Rania Remmani
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Rania Remmani has a total of 29 co-authors. Here are the top co-authors by number of shared publications:
- Antonio Ruiz-Canales
Department of Engineering, Area of Agroforestry, Miguel Hernández University, Orihuela, Spain
5 shared publications - Marco Petrangeli Papini
Department of Chemistry, Sapienza University of Rome, Piazzale Aldo Moro 5, 00185 Rome, Italy
4 shared publications - Carmela Riccardi
Department of Technological Innovations and Safety of Plants, Products and Anthropic Settlements, National Institute for Insurance against Accidents at Work (INAIL), 00144 Rome, Italy
2 shared publications - Dámaris Núñez-Gómez
Plant Production and Microbiology Department, Miguel Hernández University, Ctra. Beniel km 3.2, 03312 Orihuela, Spain
2 shared publications - Giulia Simonetti
Department of Chemistry, University of Rome “La Sapienza”, 00185 Rome, Italy
2 shared publications - Ida Pettiti
Department of Chemistry, University of Rome “La Sapienza”, 00185 Rome, Italy
2 shared publications
Latest Publications
- Open Access
Dual-Activated Tamarix Gallica-Derived Carbons for Enhanced Glyphosate Adsorption: A Comparative Study of Phosphoric and Sulfuric Acid Activation
This study investigates the efficacy of activated carbons (ACs) derived from Tamarix gallica (TG) leaves for glyphosate removal from aqueous solutions. Two chemical activation methods, using phosphoric acid (H3PO4) and sulfuric acid (H2SO4), were compared to optimize adsorbent performance. The resulting materials, labeled AC-H3PO4 and AC-H2SO4, were comprehensively characterized using XRD, FTIR, SEM-EDS, BET analysis, and pHpzc determination, revealing distinct physicochemical properties. AC-H3PO4 exhibited a larger surface area (580.37 m2/g) and more developed pore structure compared to AC-H2SO4 (241.58 m2/g). Adsorption kinetics were best described by the pseudo-first-order model for both adsorbents. Isothermal studies demonstrated that AC-H3PO4 followed a pore-filling mechanism best described by the Dubinin–Radushkevich model, while AC-H2SO4 showed multilayer adsorption fitting the Freundlich model. Both adsorbents exhibited high glyphosate removal capacities, with maximum Langmuir adsorption capacities of 247.58 mg/g and 235.13 mg/g for AC-H3PO4 and AC-H2SO4, respectively. The mean free energy of adsorption (E) values confirmed physisorption as the dominant mechanism. This research highlights the potential of TG-derived activated carbons as sustainable and effective adsorbents for glyphosate remediation in water treatment applications, demonstrating the impact of activation methods on adsorption performance.
Open AccessDual-Activated Tamarix Gallica-Derived Carbons for Enhanced Glyphosate Adsorption: A Comparative Study of Phosphoric and Sulfuric Acid Activation
This study investigates the efficacy of activated carbons (ACs) derived from Tamarix gallica (TG) leaves for glyphosate removal from aqueous solutions. Two chemical activation methods, using phosphoric acid (H3PO4) and sulfuric acid (H2SO4), were compared to optimize adsorbent performance. The resulting materials, labeled AC-H3PO4 and AC-H2SO4, were comprehensively characterized using XRD, FTIR, SEM-EDS, BET analysis, and pHpzc determination, revealing distinct physicochemical properties. AC-H3PO4 exhibited a larger surface area (580.37 m2/g) and more developed pore structure compared to AC-H2SO4 (241.58 m2/g). Adsorption kinetics were best described by the pseudo-first-order model for both adsorbents. Isothermal studies demonstrated that AC-H3PO4 followed a pore-filling mechanism best described by the Dubinin–Radushkevich model, while AC-H2SO4 showed multilayer adsorption fitting the Freundlich model. Both adsorbents exhibited high glyphosate removal capacities, with maximum Langmuir adsorption capacities of 247.58 mg/g and 235.13 mg/g for AC-H3PO4 and AC-H2SO4, respectively. The mean free energy of adsorption (E) values confirmed physisorption as the dominant mechanism. This research highlights the potential of TG-derived activated carbons as sustainable and effective adsorbents for glyphosate remediation in water treatment applications, demonstrating the impact of activation methods on adsorption performance.
