FGFnu Gorky

Fnu Gorky

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article

Previous Organizations / Institutes

The organizations / institutes from the scholar's other articles in the past ten years


Fnu Gorky has a total of 26 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Plasma-Enhanced Graphene Coatings on Ti-6Al-4V: Insights from Non-Destructive Characterization

    by Victor J. Sagrero, Fnu Gorky, Vashanti Storr, Fernando M. de Oliveira, Héctor G. Carreón, María L. Carreón

    In this work, the deposition of graphene coatings on substrates of an ELI grade Ti-6Al-4V alloy was carried out using the Plasma Enhanced Chemical Vapor Deposition (PECVD) technique. The purpose of this study was to improve the surface properties of the material. The characterization of the material was carried out by non-destructive techniques, such as Raman Spectroscopy and Thermoelectric Potential. A preliminary characterization of Ti substrates was carried out by Raman spectroscopy. Conversely, thermoelectric potential tests were conducted using three distinct tip systems and four different temperature gradients. Lastly, some surface roughness measurements were conducted on all samples, both coated and uncoated. Graphene micro-structured coatings were obtained using a plasma-activated mixture of hydrogen and methane gases with an equimolar feed ratio (1:1 H2:CH4) at a temperature of 850 °C and a plasma exposure of 150 Watts and duration of 15 min. Raman spectra verified the presence of uniform micrometric graphene on the surface of Ti substrates. Graphene-coated Ti-6Al-4V ELI substrates exhibited Seebeck coefficient values indicating metallic-like behavior and suitability for thermoelectric sensing. In the eddy current analyses, it was found that low frequencies provided the highest sensitivity for differentiating between samples. An inverse relationship was identified between substrate thickness and phase angle, and a direct relationship with calculated electrical conductivity was also identified. This direct relation is attributed to penetration depth and interactions due to the chemical nature of the substrate and coating. Despite a slight increase in surface roughness after graphene deposition, values remained comparable to the base alloy, preserving compatibility for biomedical integration. Thermoelectric potential measurements revealed enhanced sensitivity to surface morphology and interfacial effects when high-sensitivity probe configurations were employed. These results support potential applications in implantable or wearable temperature sensors, energy harvesting devices, and smart biomedical interfaces. The thickness of the graphene coating was also characterized by SEM, which showed that the films deposited by PECVD are about 1 micron thick.


  • Open Access

    Plasma-Enhanced Graphene Coatings on Ti-6Al-4V: Insights from Non-Destructive Characterization

    by Victor J. Sagrero, Fnu Gorky, Vashanti Storr, Fernando Maia de Oliveira, Héctor G. Carreón, María L. Carreón

    In this work the deposition of graphene coatings on substrates of an ELI grade Ti-6Al-4V alloy was carried out using the Plasma Enhanced Chemical Vapor Deposition (PECVD) technique. The purpose of this study was to improve the surface properties of the material. The characterization of the material was carried out by non-destructive techniques, such as Raman Spectroscopy and Thermoelectric Potential. A preliminary characterization of Ti substrates was carried out by Raman spectroscopy. Conversely, thermoelectric potential tests were conducted using three distinct tip systems and four different temperature gradients. Lastly, some surface roughness measurements were conducted on all samples, both coated and uncoated. Graphene micro-structured coatings were obtained using a plasma activated mixture of hydrogen and methane gases with equimolar feed ratio (1:1 H₂:CH₄) at a temperature of 850°C and a plasma exposure of 150 Watts and duration of 15 minutes. Raman spectra verified the presence of uniform micrometric graphene on the surface of Ti substrates. Graphene-coated Ti-6Al-4V ELI substrates exhibited absolute thermoelectric potentials between 1.9 and 3.4 μV/K, indicating metallic-like behavior and suitability for thermoelectric sensing. In the eddy current analyses, it was found that the 50 kHz frequency provided the highest sensitivity for differentiating between samples. An inverse relationship was identified between substrate thickness and phase angle, and a direct relationship with calculated electrical conductivity. This direct relation is attributed to penetration depth and interactions due to the chemical nature of the substrate and coating. Despite a slight increase in surface roughness after graphene deposition, values remained comparable to the base alloy, preserving compatibility for biomedical integration. The Au-Cu testing system demonstrated enhanced sensitivity to Seebeck coefficient variations, suggesting its promise for high-resolution thermal sensing. These results support potential applications in implantable or wearable temperature sensors, energy harvesting devices, and smart biomedical interfaces. The thickness of the graphene coating was also characterized by SEM, which showed that the films deposited by PECVD are about 1 micron thick.

  • Open Access

    Cold-Plasma-Driven Ammonia Synthesis over Porous Silica: The Role of the Morphology

    by Fnu Gorky, Vashanti Storr, Jacek B. Jasinski, Maria L. Carreon

    Nonthermal plasma (NTP) has opened unexplored routes for small-scale, decentralized ammonia production. However, understanding the ammonia formation pathways when employing NTP-driven processes is challenging due to the complex nature of the process. In this work, we report the effects of the morphology and textural properties on ammonia production. Herein, we explore mesoporous and macroporous regimes in silica. Performance of mesoporous silica with a gyroid morphology displays the highest ammonia production rate of 160.7 μmol/min·g-cat at a plasma power of 15 W. The findings from this work provide insights into tailoring porous structures and morphology for ammonia production powered by NTP. This work presents significant progress in the development of earth-abundant materials, achieved by tailoring their morphology and porous structure to improve their efficiency in plasma ammonia production.


