Inna Ermilova
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Inna Ermilova has a total of 28 co-authors. Here are the top co-authors by number of shared publications:
- Jan Swenson
Chalmers University of Technology
11 shared publications - Alexander P. Lyubartsev
Stockholm University
6 shared publications - Jennifer Gilbert
Division of Physical Chemistry, Department of Chemistry, Naturvetarvägen 14, Lund University, 22362 Lund, Sweden
3 shared publications - Tommy Nylander
Physical Chemistry, Lund University, Lund, Sweden
3 shared publications Alexander Rodin
Department of Physics, Chalmers University of Technology, Fysikgränd 4, Göteborg 41258, Sweden
2 shared publicationsDawid Wojciech Pacut
Department of Physics, Chalmers University of Technology, Fysikgränd 4, Göteborg 41258, Sweden
2 shared publications
Latest Publications
- Open Access
- 25 April 2025
- Published by American Chemical Society (ACS) in Molecular Pharmaceutics
- Vol. 22 (6) , 2997-3009
Interactions of Sucrose and Trehalose with Lysozyme in Different Media: A Perspective from Atomistic Molecular Dynamics Simulations
Disaccharides are promising additives for stabilizing proteins in, e.g., pharmaceuticals and cryopreserved biomaterials. However, although many studies have shown that disaccharides exhibit such bioprotective and stabilizing properties, the underlying molecular mechanism is still elusive. In this study, we have tried to reach such an understanding by studying lysozyme in aqueous solutions of sucrose or trehalose and various ions (0.1 M Cl-, NaCl, and ZnCl2) by classical atomistic molecular dynamics (MD). The most important finding for understanding the mechanism of protein stabilization is that the disaccharides, in general, and trehalose, in particular, slow down the protein dynamics by reducing the number of internal hydrogen bonds (both with and without bridging water molecules) in the protein molecules. This reduction of internal protein interactions is caused by disaccharides binding to the protein hydration water, and trehalose forms more hydrogen bonds to water than sucrose. Although it is far from obvious that such a reduction of internal hydrogen bonding in the protein should lead to slower protein dynamics and thereby also a stabilization of the protein, the results show that this is clearly the case. The presence of ions also has some effect on the protein dynamics and stability. Particularly, it is discovered that the ability of sucrose to prevent protein aggregation increases substantially if ZnCl2 is added to the solution. The disaccharide and the salt seem to exhibit a synergistic effect in this case. To summarize, we have obtained a molecular understanding of protein stabilization by disaccharides, and why trehalose is more effective than sucrose for this particular system, and the finding is important for understanding how the protein stability in, e.g., pharmaceuticals should be optimized.
- 25 April 2025
- Published by American Chemical Society (ACS) in Molecular Pharmaceutics
- Vol. 22 (6) , 2997-3009
Open AccessInteractions of Sucrose and Trehalose with Lysozyme in Different Media: A Perspective from Atomistic Molecular Dynamics Simulations
Disaccharides are promising additives for stabilizing proteins in, e.g., pharmaceuticals and cryopreserved biomaterials. However, although many studies have shown that disaccharides exhibit such bioprotective and stabilizing properties, the underlying molecular mechanism is still elusive. In this study, we have tried to reach such an understanding by studying lysozyme in aqueous solutions of sucrose or trehalose and various ions (0.1 M Cl-, NaCl, and ZnCl2) by classical atomistic molecular dynamics (MD). The most important finding for understanding the mechanism of protein stabilization is that the disaccharides, in general, and trehalose, in particular, slow down the protein dynamics by reducing the number of internal hydrogen bonds (both with and without bridging water molecules) in the protein molecules. This reduction of internal protein interactions is caused by disaccharides binding to the protein hydration water, and trehalose forms more hydrogen bonds to water than sucrose. Although it is far from obvious that such a reduction of internal hydrogen bonding in the protein should lead to slower protein dynamics and thereby also a stabilization of the protein, the results show that this is clearly the case. The presence of ions also has some effect on the protein dynamics and stability. Particularly, it is discovered that the ability of sucrose to prevent protein aggregation increases substantially if ZnCl2 is added to the solution. The disaccharide and the salt seem to exhibit a synergistic effect in this case. To summarize, we have obtained a molecular understanding of protein stabilization by disaccharides, and why trehalose is more effective than sucrose for this particular system, and the finding is important for understanding how the protein stability in, e.g., pharmaceuticals should be optimized.