- Open Access
- 14 December 2024
- Published by MDPI AG in Environments
- Vol. 11 (12) , 288
Superior Adsorption of Chlorinated VOC by Date Palm Seed Biochar: Two-Way ANOVA Comparative Analysis with Activated Carbon
This study explores biochar (BC) derived from date palm seeds as a high-performance adsorbent for the removal of trichloroethylene (TCE) and tetrachloroethylene (PCE) from aqueous solutions, with comparative analysis against commercial activated carbon (AC). The optimized BC, characterized by a high BET surface area of 654.79 m2/g and unique nanotube morphology, demonstrated superior adsorption capacities of 86.68 mg/g for TCE and 85.97 mg/g for PCE, significantly surpassing the AC under identical conditions. Kinetic studies identified the pseudo-second-order model as the best fit, indicating chemisorption as the dominant mechanism. Isotherm modeling revealed a combination of multilayer and monolayer adsorption processes, underscoring the complexity of the BC’s adsorption behavior. Statistical analysis via two-way ANOVA further validated the BC’s significant superiority over the AC (p < 0.0001) for both contaminants. These results highlight the potential of date-palm-seed-derived biochar as a sustainable and cost-effective adsorbent for eco-friendly water treatment, emphasizing its role in reducing environmental impact and operational costs in real-world applications.
- 14 December 2024
- Published by MDPI AG in Environments
- Vol. 11 (12) , 288
Open AccessSuperior Adsorption of Chlorinated VOC by Date Palm Seed Biochar: Two-Way ANOVA Comparative Analysis with Activated Carbon
This study explores biochar (BC) derived from date palm seeds as a high-performance adsorbent for the removal of trichloroethylene (TCE) and tetrachloroethylene (PCE) from aqueous solutions, with comparative analysis against commercial activated carbon (AC). The optimized BC, characterized by a high BET surface area of 654.79 m2/g and unique nanotube morphology, demonstrated superior adsorption capacities of 86.68 mg/g for TCE and 85.97 mg/g for PCE, significantly surpassing the AC under identical conditions. Kinetic studies identified the pseudo-second-order model as the best fit, indicating chemisorption as the dominant mechanism. Isotherm modeling revealed a combination of multilayer and monolayer adsorption processes, underscoring the complexity of the BC’s adsorption behavior. Statistical analysis via two-way ANOVA further validated the BC’s significant superiority over the AC (p < 0.0001) for both contaminants. These results highlight the potential of date-palm-seed-derived biochar as a sustainable and cost-effective adsorbent for eco-friendly water treatment, emphasizing its role in reducing environmental impact and operational costs in real-world applications.
- Open Access
- 15 October 2024
- Published by MDPI AG in Preprints.org
Superior Adsorption of Chlorinated VOC by Date Palm Seed Biochar: A Two-Way ANOVA Comparative Analysis with Activated Carbon
This study investigates biochar (BC) derived from date palm seeds as a high-performance ad-sorbent for trichloroethylene (TCE) and tetrachloroethylene (PCE) removal from aqueous solu-tions, comparing its efficacy to commercial activated carbon (AC). The optimized BC exhibits a high BET surface area of 654.79 m²/g and a unique nanotube morphology. Kinetic studies indicate that the pseudo-second-order model best describes the adsorption process, with BC achieving capacities of 86.68 mg/g for TCE and 85.97 mg/g for PCE, significantly outperforming AC. Isotherm analysis suggests a complex adsorption mechanism involving both multilayer and monolayer adsorption. Two-way ANOVA confirms the significant superiority of BC over AC (p < 0.0001) for both CVOCs. The enhanced performance of BC is attributed to its high surface area, well-developed microporosity, and advanced surface chemistry. This study highlights the promise of date palm seed-derived biochar as a sustainable, high-performance adsorbent for eco-friendly water treatment solutions, potentially reducing operational costs and environmental impact in real-world applications.
