Aleksander Vasilievich Voronin
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Aleksander Vasilievich Voronin has a total of 28 co-authors. Here are the top co-authors by number of shared publications:
- Maksim Nikolaevich Kachalkin
Самарский государственный медицинский университет
4 shared publications - Alexander V. Karpov
Samara State Medical University
2 shared publications - A. Karpov
Samara State Medical University of the Ministry of Healthcare of the Russian Federation; 89 Chapaevskaya Street, Samara, 443099, Russian Federation
1 shared publication - Alexander V. Karpov
Samara State Medical University
1 shared publication - Anatolii V. Tolstov
Samara State Medical University
1 shared publication Andrey Germanov
Samara State Med Univ, Samara, Russia
1 shared publication
Latest Publications
- 28 November 2025
- Published by Academy of International Scientific Cooperation in "Medical & Pharmaceutical Journal "Pulse"
- Vol. 27 (12)
DEVELOPMENT AND VALIDATION METHOD FOR THE QUANTATIVE DETERMINATION OF CAFFEINE-SODIUM BENZOATE BY FOURIER TRANSFORM INFRARED SPECTROMETRY
Relevance. The article presents a method for the quantitative determination of caffeine-sodium benzoate by infrared Fourier transform spectrometry in the mode of disturbed total internal reflection. The research is aimed at developing an algorithm for the quantitative determination and validation of the method of caffeine-sodium benzoate in solid multicomponent mixtures by Fourier transform IR spectrometry. Aim. Development of an algorithm for the quantitative determination and validation of the method of caffeine-sodium benzoate in solid multicomponent mixtures by Fourier transform IR spectrometry. Materials and Methods. The study was conducted on a model mixture of tablet mass reproducing the composition of Citramon P 500 mg tablets (JSC Pharmstandard-Lexredstva). 30 calibration and 20 control samples were prepared by mixing the substance of caffeine-sodium benzoate with a mixture of auxiliary substances. IR spectra were recorded on a Cary 630 FTIR spectrometer (Agilent, USA) in the range of 4000-650 cm⁻1 (resolution 4 cm⁻1). The data was processed in KNIME 4.5.7 using the Python 3.9.10 package and the scikit-learn 1.3.0 library. Processing stages: normalization, separation of spectrometric data into training/test samples (in a 70:30 ratio according to the Kennard-Stone method), using the optimal configuration of automated preprocessing from a combination of 4 options, using a cascade of models consisting of 6 processing options with automated selection of the best combination of results, obtaining a mathematical (calibration) model, verification of the predictive ability of the model on a test sample, approbation of the model on control samples, validation of the analytical methodology. Results. The coefficient of determination r2 of the mathematical model when analyzing a test sample of spectrometric data was 0.99, which confirms its high predictive ability. When tested on control samples of a mixture similar to the composition of Citramon P tablets, the relative deviation of the calculated concentration from the actual concentration did not exceed ± 0.98%. Conclusions. An algorithm for the quantitative determination of caffeine-sodium benzoate in solid multicomponent mixtures by IR Fourier spectrometry in the mode of disturbed total internal reflection has been developed and tested. The value of the relative deviation ± 0.98% in a wide range of concentrations indicates the applicability of the algorithm. The validation procedure of the analytical methodology has shown that this methodology meets the criteria for the acceptability of validation characteristics in terms of linearity, correctness, and precision. Performing operations according to the methodology described ensures reliable and accurate analysis results.
