Anita Cecilia Ríos
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Anita Cecilia Ríos has a total of 22 co-authors. Here are the top co-authors by number of shared publications:
- Carmen Omaira Márquez
Faculty of Engineering, National University of Chimborazo, Riobamba, Ecuador
3 shared publications - Fernando Millán
Ingeniería Química, Instituto Universitario Politécnico “Santiago Mariño”, Mérida 5101, Venezuela
3 shared publications - Jose PRATO
Grupo de Investigación: Estudios Interdisciplinarios, Facultad de Ingeniería, Universidad Nacional de Chimborazo, Av. Antonio José de Sucre km 1½ vía Guano, Riobamba 060103, Ecuador
3 shared publications - Victor Julio García
Facultad de Ingeniería, Carrera de Ingeniería Civil, Universidad Nacional de Chimborazo, Riobamba EC060108, Ecuador
3 shared publications - Luisa Carolina González Ramírez
Grupo de Investigación “Análisis de Muestras Biológicas y Forenses”, Laboratorio Clínico, Facultad de Ciencias de la Salud, Universidad Nacional de Chimborazo, Av. Antonio José de Sucre km 1½ vía Guano, Riobamba 060103, Ecuador
2 shared publications - Andrés Márquez
Instituto de Investigación, Facultad de Farmacia y Bioanálisis, Universidad de Los Andes, Mérida 5101, Venezuela
1 shared publication
Latest Publications
- Open Access
- 10 September 2024
- Published by MDPI AG in Sustainability
- Vol. 16 (18) , 7902
Chemical and Physical Characterization of Three Oxidic Lithological Materials for Water Treatment
Water treatment necessitates the sustainable use of natural resources. This paper focuses on the characterization of three oxidic lithological materials (OLMs) with the aim of utilizing them to prepare calcined adsorbent substrates for ionic adsorption. The three materials have pH levels of 7.66, 4.63, and 6.57, respectively, and organic matter contents less than 0.5%. All of the materials are sandy loam or loamy sand. Their electric conductivities (0.18, 0.07, and 0.23 dS/m) show low levels of salinity and solubility. Their CEC (13.40, 13.77, and 6.76 cmol(+)kg) values are low, similar to those of amphoteric oxides and kaolin clays. Their aluminum contents range from 7% up to 12%, their iron contents range from 3% up to 7%, their titanium contents range from 0.3% to 0.63%, and their manganese contents range from 0.007% up to 0.033%. The amphoteric oxides of these metals are responsible for their ionic adsorption reactions due to their variable charge surfaces. Their zirconium concentrations range from 100 to 600 mg/g, giving these materials the refractory properties necessary for the preparation of calcined adsorbent substrates. Our XRD analysis shows they share a common mineralogical composition, with quartz as the principal component, as well as albite, which leads to their thermal properties and mechanical resistance against abrasion. The TDA and IR spectra show the presence of kaolinite, which is lost during thermal treatments. The results show that the OLMs might have potential as raw materials to prepare calcined adsorbent substrates for further applications and as granular media in the sustainable treatment of both natural water and wastewater.
- 10 September 2024
- Published by MDPI AG in Sustainability
- Vol. 16 (18) , 7902
Open AccessChemical and Physical Characterization of Three Oxidic Lithological Materials for Water Treatment
Water treatment necessitates the sustainable use of natural resources. This paper focuses on the characterization of three oxidic lithological materials (OLMs) with the aim of utilizing them to prepare calcined adsorbent substrates for ionic adsorption. The three materials have pH levels of 7.66, 4.63, and 6.57, respectively, and organic matter contents less than 0.5%. All of the materials are sandy loam or loamy sand. Their electric conductivities (0.18, 0.07, and 0.23 dS/m) show low levels of salinity and solubility. Their CEC (13.40, 13.77, and 6.76 cmol(+)kg) values are low, similar to those of amphoteric oxides and kaolin clays. Their aluminum contents range from 7% up to 12%, their iron contents range from 3% up to 7%, their titanium contents range from 0.3% to 0.63%, and their manganese contents range from 0.007% up to 0.033%. The amphoteric oxides of these metals are responsible for their ionic adsorption reactions due to their variable charge surfaces. Their zirconium concentrations range from 100 to 600 mg/g, giving these materials the refractory properties necessary for the preparation of calcined adsorbent substrates. Our XRD analysis shows they share a common mineralogical composition, with quartz as the principal component, as well as albite, which leads to their thermal properties and mechanical resistance against abrasion. The TDA and IR spectra show the presence of kaolinite, which is lost during thermal treatments. The results show that the OLMs might have potential as raw materials to prepare calcined adsorbent substrates for further applications and as granular media in the sustainable treatment of both natural water and wastewater.