- 15 October 2024
- Published by MDPI AG in Preprints.org
Open AccessSuperior Adsorption of Chlorinated VOC by Date Palm Seed Biochar: A Two-Way ANOVA Comparative Analysis with Activated Carbon
This study investigates biochar (BC) derived from date palm seeds as a high-performance ad-sorbent for trichloroethylene (TCE) and tetrachloroethylene (PCE) removal from aqueous solu-tions, comparing its efficacy to commercial activated carbon (AC). The optimized BC exhibits a high BET surface area of 654.79 m²/g and a unique nanotube morphology. Kinetic studies indicate that the pseudo-second-order model best describes the adsorption process, with BC achieving capacities of 86.68 mg/g for TCE and 85.97 mg/g for PCE, significantly outperforming AC. Isotherm analysis suggests a complex adsorption mechanism involving both multilayer and monolayer adsorption. Two-way ANOVA confirms the significant superiority of BC over AC (p < 0.0001) for both CVOCs. The enhanced performance of BC is attributed to its high surface area, well-developed microporosity, and advanced surface chemistry. This study highlights the promise of date palm seed-derived biochar as a sustainable, high-performance adsorbent for eco-friendly water treatment solutions, potentially reducing operational costs and environmental impact in real-world applications.
- 5 October 2024
- Published by Springer Nature in Environmental Science and Pollution Research
- Vol. 31 (50) , 60065-60079
Optimized pyrolytic synthesis and physicochemical characterization of date palm seed biochar: unveiling a sustainable adsorbent for environmental remediation applications
This study focuses on the optimization and comprehensive characterization of biochar synthesized from date palm seeds (DPS), a prevalent agricultural waste in arid regions. Using response surface methodology (RSM) with a central composite design (CCD), we optimized the pyrolysis process by investigating the effects of time (1–3 h) and temperature (600–900 °C) on critical properties such as specific surface area, pore volume, and yield. The optimized biochar, produced at 828 °C for 1.7 h, demonstrated a high specific surface area of 654.8 m2/g and well-developed microporosity. Characterization techniques, including XRD, FTIR, SEM–EDS, and BET analyses, revealed an amorphous carbon structure with graphitic domains, diverse surface functionalities, and a heterogeneous porous microstructure. The biochar’s point of zero charge at pH 7.58 indicates its potential for selective adsorption of charged contaminants. The close agreement between RSM-predicted and experimental values for specific surface area (652.1 m2/g vs. 654.8 m2/g) and micropore volume (0.191 cm3/g vs. 0.190 cm3/g) validates the effectiveness of the model in optimizing biochar properties. This research highlights the potential of DPS-derived biochar as a sustainable adsorbent for environmental remediation, opening avenues for valorizing agricultural wastes and contributing to circular economy principles.