- 28 November 2025
- Published by Academy of International Scientific Cooperation in "Medical & Pharmaceutical Journal "Pulse"
- Vol. 27 (12)
DEVELOPMENT AND VALIDATION METHOD FOR THE QUANTATIVE DETERMINATION OF CAFFEINE-SODIUM BENZOATE BY FOURIER TRANSFORM INFRARED SPECTROMETRY
Relevance. The article presents a method for the quantitative determination of caffeine-sodium benzoate by infrared Fourier transform spectrometry in the mode of disturbed total internal reflection. The research is aimed at developing an algorithm for the quantitative determination and validation of the method of caffeine-sodium benzoate in solid multicomponent mixtures by Fourier transform IR spectrometry. Aim. Development of an algorithm for the quantitative determination and validation of the method of caffeine-sodium benzoate in solid multicomponent mixtures by Fourier transform IR spectrometry. Materials and Methods. The study was conducted on a model mixture of tablet mass reproducing the composition of Citramon P 500 mg tablets (JSC Pharmstandard-Lexredstva). 30 calibration and 20 control samples were prepared by mixing the substance of caffeine-sodium benzoate with a mixture of auxiliary substances. IR spectra were recorded on a Cary 630 FTIR spectrometer (Agilent, USA) in the range of 4000-650 cm⁻1 (resolution 4 cm⁻1). The data was processed in KNIME 4.5.7 using the Python 3.9.10 package and the scikit-learn 1.3.0 library. Processing stages: normalization, separation of spectrometric data into training/test samples (in a 70:30 ratio according to the Kennard-Stone method), using the optimal configuration of automated preprocessing from a combination of 4 options, using a cascade of models consisting of 6 processing options with automated selection of the best combination of results, obtaining a mathematical (calibration) model, verification of the predictive ability of the model on a test sample, approbation of the model on control samples, validation of the analytical methodology. Results. The coefficient of determination r2 of the mathematical model when analyzing a test sample of spectrometric data was 0.99, which confirms its high predictive ability. When tested on control samples of a mixture similar to the composition of Citramon P tablets, the relative deviation of the calculated concentration from the actual concentration did not exceed ± 0.98%. Conclusions. An algorithm for the quantitative determination of caffeine-sodium benzoate in solid multicomponent mixtures by IR Fourier spectrometry in the mode of disturbed total internal reflection has been developed and tested. The value of the relative deviation ± 0.98% in a wide range of concentrations indicates the applicability of the algorithm. The validation procedure of the analytical methodology has shown that this methodology meets the criteria for the acceptability of validation characteristics in terms of linearity, correctness, and precision. Performing operations according to the methodology described ensures reliable and accurate analysis results.
- Open Access
- 24 June 2025
- Published by FSBEI of Higher Education SamSMU of Ministry of Health of the Russian Federation in Aspirantskiy Vestnik Povolzhiya
- Vol. 25 (2) , 75-82
Eutectic mixtures in the design of drugs
Drug development is a stage of modern drug design aimed at improving the biopharmaceutical characteristics of drugs, such as solubility, chemical stability, bioavailability, and pharmacological activity. The synthesis of solid dispersed systems of the eutectic type is one of the alternative options for the creation of new medicines based on known active pharmaceutical substances with improved and predictable properties. Eutectic mixtures consist of two or more components, and are characterized by certain compositions and a low melting point. The features of the microstructure of eutectic affect its physico-chemical properties, which determines the potential use of these systems in the pharmaceutical industry. The article provides an overview of scientific research aimed at studying eutectic compositions and analyzing their characteristics: solubility and dissolution rate, therapeutic efficacy and technological properties.
- 24 June 2025
- Published by FSBEI of Higher Education SamSMU of Ministry of Health of the Russian Federation in Aspirantskiy Vestnik Povolzhiya
- Vol. 25 (2) , 75-82
Open AccessEutectic mixtures in the design of drugs
Drug development is a stage of modern drug design aimed at improving the biopharmaceutical characteristics of drugs, such as solubility, chemical stability, bioavailability, and pharmacological activity. The synthesis of solid dispersed systems of the eutectic type is one of the alternative options for the creation of new medicines based on known active pharmaceutical substances with improved and predictable properties. Eutectic mixtures consist of two or more components, and are characterized by certain compositions and a low melting point. The features of the microstructure of eutectic affect its physico-chemical properties, which determines the potential use of these systems in the pharmaceutical industry. The article provides an overview of scientific research aimed at studying eutectic compositions and analyzing their characteristics: solubility and dissolution rate, therapeutic efficacy and technological properties.