- Open Access
- 18 November 2024
- Published by American Chemical Society (ACS) in ChemRxiv
Interactions of sucrose and trehalose with lysozyme in different media: a perspective from atomistic and coarse-grained molecular dynamics simulations
Disaccharides are promising additives for stabilizing proteins in, for example, pharmaceuticals and cryopreserved biomaterials. However, although many studies have shown that disaccharides exhibit such bioprotective and stabilizing properties, the underlying molecular mechanism is still elusive. In this study we have tried to reach such understanding by studying lysozyme in aqueous solutions of sucrose or trehalose and various ions (0.1 M of Cl− , NaCl, ZnCl2 and CaCl2 ) by classical atomistic molecular dynamics (MD) and coarse-grained simulations. The latter simulations were performed for more diluted systems for elucidating larger structures of protein and disaccharide molecules, and possible aggregations. The most important finding for understanding the mechanism of protein stabilization is that the disaccharides in general, and trehalose in particular, slow down the protein dynamics by reducing the number of internal hydrogen bonds (both with and without bridging water molecules) in the protein molecules. This reduction of internal protein interactions is caused by disaccharides binding to the protein hydration water, and trehalose forms more hydrogen bonds to water than sucrose. Although it is far from obvious that such a reduction of internal hydrogen bonding in the protein should lead to slower protein dynamics, and thereby also a stabilization of the protein, the results show that this is clearly the case. The presence of ions has also some effect on the protein dynamics and stability. Particularly, it is discovered that sucrose ability to prevent protein aggregation increases substantially if ZnCl2 is added to the solution. The disaccharide and the salt seem to exhibit a synergistic effect in this case. To summarize, we have obtained molecular understanding for protein stabilization by disaccharides, and why trehalose is more effective than sucrose for this particular system, and the finding is important for understanding how the protein stability in e.g. pharmaceuticals should be optimized.
- 18 November 2024
- Published by American Chemical Society (ACS) in ChemRxiv
Open AccessInteractions of sucrose and trehalose with lysozyme in different media: a perspective from atomistic and coarse-grained molecular dynamics simulations
Disaccharides are promising additives for stabilizing proteins in, for example, pharmaceuticals and cryopreserved biomaterials. However, although many studies have shown that disaccharides exhibit such bioprotective and stabilizing properties, the underlying molecular mechanism is still elusive. In this study we have tried to reach such understanding by studying lysozyme in aqueous solutions of sucrose or trehalose and various ions (0.1 M of Cl− , NaCl, ZnCl2 and CaCl2 ) by classical atomistic molecular dynamics (MD) and coarse-grained simulations. The latter simulations were performed for more diluted systems for elucidating larger structures of protein and disaccharide molecules, and possible aggregations. The most important finding for understanding the mechanism of protein stabilization is that the disaccharides in general, and trehalose in particular, slow down the protein dynamics by reducing the number of internal hydrogen bonds (both with and without bridging water molecules) in the protein molecules. This reduction of internal protein interactions is caused by disaccharides binding to the protein hydration water, and trehalose forms more hydrogen bonds to water than sucrose. Although it is far from obvious that such a reduction of internal hydrogen bonding in the protein should lead to slower protein dynamics, and thereby also a stabilization of the protein, the results show that this is clearly the case. The presence of ions has also some effect on the protein dynamics and stability. Particularly, it is discovered that sucrose ability to prevent protein aggregation increases substantially if ZnCl2 is added to the solution. The disaccharide and the salt seem to exhibit a synergistic effect in this case. To summarize, we have obtained molecular understanding for protein stabilization by disaccharides, and why trehalose is more effective than sucrose for this particular system, and the finding is important for understanding how the protein stability in e.g. pharmaceuticals should be optimized.