- 5 October 2024
- Published by Springer Nature in Environmental Science and Pollution Research
- Vol. 31 (50) , 60065-60079
Optimized pyrolytic synthesis and physicochemical characterization of date palm seed biochar: unveiling a sustainable adsorbent for environmental remediation applications
This study focuses on the optimization and comprehensive characterization of biochar synthesized from date palm seeds (DPS), a prevalent agricultural waste in arid regions. Using response surface methodology (RSM) with a central composite design (CCD), we optimized the pyrolysis process by investigating the effects of time (1–3 h) and temperature (600–900 °C) on critical properties such as specific surface area, pore volume, and yield. The optimized biochar, produced at 828 °C for 1.7 h, demonstrated a high specific surface area of 654.8 m2/g and well-developed microporosity. Characterization techniques, including XRD, FTIR, SEM–EDS, and BET analyses, revealed an amorphous carbon structure with graphitic domains, diverse surface functionalities, and a heterogeneous porous microstructure. The biochar’s point of zero charge at pH 7.58 indicates its potential for selective adsorption of charged contaminants. The close agreement between RSM-predicted and experimental values for specific surface area (652.1 m2/g vs. 654.8 m2/g) and micropore volume (0.191 cm3/g vs. 0.190 cm3/g) validates the effectiveness of the model in optimizing biochar properties. This research highlights the potential of DPS-derived biochar as a sustainable adsorbent for environmental remediation, opening avenues for valorizing agricultural wastes and contributing to circular economy principles.
- Open Access
Adsorption Technology for PFAS Removal in Water: Comparison between Novel Carbonaceous Materials
PFASs are a variety of ecologically persistent compounds of anthropogenic origin loosely included in many industrial products. In these, the carbon chain can be fully (perfluoroalkyl substances) or partially (polyfluoroalkyl substances) fluorinated. Their ubiquitous presence in many environmental compartments over the years and their long-lasting nature have given rise to concerns about the possible adverse effects of PFASs on ecosystems and human health. Among a number of remediation technologies, adsorption has been demonstrated to be a manageable and cost-effective method for the removal of PFASs in aqueous media. This study tested two novel and eco-friendly adsorbents (pinewood and date seeds biochar) on six different PFASs (PFOS, GenX, PFHxA, PFOA, PFDA, and PFTeDA). Batch sorption tests (24 h) were carried out to evaluate the removal efficiency of each PFAS substance in relation to the two biochars. All samples of liquid phase were analyzed by a developed and then a well-established method: (i) pre-treatment (centrifugation and filtration) and (ii) determination by high-performance liquid chromatography coupled with mass spectrometry (HPLC-MS/MS). The results evidenced a comparable adsorption capacity in both materials but greater in the long-chain PFASs. Such findings may lead to a promising path towards the use of waste-origin materials in the PFAS remediation field.
Open AccessAdsorption Technology for PFAS Removal in Water: Comparison between Novel Carbonaceous Materials
PFASs are a variety of ecologically persistent compounds of anthropogenic origin loosely included in many industrial products. In these, the carbon chain can be fully (perfluoroalkyl substances) or partially (polyfluoroalkyl substances) fluorinated. Their ubiquitous presence in many environmental compartments over the years and their long-lasting nature have given rise to concerns about the possible adverse effects of PFASs on ecosystems and human health. Among a number of remediation technologies, adsorption has been demonstrated to be a manageable and cost-effective method for the removal of PFASs in aqueous media. This study tested two novel and eco-friendly adsorbents (pinewood and date seeds biochar) on six different PFASs (PFOS, GenX, PFHxA, PFOA, PFDA, and PFTeDA). Batch sorption tests (24 h) were carried out to evaluate the removal efficiency of each PFAS substance in relation to the two biochars. All samples of liquid phase were analyzed by a developed and then a well-established method: (i) pre-treatment (centrifugation and filtration) and (ii) determination by high-performance liquid chromatography coupled with mass spectrometry (HPLC-MS/MS). The results evidenced a comparable adsorption capacity in both materials but greater in the long-chain PFASs. Such findings may lead to a promising path towards the use of waste-origin materials in the PFAS remediation field.