- 18 May 2025
- Published by Russian Vrach, Publishing House Ltd. in Problems of Biological, Medical and Pharmaceutical Chemistry
- p. 30-36
QUANTITATIVE DETERMINATION ALGORITHM OF ACETYLSALICYLIC ACID BY FTIR SPECTROMETR
Introduction. The article presents an algorithm for the quantitative determination of acetylsalicylic acid by Fourier-transform infrared (FTIR) spectroscopy in the mode of disturbed total internal reflection on the example of the analysis of mixtures similar to the composition of tablet dosage form. The study aims to develop an algorithm and a mathematical model based on the partial least squares (PLS) method. The proposed algorithm allows to exclude the stage of dissolution of samples, reduce the analysis time and can be adapted for the quantitative determination of other organic substances in solid dosage forms. Objective. Development and approbation of an algorithm for the quantitative determination of acetylsalicylic acid in solid multicomponent mixtures using FTIR-spectrometry with a mathematical model based on the partial least squares method. Material and Methods. The study was carried out on a model mixture of tablet mass, similar of tablets “Acetylsalicylic acid” 500 mg (OJSC “Dalchimpharm”). 30 calibration and 15 control samples were prepared by mixing acetylsalicylic acid substance with a mixture of excipients. IR spectra were recorded on a Cary 630 FTIR spectrometer (Agilent, USA) in the range of 4000-650 cm-¹ (resolution: 4 cm-¹). Data were processed in KNIME 4.5.7 using the Python 3.9.10 package and the scikit-learn 1.3.0 library. Processing stages: normalization, multiplicative scattering correction, separation of spectrometric data into training/test sets (in the ratio 70:30 according to the Kennard-Stone method), obtaining a calibration (“mathematical”) model by the PLS method, testing the predictive ability of the model on the test set, and testing the model on control samples of acetylsalicylic acid. Results. The determination coefficient (r²) of the mathematical model when analyzing the test sample of spectrometric data was 0.97, which confirms its high predictive ability. When tested on control samples of acetylsalicylic acid, the relative deviation of the calculated concentration from the actual one did not exceed ±5%. Conclusions. An algorithm for the quantitative determination of acetylsalicylic acid by infrared spectrometry in the mode of disturbed total internal reflection based on the partial least squares method was developed and tested. The relative deviation of ±5% in a wide range of concentrations indicates the applicability of the algorithm for the development of a technique for the quantitative analysis of acetylsalicylic acid by FTIR-spectrometry. Further optimization of spectrometric data processing in order to increase the predictive ability of mathematical models will allow to implement the algorithm in quality control of tablet dosage forms.