- Open Access
Water Quality Indicator for Adaptability to Global Climate Change in Andean Highland Ecosystems
In the face of ongoing anthropogenic climate change, river water quality assessment has become increasingly important for maintaining ecological balance and supporting local and downstream livelihoods. This research aims to create a new water quality index (WQI) to assess water quality in the Andean highlands (>2000 m.a.s.l.) for climate change adaptation and mitigation. We examined water physicochemical and bacteriological parameters and the benthic macroinvertebrate (BM) community in three micro-watersheds in Achupallas, Ecuador, to achieve our goal. We analyzed water quality at 41 sampling points, and samples (replicates) were taken for nine consecutive months. In addition, we evaluated the accuracy of the WQI developed by the U.S. National Sanitation Foundation (NSF) in 1970 (WQINSF). The BM community in the Andes highlands was used to develop and calibrate a new WQI, the Andean Biotic Index* (ABI*). We calibrated the ABI* taxon score in the area where the WQINSF made the most accurate water quality measurements. Our results show that the sigma value framework quantifies WQINSF accuracy. Therefore, a higher sigma value means we measured water quality more accurately. There was no correlation between the WQINSF and the Andean Biotic Index (ABI). The ABI* considers the presence of BMs and their sensitivity to pollution to measure water quality. The results also show a strong statistical link between the ABI* and the WQINSF. The ABI* can aid mountain communities in adjusting to climate change. Mountain dwellers can monitor a stream’s water quality by observing the BM communities. However, the ABI* is not a substitute for the WQINSF or biological studies.
Open AccessWater Quality Indicator for Adaptability to Global Climate Change in Andean Highland Ecosystems
In the face of ongoing anthropogenic climate change, river water quality assessment has become increasingly important for maintaining ecological balance and supporting local and downstream livelihoods. This research aims to create a new water quality index (WQI) to assess water quality in the Andean highlands (>2000 m.a.s.l.) for climate change adaptation and mitigation. We examined water physicochemical and bacteriological parameters and the benthic macroinvertebrate (BM) community in three micro-watersheds in Achupallas, Ecuador, to achieve our goal. We analyzed water quality at 41 sampling points, and samples (replicates) were taken for nine consecutive months. In addition, we evaluated the accuracy of the WQI developed by the U.S. National Sanitation Foundation (NSF) in 1970 (WQINSF). The BM community in the Andes highlands was used to develop and calibrate a new WQI, the Andean Biotic Index* (ABI*). We calibrated the ABI* taxon score in the area where the WQINSF made the most accurate water quality measurements. Our results show that the sigma value framework quantifies WQINSF accuracy. Therefore, a higher sigma value means we measured water quality more accurately. There was no correlation between the WQINSF and the Andean Biotic Index (ABI). The ABI* considers the presence of BMs and their sensitivity to pollution to measure water quality. The results also show a strong statistical link between the ABI* and the WQINSF. The ABI* can aid mountain communities in adjusting to climate change. Mountain dwellers can monitor a stream’s water quality by observing the BM communities. However, the ABI* is not a substitute for the WQINSF or biological studies.
- Open Access
Adsorption of Phosphate and Nitrate Ions on Oxidic Substrates Prepared with a Variable-Charge Lithological Material
This work evaluates phosphate and nitrate ion adsorption from aqueous solutions on calcined adsorbent substrates of variable charge, prepared from three granulometric fractions of an oxidic lithological material. The adsorbent material was chemically characterized, and N2 gas adsorption (BET), X-ray diffraction, and DTA techniques were applied. The experimental conditions included the protonation of the beds with HCl and H2SO4 and the study of adsorption isotherms and kinetics. The lithological material was moderately acidic (pH 5) with very little solubility (electrical conductivity 0.013 dS m−1) and a low cation exchange capacity (53.67 cmol (+) kg−1). The protonation reaction was more efficient with HCl averaging 0.745 mmol versus 0.306 mmol with H2SO4. Likewise, the HCl-treated bed showed a better adsorption of PO4−3 ions (3.296 mg/100 g bed) compared to the H2SO4-treated bed (2.579 mg/100 g bed). The isotherms showed great affinity of the PO4−3 ions with the oxide surface, and the data fit satisfactorily to the Freundlich model, suggesting a specific type of adsorption, confirmed by the pseudo-second-order kinetic model. In contrast, the nitrate ions showed no affinity for the substrate (89.7 µg/100 g for the HCl-treated bed and 29.3 µg/100 g bed for the H2SO4-treated bed). Amphoteric iron and aluminum oxides of variable charges present in the lithological material studied allow for their use as adsorbent beds as an alternative technique to eliminate phosphates and other ions dissolved in natural water.