- Open Access
- 9 July 2024
- Published by MDPI AG in Preprints.org
Adsorption Technology For PFAS Removal In Water: Comparison Between Novel Carbonaceous Materials
PFAS are a variety of ecologically persistent compounds of anthropogenic origin loosely included in many industrial products, in which the carbon chain can be fully (perfluoroalkyl substances) or partially (polyfluoroalkyl substances) fluorinated. Their ubiquitous presence in many environmental compartments over the years, and highly long-lasting nature, arose concern because of the possible adverse effects of PFAS on ecosystem and human health. Between the remediation technologies, adsorption has been demonstrated to be a maneageble and cost-effective method for the removal of PFAS in aqueous media. This study tested two novel and eco-friendly adsorbents (pinewood and date seeds biochar) on 6 different PFAS (PFOS, GenX, PFHxA, PFOA, PFDA, PFTeDA). Batch sorption tests (24 hours) were carried out to evaluate the removal efficiency of each PFAS substance in relation to the two biochars. All samples of liquid phase were analysed by a developed and then well-established method: i) pre-treatment (centrifugation and filtration); ii) determination by high-performance liquid chromatography coupled with mass spectrometry (HPLC-MS/MS). Results evidenced a comparable adsorption capacity of both materials, but greater for the long-chain PFAS. Such findings may lead to a promising path for the use of waste origin materials in the PFAS remediation field.
- 9 July 2024
- Published by MDPI AG in Preprints.org
Open AccessAdsorption Technology For PFAS Removal In Water: Comparison Between Novel Carbonaceous Materials
PFAS are a variety of ecologically persistent compounds of anthropogenic origin loosely included in many industrial products, in which the carbon chain can be fully (perfluoroalkyl substances) or partially (polyfluoroalkyl substances) fluorinated. Their ubiquitous presence in many environmental compartments over the years, and highly long-lasting nature, arose concern because of the possible adverse effects of PFAS on ecosystem and human health. Between the remediation technologies, adsorption has been demonstrated to be a maneageble and cost-effective method for the removal of PFAS in aqueous media. This study tested two novel and eco-friendly adsorbents (pinewood and date seeds biochar) on 6 different PFAS (PFOS, GenX, PFHxA, PFOA, PFDA, PFTeDA). Batch sorption tests (24 hours) were carried out to evaluate the removal efficiency of each PFAS substance in relation to the two biochars. All samples of liquid phase were analysed by a developed and then well-established method: i) pre-treatment (centrifugation and filtration); ii) determination by high-performance liquid chromatography coupled with mass spectrometry (HPLC-MS/MS). Results evidenced a comparable adsorption capacity of both materials, but greater for the long-chain PFAS. Such findings may lead to a promising path for the use of waste origin materials in the PFAS remediation field.
- Open Access
- 15 February 2024
- Published by Wiley in Food Science & Nutrition
- Vol. 12 (4) , 2886-2895
Physical properties and mass models of Deglet Noor and Arichti semi‐dry Algerian date fruits: A comparative study
For thousands of years, date fruit (Phoenix dactylifera L.) has been a popular diet in arid and semi-arid locations. It has religious importance for Muslims and is especially important during the holy month of Ramadan. The global output of date fruits has been continuously expanding, with Arab nations accounting for a sizable portion. The emphasis of this research is on two popular semi-dry Algerian date fruit types, Deglet Noor and Arechti, which are grown in the Ziban region. These fruits' physical parameters, such as size, sphericity, surface area, volumes, and density, were determined. The goal of this study was to create a mass model based on these physical attributes to help in the grading and sorting of date fruits. Fruit mass was shown to be closely connected to linear dimensions, arithmetic and geometric mean diameters, surface area, and volumes. Correlations between mass and physical attributes were established using a variety of mathematical models, including linear, quadratic, S-curve, and power models. The results demonstrated the applicability of specific factors for mass modeling, offering useful insights for the development of system sizing and conservation. With good correlation, multivariate data analysis was employed to correctly estimate the mass of both kinds. This research advances our understanding of the physical features of Algerian date fruits and their connection to mass, allowing for better handling, sorting, and packing processes in the worldwide date market.