- 18 May 2025
- Published by Russian Vrach, Publishing House Ltd. in Problems of Biological, Medical and Pharmaceutical Chemistry
- p. 30-36
QUANTITATIVE DETERMINATION ALGORITHM OF ACETYLSALICYLIC ACID BY FTIR SPECTROMETR
Introduction. The article presents an algorithm for the quantitative determination of acetylsalicylic acid by Fourier-transform infrared (FTIR) spectroscopy in the mode of disturbed total internal reflection on the example of the analysis of mixtures similar to the composition of tablet dosage form. The study aims to develop an algorithm and a mathematical model based on the partial least squares (PLS) method. The proposed algorithm allows to exclude the stage of dissolution of samples, reduce the analysis time and can be adapted for the quantitative determination of other organic substances in solid dosage forms. Objective. Development and approbation of an algorithm for the quantitative determination of acetylsalicylic acid in solid multicomponent mixtures using FTIR-spectrometry with a mathematical model based on the partial least squares method. Material and Methods. The study was carried out on a model mixture of tablet mass, similar of tablets “Acetylsalicylic acid” 500 mg (OJSC “Dalchimpharm”). 30 calibration and 15 control samples were prepared by mixing acetylsalicylic acid substance with a mixture of excipients. IR spectra were recorded on a Cary 630 FTIR spectrometer (Agilent, USA) in the range of 4000-650 cm-¹ (resolution: 4 cm-¹). Data were processed in KNIME 4.5.7 using the Python 3.9.10 package and the scikit-learn 1.3.0 library. Processing stages: normalization, multiplicative scattering correction, separation of spectrometric data into training/test sets (in the ratio 70:30 according to the Kennard-Stone method), obtaining a calibration (“mathematical”) model by the PLS method, testing the predictive ability of the model on the test set, and testing the model on control samples of acetylsalicylic acid. Results. The determination coefficient (r²) of the mathematical model when analyzing the test sample of spectrometric data was 0.97, which confirms its high predictive ability. When tested on control samples of acetylsalicylic acid, the relative deviation of the calculated concentration from the actual one did not exceed ±5%. Conclusions. An algorithm for the quantitative determination of acetylsalicylic acid by infrared spectrometry in the mode of disturbed total internal reflection based on the partial least squares method was developed and tested. The relative deviation of ±5% in a wide range of concentrations indicates the applicability of the algorithm for the development of a technique for the quantitative analysis of acetylsalicylic acid by FTIR-spectrometry. Further optimization of spectrometric data processing in order to increase the predictive ability of mathematical models will allow to implement the algorithm in quality control of tablet dosage forms.
- Open Access
- 26 August 2024
- Published by FSBEI of Higher Education SamSMU of Ministry of Health of the Russian Federation in Aspirantskiy Vestnik Povolzhiya
- Vol. 24 (1) , 79-83
The use of a hypromellose based sorbent for a solid-phase extraction in the quantitative determination of procaine in combination drugs
Aim – to assess the selectivity and metrological characteristics of the spectrophotometric method for procaine determination in combination drugs using a solid-phase extraction sorbent based on hypromellose. Material and methods. The solid-phase extraction sorbent was obtained with hypromellose and ethyl cyanoacrylate; the procaine hydrochloride and sodium hydroxide formed the active centers. The sorbent was prepared using a standard method. The sorption capacity of the obtained sorbent samples for procaine was 10.2 ± 1.0 µg/g. For the study, we selected the combination drugs containing procaine and its salts, such as "Menovazin", "Sulfocamphocaine", and "Otolorin". The eluate optical density was registered using a SF-56 spectrophotometer (OKB SPECTR LLC) at an analytical wavelength of 292 nm in a cuvette with an optical layer thickness of 1 cm. The reference solution was a 0.1 M hydrochloric acid solution. To calculate the procaine content in the eluates, a calibration graph (dependence of eluate optical density on procaine concentration) was plotted in the concentration range of 1–20 mcg/ml. To evaluate the selectivity (specificity) of sample preparation in chromatographic separation of the combination drugs, the absorption spectra were registered in the wavelength range of 200–400 nm for eluates obtained using purified water and a 0.1 M hydrochloric acid solution. The procaine and benzocaine were identified in the eluate by the presence of absorption maxima at wavelengths of 222 and 286 nm for benzocaine, and 228 and 292 nm for procaine. For statistical processing of the experimental results and determination of metrological characteristics of the analysis method, we followed the GPM.1.1.0013 "Statistical processing of results of physical, physicochemical, and chemical tests". Results. We have demonstrated the selectivity of the spectrophotometric determination of procaine in certain combination drugs using a solid-phase extraction sorbent based on hypromellose. The selective binding of the analyzed substance with active centers in the sorbent and stepwise elution with purified water and a 0.1 M hydrochloric acid solution during solid-phase extraction eliminated the interfering effect of drug components during the UV-spectrophotometry of procaine. The use of a hypromellose based sorbent improved the metrological characteristics and reduced the systematic error of the quantitative determination method by an average of 14.4%. The proposed methodological approach using a selective sorbent might be recommended as the quality control for combination drugs containing procaine and its salts.