- Open Access
- 4 November 2024
- Published by American Chemical Society (ACS) in ACS Omega
- Vol. 9 (46) , 46323-46338
Sucrose versus Trehalose: Observations from Comparative Study Using Molecular Dynamics Simulations
Binary mixtures of sucrose and trehalose in water were investigated using classical molecular dynamics (MD) simulations and free energy calculations. By classical MD simulations, the behavior of sugars was studied across the entire range of concentrations, from 0 to 100 wt % of water. Sugar-sugar and sugar-water affinities in diluted systems were in focus when using umbrella sampling and well-tempered metadynamics calculations. Moreover, in classical MD simulations, two approaches for system equilibration were applied: in the first, mixtures were preheated (using simulated annealing) before simulations under desired conditions, while in the second, no preliminary heating was used. It was discovered that sucrose has a stronger tendency to aggregate than trehalose, while the latter forms more hydrogen bonds with water. Below the concentration of 10 wt % of water, the number of hydrogen bonds between sugars is higher than the number of hydrogen bonds between sugars and water. The free energy calculations and hydrogen bonding analysis reveal certain dissimilarities in the hydration of oxygen-containing molecular groups. While there are noticeable differences in the hydration of various hydroxyl groups in sucrose and trehalose, all hydroxyl groups are clearly more hydrated than the ether oxygens in both sugars. Three factors contribute to the lower hydration of ether oxygens: they do not donate hydrogen bonds, they are slightly less polar than the oxygen atoms in hydroxyl groups, and they are less accessible to the solvent. Moreover, hydroxyl groups play the main role in binding water, and the geometry of trehalose is energetically preferable compared to the geometry of sucrose. Effects of preheating were demonstrated at water concentrations below 70 wt %, with more significant differences between mixtures observed at water concentrations below 40 wt %. Disaccharides bind stronger to each other and weaker with water molecules in preheated systems than in mixtures that were not preheated. The hydroxyl groups of sucrose and trehalose in preheated mixtures rotate slower than in systems that did not undergo thermal treatment. Therefore, while preheating is not necessary for liquid solutions, it is vital for the equilibration of samples in their amorphous solid state. In the experimental community, these findings are relevant for decision-making when choosing one of the disaccharides as a preservative.
- 4 November 2024
- Published by American Chemical Society (ACS) in ACS Omega
- Vol. 9 (46) , 46323-46338
Open AccessSucrose versus Trehalose: Observations from Comparative Study Using Molecular Dynamics Simulations
Binary mixtures of sucrose and trehalose in water were investigated using classical molecular dynamics (MD) simulations and free energy calculations. By classical MD simulations, the behavior of sugars was studied across the entire range of concentrations, from 0 to 100 wt % of water. Sugar-sugar and sugar-water affinities in diluted systems were in focus when using umbrella sampling and well-tempered metadynamics calculations. Moreover, in classical MD simulations, two approaches for system equilibration were applied: in the first, mixtures were preheated (using simulated annealing) before simulations under desired conditions, while in the second, no preliminary heating was used. It was discovered that sucrose has a stronger tendency to aggregate than trehalose, while the latter forms more hydrogen bonds with water. Below the concentration of 10 wt % of water, the number of hydrogen bonds between sugars is higher than the number of hydrogen bonds between sugars and water. The free energy calculations and hydrogen bonding analysis reveal certain dissimilarities in the hydration of oxygen-containing molecular groups. While there are noticeable differences in the hydration of various hydroxyl groups in sucrose and trehalose, all hydroxyl groups are clearly more hydrated than the ether oxygens in both sugars. Three factors contribute to the lower hydration of ether oxygens: they do not donate hydrogen bonds, they are slightly less polar than the oxygen atoms in hydroxyl groups, and they are less accessible to the solvent. Moreover, hydroxyl groups play the main role in binding water, and the geometry of trehalose is energetically preferable compared to the geometry of sucrose. Effects of preheating were demonstrated at water concentrations below 70 wt %, with more significant differences between mixtures observed at water concentrations below 40 wt %. Disaccharides bind stronger to each other and weaker with water molecules in preheated systems than in mixtures that were not preheated. The hydroxyl groups of sucrose and trehalose in preheated mixtures rotate slower than in systems that did not undergo thermal treatment. Therefore, while preheating is not necessary for liquid solutions, it is vital for the equilibration of samples in their amorphous solid state. In the experimental community, these findings are relevant for decision-making when choosing one of the disaccharides as a preservative.