  • Open Access

    Performance and Enhanced Efficiency Induced by Cold Plasma on SAPO-34 Membranes for CO2 and CH4 Mixtures

    by Fnu Gorky, Vashanti Storr, Grace Jones, Apolo Nambo, Jacek B. Jasinski, Maria L. Carreon

    In this study, we investigate the influence of cold-plasma-induced enhanced performance and efficiency of SAPO-34 membranes in the separation of CO2 and CH4 mixtures. Placing the herein presented research in a broader context, we aim to address the question of whether cold plasma can significantly impact the membrane performance. We subjected SAPO-34 membranes to plasma mild disturbances and analyzed their performance in separating CO2 and CH4. Our findings reveal a notable enhancement in membrane efficiency and sustained performance when exposed to cold plasma. The pulsed plasma separation displayed improved structural integrity, and the experimental results indicated that the linear structure of CO₂ facilitates the distortion of electron clouds in response to the electric field, a property known as polarizability, which aids in effective separation. Plausible mechanistic insight indicated that the intermolecular forces facilitated an integral role in SAPO-34 membranes exhibiting strong electrostatic interactions. In conclusion, our research highlights the potential of cold plasma as a promising technique for improving the performance of SAPO-34 membranes in gas mixtures at atmospheric pressures, providing valuable insights for optimizing membrane technology in carbon capture and gas separation applications.


  • Open Access

    Sustainable ammonia synthesis from nitrogen wet with sea water vapor by single-step plasma catalysis

    by Hoang M. Nguyen, Fnu Gorky, Shelby R. Guthrie, Maria L. Carreon

    Ammonia synthesis at ambient conditions employing intermittent distributed green sources of energy and feedstocks is globally sought to replace the centralized Haber-Bosch (H-B) process operating at high temperature and pressure. We report herein for the first time an effective and sustainable ammonia synthesis pathway from N2 wet with seawater vapor over spherical SiO2 and M/SiO2 (M: Ag, Cu, and Co) catalysts driven by non-thermal plasma (NTP). Experimental results indicate that the presence of a catalyst is required for ammonia production from seawater vapor and N2. The Co/SiO2 catalyst delivered the highest ammonia synthesis rate rNH3 of 3.7 mmol.gcat-1.h-1 and energy yield of 3.2 g-NH3.kW-1.h-1 at a relatively low input power of 2 W. The extraction of H atoms from H2O molecules plays an important role in the ammonia synthesis from seawater vapor. This work unfolds a novel platform for the subsequent optimization of sustainable ammonia production from endless resources such as seawater and N2 through catalytic non-thermal plasma potentially powered by renewable sources.

  • Open Access

    CC3 porous organic cage crystals and membranes for the non-thermal plasma catalytic ammonia synthesis

    by Fnu Gorky, Hoang M. Nguyen, Jolie M. Lucero, Shelby Guthrie, James M. Crawford, Moises A. Carreon, Maria L. Carreon


  • Insights on cold plasma ammonia synthesis and decomposition using alkaline earth metal-based perovskites

    by Fnu Gorky, Jolie M. Lucero, James M. Crawford, Beth A. Blake, Shelby R. Guthrie, Moises A. Carreon, Maria L. Carreon

    The synergistic combination of solid catalysts and plasma for the synthesis of ammonia has recently attracted considerable scientific interest. Herein, we explore MgTiO3, CaTiO3, SrTiO3, and BaTiO3 perovskites as effective catalysts for the synthesis and decomposition of ammonia via cold plasma. MgTiO3 perovskite, which contains the most electronegative alkaline metal of all the studied perovskites, resulted in the highest ammonia synthesis rate with a value of 12.16 μmol min−1 m−2, which is around 50 times the value of only plasma, 0.24 μmol min−1. The high electronegativity of Mg can be assisting the dissociation of the triple nitrogen covalent bond. This intrinsic property of Mg perovskite added to the homogeneity of the plasma arising from the dielectric constant value of this perovskite might be synergistically responsible for the high ammonia synthesis rate observed. Interestingly, ammonia production over MgTiO3 perovskite is almost double the performance of traditional oxides and some microporous crystals. We also explored the ammonia decomposition reaction due to the possibility of the importance of the reversible reaction owing to the electron collision with the ammonia molecules formed. Ammonia decomposition increased as plasma power increased. This points out the benefit of running at low plasma power and the need to design plasma reactors where the newly formed ammonia molecules can be removed from the reaction system to avoid further electron collision. The highest ammonia decomposition yield was 44.37% at 20 W corresponding to an energy yield of 5.06 g-NH3 kW h−1.


  • Plasma catalytic ammonia synthesis on Ni nanoparticles: The size effect

    by Fnu Gorky, Anthony Best, Jacek Jasinski, Bryan J. Allen, Ana C. Alba-Rubio, Maria L. Carreon