- 26 August 2024
- Published by FSBEI of Higher Education SamSMU of Ministry of Health of the Russian Federation in Aspirantskiy Vestnik Povolzhiya
- Vol. 24 (1) , 79-83
Open AccessThe use of a hypromellose based sorbent for a solid-phase extraction in the quantitative determination of procaine in combination drugs
Aim – to assess the selectivity and metrological characteristics of the spectrophotometric method for procaine determination in combination drugs using a solid-phase extraction sorbent based on hypromellose. Material and methods. The solid-phase extraction sorbent was obtained with hypromellose and ethyl cyanoacrylate; the procaine hydrochloride and sodium hydroxide formed the active centers. The sorbent was prepared using a standard method. The sorption capacity of the obtained sorbent samples for procaine was 10.2 ± 1.0 µg/g. For the study, we selected the combination drugs containing procaine and its salts, such as "Menovazin", "Sulfocamphocaine", and "Otolorin". The eluate optical density was registered using a SF-56 spectrophotometer (OKB SPECTR LLC) at an analytical wavelength of 292 nm in a cuvette with an optical layer thickness of 1 cm. The reference solution was a 0.1 M hydrochloric acid solution. To calculate the procaine content in the eluates, a calibration graph (dependence of eluate optical density on procaine concentration) was plotted in the concentration range of 1–20 mcg/ml. To evaluate the selectivity (specificity) of sample preparation in chromatographic separation of the combination drugs, the absorption spectra were registered in the wavelength range of 200–400 nm for eluates obtained using purified water and a 0.1 M hydrochloric acid solution. The procaine and benzocaine were identified in the eluate by the presence of absorption maxima at wavelengths of 222 and 286 nm for benzocaine, and 228 and 292 nm for procaine. For statistical processing of the experimental results and determination of metrological characteristics of the analysis method, we followed the GPM.1.1.0013 "Statistical processing of results of physical, physicochemical, and chemical tests". Results. We have demonstrated the selectivity of the spectrophotometric determination of procaine in certain combination drugs using a solid-phase extraction sorbent based on hypromellose. The selective binding of the analyzed substance with active centers in the sorbent and stepwise elution with purified water and a 0.1 M hydrochloric acid solution during solid-phase extraction eliminated the interfering effect of drug components during the UV-spectrophotometry of procaine. The use of a hypromellose based sorbent improved the metrological characteristics and reduced the systematic error of the quantitative determination method by an average of 14.4%. The proposed methodological approach using a selective sorbent might be recommended as the quality control for combination drugs containing procaine and its salts.
- 10 June 2024
- Published by Folium Publishing Company in Химико-фармацевтический журнал
- Vol. 58 (5) , 54-58
Применение сорбента на основе этилцеллюлозы для пробоподготовки комбинированных лекарственных препаратов, содержащих кислоту салициловую
Показана селективность методики спектрофотометрического определения кислоты салициловой в некоторых комбинированных лекарственных препаратах с использованием для пробоподготовки сорбента для твердофазной экстракции (ТФЭ) на основе этилцеллюлозы. Селективное связывание анализируемого вещества с активными центрами в сорбенте и ступенчатое элюирование последовательно водой очищенной и раствором натрия гидроксида концентрации 0,1 моль/л в ходе ТФЭ устраняет мешающий эффект компонентов лекарственных препаратов при УФ-спектрофотометрии кислоты салициловой. Применение сорбента на основе этилцеллюлозы приводит к улучшению метрологических характеристик и снижению систематической погрешности методики количественного определения в среднем на 47 %.