- Open Access
- 17 September 2024
- Published by American Chemical Society (ACS) in ChemRxiv
Effect of minor differences in sequences of huntingtin peptides on their interactions with sucrose and trehalose: in silico investigation
In this work the behavior of two Huntingtin (Htt) peptides in mixtures with water and either sucrose or trehalose were investigated by classical molecular dynamics (MD) simulations. Structures of those peptides are listed in the Protein Databank as 2LD2 (Biophys. J., 2013, 105, 699-710) and 6N8C (Proc. Natl. Acad. Sci., 2019, 116, 9, 3562-3571). The principal difference between those peptides is in their C- and N-terminals. Since Huntington’s disease is related to the aggregation of proteins containing consecutive polyglutamine in their amino acid chains, the aim was to investigate if smaller amounts of disaccharides could reduce aggregation of two peptides from the Htt protein. Computational results revealed that both sugars alter the secondary structures of peptides and decrease the total number of contacts (the sum of hydrophobic contacts and hydrogen bonds) between these biomolecules. However, regarding only the number of hydrogen bonds, the disaccharides reduced this value for peptide-peptide interactions for 6N8C, while for 2LD2 sucrose and trehalose instead promoted an increase of this number. Such a difference in behaviors of peptides could be related to dissimilarities in their sequences, pointing out the importance to consider amino-acid residues in C- and N-terminal when developing drugs. Furthermore, both disaccharides demonstrated abilities to slow down the dynamics of simulated mixtures, which was concluded from rotational correlation and self-intermediate scattering functions. Amino-acid residues MET(1), GLU(5), LYS(6), LYS(9), GLU(12), LYS(15), PHE(17) and GLN(18) are identified as the main candidate amino acids involved in interpeptide binding and binding to disaccharides, where the glutamic acid residues (GLU(5) and GLU(12)) had the highest number of hydrogen bonds with sucrose and trehalose.
- 17 September 2024
- Published by American Chemical Society (ACS) in ChemRxiv
Open AccessEffect of minor differences in sequences of huntingtin peptides on their interactions with sucrose and trehalose: in silico investigation
In this work the behavior of two Huntingtin (Htt) peptides in mixtures with water and either sucrose or trehalose were investigated by classical molecular dynamics (MD) simulations. Structures of those peptides are listed in the Protein Databank as 2LD2 (Biophys. J., 2013, 105, 699-710) and 6N8C (Proc. Natl. Acad. Sci., 2019, 116, 9, 3562-3571). The principal difference between those peptides is in their C- and N-terminals. Since Huntington’s disease is related to the aggregation of proteins containing consecutive polyglutamine in their amino acid chains, the aim was to investigate if smaller amounts of disaccharides could reduce aggregation of two peptides from the Htt protein. Computational results revealed that both sugars alter the secondary structures of peptides and decrease the total number of contacts (the sum of hydrophobic contacts and hydrogen bonds) between these biomolecules. However, regarding only the number of hydrogen bonds, the disaccharides reduced this value for peptide-peptide interactions for 6N8C, while for 2LD2 sucrose and trehalose instead promoted an increase of this number. Such a difference in behaviors of peptides could be related to dissimilarities in their sequences, pointing out the importance to consider amino-acid residues in C- and N-terminal when developing drugs. Furthermore, both disaccharides demonstrated abilities to slow down the dynamics of simulated mixtures, which was concluded from rotational correlation and self-intermediate scattering functions. Amino-acid residues MET(1), GLU(5), LYS(6), LYS(9), GLU(12), LYS(15), PHE(17) and GLN(18) are identified as the main candidate amino acids involved in interpeptide binding and binding to disaccharides, where the glutamic acid residues (GLU(5) and GLU(12)) had the highest number of hydrogen bonds with sucrose and trehalose.