- 15 February 2024
- Published by Wiley in Food Science & Nutrition
- Vol. 12 (4) , 2886-2895
Open AccessPhysical properties and mass models of Deglet Noor and Arichti semi‐dry Algerian date fruits: A comparative study
For thousands of years, date fruit (Phoenix dactylifera L.) has been a popular diet in arid and semi-arid locations. It has religious importance for Muslims and is especially important during the holy month of Ramadan. The global output of date fruits has been continuously expanding, with Arab nations accounting for a sizable portion. The emphasis of this research is on two popular semi-dry Algerian date fruit types, Deglet Noor and Arechti, which are grown in the Ziban region. These fruits' physical parameters, such as size, sphericity, surface area, volumes, and density, were determined. The goal of this study was to create a mass model based on these physical attributes to help in the grading and sorting of date fruits. Fruit mass was shown to be closely connected to linear dimensions, arithmetic and geometric mean diameters, surface area, and volumes. Correlations between mass and physical attributes were established using a variety of mathematical models, including linear, quadratic, S-curve, and power models. The results demonstrated the applicability of specific factors for mass modeling, offering useful insights for the development of system sizing and conservation. With good correlation, multivariate data analysis was employed to correctly estimate the mass of both kinds. This research advances our understanding of the physical features of Algerian date fruits and their connection to mass, allowing for better handling, sorting, and packing processes in the worldwide date market.
- Open Access
Optimization of Ultrasound-Assisted Extraction of Spent Coffee Grounds Oil Using Response Surface Methodology
Spent coffee grounds (SCGs) generated in coffee processing for beverages and other products are a very significant organic residue that needs to be properly treated. Waste valorization via oil extraction has the potential to obtain compounds that can be used for producing biodiesel or other high-value products, such as polymers. This work focuses on the ultrasound-assisted extraction of SCG oil using n-hexane as a solvent. Three key process parameters are analyzed: temperature, extraction time, and liquid/solid (L/S) rate of solvent, using a central composite rotatable design (CCRD), an analysis that, to the author’s knowledge, is not yet available in the literature. The data were analyzed using the software StatSoft STATISTICA 13.1 (TIBCO Software Inc., Palo Alto, CA, USA). Results show that all parameters have a statistical influence on the process performance (p < 0.05), being the L/S ratio the most significant, followed by extraction time and temperature. An analysis of variance (ANOVA) showed that the empirical model is a good fit to the experimental data at a 95% confidence level. For the range of conditions considered in this work, the optimal operating conditions for obtaining an oil extraction yield in the range of 12 to 13%wt are a solvent L/S ratio of around 16 mL g−1, for a temperature in the range of 50 to 60 °C, and the longest contact time, limited by the process economics and health and safety issues and also, by the n-hexane boiling temperature.
Open AccessOptimization of Ultrasound-Assisted Extraction of Spent Coffee Grounds Oil Using Response Surface Methodology
Spent coffee grounds (SCGs) generated in coffee processing for beverages and other products are a very significant organic residue that needs to be properly treated. Waste valorization via oil extraction has the potential to obtain compounds that can be used for producing biodiesel or other high-value products, such as polymers. This work focuses on the ultrasound-assisted extraction of SCG oil using n-hexane as a solvent. Three key process parameters are analyzed: temperature, extraction time, and liquid/solid (L/S) rate of solvent, using a central composite rotatable design (CCRD), an analysis that, to the author’s knowledge, is not yet available in the literature. The data were analyzed using the software StatSoft STATISTICA 13.1 (TIBCO Software Inc., Palo Alto, CA, USA). Results show that all parameters have a statistical influence on the process performance (p < 0.05), being the L/S ratio the most significant, followed by extraction time and temperature. An analysis of variance (ANOVA) showed that the empirical model is a good fit to the experimental data at a 95% confidence level. For the range of conditions considered in this work, the optimal operating conditions for obtaining an oil extraction yield in the range of 12 to 13%wt are a solvent L/S ratio of around 16 mL g−1, for a temperature in the range of 50 to 60 °C, and the longest contact time, limited by the process economics and health and safety issues and also, by the n-hexane boiling temperature.