- 10 June 2024
- Published by Folium Publishing Company in Химико-фармацевтический журнал
- Vol. 58 (5) , 54-58
Применение сорбента на основе этилцеллюлозы для пробоподготовки комбинированных лекарственных препаратов, содержащих кислоту салициловую
Показана селективность методики спектрофотометрического определения кислоты салициловой в некоторых комбинированных лекарственных препаратах с использованием для пробоподготовки сорбента для твердофазной экстракции (ТФЭ) на основе этилцеллюлозы. Селективное связывание анализируемого вещества с активными центрами в сорбенте и ступенчатое элюирование последовательно водой очищенной и раствором натрия гидроксида концентрации 0,1 моль/л в ходе ТФЭ устраняет мешающий эффект компонентов лекарственных препаратов при УФ-спектрофотометрии кислоты салициловой. Применение сорбента на основе этилцеллюлозы приводит к улучшению метрологических характеристик и снижению систематической погрешности методики количественного определения в среднем на 47 %.
- Open Access
- 21 March 2023
- Published by FSBEI of Higher Education SamSMU of Ministry of Health of the Russian Federation in Aspirantskiy Vestnik Povolzhiya
- Vol. 23 (1) , 36-40
Preparation of sorbents for solid-phase extraction of benzoic acid from aqueous solutions
Aim to obtain sorbents based on ethylcellulose for solid-phase extraction of benzoic acid from aqueous solutions. Material and methods. To create the sorbents for solid-phase extraction, we used the following reagents: ethyl cellulose, copper sulfate pentahydrate, sodium hydroxide, benzoic acid, purified water, ethyl alcohol 95%. The samples of ethyl cellulose-based sorbents were studied by Fourier transform IR spectrometry on an Agilent Cary 630 FTIR spectrometer. The Agilent Microlab PC Expert software was used for registration and primary processing of IR spectra, and for statistical analysis. The capacity of sorbents for solid-phase extraction was evaluated in a dynamic mode. The microstructure of the samples was studied by field emission scanning electron microscopy (FE-SEM) on a Hitachi SU8000 electron microscope. The specific surface area of the synthesized sorbents was measured by low-temperature nitrogen porometry using the Brunauer Emmett Teller approximation, on the Autosorb 1 device, using the Quantachrome AS1Win software, according to a well-known technique. Results. А method was proposed for obtaining a sorbent for solid-phase extraction of benzoic acid from aqueous solutions. The IR-spectrometry did not reveal significant differences between ethylcellulose samples and the obtained sorbent samples. The optimal concentrations of ethylcellulose and benzoic acid in the reaction mixture were determined to create a sorbent with a maximum capacity of 19.2 g/g. The differences in the morphological structure of the surface of ethylcellulose matrix and obtained sorbents were described. The specific surface area of ethylcellulose sorbent with a maximum capacity for benzoic acid was 14.10 cm2/g.
- 21 March 2023
- Published by FSBEI of Higher Education SamSMU of Ministry of Health of the Russian Federation in Aspirantskiy Vestnik Povolzhiya
- Vol. 23 (1) , 36-40
Open AccessPreparation of sorbents for solid-phase extraction of benzoic acid from aqueous solutions
Aim to obtain sorbents based on ethylcellulose for solid-phase extraction of benzoic acid from aqueous solutions. Material and methods. To create the sorbents for solid-phase extraction, we used the following reagents: ethyl cellulose, copper sulfate pentahydrate, sodium hydroxide, benzoic acid, purified water, ethyl alcohol 95%. The samples of ethyl cellulose-based sorbents were studied by Fourier transform IR spectrometry on an Agilent Cary 630 FTIR spectrometer. The Agilent Microlab PC Expert software was used for registration and primary processing of IR spectra, and for statistical analysis. The capacity of sorbents for solid-phase extraction was evaluated in a dynamic mode. The microstructure of the samples was studied by field emission scanning electron microscopy (FE-SEM) on a Hitachi SU8000 electron microscope. The specific surface area of the synthesized sorbents was measured by low-temperature nitrogen porometry using the Brunauer Emmett Teller approximation, on the Autosorb 1 device, using the Quantachrome AS1Win software, according to a well-known technique. Results. А method was proposed for obtaining a sorbent for solid-phase extraction of benzoic acid from aqueous solutions. The IR-spectrometry did not reveal significant differences between ethylcellulose samples and the obtained sorbent samples. The optimal concentrations of ethylcellulose and benzoic acid in the reaction mixture were determined to create a sorbent with a maximum capacity of 19.2 g/g. The differences in the morphological structure of the surface of ethylcellulose matrix and obtained sorbents were described. The specific surface area of ethylcellulose sorbent with a maximum capacity for benzoic acid was 14.10 cm2/g.