- Open Access
- 7 December 2023
- Published by Royal Society of Chemistry (RSC) in Nanoscale
- Vol. 16 (2) , 777-794
On the interactions between RNA and titrateable lipid layers: implications for RNA delivery with lipid nanoparticles
We have investigated the interaction between a model system of DOPC/DLin-MC3-DMA, an ionisable lipid used in lipid nanoparticles for mRNA delivery, with different mRNAs and shown that the adsorption behaviour depends on the mRNA secondary structure.
- 7 December 2023
- Published by Royal Society of Chemistry (RSC) in Nanoscale
- Vol. 16 (2) , 777-794
Open AccessOn the interactions between RNA and titrateable lipid layers: implications for RNA delivery with lipid nanoparticles
We have investigated the interaction between a model system of DOPC/DLin-MC3-DMA, an ionisable lipid used in lipid nanoparticles for mRNA delivery, with different mRNAs and shown that the adsorption behaviour depends on the mRNA secondary structure.
- Open Access
- 31 July 2023
- Published by Royal Society of Chemistry (RSC) in Physical Chemistry Chemical Physics
- Vol. 25 (32) , 21215-21226
New insights into the protein stabilizing effects of trehalose by comparing with sucrose
3D visualization of the water covered myoglobin surface in the trehalose system. The white stick figures are trehalose molecules located outside the protein hydration layer.
- 31 July 2023
- Published by Royal Society of Chemistry (RSC) in Physical Chemistry Chemical Physics
- Vol. 25 (32) , 21215-21226
Open AccessNew insights into the protein stabilizing effects of trehalose by comparing with sucrose
3D visualization of the water covered myoglobin surface in the trehalose system. The white stick figures are trehalose molecules located outside the protein hydration layer.
- Open Access
- 10 July 2023
- Published by American Chemical Society (ACS) in ChemRxiv
On the interactions between RNA and titrateablelipid layers: Implications for RNA delivery with lipidnanoparticles
Characterising the interaction between cationic ionisable lipids (CIL) and nucleic acids (NA) is key to understand the process of RNA lipid nanoparticle (LNP) formation and release of NAs from LNPs. Here, we have used different surface techniques to reveal the effect of pH and NA type on the interaction with a model system of DOPC and the CIL DLin-MC3-DMA (MC3). At only 5 % MC3, differences in the structure and dynamics of the lipid layer were observed. Both pH and %MC3 were shown to affect the absorption behaviour of erythropoietin mRNA, polyadenylic acid (polyA) and polyuridylic acid (polyU). The adsorbed amount of all studied NAs was found to increase with decreasing pH and increasing %MC3 but with different effects on the lipid layer, which could be linked to the NA secondary structure. For polyA at pH 6, adsorption to the surface of the layer was observed, whereas for other conditions and NAs, penetration of the NA into the layer resulted in the formation of a multilayer structure. By comparison to simulations excluding the secondary structure, difference in adsorption behaviours between polyA and polyU could be observed, indicating that also the NA’s secondary structure affected the MC3-NA interactions.
- 10 July 2023
- Published by American Chemical Society (ACS) in ChemRxiv
Open AccessOn the interactions between RNA and titrateablelipid layers: Implications for RNA delivery with lipidnanoparticles
Characterising the interaction between cationic ionisable lipids (CIL) and nucleic acids (NA) is key to understand the process of RNA lipid nanoparticle (LNP) formation and release of NAs from LNPs. Here, we have used different surface techniques to reveal the effect of pH and NA type on the interaction with a model system of DOPC and the CIL DLin-MC3-DMA (MC3). At only 5 % MC3, differences in the structure and dynamics of the lipid layer were observed. Both pH and %MC3 were shown to affect the absorption behaviour of erythropoietin mRNA, polyadenylic acid (polyA) and polyuridylic acid (polyU). The adsorbed amount of all studied NAs was found to increase with decreasing pH and increasing %MC3 but with different effects on the lipid layer, which could be linked to the NA secondary structure. For polyA at pH 6, adsorption to the surface of the layer was observed, whereas for other conditions and NAs, penetration of the NA into the layer resulted in the formation of a multilayer structure. By comparison to simulations excluding the secondary structure, difference in adsorption behaviours between polyA and polyU could be observed, indicating that also the NA’s secondary structure affected the MC3-NA interactions.
