the identified factors.
- 11 February 2020
- Published by Association for Computing Machinery (ACM)
- p. 144-148
Open AccessFactors Affecting the Effectiveness of Military Training in Virtual Reality Environment
In this paper, we explored the factors influencing the effectiveness of military trainings performed in a virtual reality environment. The rationale for taking up the topic is the fact that such trainings are often conducted under specific operational procedures. These procedures may create rigorous frameworks for all elements of the learning environment, including the teacher's performance. Therefore, to ensure the most conducive conditions of training and, thus, its effectiveness, it is necessary to identify critical factors to be taken into account while designing the training process. On the basis of literature review, we selected, analysed, and categorized the most relevant factors concerning the learner, the teacher, as well as didactic tools and the content. We limited our considerations to the learning environment and the teaching process. We did not explore the organizational level. Another implication concerns the development of a tool for training effectiveness assessment based on the identified factors.
- Open Access
- 7 January 2020
- Published by Association for Computing Machinery (ACM)
- p. 1-5
To Survive in a CBRN Hostile Environment
- 7 January 2020
- Published by Association for Computing Machinery (ACM)
- p. 1-5
Open AccessTo Survive in a CBRN Hostile Environment