- 27 February 2023
- Published by European Scientific Society in Archiv Euromedica
- Vol. 13 (1)
PREMATURE VENTRICULAR CONTRACTIONS AS AN ADDITIONAL RISK FACTOR FOR THE ARTERIAL THROMBOEMBOLISM
PREMATURE VENTRICULAR CONTRACTIONS AS AN ADDITIONAL RISK FACTOR FOR THE ARTERIAL THROMBOEMBOLISM - Archiv-EuroMedica
- 27 February 2023
- Published by European Scientific Society in Archiv Euromedica
- Vol. 13 (1)
PREMATURE VENTRICULAR CONTRACTIONS AS AN ADDITIONAL RISK FACTOR FOR THE ARTERIAL THROMBOEMBOLISM
PREMATURE VENTRICULAR CONTRACTIONS AS AN ADDITIONAL RISK FACTOR FOR THE ARTERIAL THROMBOEMBOLISM - Archiv-EuroMedica
- 7 July 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 160-163
Prediction of COX-2 inhibitory activity using LSTM-network
Generative recurrent networks are widely used for de novo drug discovery. We used long-short term memory (LSTM) architecture to obtain a model for predicting the quantitative characteristics of COX-2 inhibitory activity for small molecules. The best accuracy was achieved at epochs 32 and 34 for the training and test data sets (82 and 79%, respectively). To search for new potential candidates from the general data set, the top 10 substances with the lowest IC 50 values were selected. The value of IC50 is in the range from 0.006 - 0.25 nM. It is noted that the best value of IC50 in indole derivatives. The obtained data were generalized and template structures were built to generate 1000 substances using the RD-kit. Using the developed model, IC50 was calculated for each of them and the best candidates were determined. As a result, 9 compounds were revealed, in which the values were less than 0.2 nM.
- 7 July 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 160-163
Prediction of COX-2 inhibitory activity using LSTM-network
Generative recurrent networks are widely used for de novo drug discovery. We used long-short term memory (LSTM) architecture to obtain a model for predicting the quantitative characteristics of COX-2 inhibitory activity for small molecules. The best accuracy was achieved at epochs 32 and 34 for the training and test data sets (82 and 79%, respectively). To search for new potential candidates from the general data set, the top 10 substances with the lowest IC 50 values were selected. The value of IC50 is in the range from 0.006 - 0.25 nM. It is noted that the best value of IC50 in indole derivatives. The obtained data were generalized and template structures were built to generate 1000 substances using the RD-kit. Using the developed model, IC50 was calculated for each of them and the best candidates were determined. As a result, 9 compounds were revealed, in which the values were less than 0.2 nM.
- 1 January 2022
- Published by Media Sphere Publishing Group in Forensic Medical Expertise
- Vol. 65 (4) , 41-45
Mathematical planning of the liquid-liquid extraction procedure: a forensic chemical study of verapamil in blood
The objective of the study is to determine the optimal conditions for blood sample preparation by liquid-liquid extraction using mathematical planning of the experiment by the example of forensic chemical study of verapamil. Evaluation of verapamil recovery from blood samples was performed according to the scheme of multivariate three-level experimental planning using the Box-Behnken design. The effect of aqueous phase pH, the ratio of chloroform to n-butanol in the extraction agent, extraction and centrifugation time, addition of sodium chloride, and the ratio of sample and extraction agent volumes on the recovery was studied. The algorithm using mathematical planning and development of liquid-liquid extraction model of target analyte can be recommended for analysis procedure optimization in forensic chemistry.