Open AccessAdsorption of Phosphate and Nitrate Ions on Oxidic Substrates Prepared with a Variable-Charge Lithological Material
This work evaluates phosphate and nitrate ion adsorption from aqueous solutions on calcined adsorbent substrates of variable charge, prepared from three granulometric fractions of an oxidic lithological material. The adsorbent material was chemically characterized, and N2 gas adsorption (BET), X-ray diffraction, and DTA techniques were applied. The experimental conditions included the protonation of the beds with HCl and H2SO4 and the study of adsorption isotherms and kinetics. The lithological material was moderately acidic (pH 5) with very little solubility (electrical conductivity 0.013 dS m−1) and a low cation exchange capacity (53.67 cmol (+) kg−1). The protonation reaction was more efficient with HCl averaging 0.745 mmol versus 0.306 mmol with H2SO4. Likewise, the HCl-treated bed showed a better adsorption of PO4−3 ions (3.296 mg/100 g bed) compared to the H2SO4-treated bed (2.579 mg/100 g bed). The isotherms showed great affinity of the PO4−3 ions with the oxide surface, and the data fit satisfactorily to the Freundlich model, suggesting a specific type of adsorption, confirmed by the pseudo-second-order kinetic model. In contrast, the nitrate ions showed no affinity for the substrate (89.7 µg/100 g for the HCl-treated bed and 29.3 µg/100 g bed for the H2SO4-treated bed). Amphoteric iron and aluminum oxides of variable charges present in the lithological material studied allow for their use as adsorbent beds as an alternative technique to eliminate phosphates and other ions dissolved in natural water.
- Open Access
- 1 April 2022
- Published by SciELO Agencia Nacional de Investigacion y Desarrollo (ANID) in Información tecnológica
- Vol. 33 (2) , 145-156
Uso de materiales litológicos oxídicos para la reducción de la dureza en aguas naturales
El objetivo de este estudio fue determinar la reducción de dureza en aguas naturales utilizando lechos de carga variable preparados a partir de dos materiales litológicos oxídicos (MLO), denominados “Material C” y “Material L”, que fueron recolectados de depósitos naturales en Venezuela. Las pruebas de adsorción se realizaron con lechos naturales activados con NaOH. Los resultados revelaron la presencia de óxidos anfóteros de hierro, silicio y aluminio en su estructura. Experimentos de columna muestran una capacidad de retención de 12.51 y 11.02 mgCaCO3/kg para los lechos L y C, respectivamente. La activación incrementa 2.5 veces el rendimiento del proceso, 29.28 mgCa2+/kg Material L y 26.94 mgCa2+/kg para el Material C, debido al aumento de la densidad de cargas negativas superficiales. La adsorción es de tipo no específico y los datos se ajustan al modelo de Freundlich. Se concluye que los materiales evaluados representan una excelente alternativa en el tratamiento de la dureza del agua.
- 1 April 2022
- Published by SciELO Agencia Nacional de Investigacion y Desarrollo (ANID) in Información tecnológica
- Vol. 33 (2) , 145-156
Open AccessUso de materiales litológicos oxídicos para la reducción de la dureza en aguas naturales
El objetivo de este estudio fue determinar la reducción de dureza en aguas naturales utilizando lechos de carga variable preparados a partir de dos materiales litológicos oxídicos (MLO), denominados “Material C” y “Material L”, que fueron recolectados de depósitos naturales en Venezuela. Las pruebas de adsorción se realizaron con lechos naturales activados con NaOH. Los resultados revelaron la presencia de óxidos anfóteros de hierro, silicio y aluminio en su estructura. Experimentos de columna muestran una capacidad de retención de 12.51 y 11.02 mgCaCO3/kg para los lechos L y C, respectivamente. La activación incrementa 2.5 veces el rendimiento del proceso, 29.28 mgCa2+/kg Material L y 26.94 mgCa2+/kg para el Material C, debido al aumento de la densidad de cargas negativas superficiales. La adsorción es de tipo no específico y los datos se ajustan al modelo de Freundlich. Se concluye que los materiales evaluados representan una excelente alternativa en el tratamiento de la dureza del agua.
- Open Access
- 31 May 2021
- Published by MDPI AG in Applied Sciences
- Vol. 11 (11) , 5127
Cationic and Anionic Dye Adsorption on a Natural Clayey Composite
One of the main challenges for environmental sciences today is the effective treatment of dye-laden industrial effluents. This work aimed to study the potential of an untreated (natural occurring clayey composite) red clay (RC) for the adsorption of a cationic dye Basic Navy Blue 2RN (CNB) and anionic dye Drimaren Yellow CL-2R (ADY). We evaluated the effect of pH, dye concentration, and adsorbent concentration on the removal effectiveness to study the absorption process. Also, we studied the adsorption process by analyzing the feasibility of several known adsorption isotherms and kinetic models. The results show that at a pH of less than 4, the CNB and ADY removal percentages were 97% and 96%, respectively. At a pH greater than 8, the CNB and ADY removals were 75% and 25%, respectively. The CNB adsorption happened by chemisorption of a monolayer on iron-containing particles (IPs). In congtrast, the ADY adsorption occurred by monolayer physisorption on kaolinite particles (KPs) and Na, K-rich Laumontite particles (LPs). The Langmuir isotherm model fits very well with CNB experimental data. The Temkin model shows the best fit between the isotherm function and the ADY dye-adsorption data. The pseudo-second-order kinetic model fits the CNB and ADY dye-adsorption data on RC particles. The heterogeneous composition of naturally occurring clay favors different adsorption mechanisms and opens an avenue for the separation process’s engineering.