- Open Access
- 31 March 2023
- Published by Elsevier in Chemistry and Physics of Lipids
- Vol. 253, 105294
Ionizable lipids penetrate phospholipid bilayers with high phase transition temperatures: perspectives from free energy calculations
- 31 March 2023
- Published by Elsevier in Chemistry and Physics of Lipids
- Vol. 253, 105294
Open AccessIonizable lipids penetrate phospholipid bilayers with high phase transition temperatures: perspectives from free energy calculations
- Open Access
- 28 April 2022
- Published by Royal Society of Chemistry (RSC) in RSC Advances
- Vol. 12 (21) , 13352-13366
Two statins and cromolyn as possible drugs against the cytotoxicity of Aβ(31–35) and Aβ(25–35) peptides: a comparative study by advanced computer simulation methods
In this work, possible effective mechanisms of cromolyn, atorvastatin and lovastatin on the cytotoxicity of Aβ(31–35) and Aβ(25–35) peptides were investigated by classical molecular dynamics and well-tempered metadynamics simulations. The results demonstrate that all the drugs affect the behavior of the peptides, such as their ability to aggregate, and alter their secondary structures and their affinity to a particular drug. Our findings from the computed properties suggest that the best drug candidate is lovastatin. This medicine inhibits peptide aggregation, adsorbs the peptides on the surface of the drug clusters, changes the secondary structure and binds to MET35, which has been seen as the reason for the toxicity of the studied peptide sequences. Moreover, lovastatin is the drug which previously has demonstrated the strongest ability to penetrate the blood–brain barrier and makes lovastatin the most promising medicine among the three investigated drugs. Atorvastatin is also seen as a potential candidate if its penetration through the blood–brain barrier could be improved. Otherwise, its properties are even better than the ones demonstrated by lovastatin. Cromolyn appears to be less interesting as an anti-aggregant from the computational data, in comparison to the two statins.
- 28 April 2022
- Published by Royal Society of Chemistry (RSC) in RSC Advances
- Vol. 12 (21) , 13352-13366
Open AccessTwo statins and cromolyn as possible drugs against the cytotoxicity of Aβ(31–35) and Aβ(25–35) peptides: a comparative study by advanced computer simulation methods
In this work, possible effective mechanisms of cromolyn, atorvastatin and lovastatin on the cytotoxicity of Aβ(31–35) and Aβ(25–35) peptides were investigated by classical molecular dynamics and well-tempered metadynamics simulations. The results demonstrate that all the drugs affect the behavior of the peptides, such as their ability to aggregate, and alter their secondary structures and their affinity to a particular drug. Our findings from the computed properties suggest that the best drug candidate is lovastatin. This medicine inhibits peptide aggregation, adsorbs the peptides on the surface of the drug clusters, changes the secondary structure and binds to MET35, which has been seen as the reason for the toxicity of the studied peptide sequences. Moreover, lovastatin is the drug which previously has demonstrated the strongest ability to penetrate the blood–brain barrier and makes lovastatin the most promising medicine among the three investigated drugs. Atorvastatin is also seen as a potential candidate if its penetration through the blood–brain barrier could be improved. Otherwise, its properties are even better than the ones demonstrated by lovastatin. Cromolyn appears to be less interesting as an anti-aggregant from the computational data, in comparison to the two statins.
- Open Access
- 20 April 2022
- Published by Royal Society of Chemistry (RSC) in Nanoscale
- Vol. 14 (18) , 6990-7002
Effect of encapsulated protein on the dynamics of lipid sponge phase: a neutron spin echo and molecular dynamics simulation study
We have investigated the encapsulation of two proteins in lipid sponge phase nanoparticles and shown that the membrane bending rigidity increase depends on the concentration of and specific interactions with the protein.
- 20 April 2022
- Published by Royal Society of Chemistry (RSC) in Nanoscale
- Vol. 14 (18) , 6990-7002
Open AccessEffect of encapsulated protein on the dynamics of lipid sponge phase: a neutron spin echo and molecular dynamics simulation study
We have investigated the encapsulation of two proteins in lipid sponge phase nanoparticles and shown that the membrane bending rigidity increase depends on the concentration of and specific interactions with the protein.