- 1 January 2022
- Published by Media Sphere Publishing Group in Forensic Medical Expertise
- Vol. 65 (4) , 41-45
Mathematical planning of the liquid-liquid extraction procedure: a forensic chemical study of verapamil in blood
The objective of the study is to determine the optimal conditions for blood sample preparation by liquid-liquid extraction using mathematical planning of the experiment by the example of forensic chemical study of verapamil. Evaluation of verapamil recovery from blood samples was performed according to the scheme of multivariate three-level experimental planning using the Box-Behnken design. The effect of aqueous phase pH, the ratio of chloroform to n-butanol in the extraction agent, extraction and centrifugation time, addition of sodium chloride, and the ratio of sample and extraction agent volumes on the recovery was studied. The algorithm using mathematical planning and development of liquid-liquid extraction model of target analyte can be recommended for analysis procedure optimization in forensic chemistry.
- Open Access
- 15 May 2021
- Published by FSBEI of Higher Education SamSMU of Ministry of Health of the Russian Federation in Aspirantskiy Vestnik Povolzhiya
- Vol. 21 (5-6) , 16-22
Preparation of sorbents for solid-phase extraction of salicylic acid from aqueous solutions
Salicylic acid and its derivatives are widely used in medicine and pharmacy as antipyretic, antirheumatic, anti-inflammatory and analgesic drugs for external and internal use. The development of methods for the quantitation of salicylic acid in multicomponent samples using selective methods of sample preparation is an important problem in quality drug control. The aim of the study was to obtain sorbents based on ethyl cellulose for solid-phase extraction of salicylic acid from aqueous solutions. As a result of the study, a method for obtaining a sorbent for solid-phase salicylic acid from aqueous solutions was proposed. The IR spectroscopy of the obtained sorbent samples did not establish significant structural differences between ethylcellulose and the obtained sorbents. Optimal concentrations of ethylcellulose and salicylic acid solutions in the reaction mixture for obtaining the sorbent with a maximum value of sorption capacity of 93.5 µg/g of sorbent were revealed. The method for the quantitation of salicylic acid from aqueous solutions with the use of the obtained sorbent was proposed. Metrological estimation of salicylic acid quantitation with the help of the obtained sorbent for solid-phase extraction was carried out.
- 15 May 2021
- Published by FSBEI of Higher Education SamSMU of Ministry of Health of the Russian Federation in Aspirantskiy Vestnik Povolzhiya
- Vol. 21 (5-6) , 16-22
Open AccessPreparation of sorbents for solid-phase extraction of salicylic acid from aqueous solutions
Salicylic acid and its derivatives are widely used in medicine and pharmacy as antipyretic, antirheumatic, anti-inflammatory and analgesic drugs for external and internal use. The development of methods for the quantitation of salicylic acid in multicomponent samples using selective methods of sample preparation is an important problem in quality drug control. The aim of the study was to obtain sorbents based on ethyl cellulose for solid-phase extraction of salicylic acid from aqueous solutions. As a result of the study, a method for obtaining a sorbent for solid-phase salicylic acid from aqueous solutions was proposed. The IR spectroscopy of the obtained sorbent samples did not establish significant structural differences between ethylcellulose and the obtained sorbents. Optimal concentrations of ethylcellulose and salicylic acid solutions in the reaction mixture for obtaining the sorbent with a maximum value of sorption capacity of 93.5 µg/g of sorbent were revealed. The method for the quantitation of salicylic acid from aqueous solutions with the use of the obtained sorbent was proposed. Metrological estimation of salicylic acid quantitation with the help of the obtained sorbent for solid-phase extraction was carried out.