- 31 May 2021
- Published by MDPI AG in Applied Sciences
- Vol. 11 (11) , 5127
Open AccessCationic and Anionic Dye Adsorption on a Natural Clayey Composite
One of the main challenges for environmental sciences today is the effective treatment of dye-laden industrial effluents. This work aimed to study the potential of an untreated (natural occurring clayey composite) red clay (RC) for the adsorption of a cationic dye Basic Navy Blue 2RN (CNB) and anionic dye Drimaren Yellow CL-2R (ADY). We evaluated the effect of pH, dye concentration, and adsorbent concentration on the removal effectiveness to study the absorption process. Also, we studied the adsorption process by analyzing the feasibility of several known adsorption isotherms and kinetic models. The results show that at a pH of less than 4, the CNB and ADY removal percentages were 97% and 96%, respectively. At a pH greater than 8, the CNB and ADY removals were 75% and 25%, respectively. The CNB adsorption happened by chemisorption of a monolayer on iron-containing particles (IPs). In congtrast, the ADY adsorption occurred by monolayer physisorption on kaolinite particles (KPs) and Na, K-rich Laumontite particles (LPs). The Langmuir isotherm model fits very well with CNB experimental data. The Temkin model shows the best fit between the isotherm function and the ADY dye-adsorption data. The pseudo-second-order kinetic model fits the CNB and ADY dye-adsorption data on RC particles. The heterogeneous composition of naturally occurring clay favors different adsorption mechanisms and opens an avenue for the separation process’s engineering.
- Open Access
Páramo Ecosystems in Ecuador’s Southern Region: Conservation State and Restoration
The páramo is home to a significant proportion of global biodiversity and provides essential services for the development of life for millions of people in Ecuador. However, land use/land cover (LULC) changes threaten biodiversity and modify its functioning. The objectives of this study were: (1) to evaluate the conservation status of the herbaceous páramo (HP) ecosystem by analyzing its LULC in Ecuador’s southern region. (2) to identify possible regions where the native páramo ecosystem is being restored. We analyzed Landsat 8 images using Object-Based Image Analysis (OBIA) and a Classifier Decision Tree (CDT) to achieve these objectives. The results show that the native herbaceous páramo (NHP) ecosystem is being transformed into an anthropogenic HP (AHP). The area covered by the NHP ecosystem (296,964 ha) has been reduced by 50% (149,834 ha). Nevertheless, we identified five regions where the NHP is upgrading. These regions are relevant for studying NHP regeneration in Ecuador’s southern region, where soils are mostly andosols. The LU of the páramo, with cycles of exploitation, abandonment, and regeneration in a secondary páramo, is transforming the NHP ecosystem. These exploitation practices, global climate change, and lack of knowledge about the NHP ecosystem’s regeneration and its soils’ recovery threaten to substantially reduce the NHP area, its functionality, and its ecosystem services.
Open AccessPáramo Ecosystems in Ecuador’s Southern Region: Conservation State and Restoration
The páramo is home to a significant proportion of global biodiversity and provides essential services for the development of life for millions of people in Ecuador. However, land use/land cover (LULC) changes threaten biodiversity and modify its functioning. The objectives of this study were: (1) to evaluate the conservation status of the herbaceous páramo (HP) ecosystem by analyzing its LULC in Ecuador’s southern region. (2) to identify possible regions where the native páramo ecosystem is being restored. We analyzed Landsat 8 images using Object-Based Image Analysis (OBIA) and a Classifier Decision Tree (CDT) to achieve these objectives. The results show that the native herbaceous páramo (NHP) ecosystem is being transformed into an anthropogenic HP (AHP). The area covered by the NHP ecosystem (296,964 ha) has been reduced by 50% (149,834 ha). Nevertheless, we identified five regions where the NHP is upgrading. These regions are relevant for studying NHP regeneration in Ecuador’s southern region, where soils are mostly andosols. The LU of the páramo, with cycles of exploitation, abandonment, and regeneration in a secondary páramo, is transforming the NHP ecosystem. These exploitation practices, global climate change, and lack of knowledge about the NHP ecosystem’s regeneration and its soils’ recovery threaten to substantially reduce the NHP area, its functionality, and its ecosystem services.