- Open Access
- 5 February 2021
- Published by HARD Publishing Company in Polish Journal of Environmental Studies
- Vol. 30 (2) , 1801-1808
Development of Low-Cost Activated Carbon towards an Eco-Efficient Removal of Organic Pollutants from Oily Wastewater
The current study seeks to investigate the feasibility use of date palm kernels for the development of activated carbon (AC) towards its application, which functions as an adsorbent to treat oil-contaminated groundwater. Biochar derived from date palm kernels (BPK), was prepared by direct pyrolysis of the raw precursor at 600ºC for 90 minutes (in oxygen-limited condition). Activated carbon (ACPK) included similar pyrolysis conditions of biochar with subsequent impregnation in H2SO4 (as activating agent) at a ratio of acid: biochar (1:1), moderate temperature. The analytical approach was performed through the use of XRD, BET, and FTIR, techniques to evaluate the effect of carbonization and activation process in improving the adsorptive properties of starting materials. Carbonaceous adsorbents obtained were highly porous due to their elevated specific surface area of (333.4 m²/g for BPK and 741.5 m²/g for ACPK) and their amorphous structure. Indeed, the textural proprieties were significantly improved by the acidic treatment. Further, the adsorption behavior of produced materials was tested by performing batch adsorption tests in contaminated water samples using a ratio of 1:1 (g/L) for 24 hours. The efficiency of adsorbents was evaluated by COD (C0 = 8568 mg/L), BOD5 (C0 = 200 mg/L) concentration, pH and hardness values before and after the treatment. Removal efficiency of COD for the BPK and ACPK samples reached 82.6% and 95.2% respectively, while for BOD5 was the same (97.0%) for both adsorbents. Additionally, the treated water sample has the same excellent class suitable for irrigation applications according to the Wilcox diagram. In consequence, the present study suggests an effective, eco-friendly and economical adsorption process intending to mitigate environmental risk sustainably.
- 5 February 2021
- Published by HARD Publishing Company in Polish Journal of Environmental Studies
- Vol. 30 (2) , 1801-1808
Open AccessDevelopment of Low-Cost Activated Carbon towards an Eco-Efficient Removal of Organic Pollutants from Oily Wastewater
The current study seeks to investigate the feasibility use of date palm kernels for the development of activated carbon (AC) towards its application, which functions as an adsorbent to treat oil-contaminated groundwater. Biochar derived from date palm kernels (BPK), was prepared by direct pyrolysis of the raw precursor at 600ºC for 90 minutes (in oxygen-limited condition). Activated carbon (ACPK) included similar pyrolysis conditions of biochar with subsequent impregnation in H2SO4 (as activating agent) at a ratio of acid: biochar (1:1), moderate temperature. The analytical approach was performed through the use of XRD, BET, and FTIR, techniques to evaluate the effect of carbonization and activation process in improving the adsorptive properties of starting materials. Carbonaceous adsorbents obtained were highly porous due to their elevated specific surface area of (333.4 m²/g for BPK and 741.5 m²/g for ACPK) and their amorphous structure. Indeed, the textural proprieties were significantly improved by the acidic treatment. Further, the adsorption behavior of produced materials was tested by performing batch adsorption tests in contaminated water samples using a ratio of 1:1 (g/L) for 24 hours. The efficiency of adsorbents was evaluated by COD (C0 = 8568 mg/L), BOD5 (C0 = 200 mg/L) concentration, pH and hardness values before and after the treatment. Removal efficiency of COD for the BPK and ACPK samples reached 82.6% and 95.2% respectively, while for BOD5 was the same (97.0%) for both adsorbents. Additionally, the treated water sample has the same excellent class suitable for irrigation applications according to the Wilcox diagram. In consequence, the present study suggests an effective, eco-friendly and economical adsorption process intending to mitigate environmental risk sustainably.